MET METYH1368 BLUETOOTH PORTABLE CD BOOMBOX WITH AM/FM RADIO User Manual

MET INDUSTRIAL LTD BLUETOOTH PORTABLE CD BOOMBOX WITH AM/FM RADIO

User Manual

MODEL NO. SRCD1368BTOWNER'S MANUALBLUETOOTH PORTABLE CD BOOMBOX WITH AM/FM RADIOPLEASE READ BEFORE USING THIS UNIT
1This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. CLASS1LASER PRODUCTThis mark indicates this unit belongs to class 1 laser product.The laser beam may produce radiation harm to the directlytouching human body.IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS2Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.12.Read these instructions – All the safety and operating instructions should be read before this product is operated. Keep these instructions – The safety and operating instructions should be retained for future reference. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. Follow all instructions – All operating and use instructions should be followed. Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like.Clean only with dry cloth.Do not block any ventilation openings. Install in accordance with the manufacture’s instructions.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.Only use attachments/accessories specified by the manufacturer.1.2.3.4.5.6.7.8.9.10.11.13. Unplug this apparatus during lightning storms or when unused for long periods of time.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.WARNING：To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus.Main plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus completely, the main plug should be disconnected from the main socket outlet completely.Battery shall not be exposed to excessive heat such as sunshine, fire or the like.14.15.16.17.18.
IMPORTANT SAFETY INSTRUCTIONS319.25.Do not install this equipment in a confined or building-in space such as a book case or similar unit, and remain a well ventilation conditions at open site. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc.WARNING：Please refer the information on exterior bottom enclosure for electrical and safety information before installing or operating the apparatus.No naked flame sources, such as lighted candles, should be placed on the apparatus.Attention should be drawn to environmental aspects of battery disposal.Use of the apparatus in moderate climates.26.27.28.29.30.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.31.
Control Location (Top Views) HANDLECD DOORAUX IN JACKVOLUME KNOBPOWER BUTTONTUNING KNOBAC SOCKETBATTERIESCOMPARTMENT4PROGRAM BUTTONREPEAT BUTTONPLAY/PAUSE BUTTONSTOP/BLUETOOTH PAIR BUTTONSKIP BACKWARD BUTTONBLUETOOTH INDICATOR STANDBY INDICATORTRACK DISPLAY (CD ONLY)FUNCTION SWITCH(CD/BLUETOOTH/FM/AM)PROGRAM INDICATORREPEAT INDICATORSKIP FORWARD BUTTONPOWERPLAY/PAUSERPTPAIR
Connecting AC PowerConnect the small end of AC cord to the socket at the back of the main unit and insert the plug of AC cord into standard AC wall outlet.Battery Operation Before installing batteries (not included), ensure that the unit is disconnected from the mains supply.Remove the battery compartment cover on the bottom of the unit by sliding the battery cover with the opening direction indicated on the battery cover.Install 6 pieces of 1.5V (UM2) batteries (not included) by following the polarity markings and then replace the cover.For battery operation, unplug the AC cord from the AC wall outlet first and then remove the AC cord from the socket at the back of the main unit.Caution:The unit is designed to operate from mains supply of AC 120V~60Hz. If the plug of AC cord does not fit properly, try to turn it over and try again. Do not force it.When the unit is intended for being unused for a long period of the time. Please press the STANDBY button to turn off the unit and unplug the power cord from the AC wall outlet. ACPower Connection56
Switching On for the first time Plug into AC power or install batteries by following instructions on the previous Power Cthe unit. The STANDBY indicator will be lighted off. To turn the unit off, slide the POWER switch again to turn the unit off. onnection section. The STANDBY indicator willl lit. Slide the POWER switch to turn on Switching between different sources (CD/BLUETOOTH/FM/AM)After turning on the unit, press and toggle FUNCTION switch to select different sound sources.Adjusting sound volume levelAfter turning on the unit, turn the VOLUME knob to adjust the level of sound volume.Main Operation Caution:There is a danger of explosion if batteries are replaced incorrectly.Replace batteries with the same type and same brand only.When the unit is intended for being unused for a long period of the time, press thePOWER button to turn OFF the unit and remove all batteries from the main unit.6
The unit is designed to play normal music CD disc bearing the correct identification logo. If the disc does not confirm tothe standard, it may not be played back properly.Loading disc1. Press and toggle the FUNCTION button to switch to CD mode.2. Press down the OPEN/CLOSE AREA on the CD door on the top of the unit to unlockand open the CD door.3. Hold the CD disc by its edge with CD graphical side facing up and put it onto the CDcompartment after the CD door is opened. Make sure that the disc label is facing up.4. Close the CD door and make sure the VOLUME knob is not in minimum position.CD playbackAfter loading the disc, the disc will begin spinning and the total number of the tracks on thedisc will be shown on the display and the first track/file on the CD will be played backautomatically.Play/Pause ControlTo pause playback temporarily by pressing the PLAY/PAUSE button. Music playback will be paused and the current elapsed track number will be shown on the display and the play icon will be blinking. Press the PLAY/PAUSE button again to resume playback.Stop playbackTo stop playback, press the STOP button on the unit. The total number of tracks of the disc will be displayed.Caution:Playback of CD-R / CD-RW may depend on recording conditions.Do not attach a seal or label to either side (the recordable side or the labeled side) of a CD-R/ RW disc. It may cause malfunction.Do not load a blank CD-R/ RW disc. It will take over 1 minute to read the disc. The disc may be damaged if you try to open the CD Door while reading the disc.CD-ROM, CD-I, CDV, VCD, DVD or computer CDs are not possible to be read.Remark:If there is no disc in the unit, “NO” will be indicated on the display.If the CD cannot be read,“NO” will be indicated on the display.CD OperationSkip trackDuring playback, press the forward or backward SKIP buttons to skip to the next or previous tracks.High-speed music searchDuring playback, press and hold the forward or backward SKIP buttons to skip/search through the current track at high speed in forward or backward directions. When the SKIPbuttons are released, normal playback speed will be resumed immediately.7
Repeat playback modes (Repeat 1 / Repeat all)Repeat the Current TrackRepeat All TracksDuring playback, press the REPEAT button twice to repeat the entire album.Return to normal playbackPress the REPEAT button until NO repeat indicator is displayed. The normal playbackwill be resumed.During playback, press the REPEAT button once to repeat the current CD track.Programmed CD playbackThis unit can be programmed to play up to 20 tracks in CD mode. Load the music CD disc onto the CD compartment (without pressing the “PLAY/PAUSE” button)1. Press PROGRAM button once in the stop mode. “P01” will be shown on the displayand blinking.2. Press the SKIP buttons to select the desired track to be programmed.3. Press PROGRAM button again to save the selected track/files.4. Repeat steps 2-3 to program up to 20 tracks.5. Press the PLAY/PAUSE button to play the programmed tracks after programming iscompleted. The “PROG” indicator will lit.6. To clear program and resume normal playback, press the STOP button twice duringplayback, or open the CD door, or change to next mode to clear the programmed tracks.Remark:The unit can store up to 20 tracks in the programmable memories. During the programmed playback, user can still select the “repeat 1 / repeat all” functions.CD Operation-Continued8
• Press the POWER button to turn on the unit.• Press and toggle the FUNCTION button to select Bluetooth mode. The unit willsearch the paired device with the “BLUETOOTH” Indicator lit.• Press and hold the STOP/PAIR Button for 4~5 seconds. Then the “BLUETOOTH”Indicator is flashing, the unit will goes into Pairing/Discoverable mode.• Turn on the Bluetooth function of your Bluetooth device and enable the search orscan function to find the unit.• Select "SRCD1368BT ecived eht morf"li ecived ruoy no sraeppa ti nehw tssc fI .neerrequired, enter the pass code “0000” to pair (link) the unit with your device.• After successfully pairing (linking) the Bluetooth enabled device the “BLUETOOTH”Indicator steadily and a short beep will heard.Note: If you can’t pair the unit with your Bluetooth enabled device, you can try to turn Off & On the power of your unit to solve the problem.The unit is designed to receive FM Stereo / FM and AM radio bands.1. Switch and toggle the FUNCTION button on the top of the unit to switch to AMor FM mode.2. Adjust the TUNING knob on the top of unit to tune the frequency of desired radiostation.3. To turn off the unit power, press the STANDBY button to switch off the unit.Remark:The unit has built-in AM ferrite bar antenna, which can provide adequate reception in most areas. If the AM reception is weak, try to adjust the location of the unit or relocatethe unit to improve the reception. If the FM reception is weak, try to adjust the length and the angle of the XQLW to improve the signal reception.1. If the unit has never been paired with a Bluetooth device before, you need to follow thepairing instructions below to link the SRCD1368BT with your Bluetooth device.Bluetooth OperationRadio Operation9
1. Plug into a 3.5mm audio cable (not included) into your external music player andconnect the other end (3.5mm jack) into the AUX IN jack on the top of the unit.2. Make sure your external music player is turned on and start music playback on themusic player3. Adjust VOLUME knob to control the sound level of music playback from the speakerson the unit.Power Output. . . . . . . . . . . . . . . . . . 1.5 watt RMS x 2 channelsAC Power . . . . . . . . . . . . AC120V~60HzBatterySize . . . . . . . . . . . . . . . .UM- or &-Size batteries x 6PCSRadio Frequency. . . . . . . . . . . . . . . FM: 87.5 – 108MHz , AM: 520- 1710 kHzSetting up (AUX IN) connectionAUX-IN jack will allow you to connect external music player or external sound source to the main unit. AUX IN OperationSpecifications10

Navigation menu