M3 Mobile MM3 Portable Data Collection Terminal User Manual 1

M3 Mobile Co., Ltd Portable Data Collection Terminal Users Manual 1

Users Manual 1

MM3 MANUALPlease read “the safety guide” beforeuse and it in a proper manner.use and it in a proper manner.All the information of user manual and programs in CD can be downloaded at the m3mobile homepage.
NotezThis manual is subject to copyright protection along with all relevant rights.zNo part of this document can be copied, reproduced, changed or translated in whole or in part by any means without prior written consent of M3 Mobile Co., Ltd. zThe content of the manual is provided “as-is” and be subject to change at any time without notice. zM3 Mobile Co., Ltd. makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. zMicrosoft, ActiveSync, Windows, Windows logos, Windows Mobile 6.1 logos are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. Microsoft OEM products are licensed by Microsoft Licensing Inc., a entirely owned subsidiary of Microsoft Corporation. Allth dt ithid t dt tdk itdtdkzAll other product names in this document or product are company names, trademarks or registered trademarks of the respective owners. 2
Copyright and AgreementzThis user manual is provided “as-is”. It may contain editing error or omitting due to the difficulty of expressing technical feature. zIf an application program provided by other supplier using by MM3, refer to the supplier for a program manual.zThe application program providers have the responsibility of indicating their contact number for customerzThe application program providers have the responsibility of indicating their contact number for customer service on MM3 terminal, item box, or program.zM3 Mobile Corporation do not warranty any programs produced and added by the third software companies after MM3 products are distributed from factories. zM3 Mobile Corporation has the right to ask warranty of any programs to the program providers to meet thezM3 Mobile Corporation has the right to ask warranty of any programs to the program providers to meet the needs of mobile networking companies. zThe contents in the user’s manual are protected under the Software Copyright Act. Copy, reproduction, distribution of the contents in the user’s manual without any written agreement notice of M3 Mobile Co. Ltd., is considered as criminal actions.zWindows, MS Office, Outlook, ActiveSync, Internet Explorer programs are the registered brand of Microsoft.zMM3 is the registered brand of M3 Mobile Co. Ltd. zThe brands of other products and service referred in this manual belong to corresponding providers. 3
Caution when using MM3 (1)zUser Caution –When the unit is lost or stolen, notify to network provider immediately.–Do not rent the unit to third person without authorized permission. –Do not use the unit while drivingDo not use the unit while driving. –For technical help, contact designated service centers. –Contact responding suppliers directly for questions on applications and work programs other than hardware and basic installed applications. –Use supplied adapter and accessories by M3 Mobile Co LtdUse supplied adapter and accessories by M3 Mobile Co. Ltd.–Any defect on a unit while using other batteries, chargers and accessories can not get warranty. zCarrying and Storage Caution A id t th d i d hi h t t d h idit It f t lit t th d i–Avoid to use the device under high temperature and humidity. It may cause fatality to the device.–Avoid intentional dropping from high elevation. It may cause fatality to the device. –Charge batteries fully before the first time use of the device. 4
Caution when using MM3 (2)zDo not reconstruct –Do not reconstruct MM3 for any purpose. –It may cause fire in the unit, and wound or electric shock to users. –Any defect caused by reconstructing units can not get warrantyAny defect caused by reconstructing units, can not get warranty.zIllegal copy of mobile phone is prohibited–The person who reproduces mobile phone and uses this mobile phone is considered as criminals.Th f l t t l bil h i id d i i l t–The use of lost or stolen mobile phone is considered as a criminal act. –Keeping the lost or stolen mobile phone after turning power off, is considered as a criminal act.5
Size and FeaturesUsed frequency bands Tri-Band : UMTS / HSDPA 850 / 1900 / 2100 MHzQuad-Band : GSM GPRS 850 / 900 / 1800 1900 MHzBand width 200 KHz (GSM) / 5MHz (3G)External appearance 88 x 215 x 61mm (Width x length x height)Weight570g (battery included)Weight570g (battery included)OperationalTemperatureMain body -20 ℃~ +50 ℃Adapter -20 ℃~ +50 ℃Relative Humidity 5% ~ 80%AC Power Input : AC 100 ~ 250V, 50 ~ 60HzOutput : DC 5.2V, 5A6Supported Frequency Bands can differ depending on the supplied antenna.
ContentszNote 2zCopyright and Agreement 3CtihiMM34LED/Battery attaching/detaching 16Charging 17How to connect to PC 18TENTSzCaution when usingMM34zSize and Features 61.MM3Introduction92. Basic Usage 19Main screen 20CONT1.MM3Introduction9Product Composition 10Name and function of each part 12IB13Input screen 213. ActiveSync 26ActiveSync Introduction 27InputButtons13Soft/Hard Reset 14How to use stylus pen 15Installing ActiveSync 28Synchronization of data 297
Contents4. How to use internet 30Via HSDPA 31Via Wireless WLAN 336. Usage of Device 47Camera 48Bluetooth 52TENTSBrowsing the Web Site 365. How to use the Phone 41InitScreen42GPS 56Scanner 57CONTInitScreen42Phone Control 43Phone call and receive 44Phbk45Phonebook45SMS send and receive 468
1. Introduction1. IntroductionPdtC itiProduct CompositionName and Function of each part(MC-8000S)Input ButtonsSoft/Hard ResetSoft/Hard ResetHow to use Stylus penLED Battery Attaching/DetachingChargingChargingHow to connect to PC9
Product Composition (1)At the first time of opening the product box please check if it contains all the basiczAt the first time of opening the product box, please check if it contains all the basic components, listed as following.ductionMM3 main terminalIntrodMM3 main terminal + 2 units of standard battery Cradle USB CableCDPtblAdtMANUALCDPortable Adapter10 The product components may differ depending on the supplied products.MANUAL
Product Composition (2)zHow to use the manual–This manual provides detailed information to make using the device easier and faster.–The content related to phone or communication in this manual is only applicable when the device is equipped with HSDPA module for Voice and Data communication.qpp–The features described in this manual can not be used when it is not equipped in the device (WWAN, WLAN, Bluetooth, Scanner, Camera, GPS). –The content of this manual is subject to change without prior notice due to product improvement or modification of its functions, etc.duction,Introd11
Barcode Scanner WindowScannerNames of each part (MC-8000S)ScannerBBatteryLCD touch ScreenPistol gripductionButtonHSDPAFlashCameraStylus PenCharge LEDScanner LEDIntrodBattery LockKeyPad Reset Switch Mini SD Extension Slot12 IO PortSIM Card Slot
Input ButtonComponent DescriptionPower button Press to toggle the device on/off.Long press to menu (Backlight, Display, etc) Function Phone/Call function press to accept the call or to execute the phonePower buttonAlphanumericbuttonSend button End buttonNavigation buttonEnd function press to hang-up/reject the call.Input keys Press to input alphabet characters or numbersLeft, right function button press to lunch an assigned application or functionAlphanumericpress toswitch between alphabet and number inputductionAlphanumericpress to switch between alphabet and number inputStart button Press to display the Start menu.Backspace button press to move backFunction button press to Function Key with (*, 0, #)Di iblf ih d dIntrodDirectionbutton press to move left,right and up,downReturn button press to confirm the actionScanner button Press to launch the barcode data scan applicationCamera button Press to launch the Pictures & VideosBackspace buttonVolume button Press the top key to increase volume, press the bottom key to decrease volume.13 Some key functions might not be supported, depending on the option.
Soft/Hard Reset①②③SftR tductionzSoft Reset- A soft reset allows your device to get a fresh start,similar to rebooting a computer. - This restarts your device and adjusts memory allocation. - All records and entries are retained after a soft reset.IntrodzHard Reset- A hard reset removes power to your device. - This erases all records and entries, deletes all additionalprograms you have installed, and restores the device’s defaultfactory settings- Unsaved data in open programs may in some cases belost.factory settings. - Never perform a hard reset unless a soft reset does not correctyour problem. 14 Please mind that you need to set up the standard timezone date, and time. After power off.
How to use Stylus PenzLong PressLeave Stylus pen touching the screen for long and you can select themenufor long and you can select themenuon the pop-up screen. You can also select functions availablein the designated item using the pop-up menu.zDragIt is used when you select the text. Please drag the desired part with stylus pen attached on the screen.zTapTap the touch screen one time using a Stylus pen to select and execute items and files.ductionThe function of the pop-up menu canbe different according to the program.Introd15
LED / Battery attaching/detachingzLED Alarm–Informs Charging, Scanner Status. Type LED Status DetailsRdCh izBattery attaching/detaching–Attaching BatteryAs picture shown, put the battery pack to back of PDA, and lock the battery pack with locking device.Dt hi BttductionLED for chargingRedGreenChargingCharging completeWWAN Status Blue BlinkingBlue OnWWAN Standby (within range of phone/internet)WWAN in use –Detaching BatteryPress locking device to the right, then using upper notch, detach the battery from main body.IntrodLED Blue OFF (phone/SMS/internet in use)WWAN is off or out of rangeScanner LED Green When the barcode data is successfully read16
ChargingzConnect plugin from charger to charge jack of mainzCharging in CradlezConnect plug-in from charger to charge jack of main body, or charge jack of cradle, and then place main body onto cradle.zCharging LEDzCharging in CradleSeparate BatteryductionType LED Status DetailsDirect charging to main body RedGreen ChargingCharging CompleteCradle Charging Red Charging Separate BatteryIntrodzWhen charging, the status of the battery attached to main body can be confirmed by the LED left of upper corner of main body Also the status of Sub-battery(Extra battery charging) Green Charging CompletepyCharging LEDcorner of main body. Also the status of Subbattery can be confirmed by the LED right of low corner of Cradle.Do not use any other charger except one (5.2 V / 5A) provided . Make sure to handle it gentle; damage with excessive force may cause no warranty.17Risk of explosion if battery is replaced by an incorrect type.Dispose of used batteries according to the instructions.When attached battery is completely discharged, plug charger to main body, then reset thedevice to check if screen is back on. To use, do at least 10 minute charging.
How to connect to PCzA cradle of MM3 supports charging and USB connection.zConnecting step of cradle of MM3 is as following.–Connect charger to MM3 cradle. (DC JACK)–Connect charger to power source. (to wall) –Connect USB cable of MM3 cradle to USB port of desktop PC. –Place MM3 onto docking cradle then execute Synchronization with Desktop PC.zThe location of USB port can be at the back, front or side of PC and the shape of USB port is identical on Desktop PC andductionand the shape of USB port is identical on Desktop PC and Notebook.zUSB host function is available by putting USB cable into USB port of Cradle. HostAC Power ClientIntrodSeriesConnecting to Cradle(Option) Ethernet (Option)18
2. Basic Usage2. Basic UsageMain screenInput Screen19
Main Screen zMain screen–Main Screen is set belowStart menu Button functionStart menu Select the program you want to use.UsageDay/Time infoWireless infoInfo bar Info bar View the power, modem, sound, input mode and connecting view.Day/Time info View the current date and time.Wireless info View the Wireless power and state.Basic User info Messages infoTask infopUser info View the personal information.Messages info View the Messages received.Task info View the task information.Lock infoToday info View the Today’s information.Lock info View the screen / Lock information.Pocket MSN info View the Pocket MSN information.Left/Right Function infoView the Left / Right informationLeft/Right Function info20Left/Right Function infoView the Left / Right information.
Input Screen (1)zTo use Input- Process this program " Start > Office Mobile > Word Mobile".zTo use the Keyboard InputypUsageBasic Tap the arrow next to the keyboard icon and then select hkb d hThis is the Keyboard Input Screen. You can input the letter, numberand characters when you click21the keyboard on the menu screen as a picture above. the each icon on the keyboardInput screen.
Input Screen (2)zUsage of Block Recognizer input.UsageBasic Tap the arrow next to the keyboard icon and then select theBlock Recognizer on the menuit bIt is the screen of block recognizer input. In this input screen you can input letters in 'abc' and numbers in '123 ‘each in the input box seen on thescreenIn the input screen of block recognizer you can input specialletters and characters by tappingth i t b22screen as a picture abovescreen.the input box once.
Input Screen (3) zUsage of Letter RecognizerUsageBasic Select the arrow next to the keyboard icon and then Select the'Letter Recognizer' on the menu th i t bThis is the 'Letter Recognizer' screen. In the ‘Letter Recognizer' input screen, you can input the capitalletters in 'ABC', the small lettersi ' b ' d b i '123' hPlease choose ‘Options…’ on the input menu. Select ‘Letter Recognizer’ as input method andthen click ‘Options…’. Here you can configure theitd23screen as the picture above.in 'abc' and numbers in '123' each in the input box seen on the screen.input modes.
Input Screen (4) zUsing transcriber input–Transcriber is a writing recognizer program. It provides you various writing input and input menu.UsageBasic Select the arrow next to the keyboard icon and then select theTranscriber on the menu like thepicture.This is the Transcriber input screen. If you input letters, numbers and characters on the screen with the stylus pen, it would be written automatically on the place where 24the cursor is blinking. You do not have to concern about the inputbox when using transcriber.
Input Screen (5)zInput by using Keypad–You can input numbers and letters by using Keypad. UsageYellowKey :Basic Blue Key : As you push the blue key button, you can see YellowKey : As you push the yellow key button, you can seethe yellow text through a display of the main terminal.The blue text through a display of the main terminal.25
3ActiveSync3. ActiveSyncActiveSync IntroductionInstalling ActiveSyncSynchronization of Data
ActiveSync IntroductionzSync is an abbreviation of “Synchronization” and refers to the process of making data in PDA and desktop computer to be same by linking both data.–Sync is an abbreviation of ‘Synchronization” and refers to the process of making data in PDA and desktop computer to be same by linking both data. When either PDA or PC modifies data, it updates others to the pyg ,pmost recent data. –Not all the data is synchronized at same time. It follows the option settings of ActiveSync, provided by Microsoft.zBy linking MM3 and computer, you can make data in both devices in the same status eSyncyg p,y(synchronization) or install, copy, move, delete programs for business purpose and others. zIt is compulsory to install this program in order to install business programs, synchronize data, back up and synchronize contact numbers in an address book, etc.ActiveDo not connect USB of Cradle to desktop PC before installing Active Sync to desktop PC..It may cause a desktop PC cannot recognize PDA since Active Sync contains PDA program driver. 27
zTo install ActiveSyncActiveSync install / connect- Select the ActiveSync program in the CD provided, and then install it to the computer.–Once the installation is complete, connecting window will start. Connect the cradle with PC using USB cable, and then dock the device on the cradle. –When the device is recognized on the PC, Connection will be established after assigning the port for it automatically. zThe definition of PartnershipeSyncp–It is the process of paring PC with PDA in order to exchange the data each other. Via this process, the data on the PC and on the PDA can be synchronized.※The synchronization is available with Outlook 2003 or above version. It isActiveUSB connection to PCThe synchronization is available with Outlook 2003 or above version. It is not supported on the outlook express which is provided together with Windows OS. Please re-try the synchronization if connection is disturbed by strong noise or static. 28–To install ActiveSync on the host computer, download version 4.1 or higher from the Microsoft web site at http://www.microsoft.com. Refer to the installation included with the ActiveSync software.–Microsoft recommends installing ActiveSync on the host computer before connecting the mobile computer.
Synchronization of DatazIf you see the Microsoft ActiveSync window in the desktop PC, you can find an option icon. If you click this option icon, taps such as “Sync Options”, “Sync Mode”, “Rules” will appear. z“Sync Options” is a menu that you can select an item to synchronize.Contact Calendar Email Tasks Memo Favorite Files Media etceSync–Contact, Calendar, E-mail, Tasks, Memo, Favorite, Files, Media, etc. z“Sync Mode” enables you to choose synchronization methods. According to the selected synchronization mode, there are 3 following methods: –Continuously while the device is connected: In this mode, if you want to carry out synchronization, connect the device to thedesktop computer ActiveSync will immediately start synchronization and synchronize according to the user’s input of changesinActivedesktop computer. ActiveSync will immediately start synchronization and synchronize according to the user s input of changes in a computer or the device.–Only upon connection: If you want to carry out the synchronization after the first synchronization on a manual basis, click Sync.–Manually: In this mode, ActiveSync will not run automatically. In order to carry out synchronization, click Sync.zSynchronization is the process of updating M3 and desktop PC after comparing their data Any files includingzSynchronization is the process of updating M3 and desktop PC after comparing their data. Any files including personal organizer management data, etc in M3 can synchronize with those in the desktop PC.When Troubleshooting the ActiveSync, Check the solutions below.zEnsure the correct USB cable is used in the cradle with USB port of the PC29zEnsure the correct USB cable is used in the cradle with USB port of the PC.zEnsure the power input cable of MM3 or LCD.zPlease re-try the Synchronization after Soft-reset or Hard-reset. Finish the running program and save the data for sure before resetting.
4 How to use Internet4. How to use InternetVia Wireless HSDPAVia Wireless WLANBrowsing the Web Site

Navigation menu