M3 Mobile MM3 Portable Data Collection Terminal User Manual Pt 2

Download:
Mirror Download [FCC.gov]
Document ID	1177549
Application ID	64Ji9hHylGrJCplXW3HJdA==
Document Description	User Manual Pt 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	231.27kB (2890919 bits)
Date Submitted	2009-09-29 00:00:00
Date Available	2009-09-29 00:00:00
Creation Date	2009-09-17 17:17:44
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2009-09-17 17:17:50
Document Title	Microsoft PowerPoint - MM3_TotalManual_ENG_EDIT.ppt [호환 모드]
Document Creator	PScript5.dll Version 5.2
Document Author:	C3D6B1E2B9AE

Via HSDPA (1)
To connect to the Internet via Wireless WAN (1)
How to usse Interne
et
Tab ‘Start > Settings > Connections’
31
Select ‘Add a new modem connection’
of ‘My ISP’ in the ‘Connections’.
WWAN service is optional.
It is not available in the device which does not have WWAN module installed.
Put the name you want into the
‘Enter a name for the connection’.
Then select the ‘cellular
cellular Line(GPRS)’
Line(GPRS)
in the ‘Select a modem’.
Via HSDPA (2)
To connect to the Internet via Wireless WAN (2)
How to usse Interne
et
Input the Access point name
suitable to the SIM Card / Operator
company of Network then Tab the
‘Next’.
32
Tap the ‘Finish’ after input the
User name and password
according to the setting.
((In some cases,, it is required
to
set IP address at the advanced
menu.)
Select the ‘Manage existing connections’
on the Connections. Choose the ISP which
you want to connect to as picture above.
* The
Th saved
d settings
tti
automatically
ti ll applied
li d
at connecting.
You can explore the Internet using
WWAN connection.
Via Wireless WLAN (1)
To connect directly on the Main Screen
How to usse Interne
et
You can use the Wireless Network Via Wireless LAN.
MM3 supports IEEE 802.11a, IEEE 802.11b and 802.11g.
To connect the Wireless LAN (AP must be on and functioning)
On the Today Main screen, you select
Wireless state bar or go to ‘Start >
tti
>C
ti
>’ Wi
Settings
Connections>’
Wireless
Manager.
33
Tap the WI-Fi on the ‘Wireless
Manager'
g to turn WLAN on.
Wireless LAN is optional. You can only use WLAN, when the WLAN
module is built in to the device.
When the dialogue box is appeared, Select the AP you want and
then,, you
y can connect the Network with it.
Via Wireless WLAN (2)
To connect via Wi-Fi menu
How to usse Interne
et
On the settings screen, you select
Wi Fi Icon.
Wi-Fi
Icon
You can also tap Start > Settings >
Connections>Wi-Fi.
34
Configure the connect type then
click the 'Next'
Next .
After configure Network authentification,
tap the 'Finish'
Finish . You can see the wireless
Networks available.
Via Wireless WLAN (3)
Continue from the last page
How to usse Interne
et
–
35
Configure DHCP / Static IP
Browsing the Web Site (1)
Microsoft Internet Explorer
- Via Wireless WAN , Wireless LAN and Active sync connection, you can browse the web.
- You can download programs and files by accessing the Internet.
How to usse Interne
et
To use the Internet Explorer
Tap 'Start > Internet Explorer
36
Address Window
Searching
This is the Internet Explorer
processing screen.
Input
t th
the address
dd
you wantt on th
the address
dd
window
i d
in
i upper off the
th screen, then
th
click the 'search'. It will try to connect to that web address via Wireless network
that is connected.
Browsing the Web Site (2)
Continue from the last page.
How to usse Interne
et
On the 'Menu > Favorites...' you can see the list of sites that you
have saved and browse to it directly. The favorite page is like the
picture above.
37
On the Menu > History... You can see the list of sites that you have
recently visited. The history page is like the picture above.
See the 'Start > Help' if you want to know more about how to use the Internet Explorer
Browsing the Web Site (3)
To set up an e-mail account
How to usse Interne
et
Process the 'Start > Messaging'. Select the
'Menu > Tools > New Account...in the outlook
E-mail box.
38
Set an E-mail provider for 'other‘
then tap 'Next.'
Input the E-mail address on the
Enter e-mail address , then tap ‘
Next '.
When the Status is for completed,
tap
p the 'Next'.
Browsing the Web Site (4)
Continue from last page
How to usse Interne
et
Set an E-mail provider for 'other‘
then tap 'Next'.
39
Select the Account Type and put
the Name then tap 'Next'.
Input the 'Incoming mail, Outgoing
mail, Domain' then select 'Finish'.
* For detailed setting menu, please
click ‘Options’.
Options .
After finishing the setting you can send and
receive E-mail using the e-mail account.
Browsing the Web Site (5)
To send and receive an E-mail
How to usse Interne
et
< To receive an e-mail>
Select the 'Message' on the 'Today'
Select the 'Send / Receive' in the 'Menu' and check the received mail.
40

After process the 'Message' program , select the 'New' .
You can send an e-mail when you select the 'Send' after writing a new
e-mail.
5
5. How to use the Phone
Init Screen
Phone Control
Phone call and receive
Phone book
SMS send and receive
Phone functions
Phone setting
41
Init Screen
Ho
ow to use
e the Pho
one
Phone Main Screen
Network Type
GSM Operator
HSDPA / Network Status
Volume
Call Status
Contacts
Call Status
Input Number
Input Number
Key Pad
GSM Operator
Phone Menu
It shows Call Status.
It shows Inputted Numbers.
Key Pad
It is used to dial the number and can be used
as speed-dial.
Contact
It shows Phone Book Dialog.
Network Type
It displays the availability of GPRS and EDGE /
HSDPA connection.
GSM/Network
Status
It indicates the signal strength.
Volume
It is Volume on/off and vibrate
Phone Menu
42
It indicates the current Network Provider.
Talk End
Talk,
End, Speed Dial
Dial, Call History
History, etc menu…
menu
Phone Control
Phone Program On/Off
Ho
ow to use
e the Pho
one
Phone Call Send/End
SEND
END
Select the SEND and END button like
the picture above to start and finish
the Phone program.
You can turn on and off phone
in Wireless Manager
43
Tap the Phone button on the left bottom of
the Today Screen and then you can process the
Ph
Phone
program. Also
Al you can fi
finish
i h th
the program
using the X button.
Phone Call and Receive
Phone Call
Ho
ow to use
e the Pho
one
To make a call:
1.Input number via program keypad
or device keypad.
2 Make a call by pressing the ‘Talk’
2.Make
Talk
button on the program, or pressing
‘SEND’ button on the device.
44
To hang up:
Press the ‘END’ button on the program or
on the device.
Phonebook
To use Phonebook
Searching Contacts
Ho
ow to use
e the Pho
one
New Contact
Searching
A name or
Number.
New SIM Contact
Contacts
Menu
Contacts Menu
45
Contacts Option
Input the new contact
Input the contact to the SIM Card.
Send Contact
Transmit the information of Contact by BEAM
or SMS.
Copy/Delete
Copy or delete the Contact
Options
Set the Options for Contact.
Vi
View
By
See the Contact by Type ( Name , Company,
Number … )
Filter
Contacts
Option
You can search the contacts by writing the
name and number or tapping.
Filter the information you want.
Call W/H/M
Call by the number on the Contact.
Send E-mail
Send an E-mail by the address on the Contact.
Send SMS
Add to Speed Dial
Send SMS by the number on the Contact.
Add the number on the Contact to Speed Dial.
Send Contact
Send the information of Contact by BEAM or
SMS.
Copy/Delete
/D l t
Copy
and
d Delete
D l t the
th Contact.
C t t
SMS send and receive
How to send SMS
Ho
ow to use
e the Pho
one
Select ‘message information’ menu
on the main screen to send SMS.
You can also send SMS by selecting
‘SMS send’ menu on Contacts or any
other applications.
applications
46
Change to the ‘Text Messages’ on
the Message Program like the
picture above and tap the ‘New’ on
the bottom.
Input the phone number and
message. Tap the send to send
SMS.
You can see the pop-up screen
when SMS is sent successfully.
6
6. Usage of Device
Camera
Bluetooth
GPS
Scanner
To use the Camera (1)
Notice before taking pictures
- The camera equipped with the MM3 is supported 2 mega pixels.
Usage o
of Device
Function
Mode
Still
Normal, Burst, Timer
Brightness
Resolution
White Balance
Flash
AF
N/A
-3, -2, -1, 0, +1, +2, +3
QCIF, QVGA, CIF,
VGA ,SVGA, SXGA, UXGA
QCIF, QVGA
Comment
Setting for taking photo
Setting for Brightness
Setting for size
Automatic, Sunny, Cloudy, Fluorescent, Incandescent
Setting for White
balance
Flash ON, Flash OFF
Setting for Flash
ON/OFF
Trig AF
Setting for Auto Focus
Camera Program Processing Screen
48
Video
Camera is optional. On the device with no built-in camera, Camera function can not be used.
QCIF(176x144), QVGA(320x240), CIF(352x288), VGA(640x480), SVGA(800x600)
SXGA(1280x960), UXGA(1600x1200)
To use the camera (2)
To process the camera program
Usage o
of Device
- You can process the camera program when you tap the camera button or tap the camera icon on the
'picture or video'.
Select the 'Start > Programs > Pictures & Video.
49
You can process the camera program when you select the camera
icon on the Picture & Video or select the camera icon in the menu.
Tap the ‘Menu > Options … > Camera Tab’ and then you can set the route of the storage memory ,
name and quality. You can set the Video on the Video Tab.
To use the camera (3)
Taking a Still photo
Usage o
of Device
Execute the camera program first. Move around to focus the desired
item.
Finally press the camera button to take a picture.
After executing the camera program , Preview mode will be changed
to standby mode after certain amount of time.
In order to start Preview Mode again
again, just tap the screen or press the
camera button.
50
After taking a picture, the captured image will be displayed on the screen.
If you want to execute the camera program, tap the camera button at the
bottom or click the camera icon on the left of window.
You can see the list of pictures taken previously by tapping ‘Thumbnails’ in
the Camera shooting mode.
To use the camera (4)
Taking videos
Usage o
of Device
If you want to take a video, select ‘Menu >
Videos' after executing the camera program.
51
While taking a video, you can
either stop (by tapping stop
button) or pause. (by tapping
pause button)
If you want to watch the video taken, Select the 'Thumbnails' first
to see the list of video files available.
When you select the video you want, you can play the video
recorded.
Bluetooth Communication (1)
Bluetooth On / Off
Usage o
of Device
On the 'Today Main Screen' , select the Wireless State
bar or Tap 'Start > Settings > Connections and select
‘Wireless Manager’.
52
To turn on/off Bluetooth, tap the
The status of Bluetooth can be seen
Bluetooth on the Wireless Manage
on the wireless status bar on the
main screen.
Bluetooth is optional. Device without built-in Bluetooth can not use Bluetooth service.
Bluetooth support the transmission and reception of files between the serial connecting service and
Windows Mobile device.
Bluetooth Communication (2)
Setting the Bluetooth
On the Bluetooth setting screen, you can set the Mode, connecting to BT device and COM settings
Usage o
of Device
You can set the Bluetooth mode
and establish connection when
you tap the 'Bluetooth' icon on
the Start > Settings > Connections.
53
In the device tab, you can search
and connect to other Bluetooth
devices.
In the COM Ports tab, you can
set incoming Port and outgoing
Port.
Bluetooth Communication (3)
To connect the Bluetooth
Usage o
of Device
- you can establish the connection by searching, matching pin code and selecting the service.
You can search the Bluetooth device
available when you select the 'Add
new device...' on the Device Tab.
Select a device to connect with and
tap 'Next' . Also you can select
the 'Refresh' button if there is no
device available.
54
Enter a Passcode to establish a
secure connection.
The passcode can be fixed one
or the one which is negotiated
between two parties in before
hand.
It shows the service available
on the Bluetooth device.
It shows the registered devices.
To add more device, please tab
‘Add new device’.
Bluetooth Communication (4)
Transferring files via Bluetooth connection.
Usage o
of Device
- It is possible to transfer files between Windows Mobile devices via Bluetooth.
In order to transfer files via Bluetooth
connection please go to 'Start
connection,
Start > Settings >
Connections > Beam‘ and then Check
the 'Receive all incoming Beams ‘.
55
Select the file you want to transfer
in the File Explorer.
Explorer Press the file
name long and tab ‘Beam File’.
By tapping ‘Beam File’, the list of available Bluetooth devices
shown Please choose the device to transfer the file to
shown.
to.
To use the GPS
To set the GPS
–
Usage o
of Device
–
Tap the ‘Start > Settings > System Tab > GPS’ and then you can set the information related to the GPS.
You don’t have to set additional information when there is a single program which uses GPS data. When
there are more than one program which use GPS data, you need to set the program port and hardware
port required for each program.
Select the GPS on the System Tab.
56
Set the GPS Program
Port which
is not yet used.
Set the Hardware port of the device.
GPS hardware port for MM3 is
COM2 and with baud rate of 9600.
GPS is optional. GPS feature is not available on the unit with no GPS module integrated.
To use the Scanner (1)
Usage o
of Device
1.
M3 ScanTest
It is a sample test program. It is only for testing the scanning feature of the device.
It can not be used for business application.
2.
ScanEmul
It is a program which can be used to output the scanned data on the application.
(like MS Word
Word-Pad
Pad, Internet Explorer or Business Application)
57
To scan the barcode, there are two scanner programs installed on the device
The ScanEmul program must be running if you want to scan barcodes.
To use the Scanner (2)
Usage o
of Device
58
This program is located under Flash Disk -> Scanner folder
You need to select this tab to configure Settings
The Scanned Data will be displayed here
You can get the
h iinformation
lik
like Fi
Firmware version,
DLL version and Decoder version.
It is to trigger
gg the scan beam.
You can also Use ‘S’ button on the right side
of Device to trigger it.
To use the Scanner (3) Scan Test
How to use scanner
Usage o
of Device
–
Usage of 1D Scanner (MC-7100S, MC-7500S)
Correct way
–
Incorrect way
Usage of 2D Scanner (MC
(MC-7700S)
7700S)
Correct way
Incorrect way
Scanner is optional. You can not use scan feature with no scanner enabled device.
2D Barcode Scanner is optional. Only with 2D Barcode scanner enabled device, you can do 2D barcode scan. (MC-7700S)
59
FCC Warning
61
FCC Warning
62

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 32
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:cb09ea9b-2be1-492f-9145-f69cdcd923a4
Modify Date                     : 2009:09:17 17:17:50+09:00
Create Date                     : 2009:09:17 17:17:44+09:00
Metadata Date                   : 2009:09:17 17:17:50+09:00
Document ID                     : uuid:77d2a198-7052-4fff-9bf4-af62099978f6
Format                          : application/pdf
Title                           : Microsoft PowerPoint - MM3_TotalManual_ENG_EDIT.ppt [호환 모드]
Creator                         : PScript5.dll Version 5.2
Author                          : 
Producer                        : Acrobat Distiller 7.0.5 (Windows)

EXIF Metadata provided by EXIF.tools