User Manual
Basic operation System connections Everything is ready, insert the power supply. Tx (transmitter) to enter standby mode after power. When you press Select . source unit starts to work. Press , time 3 seconds after Tx (transmitter) is forced into standby mode. Hi-Fi STEREO Multi media Roaming Dock Receiver Into "standby" mode, the unit can remember the last operational use of the state ( . source and volume status). Memory a k e r→3 .5 Transmitter Spe CHANNEL ID 1234 SB Gear need dial to the same pair n e s→U Line Tu CH. ID Boot (source key) to select sequence: d/iPhone → iPo n→ (Circle key) 1234 LED function indication: Maximum transmission distance of 82 feet (25 meters) Green: iPod/iPhone Purple: iTunes Blue: USB Speaker Orange: 3.5Ø Line in Red: Standby mode Roaming ■ While the volume increases or decreases according to election when, LED light sources in different input mode, flashing lights color the model. ■ Select the volume increased by Max or min, LED lights will remain constant light, stop flashing. Note: connection has not been completed, do not insert the power supply. This products can be purchased items, with the -Tower 2.0 active speakers and XRD-1000 multimedia speaker series products. Detailed combinations official website: http://www.comvoxaudio.com -5- -6- OWNER’S MANUAL XRD-WIN Introduction Federal Communication Commission Interference Statement We thank you for purchasing wireless audio transmitter, we hope that this products can provide you full satisfaction of multimedia wireless audio experience. First, we recommend that you carefully read the user manual to avoid any error or unpleasant experiences, to perform operations XRD-WIN. Important safety instructions 1. Read these Instructions. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 2. Keep these Instructions. 3. Heed all Warnings. 4. Follow all instructions. 5. o not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings. Install in accordance with the Manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding – type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. WARNING:To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not place objects filled with water, such as a vase, on apparatus. 16. The AC mains plug is used as the power disconnect device and it should remain readily accessible and operable during intended use, In order to completely disconnect the apparatus from, the mains plug should be completely removed from the AC outlet socket. - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 12. Use only with a cart, stand, tripod, bracket, or table specified by the CART WARNING manufacturer, or sold PORTABLE (symbol provided by RETAC) with the apparatus. When a cart is used, use caution when moving the cart / a p p a r a t u s combination to avoid injury from tip-over. Receiver (Front View) (Rear View) CH. ID RF Link 5V DC 1A 1234 Band selector switch Signal link indicator DC 5VPower supply input Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Transmitter Power switch /Sources of input Selection key Volume down Package Contents (Front View) First, let us check your XRD-WIN of the box, the packaging you will find the following items: Roaming (USB cable X1) Sources of input Indicator (Receiver X1) (Transmitter X 1) (Rear View) (3.5Φ audio cable X1) AUX CHANNEL ID (Transmitter - Power Supply X1) USB DC 12VPower supply Input Input Band selection External audio Switch sources Input Keyhole (iPod/iPhone DockX4) 12V DC 1A 1234 (Receiver - Power Supply X1) (Manual X1) No.:15.16.18.19 -2- Volume up (Top View) 17. CAUTION: To reduce the risk of fire or explosion, do not expose batteries to excessive heat such as sunshine, fire or other heat sources. 11. Only use attachments / accessories specified by the manufacturer. Controls and indicators -3- -4- Line out Audio signal output
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 2 Create Date : D:20120824075924 Modify Date : D:20120824075924 Producer : Corel PDF Engine Version 3.0.0.739 Author : A85110 Creator : CorelDRAW Title : Roaming_XRD-WIM_英文說明書FCC版EXIF Metadata provided by EXIF.tools