MGA Entertainment 337966F7 Mobile Handset User Manual 337966F7 MS MBHS IM 1 8

MGA Entertainment (HK) Ltd. Mobile Handset 337966F7 MS MBHS IM 1 8

User Manual

5  6  7  8 1  2  3  4 MESSAGES•  In Mode “B,” access the Menu, highlight the  envelope diagram, then press “OK”.NOTE: You can save 9 Inbox messages and 8 messages in the Sent Folder.CONTACTSIn Mode “B,” press the       and       keys until the “CONTACTS” icon is highlighted (Fig. 7). Press “OK”.QUICK STARTIMPORTANT NOTE WHEN REPLACING BATTERIES:If batteries are removed and replaced within a ONE MINUTE TIME SPAN, SAVED messages in both the INBOX and SENT area and messages in the phone book will be retained. (Clock will need to be reset and To-Do List messages and Notepad messages will be lost.) If the unit loses power for more than one minute due to battery change or static shock, ALL messages will be lost.OTHER NOTES•  Each Mobile Handset’s preset ID number is 0000 0000.•  To TEXT message another Mobile Handset, an ID number must be set in    each unit.•  To set or change an ID number see page 12.•  To see the ID number of your Mobile Handset see page 3.•  To enter/store ID numbers of other units to your contact list, see “functions”    on page 5.•  For VOICE chat, there is no need to know the ID of the unit with which you    are chatting.•  To turn your unit on and off, press and HOLD the ON/OFF button for several  seconds.•  Before using the unit, turn the volume control on the side of the unit to  mid-range.•  Before text messaging it’s best to set up an ID number for each unit. To do so:  1.  In Text Mode with no icons highlighted on the Menu, press **00000000##    and “OK” to confirm.  2.  Press 9, then “OK” to confirm.  3.  Enter a new 8 digit ID number and press “OK” to confirm.  4.  To check that your number is entered correctly, go to Menu and, with no    icons highlighted, press the ID key on the side of the unit.INTRODUCTIONThese single channel FRS Mobile Handsets allow friends to talk or text messageup to 2 miles! Mobile Handset units also include a clock, note pad, alarm andphone book.CONTENTS• 2 SMS Mobile HandsetsBEFORE YOU BEGINGet ready to talk and text to friends by first installing batteries in your Mobile Handsets.1.  Using a Phillips screwdriver (not included) remove the   screw and battery compartment cover from the back   of the Mobile Handset. (Fig. A)2.  Install four (4) AAA alkaline batteries (not included)   making sure the (+) and (-) ends face the proper   direction as indicated inside the battery   compartment.3.  Replace the compartment cover and tighten   the screw.KEY LAYOUTS AND FUNCTIONSKeypadItem no. 337966F7, 337966F7C ADULT BATTERY INSTALLATIONAAA/1.5V/LR03AAA/1.5V/LR03AAA/1.5V/LR03AAA/1.5V/LR03Fig. A4 65123Slide switch, which allowsyou to select Talk mode orText mode.Mode “A” is Talk mode.Mode “B” is Text mode.Key1. Talk/Text switchGo to Menu. With no icons highlighted, press to see your current ID number.To view your ID the unit must be in “B”  (Text) Mode.2. IDPress to talk, release to listen.To transmit your voice, unit must be in “A” Talk Mode.3. TalkPress and HOLD to switch the unit ON or OFF. (Welcome Screen and ID number will appear, followed by the Menu screen.)To switch ON and OFF unit can be in either “A”  (Talk) Mode or “B”  (Text) Mode.4. PowerHighlights and selects menu and other items. (Center “OK” key confirms selection.)5. Four Direction Keys   and “OK” key.Cancels your selection.6. CancelFunctions NotesSymbol Screen in Text (“B”) mode.To switch from upper to lower case, Press * (or the Shift Key)     Example:  ABC, or abc# * , . ? ! ; @ + - /= : _ \ / $ % ^ ( )< > { } [ ]To access symbols:1. Highlight Message Mode    (envelope) on Menu and press    “OK” to confirm.2. Highlight “New”, then press “OK”    to confirm.3. Press #, rapidly until you reach    the desired symbol.NOTES:  Use directional keys to go back.  Use the #1 Key for Commas and Periods. MAIN FEATURESTALKING FUNCTIONTalking and Listening  In “A” Mode, (the screen will say Talk/Listen) press and hold the Talk button and speak into the unit. Release the button to listen.Adjusting the VolumeFunction StepAdjust the volume using control dial on sideof unit.Press “Talk” to talk with the other Mobile Handset user. Release “Talk” to listen to the other user voice. In Mode A1.  Highlight the “envelope” on the menu and press “OK”.2.  Press     to highlight “NEW” then Press “OK”3.  Type your message using the keypad. Press “OK”.4.  Use the     or     to highlight “NEW NUMBER” then  press “OK”.5.  Input the new ID number, then press “OK”.6.  A new menu will appear.7.  Select “SEND ONLY” to send the message only.8.  Select “SAVE” to save the message only.9.  Select “SAVE SEND” to save and send the message.NOTE: Number will NOT be saved to your address book.To create a message to be sent to a Mobile Handset which has already had its ID number saved on your contact list.To create a message to a Mobile Handset which has NOT had its ID saved to your contact list.To check the messages in your “Inbox”.Function Step1.  Highlight the “envelope” on the menu and press “OK”.2.  Press     or     to highlight “INBOX” (Fig. 1) then    press “OK”.3.  The sender of your first message will be shown.4.  Press “OK” to read the message. Press “OK” again to  see time and date sent.5.  Press Cancel to return to beginning of message.6.  Use the     or      keys to scroll to the next message.1.  Highlight the “envelope” on the menu and press “OK”.  Press     to highlight “NEW”, then Press “OK”.2.  Type your message using the keypad by pressing the  keys quickly until you reach the desired letter, then  press OK.3.  When finished, press “OK” and the CONTACT screen  will appear.4.  Press     or     to highlight CONTACT. Press “OK”.5.  Using     or     to select the message recipient.   Press “OK”.6.  A new menu will appear.7.  Select “SEND ONLY” to send the message but not  save it. Select “SAVE” to save the message only.  Select “SAVE SEND” to save and send the message.Similar to the steps in “Check Inbox.”7.  Press     to go to the screen shown in  Fig. 6.8.  Select “SAVE” and Press “OK” to    save the message.9.  Select “DELETE” and Press “OK” to  delete the message.10. Select “FORWARD” and Press “OK”  to forward the message to others.11.  Select “REPLY” , write a message,  and Press “OK” to reply the sender.NOTE: A maximum of 9 messages can be saved.They will be numbered from 1 to 9 on the screen.A “closed lock” icon       means the message was saved.An “open lock” icon       means the message was NOT saved.The Mobile Handset can receive messages in SMS (text) model. A text cycle is 30 seconds long. Once you type in and send a message, your unit will stay in send mode for the remainder of the 30 second cycle. During that time you will not be able to receive messages.Check SentboxReceiving messagesSAVEDELETEFORWARDREPLYFig. 6WRITE           AFig. 6ASEND SMS...Fig. 6B To save information regarding a contact, first.Fig. 111.  Highlight the “Contacts” icon from the Menu and press  “OK".2.  Use the     or     keys to highlight “ADD.” (Fig. 8) and  press “OK”.3.  Input your friend’s ID number and Press “OK”.4.  Input your friend’s name and press “OK”.5.  A new menu (Fig. 11) will appear.6.  To input a friend’s birthday information, use the     or  keys to highlight the “BIRTHDAY” cake icon and press  “OK”.7.  Use the keypad to input the information, then press    “OK”.8.  To input a friend’s cell phone number, use the     or  keys to highlight the “CELL PHONE” icon and press  “OK”.9.  Use the keypad to input the information, then press    “OK”.10.  To input a friend’s email address, use the     or     keys  to highlight the “@” sign, then press “OK”.11.  Use the keypad to input the information, then press    “OK”.12. To input a friend’s home address, use the     or     keys  to highlight the “HOUSE” icon and press “OK”.13.  Use the keypad to input the information, then press    “OK”.SearchFunction Step1.  Use the     or     keys to highlight “PHONE BOOK”.   (Fig. 8) Press “OK”.2.  Use the     or     keys to reach the contact name you    wish. Press “OK”.3.  A new menu (Fig. 10) will appear.4.  To see the contact’s record, use the     or     keys to  highlight “VIEW” and press “OK”.5.  To edit information on the entry, use the     or     keys to  highlight “EDIT.” Press “OK,” then use the keypad to  update the information.6.  To remove a contact, use the     or     keys to highlight  “DELETE” and press “OK”.Fig. 7 Fig. 8 Fig. 9 Fig. 10Fig. 14 Fig. 15TOOLSIn Mode “B,” press the       and       keys to highlight the “CLOCK” icon on the menu.  (Fig. 14)Press “OK” and a new screen (Fig. 15) will appear.To see the time and date CURRENTLY displayed on the unit:Setting the alarm.Setting the countdown function.Using the stopwatch.Setting the time.Function StepSee “To Adjust the Time Setting” on page 11 for complete instructions as to how to set the correct time.1.  Use the     and     keys to highlight the    “COUNTDOWN” icon and press “OK”.2.  Use the keypad to set the time you wish to countdown  from and press “OK”.3.  Press “OK” to start the countdown.4.  Press “OK” again to stop the countdown.1.  Use the     and     keys to highlight “STOPWATCH”  and press “OK”.2.  To start the stopwatch, press “OK”.3.  To stop the stopwatch, press “OK" again.To set the Alarm, Countdown and Stopwatch functions: 1.1.  First access the “Clock” icon from the Main Menu    then follow directions below.2.  Use the     and     keys to highlight the “ALARM” icon  and press “OK”.3.  Use the     or     to highlight “SET” and press “OK”.4.  Use the keypad to input the alarm time you wish and  press “OK”.5.  Use the     or     to highlight ALARM, then press “OK”  to toggle between ALARM ON and ALARM OFF    until you reach the desired setting then press    CANCEL.
1.  Highlight SET-UP on the  Menu.2.  Using the     and     keys,    highlight “TIME” and    press “OK”.3.  Use the keypad to adjust  the time and date.  EXAMPLE:  To set the time to    12:34 PM, press 1, 2,    3, 4,     and press “OK”.www.bratz.comTM & © MGA Entertainment, Inc.BRATZ™, BRATZ PETZ™, LIL’ BRATZ™, BRATZ BABYZ™, BRATZ KIDZ™ and all related logos, names, characters, distinctive likenesses and slogans, as well as the packaging and images appearing thereon, are the exclusive property of MGA. 16300 Roscoe Blvd.Van Nuys, CA 91406 USA(800) 222-4685Printed in China.0507-0 EThe preferred method of contact for  Customer Service is through our e-mail  contact form at www.mgae.com  Please keep this manual as it contains important information. 13 14 15 169 10 11 12FCC WARNING STATEMENTFCC ComplianceNOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  •  Reorient or relocate the receiving antenna.  •  Increase the separation between the equipment and receiver.  •  Connect the equipment into an outlet on a circuit different from that to      which the receiver is connected.  •  Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Warning: Modifications not authorized by the manufacturer may void users authority to operate this device.IC RSS210 WARNING STATEMENTThis device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Operation temperatureThe product can only be operated from 0 degrees centigrade to 35 degrees centigrade.Warning: Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.Warning: Any adjustment to this equipment is recommended to be performed by or under the immediate supervision and responsibility of a person certified as technically qualified to perform transmitter maintenance and repair duties in the private land mobile services and fixed services by an organization or committee representative of users of those services.Warning: Replacement of any transmitter component (crystal, semiconductor, etc.) for this equipment could result in violation of FCC rules.SAFETY INFORMATIONYour wireless hand-held portable transceiver contains a low power transmitter. When the Push-to-Talk (PTT) button is pushed it sends out radio frequency (RF) signals. The device is authorized to operate at a duty factor not to exceed 50%. In August 1996, the Federal Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for hand-held wireless devices.CAUTION: To maintain compliance with the FCC's RF exposure guidelines hold the transmitter and antenna at least 1 inch (2.5 centimeters) from your face and speak in a normal voice, with the antenna pointed up and away from the face.Use only the supplied antenna. Unauthorized antennas, modifications, or attachments could damage the transmitter and may violate FCC regulations.This Class B digital apparatus complies with Canadian ICES-003.SAFE BATTERY USAGE•  Use alkaline batteries for best performance and longer life•  Use only the type battery recommended for the unit.•  Batteries should be replaced only by an adult.•  Insert batteries with the correct polarity ( + and – ).•  Do not mix different types of batteries or old and new batteries.•  Do not short-circuit batteries.•  When not used for an extended time, remove batteries to prevent possible  leakage and damage to the unit.•  Do not mix rechargeable and non-rechargeable batteries.•  Rechargeable batteries are to be removed from the toy before charging.•  Rechargeable batteries are to be recharged only under adult supervision.•  Do not recharge non-rechargeable batteries.•  Exhausted batteries are to be removed from the units.•  Do not dispose of batteries in fire as they may leak or explode.DISPOSAL OF BATTERIES: Do not treat old batteries as household waste.Take them to a designated recycling facility.NOTE: The voltage of a fully-charged, rechargeable battery is often lower thanthat of a fresh alkaline battery. Therefore, it is recommended that alkalinebatteries be used instead of rechargeable batteries for best performance and forlongest play time.SETTINGS•  In Mode “B”, press the       and       keys to highlight the “SETTINGS’ menu.   (Fig. 20)•  Press “OK”.CHECKING YOUR ID NUMBER•  To check your ID number, go to “B” Mode, press the CANCEL key until no  icons are highlighted, then press the “ID” key on the side of your Mobile  Handset.TO CHANGE ID NUMBER OR ERASE ALL DATA•  To change your ID number, go to “B” Mode, press the CANCEL key until no  icons are highlighted, then press **00000000## then press “OK".To adjust any of the 2 items below, first go to “B” Mode, press the CANCEL keyuntil no icons are highlighted, then press **00000000## and “OK” then press 0or 9.Fig. 19•  Press “OK” to move to the next note.NOTE:  You can save a maximum of 8 notes.APPLICATIONS•  In Mode “B”, press     the     and keys to highlight the “EXTRAS” menu.   (Fig. 19)•  Press “OK”.•  Use the keypad to Input any notes you wish and press       .  •  A new menu (Fig. 18) will appear.•  To save your notes, use the       or       keys to highlight “SAVE” and press “OK”.•  To erase your notes, use the       or       keys to highlight  “DELETE” and press    “OK”.Fig. 16 Fig. 17NOTE 1 AFig. 18SAVEDELETENOTES•  In Mode “B,” use the       and       keys to highlight“ the “NOTEPAD” icon on the    menu (Fig. 16).•  Press “OK” and a new menu (Fig. 17) will appear.Go to movies withJimmyTASK                    ATASK TIME12:34 PMTo do listFunction Step1.  Use the     or     keys to highlight  “TO DO LIST” then press “OK”.2.  The current month and year will    be shown.3.  Use the     or     keys to scroll  through the “TO DO LIST”.4.  Press the     key to highlight the  date you want select   e.g. 2007 Jan 2nd5.  Press the      key to select   2007 Jan 2nd6.  Select “EDIT” to input a To-Do List  message  e.g. “Go to movies with Jimmy”7.  Use the keypad to input your  message.8.  After you have input your    message, press “OK”. “TASK    TIME” will appear.9.  To set the time to 12:34 PM,    press 1     2     3     4 and     to  select “PM”.10.  Once you have set the “time” on  the To-Do List message, press    “OK” to save it.11.  To Delete a saved message,  highlight the date of the message    then press the right arrow.12.  Select “DELETE” to delete the  message, then press “OK”.EDITDELETE101-2007            <>23101-200723Fig. 20 Fig. 21To select a Ring Tone.To adjust the Ring Volume.Function Step1.  Highlight SET-UP on the Menu.2.  Using the     and     keys, highlight “RING TONE” and  press “OK”.3.  Using the     and     keys, highlight the ring tone you  desire and press “OK”.NOTE: Five pre-set ring tones are available and a sample of each will play when highlighted.1.  Highlight SET-UP on the Menu.2.  Using the     and     keys, highlight “RING VOL” and  press “OK”.NOTE: Eight pre-set volume settings are available and a sample of each will play when highlighted.To adjust the Time Setting.NOTE: After you change your batteries, the Mobile Handset will automatically be reset. The initial setting of time and date will revert to 12:00 AM, 2007 Jan 1st12:00 AM2007.01.0212:34 PM2007.01.02In Text Mode with no icons highlighted on the Menu, press **00000000## and “OK” to confirm.1.  Press “0”2.  Press CancelTo erase the data in your mailbox, to-do list,  and phone bookIn Text Mode with no icons highlighted on the Menu, press **00000000## and “OK” to confirm.1.  Press 9, then “OK” to confirm.2.  Enter a new 8 digit ID number and press “OK” to    confirm.3.  Press CancelTo change the ID‘Let’s care for the environment!’The wheelie bin symbol indicates that the product must not be disposed of with other household waste. Please use designated collection points or recycling facilities when disposing of the item

Navigation menu