M3 Mobile MM3 Portable Data Collection Terminal User Manual 2

M3 Mobile Co., Ltd Portable Data Collection Terminal 2

User Manual 2

Via HSDPA (1)etzTo connect to the Internet via Wireless WAN (1)se Interneow to usHTab ‘Start > Settings > Connections’ Select ‘Add a new modem connection’ of ‘My ISP’ in the ‘Connections’. Put the name you want into the‘Enter a name for the connection’. Then select the ‘cellular Line(GPRS)’ Then select the cellular Line(GPRS) in the ‘Select a modem’.31WWAN service is optional.It is not available in the device which does not have WWAN module installed.
Via HSDPA (2)zTo connect to the Internet via Wireless WAN (2)etse Interneow to usHInput the Access point name suitable to the SIM Card / Operatorcompany of Network then Tab the‘Next’.Tap the ‘Finish’ after input the User name and passwordaccording to the setting.(In some cases, it is required toSelect the ‘Manage existing connections’ on the Connections. Choose the ISP which you want to connect to as picture above.* Th d tti t ti ll li dYou can explore the Internet using WWAN connection.32(,qset IP address at the advancedmenu.)* The saved settings automatically appliedat connecting.
Via Wireless WLAN (1)etzYou can use the Wireless Network Via Wireless LAN. zMM3 supports IEEE 802.11a, IEEE 802.11b and 802.11g. zTo connect the Wireless LAN (AP must be on and functioning)To connect directly on the Main Screense Interneow to usHOn the Today Main screen, you selectWireless state bar or go to ‘Start > S tti > C ti >’ Wi l MTap the WI-Fi on the ‘Wireless Manager' to turn WLAN on. When the dialogue box is appeared, Select the AP you want andthen, you can connect the Network with it. 33Wireless LAN is optional. You can only use WLAN, when the WLAN module is built in to the device. Settings > Connections>’ Wireless Manager. g,y
Via Wireless WLAN (2)zTo connect via Wi-Fi menuetse Interneow to usHOn the settings screen, you select WiFi IconConfigure the connect type thenclick the'Next'After configure Network authentification, tap the'Finish'You can see the wireless34Wi-Fi Icon. You can also tap Start > Settings >Connections>Wi-Fi. click the Next. tap the Finish. You can see the wirelessNetworks available.
Via Wireless WLAN (3)zContinue from the last page–Configure DHCP / Static IPetse Interneow to usH35
Browsing the Web Site (1)etzMicrosoft Internet Explorer- Via Wireless WAN , Wireless LAN and Active sync connection, you can browse the web.- You can download programs and files by accessing the Internet.se InterneTo use the Internet Explorer Address Window Searchingow to usHTap 'Start > Internet ExplorerThis is the Internet ExplorerItthdd tthdd idi fth th36Tap 'Start > Internet ExplorerThis is the Internet Explorer processing screen.Input the address you want on the address window in upper of the screen, thenclick the 'search'. It will try to connect to that web address via Wireless networkthat is connected.
Browsing the Web Site (2)zContinue from the last page.etse Interneow to usHOn the 'Menu > Favorites...' you can see the list of sites that you have saved and browse to it directly. The favorite page is like the picture above.On the Menu > History... You can see the list of sites that you haverecently visited. The history page is like the picture above.37 See the 'Start > Help' if you want to know more about how to use the Internet Explorer
Browsing the Web Site (3)zTo set up an e-mail account etse Interneow to usHProcess the 'Start > Messaging'. Select the'Menu > Tools > New Account...in the outlook Set an E-mail provider for 'other‘then tap 'Next.' Input the E-mail address on theEnter e-mail address , then tap ‘ When the Status is for completed,tap the 'Next'.38E-mail box. Next '.p
Browsing the Web Site (4)zContinue from last pageetse Interneow to usHSet an E-mail provider for 'other‘then tap 'Next'. Select the Account Type and putthe Name then tap 'Next'. Input the 'Incoming mail, Outgoingmail, Domain' then select 'Finish'.* For detailed setting menu, pleaseclick‘Options’.After finishing the setting you can send andreceive E-mail using the e-mail account.39click Options .
Browsing the Web Site (5)zTo send and receive an E-mailetse Interneow to usH< To receive an e-mail>Select the 'Message' on the 'Today'Select the 'Send / Receive' in the 'Menu' and check the received mail.<To send an e-mail>After process the 'Message' program , select the 'New' . You can send an e-mail when you select the 'Send' after writing a newe-mail.40
5 How to use the Phone5. How to use the PhoneInit ScreenPhone ControlPhone call and receive Phone bookSMS send and receive Phone functionsPhone setting41
Init ScreenonezPhone Main ScreenGSM Operator Network TypeHSDPA / Network Status GSM Operator It indicates the current Network Provider.e the PhoVolumeCall StatusInput NumberCall Status It shows Call Status.Input Number It shows Inputted Numbers.Key PadIt is used to dial the number and can be used ow to useInput NumberKey Pad Phone MenuKey Padas speed-dial.Contact It shows Phone Book Dialog.Network Type It displays the availability of GPRS and EDGE / HSDPA connection.HoContactsGSM/Network Status It indicates the signal strength.Volume It is Volume on/off and vibratePhone MenuTalk End Speed Dial Call History etc menu42Phone MenuTalk, End, Speed Dial, Call History, etc menu…
Phone ControlzPhone Program On/OffonezPhone Call Send/EndSENDENDe the PhoSENDENDow to useSelect the SEND and END button likeHoYou can turn on and off phonein Wireless Manager Tap the Phone button on the left bottom of the Today Screen and then you can process thePh Al fi i h ththe picture above to start and finishthe Phone program.43Phone program. Also you can finish the programusing the X button.
Phone Call and Receive zPhone Callonee the Phoow to useHoTo make a call:1.Input number via program keypad or device keypad.2 Make a call by pressing the‘Talk’To hang up:Press the ‘END’ button on the program or on the device.442.Make a call by pressing the Talkbutton on the program, or pressing‘SEND’ button on the device.
PhonebookzTo use PhonebookoneSearchingA name orSearching Contacts You can search the contacts by writing the name and number or tapping.New Contact Input the new contactNew SIM Contact Input the contact to the SIM Card.e the PhoNumber.ContactsMenuSend ContactTransmit the information of Contact by BEAM or SMS.Copy/Delete Copy or delete the ContactOptions Set the Options for Contact.Vi BSee the Contact by Type ( Name , Company,ow to useView BySee the Contact by Type ( Name , Company, Number … )Filter Filter the information you want.Call W/H/M Call by the number on the Contact.Send E-mail Send an E-mail by the address on the Contact.HoContacts Menu Contacts Option ContactsOptionSend SMS Send SMS by the number on the Contact.Add to Speed Dial Add the number on the Contact to Speed Dial.Send Contact Send the information of Contact by BEAM or SMS.C/DltCdDltthCtt45Copy/DeleteCopy and Delete the Contact.
SMS send and receivezHow to send SMSonee the Phoow to useHoSelect ‘message information’ menu on the main screen to send SMS. You can also send SMS by selecting ‘SMS send’ menu on Contacts or anyother applicationsChange to the ‘Text Messages’ on the Message Program like the picture above and tap the ‘New’ on the bottom.Input the phone number and message. Tap the send to sendSMS.You can see the pop-up screen when SMS is sent successfully.46other applications.
6 Usage of Device6. Usage of DeviceCameraBluetoothGPSScanner
To use the Camera (1)zNotice before taking pictures- The camera equipped with the MM3 is supported 2 mega pixels.Function Still Video Commentof DeviceMode Normal, Burst, Timer N/A Setting for taking photoBrightness -3, -2, -1, 0, +1, +2, +3 Setting for BrightnessUsage oResolution QCIF, QVGA, CIF, VGA ,SVGA, SXGA, UXGA QCIF, QVGA Setting for sizeWhite Balance Automatic, Sunny, Cloudy, Fluorescent, Incandescent Setting for White balanceSetting for FlashFlash Flash ON, Flash OFF Setting for Flash ON/OFFAF Trig AF Setting for Auto FocusCamera Program Processing ScreenCamera is optional. On the device with no built-in camera, Camera function can not be used.QCIF(176x144), QVGA(320x240), CIF(352x288), VGA(640x480), SVGA(800x600)SXGA(1280x960), UXGA(1600x1200)48
To use the camera (2)zTo process the camera program- You can process the camera program when you tap the camera button or tap the camera icon on the'picture or video'.eof DeviceUsage oSelect the 'Start > Programs > Pictures & Video. You can process the camera program when you select the camera icon on the Picture & Video or select the camera icon in the menu.49 Tap the ‘Menu > Options … > Camera Tab’ and then you can set the route of the storage memory , name and quality. You can set the Video on the Video Tab.
To use the camera (3)zTaking a Still photoof DeviceUsage oExecute the camera program first. Move around to focus the desireditem. Finally press the camera button to take a picture.After executing the camera program , Preview mode will be changed to standby mode after certain amount of time. In order to start Preview Mode again just tap the screen or press theAfter taking a picture, the captured image will be displayed on the screen.If you want to execute the camera program, tap the camera button at thebottom or click the camera icon on the left of window.You can see the list of pictures taken previously by tapping ‘Thumbnails’ inthe Camera shooting mode.50In order to start Preview Mode again, just tap the screen or press thecamera button.
To use the camera (4)zTaking videosof DeviceUsage oIf you want to take a video, select ‘Menu > Videos' after executing the camera program. While taking a video, you can either stop (by tapping stopbutton) or pause. (by tappingpause button)If you want to watch the video taken, Select the 'Thumbnails' firstto see the list of video files available.When you select the video you want, you can play the videorecorded.51
Bluetooth Communication (1)zBluetooth On / Offof DeviceUsage oOn the 'Today Main Screen' , select the Wireless State bar or Tap 'Start > Settings > Connections and select ‘Wireless Manager’.To turn on/off Bluetooth, tap the Bluetooth on the Wireless ManageThe status of Bluetooth can be seen on the wireless status bar on the main screen.52Bluetooth is optional. Device without built-in Bluetooth can not use Bluetooth service.Bluetooth support the transmission and reception of files between the serial connecting service and Windows Mobile device.
Bluetooth Communication (2)zSetting the Bluetooth-On the Bluetooth setting screen, you can set the Mode, connecting to BT device and COM settingsof DeviceUsage oYou can set the Bluetooth mode and establish connection when you tap the 'Bluetooth' icon on the Start > Settings > Connections.In the device tab, you can search and connect to other Bluetoothdevices.In the COM Ports tab, you canset incoming Port and outgoingPort.53
Bluetooth Communication (3)zTo connect the Bluetooth- you can establish the connection by searching, matching pin code and selecting the service.of DeviceUsage oYou can search the Bluetooth deviceavailable when you select the 'Addnew device...' on the Device Tab.Select a device to connect with andEnter a Passcode to establish a secure connection.The passcode can be fixed one or the one which is negotiatedIt shows the service available on the Bluetooth device. It shows the registered devices.To add more device, please tab‘Add new device’.54Select a device to connect with andtap 'Next' . Also you can selectthe 'Refresh' button if there is nodevice available.or the one which is negotiatedbetween two parties in beforehand.
Bluetooth Communication (4)zTransferring files via Bluetooth connection.- It is possible to transfer files between Windows Mobile devices via Bluetooth.of DeviceUsage oIn order to transfer files via Bluetoothconnection please go to'Start > Settings >Select the file you want to transfer in the File Explorer Press the fileBy tapping ‘Beam File’, the list of available Bluetooth devicesshown Please choose the device to transfer the file to55connection, please go to Start > Settings >Connections > Beam‘ and then Checkthe 'Receive all incoming Beams ‘.in the File Explorer. Press the filename long and tab ‘Beam File’.shown. Please choose the device to transfer the file to.
To use the GPSzTo set the GPS–Tap the ‘Start > Settings > System Tab > GPS’ and then you can set the information related to the GPS.–You don’t have to set additional information when there is a single program which uses GPS data. WhentherearemorethanoneprogramwhichuseGPSdata,youneedtosettheprogramportandhardwaretherearemorethanoneprogramwhichuseGPSdata,youneedtosettheprogramportandhardwareport required for each program.of DeviceUsage oSelect the GPS on the System Tab.Setthe GPS Program Portwhich Set the Hardware port of the device.56Select the GPS on the System Tab.gis not yet used. GPS hardware port for MM3 isCOM2 and with baud rate of 9600.GPS is optional. GPS feature is not available on the unit with no GPS module integrated.
To use the Scanner (1)zTo scan the barcode, there are two scanner programs installed on the device1M3ScanTest1.M3 ScanTest-It is a sample test program. It is only for testing the scanning feature of the device.It can not be used for business application.of Device2. ScanEmul-It is a program which can be used to output the scanned data on the application.(like MS Word-Pad Internet Explorer or Business Application)Usage o(like MS WordPad, Internet Explorer or Business Application)- The ScanEmul program must be running if you want to scan barcodes.57
To use the Scanner (2)zThis program is located under Flash Disk -> Scanner folderThe Scanned Data will be displayed hereY h i f i lik Fi iYou need to select this tab to configure Settingsof DeviceYou can get the information like Firmware version,DLL version and Decoder version.It is to trigger the scan beam. Usage oggYou can also Use ‘S’ button on the right sideof Device to trigger it.58
To use the Scanner (3) Scan TestzHow to use scanner–Usage of 1D Scanner (MC-7100S, MC-7500S)of DeviceUsage of 2D Scanner (MC7700S)Correct way Incorrect wayUsage o–Usage of 2D Scanner (MC-7700S)Scanner is optional. You can not use scan feature with no scanner enabled device. Correct way Incorrect way59Scanner is optional. You can not use scan feature with no scanner enabled device. 2D Barcode Scanner is optional. Only with 2D Barcode scanner enabled device, you can do 2D barcode scan. (MC-7700S)
FCC Warning61
FCC Warning62

Navigation menu