MGA Entertainment 365488 Bratz Movie Theme Rock Star Headset (Transmitter) User Manual 360155 MS SigUCam IM
MGA Entertainment (HK) Ltd. Bratz Movie Theme Rock Star Headset (Transmitter) 360155 MS SigUCam IM
Manual
Item no. 365488
www.bratz.com
TM & © MGA Entertainment, Inc.
BRATZ™, BRATZ PETZ™, LIL’ BRATZ™,
BRATZ BABYZ™, BRATZ KIDZ™ and all
related logos, names, characters,
distinctive likenesses and slogans,
as well as the packaging and images
appearing thereon, are the
exclusive property of MGA.
16300 Roscoe Blvd.
Van Nuys, CA 91406 USA
(800) 222-4685
Printed in China.
0507-0-E
The preferred method of contact for
Customer Service is through our e-mail
contact form at www.mgae.com
Please keep this manual as it contains important information.
FCC Compliance
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Caution: Modifications not authorized by the manufacturer may void users authority to operate this
device.
Look and sound like a rock star with this awesome headset microphone! Just attach your MP3 player
to the transmit module and hook it to your belt. Both your MP3 player’s music and your voice will
come out through the radio together! Sing along with your fav MP3’s and belt it out like the pros!
FCC STATEMENT
14
AGES 4+
ADULT BATTERY INSTALLATION REQUIRED.
‘Let’s care for the environment!’
The wheelie bin symbol indicates that the product must not be disposed of with other household
waste. Please use designated collection points or recycling facilities when disposing of the item.
INTRODUCTION
CONTENTS
• 1 Bratz Movie Headset Boom Mic
• 1 Audio Cable
• 1 Microphone Transmit Module with the following parts:
a) MP3 Player Holder
b) On/Off Switch
c) Microphone Volume Dial
d) MP3 Player Volume Dial
e) Headphone Cord Jack
f) Audio Input Jack
g) Antenna
h) Belt Clip
NOTE: MP3 Player and FM radio
not included.
MP3/audio in
Microphone
volume
decrease
MP3/audio in
volume
decrease
MP3/audio in
volume
increase
Microphone
volume
increase
Bottom
Front
Headset in
On/Off Switch
11. Turn On your MP3 Player and play your
favorite music track. You will hear it through
the radio!
12. Talk through your headset microphone and
your voice will also come through the radio!
13. Turn the Microphone Volume Dial clockwise
and the MP3/Audio In volume
counter-clockwise until both are at a
comfortable listening level. (Fig. 3).
14. Now you can sing into your microphone and
you will hear your voice through the radio
along with music from your MP3 Player!
Rock on!
• Your FM Microphone has been fully tested and adjusted prior to shipment. Do not attempt to
touch, replace or service any of components inside.
• After use, turn your microphone OFF to save the batteries.
• Use alkaline batteries for best performance and longer life
• Use only the type battery recommended for the unit.
• Batteries should be replaced only by an adult.
• Insert batteries with the correct polarity ( + and – ).
• Do not mix different types of batteries or old and new batteries.
• Do not short-circuit batteries.
• When not used for an extended time, remove batteries to prevent possible
leakage and damage to the unit.
• Do not mix rechargeable and non-rechargeable batteries.
• Rechargeable batteries are to be removed from the toy before charging.
• Rechargeable batteries are to be recharged only under adult supervision.
• Do not recharge non-rechargeable batteries.
• Exhausted batteries are to be removed from the toy.
• Do not dispose of batteries in fire as they may leak or explode.
NOTE: The voltage of a fully-charged, rechargeable battery is often lower than that of a fresh alkaline
battery. Therefore, it is recommended that alkaline batteries be used instead of rechargeable
batteries for best performance and for longest play time.
• If the microphone’s transmission begins to weaken, replace the batteries.
• Under an environment with electrostatic discharge, this product may malfunction and require user
to reset the unit by changing the batteries.
5. Clip the Transmit Module to your belt or waistband.
6. Place the Headset on your head and adjust it to fit. (Fig. 2).
NOTE: This FM Wireless Microphone operates at approximately 100Mhz and will transmit your voice
and MP3 Player through any FM radio.
7. On the Transmit Module, turn the On/Off Switch to ON.
8. Turn on a nearby radio (not included) and select the FM band.
9. Tune your radio to 100MHz. If there is a radio station at 100MHz with a strong signal, it may
overpower your microphone. If so, move the tuner slightly to either side of 100 (99.9 or 100.1).
10. Hold your headset microphone close to the radio while your radio is tuned to about 100MHz
1. Attach your MP3 Player (not included) to the Holder on the side of the Transmit Module.
NOTE: If your MP3 Player does not fit in the holder, you can clip it to your belt or place it in a
pocket.
2. Attach the Audio Cable to the Headphone jack in your MP3 Player.
3. Attach the other end of the cable to the Audio Input Jack on the Transmit Module.
4. Plug the Headset cord into the Headphone Jack of the Transmit Module. Your Headset
Microphone and MP3 player should be connected as shown. (Fig. 1).
QUICK START
IMPORTANT NOTES
TROUBLESHOOTING
SAFE BATTERY USAGE
32
BEFORE YOU BEGIN
Get ready to sing along in style by first
installing batteries.
1. Using a Phillips screwdriver (not
included) remove the screw and
battery compartment cover from the
back of the Transmit Module.
2. Install two (2)1.5V AAA alkaline
batteries (not included) making sure
the (+) and (-) ends face the proper
direction as indicated inside the
battery compartment.
3. Replace the compartment cover and
tighten the screw.
Microphone
volume
decrease
MP3/audio in
volume
decrease
MP3/audio in
volume
increase
Microphone
volume
increase
MP3 Player
Fig. 1
Fig. 2
Fig. 3
1.5 V AAA/LR03
1.5 V AAA/LR03