MGA Entertainment 365488 Bratz Movie Theme Rock Star Headset (Transmitter) User Manual 360155 MS SigUCam IM

Download:
Mirror Download [FCC.gov]
Document ID	819812
Application ID	XdVddNkXBCzy1xfViS3ReA==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	58.8kB (734950 bits)
Date Submitted	2007-07-23 00:00:00
Date Available	2007-07-23 00:00:00
Creation Date	2007-05-14 10:59:23
Producing Software	Adobe PDF library 7.77
Document Lastmod	2007-05-14 10:59:48
Document Title	360155-MS SigUCam IM
Document Creator	Adobe Illustrator CS2

FCC STATEMENT
FCC Compliance
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Caution: Modifications not authorized by the manufacturer may void users authority to operate this
device.
AGES 4+
ADULT BATTERY INSTALLATION REQUIRED.
Item no. 365488
INTRODUCTION
Look and sound like a rock star with this awesome headset microphone! Just attach your MP3 player
to the transmit module and hook it to your belt. Both your MP3 player’s music and your voice will
come out through the radio together! Sing along with your fav MP3’s and belt it out like the pros!
CONTENTS
• 1 Bratz Movie Headset Boom Mic
• 1 Audio Cable
• 1 Microphone Transmit Module with the following parts:
a) MP3 Player Holder
b) On/Off Switch
c) Microphone Volume Dial
d) MP3 Player Volume Dial
e) Headphone Cord Jack
f) Audio Input Jack
g) Antenna
h) Belt Clip
NOTE: MP3 Player and FM radio
not included.
Headset in
‘Let’s care for the environment!’
The wheelie bin symbol indicates that the product must not be disposed of with other household
waste. Please use designated collection points or recycling facilities when disposing of the item.
Microphone
volume
decrease
Please keep this manual as it contains important information.
0507-0-E
www.bratz.com
TM & © MGA Entertainment, Inc.
BRATZ™, BRATZ PETZ™, LIL’ BRATZ™,
BRATZ BABYZ™, BRATZ KIDZ™ and all
related logos, names, characters,
distinctive likenesses and slogans,
as well as the packaging and images
appearing thereon, are the
exclusive property of MGA.
16300 Roscoe Blvd.
Van Nuys, CA 91406 USA
(800) 222-4685
Printed in China.
Microphone
volume
increase
MP3/audio in
volume
increase
MP3/audio in
volume
decrease
The preferred method of contact for
Customer Service is through our e-mail
contact form at www.mgae.com
On/Off Switch
Front
MP3/audio in
Bottom
BEFORE YOU BEGIN
Get ready to sing along in style by first
installing batteries.
1. Using a Phillips screwdriver (not
included) remove the screw and
battery compartment cover from the
back of the Transmit Module.
2. Install two (2)1.5V AAA alkaline
batteries (not included) making sure
the (+) and (-) ends face the proper
direction as indicated inside the
battery compartment.
3. Replace the compartment cover and
tighten the screw.
1.5
1.5
VA
AA
VA
AA
/LR
03
/LR
03
QUICK START
1. Attach your MP3 Player (not included) to the Holder on the side of the Transmit Module.
NOTE: If your MP3 Player does not fit in the holder, you can clip it to your belt or place it in a
pocket.
2. Attach the Audio Cable to the Headphone jack in your MP3 Player.
3. Attach the other end of the cable to the Audio Input Jack on the Transmit Module.
4. Plug the Headset cord into the Headphone Jack of the Transmit Module. Your Headset
Microphone and MP3 player should be connected as shown. (Fig. 1).
NOTE: This FM Wireless Microphone operates at approximately 100Mhz and will transmit your voice
and MP3 Player through any FM radio.
7. On the Transmit Module, turn the On/Off Switch to ON.
8. Turn on a nearby radio (not included) and select the FM band.
9. Tune your radio to 100MHz. If there is a radio station at 100MHz with a strong signal, it may
overpower your microphone. If so, move the tuner slightly to either side of 100 (99.9 or 100.1).
10. Hold your headset microphone close to the radio while your radio is tuned to about 100MHz
11. Turn On your MP3 Player and play your
favorite music track. You will hear it through
the radio!
12. Talk through your headset microphone and
your voice will also come through the radio!
13. Turn the Microphone Volume Dial clockwise
and the MP3/Audio In volume
counter-clockwise until both are at a
Microphone
Microphone
volume
comfortable listening level. (Fig. 3).
volume
decrease
increase
14. Now you can sing into your microphone and
you will hear your voice through the radio
MP3/audio in
MP3/audio in
volume
volume
along with music from your MP3 Player!
increase
decrease
Rock on!
Fig. 3
IMPORTANT NOTES
MP3 Player
• Your FM Microphone has been fully tested and adjusted prior to shipment. Do not attempt to
touch, replace or service any of components inside.
• After use, turn your microphone OFF to save the batteries.
TROUBLESHOOTING
• If the microphone’s transmission begins to weaken, replace the batteries.
• Under an environment with electrostatic discharge, this product may malfunction and require user
to reset the unit by changing the batteries.
SAFE BATTERY USAGE
Fig. 1
5. Clip the Transmit Module to your belt or waistband.
6. Place the Headset on your head and adjust it to fit. (Fig. 2).
• Use alkaline batteries for best performance and longer life
• Use only the type battery recommended for the unit.
• Batteries should be replaced only by an adult.
• Insert batteries with the correct polarity ( + and – ).
• Do not mix different types of batteries or old and new batteries.
• Do not short-circuit batteries.
• When not used for an extended time, remove batteries to prevent possible
leakage and damage to the unit.
• Do not mix rechargeable and non-rechargeable batteries.
• Rechargeable batteries are to be removed from the toy before charging.
• Rechargeable batteries are to be recharged only under adult supervision.
• Do not recharge non-rechargeable batteries.
• Exhausted batteries are to be removed from the toy.
• Do not dispose of batteries in fire as they may leak or explode.
NOTE: The voltage of a fully-charged, rechargeable battery is often lower than that of a fresh alkaline
battery. Therefore, it is recommended that alkaline batteries be used instead of rechargeable
batteries for best performance and for longest play time.
Fig. 2

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Format                          : application/pdf
Title                           : 360155-MS SigUCam IM
Creator Tool                    : Adobe Illustrator CS2
Create Date                     : 2007:05:14 10:59:23+08:00
Modify Date                     : 2007:05:14 10:59:48+08:00
Metadata Date                   : 2007:05:14 10:59:48+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 192
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 13515 bytes, use -b option to extract)
Document ID                     : uuid:76AF16CD039011DC9AD4F4A6118F282F
Instance ID                     : uuid:2d9bde2b-01c7-11dc-b4c8-000d937a4008
Derived From Instance ID        : uuid:c870f5b0-fc41-11db-9e77-000d937a4008
Derived From Document ID        : uuid:49A3BC4DFBE911DBA90BBBCD871836F9
Producer                        : Adobe PDF library 7.77
Page Count                      : 2
Creator                         : Adobe Illustrator CS2

EXIF Metadata provided by EXIF.tools