User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2523284 |
| Application ID | 4vpsQbq/gNFasiMCc0v7ng== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 480.96kB (6011938 bits) |
| Date Submitted | 2015-02-04 00:00:00 |
| Date Available | 2015-02-04 00:00:00 |
| Creation Date | 2014-04-03 17:19:43 |
| Producing Software | Acrobat Distiller 9.0.0 (Macintosh) |
| Document Lastmod | 2015-01-06 15:16:38 |
| Document Title | untitled |
| Document Creator | Adobe Illustrator CS5 |
MODEL NO. SRCD286BT BLUETOOTH PORTABLE CD RADIO BOOMBOX OWNER'S MANUAL PLEASE READ BEFORE USING THIS UNIT 1 2 3 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. RF Exposure Statement To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. Control Location (Top Views) HANDLE FM ROD ANTENNA TUNING KNOB CD DOOR PLAY/PAUSE BUTTON AUX IN JACK STAND BY BUTTON STOP/BLUETOOTH PAIR BUTTON PROGRAM BUTTON SKIP FORWARD BUTTON REPEAT BUTTON SKIP BACKWARD BUTTON VOLUME KNOB BLUETOOTH INDICATOR POWER PLAY/PAUSE REPEAT PROGRAM PLAY/PAUSE INDICATOR PROGRAM INDICATOR POWER INDICATOR REPEAT INDICATOR TRACK DISPLAY (CD ONLY) Control Location (RearView) AC SOCKET FUNCTION SWITCH (AM/FM/CD/BLUETOOTH) BATTERIES COMPARTMENT Power Connection Connecting AC Power Connect the small end of AC cord to the socket at the back of the main unit and insert the plug of AC cord into standard AC wall outlet. Caution: The unit is designed to operate from mains supply of AC 120V~60Hz. If the plug of AC cord does not fit properly, try to turn it over and try again. Do not force it. When the unit is intended for being unused for a long period of the time. Please press the STAND BY button to turn off the unit and unplug the power cord from the AC wall outlet. AC Battery Operation Before installing batteries (not included), ensure that the unit is disconnected from the mains supply. Remove the battery compartment cover on the bottom of the unit by sliding the battery cover with the opening direction indicated on the battery cover. Install 8 pieces of 1.5V (UM2) batteries (not included) by following the polarity markings and then replace the cover. For battery operation, unplug the AC cord from the AC wall outlet first and then remove the AC cord from the socket at the back of the main unit. Caution: There is a danger of explosion if batteries are replaced incorrectly. Replace batteries with the same type and same brand only. When the unit is intended for being unused for a long period of the time, press the button to turn OFF the unit and remove all batteries from the main unit Main Operation Switching On for the first time Plug into AC power or install batteries by following instructions on the previous Pow er Con nection section. Press the button to turn on the unit. The indicator will be lighted off. To turn the unit off, press the button again to turn the unit off. Switching between different sources (AM/FM/CD/BLUETOOTH) After turning on the unit, press and toggle FUNCTION switch to select different sound sources. Adjusting sound volume level After turning on the unit, turn the VOLUME knob to adjust the level of sound volume. Adjusting the rod antenna The aerial should be extended to ensure good reception in both FM radio modes. It may be necessary to adjust the position of the unit and /or aerial position to achieve the best signal reception. CD Operation The unit is designed to play normal music CD disc bearing the correct identification logo. If the disc does not confirm tothe standard, it may not be played back properly. Caution: Playback of CD-R / CD-RW may depend on recording conditions. Do not attach a seal or label to either side (the recordable side or the labeled side) of a CD-R/ RW disc. It may cause malfunction. Do not load a blank CD-R/ RW disc. It will take over 1 minute to read the disc. The disc may be damaged if you try to open the CD Door while reading the disc. CD-ROM, CD-I, CDV, VCD, DVD or computer CDs are not possible to be read. Loading disc 1. Press and toggle the FUNCTION button to switch to CD mode. 2. Press down the OPEN/CLOSE AREA on the CD door on the top of the unit to unlock and open the CD door. 3. Hold the CD disc by its edge with CD graphical side facing up and put it onto the CD compartment after the CD door is opened. Make sure that the disc label is facing up. 4. Close the CD door and make sure the VOLUME knob is not in minimum position. CD playback After loading the disc, the disc will begin spinning and the total number of the tracks on the disc will be shown on the display and the first track/file on the CD will be played back automatically. Remark: If there is no disc in the unit, “NO” will be indicated on the display. If the CD cannot be read, “NO” will be indicated on the display. Play/Pause Control To pause playback temporarily by pressing the PLAY/PAUSE button. Music playback will be paused and the current elapsed track number will be shown on the display and the play icon will be blinking. Press the PLAY/PAUSE button again to resume playback. Stop playback To stop playback, press the STOP button on the unit. The total number of tracks of the disc will be displayed. Skip track During playback, press the forward or backward SKIP buttons to skip to the next or previous tracks. High-speed music search During playback, press and hold the forward or backward SKIP buttons to skip/search through the current track at high speed in forward or backward directions. When the SKIP buttons are released, normal playback speed will be resumed immediately. CD Operation-Continued Repeat playback modes (Repeat 1 / Repeat all) Repeat the Current Track During playback, press the REPEAT button once to repeat the current CD track. Repeat All Tracks During playback, press the REPEAT button twice to repeat the entire album. Return to normal playback Press the REPEAT button until NO repeat indicator is displayed. The normal playback will be resumed. Programmed CD playback This unit can be programmed to play up to 20 tracks in CD mode. Load the music CD disc onto the CD compartment (without pressing the “PLAY/PAUSE” button) 1. Press PROGRAM button once in the stop mode. “P01” will be shown on the display and blinking. 2. Press the SKIP buttons to select the desired track to be programmed. 3. Press PROGRAM button again to save the selected track/files. 4. Repeat steps 2-3 to program up to 20 tracks. 5. Press the PLAY/PAUSE button to play the programmed tracks after programming is completed. The “PROG” indicator will lit. 6. To clear program and resume normal playback, press the STOP button twice during playback, or open the CD door, or change to next mode to clear the programmed tracks. Remark: The unit can store up to 20 tracks in the programmable memories. During the programmed playback, user can still select the “repeat 1 / repeat all” functions. Bluetooth Operation 1. If the unit has never been paired with a Bluetooth device before, you need to follow the pairing instructions below to link the SRCD268BT with your Bluetooth device. • Press the button to turn on the unit. • Press and toggle the FUNCTION button to select Bluetooth mode. The unit will search the paired device with the “BLUETOOTH” Indicator lit. • Press and hold the STOP/PAIR Button for 4~5 seconds. Then the “BLUETOOTH” Indicator is flashing, the unit will goes into Pairing/Discoverable mode. • Turn on the Bluetooth function of your Bluetooth device and enable the search or scan function to find the unit. • Select "SRCD268BT" from the device list when it appears on your device screen. If required, enter the pass code “0000” to pair (link) the unit with your device. • After successfully pairing (linking) the Bluetooth enabled device the “BLUETOOTH” Indicator steadily and a short beep will heard. Note: If you can’t pair the unit with your Bluetooth enabled device, you can try to turn Off & On the power of your unit to solve the problem. Radio Operation The unit is designed to receive FM Stereo / FM and AM radio bands. 1. Switch and toggle the FUNCTION button on the top of the unit to switch to AM or FM mode. 2. Adjust the TUNING knob on the top of unit to tune the frequency of desired radio station. 3. To turn off the unit power, press the button to switch off the unit. Remark: The unit has built-in AM ferrite bar antenna, which can provide adequate reception in most areas. If the AM reception is weak, try to adjust the location of the unit or relocate the unit to improve the reception. If the FM reception is weak, try to adjust the length and the angle of the FM antenna to improve the signal reception. AUX IN Operation Setting up (AUX IN) connection AUX-IN jack will allow you to connect external music player or external sound source to the main unit. 1. Plug into a 3.5mm audio cable (not included) into your external music player and connect the other end (3.5mm jack) into the AUX IN jack on the top of the unit. 2. Make sure your external music player is turned on and start music playback on the music player 3. Adjust VOLUME knob to control the sound level of music playback from the speakers on the unit. Specifications Power Output. . . . . . . . . . . . . . . . . . AC Power ............ Battery Size ................ Radio Frequency. . . . . . . . . . . . . . . 1.2 watt RMS x 2 channels AC120V~60Hz 14Watts UM-2 or C-Size batteries x 8 PCS FM: 87.5 – 108MHz , AM: 520- 1710 kHz 10 LIMITED PRODUCT WARRANTY This quality product is warranted to be free from manufacturer’s defects in material and workman-ship, provided that the unit is used under the normal operating conditions intended by the manufacturer. Should you have any problem with this product, please and it is highly recommended to visit our website at www.curtisint.com before you take any other steps as we have additional copies of instruction manuals, operating manuals and trouble shooting tips on our website which gives you the answer on most of the questions you could have in operating the unit. TERMS OF WARRANTY C.I. Service Dept. warrants this product to be free from defects in materials and workmanship for 90 days on parts and 90 days on labor. If you originally purchased your product more than 90 days ago, a repair fee may apply. Nothing within this warranty shall imply that C.I. will be responsible or liable for any damage to any items placed in this product, whether due to any defect of the product, or its use, whether proper or improper. EXCLUSIONS Save as herein provided, C.I. Service Dept. (Canada) or C.I. Service Dept. (USA), there are no other warranties, conditions, representations or guarantees, express or implied, made or intended by C.I. or its authorized distributors and all other warranties, conditions, representations or guarantees, including any warranties, conditions, representations or guarantees under any Sale of Goods Act or like legislation or statue is hereby expressly excluded. Save as herein provided, C.I. Service Dept. (Canada) or C.I. Service Dept. (USA), shall not be responsible for any damages to persons or property, including the unit itself, howsoever caused or any consequential damages arising from the malfunction of the unit and by the purchase of the unit, the purchaser does hereby agree to indemnify and save harmless C.I. from any claim for damages to persons or property caused by the unit. TO OBTAIN REPAIRS UNDER THE TERMS OF THIS WARRANTY 1. The original purchaser must present a copy of the original bill of sale and the service warranty card. 2. Any alterations, abuse, misuse, battery corrosion or accidental damage voids the warranty. 3. The warranty does not cover cabinets and accessories. 4. No warranty or insurance contained or set out shall apply when damage or repair is caused by power failure; damage in transit or when moving the unit; improper power supply; use for commercial or industrial purposes; service calls resulting in customer education, etc. 5. The defective product should be mailed to: Canada C.I. Service Dept. 315 Attwell Drive Toronto, ON M9W 5C1 U.S.A Curtis International Ltd c/o Liquidity Services/Liquidation.com 1399 Perry Road Plainfield, IN 46168 For service assistance and product information, please call: 1-800-968-9853. If mailing the product, the freight must be prepaid and a money order for $7.00 should be included to cover the cost of insurance and the return of the product. 6. C.I. reserves the right to repair or replace the parts which have become defective. Model No. Date Purchased Serial No.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Create Date : 2014:04:03 17:19:43+08:00 Creator : Adobe Illustrator CS5 Modify Date : 2015:01:06 15:16:38+08:00 XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Producer : Acrobat Distiller 9.0.0 (Macintosh) Creator Tool : Adobe Illustrator CS5 Metadata Date : 2015:01:06 15:16:38+08:00 Thumbnail Width : 180 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 10021 bytes, use -b option to extract) Document ID : xmp.did:F97F1174072068118C14AFB9BFC5EFC0 Instance ID : uuid:2de0513b-c03f-4187-9969-7bcd662b7f05 Original Document ID : uuid:70942CEB395111E2A111D94C430C8743 Rendition Class : proof:pdf Version ID : 1 Derived From Instance ID : uuid:548cd044-4b44-11e2-9535-0017f203ce1c Derived From Document ID : uuid:70942CEB395111E2A111D94C430C8743 Derived From Original Document ID: uuid:70942CEB395111E2A111D94C430C8743 History Action : converted, saved, converted, converted History Parameters : from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator, from application/postscript to application/vnd.adobe.illustrator History Instance ID : xmp.iid:F97F1174072068118C14AFB9BFC5EFC0 History When : 2014:03:24 10:53:47+08:00 History Software Agent : Adobe Illustrator CS5 History Changed : / N Pages : 1 Has Visible Transparency : False Has Visible Overprint : False Max Page Size W : 148.016805 Max Page Size H : 210.087263 Max Page Size Unit : Millimeters Font Name : Arial-BoldItalicMT, ArialMT, Arial-BoldMT, Arial-ItalicMT, ArialSpecialG1-Bold, ArialSpecialG1-BoldItalic, Helvetica, TimesNewRomanPS-BoldMT Font Family : Arial, Arial, Arial, Arial, Arial Special G1, Arial Special G1, Helvetica, Times New Roman Font Face : Bold Italic, Regular, Bold, Italic, Bold, Bold Italic, Regular, Bold Font Type : Open Type, Open Type, Open Type, Open Type, TrueType, TrueType, TrueType, Open Type Font Version : Version 2.90, Version 3.00, Version 3.00, Version 2.90, Version 1.03, Version 1.03, Version 1.3 (Hewlett-Packard), Version 3.00 Font Composite : False, False, False, False, False, False, False, False Font File Name : ARIALBI.TTF, ARIAL.TTF, ARIALBD.TTF, ARIALI.TTF, Arial Special G1 Bold.ttf, Arial Special G1 Bold Italic.ttf, Helvetica.ttf, TIMESBD.TTF Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : 默认色板组 Swatch Groups Group Type : 0 Trapped : False Nrpages : 1 Startlogpage : 1 Units : mm Vsize : 209.9999295 Hsize : 147.9999240 Margtop : 0 Margbot : 0 Margleft : 0 Margright : 0 Vshrink : 1 Hshrink : 1 Readerspread : False Inks Name : black Inks Type : process Inks Book : process Inks Egname : black Inks Frequency : 120 Inks Angle : 82.5 Inks R : 0.137420654 Inks G : 0.122787476 Inks B : 0.126068115 Inks Attribute : normal Format : application/pdf Title : untitled GTS PDFX Version : PDF/X-1:2001 GTS PDFX Conformance : PDF/X-1a:2001 Fonts Name : Helvetica lihava Fonts Type : TrueType Fonts Location : local Fonts Protection : False Coverage : . Layers Name : Layer 1 Layers Printable : True Layers Locked : False Pagelist Start : 0 Pagelist End : 0 Pagelist Inks : 1 Page Count : 12EXIF Metadata provided by EXIF.tools