MET METYH903 BLUETOOTH PORTABLE RADIO BOOMBOX User Manual

MET INDUSTRIAL LTD BLUETOOTH PORTABLE RADIO BOOMBOX

User Manual

MODEL NO. SRC1227BTOWNER'S MANUALPORTABLE BLUETOOTH BOOMBOXWITH FM RADIOPLEASE READ BEFORE USING THIS UNIT
1This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.
2Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.12.Read these instructions – All the safety and operating instructions should be read before this product is operated. Keep these instructions – The safety and operating instructions should be retained for future reference. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.Follow all instructions – All operating and use instructions should be followed. Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like.Clean only with dry cloth.Do not block any ventilation openings. Install in accordance with the manufacture’s instructions.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.Only use attachments/accessories specified by the manufacturer.1.2.3.4.5.6.7.8.9.10.11.13. Unplug this apparatus during lightning storms or when unused for long periods of time.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.This apparatus shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases shall be placed on the apparatus.Main plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus completely, the main plug should be disconnected from the main socket outlet completely. Battery shall not be exposed to excessive heat such as sunshine, fire or the like.14.15.16.17.18.
319. 25.Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ● Reorient or relocate the receiving antenna.● Increase the separation between the equipment and receiver.● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.● Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.26.27.
Control Location (Top Views) Control Location (RearView)4PRE-PRE+ VOLUME+VOLUME-AUTO SCAN/MODE PRESET/PAIRCarry HandleMode ButtonPreset Up ButtonPreset Down ButtonTunning Down & Reverse ButtonPreset & Pair ButtonPlay/Pause & Auto Scan ButtonTunning Up & Forward ButtonVolume Down ButtonVolume Up ButtonPower ButtonLCD DisplayAC ~AUX INAUX In JackAC Socket
Connecting AC PowerConnect the small end of AC cord to the socket at the back of the main unit and insert the plug of AC cord into standard AC wall outlet.Battery Operation Before installing batteries (not included), ensure that the unit is disconnected from the mains supply.Remove the battery compartment cover on the bottom of the unit by sliding the battery cover with the opening direction indicated on the battery cover.Install 4 pieces of 1.5V (UM2) batteries (not included) by following the polarity markings and then replace the cover.For battery operation, unplug the AC cord from the AC wall outlet first and then remove the AC cord from the socket at the back of the main unit.Caution:The unit is designed to operate from mains supply of AC 120V~60Hz. If the plug of AC cord does not fit properly, try to turn it over and try again. Do not force it.When the unit is intended for being unused for a long period of the time. Please press the Power button to turn off the unit and unplug the power cord from the AC wall outlet. ACPower Connection5AC ~AUX INBATT. SUPPLY: UM-2 / LR14 / SIZE “C” 1.5V x 4
Main Operation Caution:There is a danger of explosion if batteries are replaced incorrectly.Replace batteries with the same type and same brand only.When the unit is intended for being unused for a long period of the time, press thePOWER button to turn OFF the unit and remove all batteries from the main unit.6Plug into AC Power or install batteries by the instructions on the previous section.Press the Power button to turn on the unit. The LCD Display will lit.To turn off the unit, press the Power button again to turn it off.•Press the POWER button to turn on the unit.•Press and toggle the Mode button to select Bluetooth mode. The unit willsearch the paired device.•Press and hold the Preset / Pair button for 4~5 seconds. The unit will goes intoPairing mode.•Turn on the Bluetooth function of your Bluetooth device and enable the search orscan function to find the unit.•Select "SRC1227BT ecived eht morf" li ecived ruoy no sraeppa ti nehw ts sc fI .neerrequired, enter the pass code “0000” to pair (link) the unit with your device.•After successfwilll heard. ully pairing (linking) the Bluetooth enabled device and a short beep Note: If you can’t pair the unit with your Bluetooth enabled device, you can try to turn Off & On the power of your unit to solve the problem.An FM antenna is built into the unit. To improve FM radio reception, adjust the position of the unit.Auto Tuning the FM Radio1. Press the Power button to turn the unit on.2. Press the Mode button to switch to FM Radio Mode.3. Press and hold Autoscan and Play Pause button.4. The unit will scan all local FM radio station and store in preset memory(Maximum can store 20 preset memories). Manual Tuning the FM Radio1. Press the Power button to turn the unit on.2. Press the MODE button to switch to FM Radio Mode.3. Press the Tuning Up & Down button to tune the radio manually4. Hold down the Tuning Up & Down button to scan for available stations.1. If the unit has never been paired with a Bluetooth device before, you need to follow thepairing instructions below to link the SRC1227BT with your Bluetooth device.Bluetooth OperationRadio Operation
•Press the POWER button to turn on the unit.•Press and toggle the MODE button to select Bluetooth mode. The unit willsearch the paired device with the “BLUETOOTH” Indicator lit.•Press and hold the PRESET/PAIR Button for 4~5 seconds. Then the “BLUETOOTH”Indicator is flashing, the unit will goes into Pairing/Discoverable mode.•Turn on the Bluetooth function of your Bluetooth device and enable the search orscan function to find the unit.•Select "SRC1227BT " fro m th e devic e li st whe n it appea rs on yo ur devic e screen. Ifrequired, enter the pass code “0000” to pair (link) the unit with your device.•After successfully pairing (linking) the Bluetooth enabled device the “BLUETOOTH”Indicator steadily and a short beep will heard.Note: If you can’t pair the unit with your Bluetooth enabled device, you can try to turn Off & On the power of your unit to solve the problem.Radio OperationThe unit is designed to receive FM Stereo radio bands.1. Switch and toggle the MODE button on the top of the unit to switch to FM mode.2. Adjust the TUNING knob on the top of unit to tune the frequency of desired radiostation.3. To turn off the unit power, press the POWER button to switch off the unit.Remark:If the FM reception is weak, try to adjust the length and the angle of the FM antenna to improve the signal reception.1. If the unit has never been paired with a Bluetooth device before, you need to follow thepairing instructions below to link the SRC1227BT with your Bluetooth device.Bluetooth Operation7
1. Plug into a 3.5mm audio cable (not included) into your external music player andconnect the other end (3.5mm jack) into the AUX IN jack on the rear of the unit.2. Make sure your external music player is turned on and start music playback on the music player 3. Press Mode button and change to AUX IN mode and the unit will playback your external device.Power Output. . . . . . . . . . . . . . . . . . 1.0 watt RMS x 2 channelsAC Power . . . . . . . . . . . . AC120V~60HzBattery Size . . . . . . . . . . . . . . . . UM-2 or C-Size batteries x 4 PCSRadio Frequency. . . . . . . . . . . . . . . FM: 87.5 – 108MHzSetting up (AUX IN) connectionAUX-IN jack will allow you to connect external music player or external sound source to the main unit. AUX IN OperationSpecifications8Maunal Saving and Playing a Station as a Preset1. Tune to the desired station2. Press the Preset button. Preset number “P01” will appear on the displays3. Press the Tuning Up & Down button to adjust to the desired preset number.“P01”-”P20” (20 preset memories)4. Press the Preset button to save the current radio station to theselected preset which can store 20 stations.5. Press the PRE+/PRE- button to cycle through preset radio stations.

Navigation menu