MGA Entertainment 643651C Constructn Learn Smart Workbench User Manual
MGA Entertainment (HK) Ltd. Constructn Learn Smart Workbench
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3495807 |
| Application ID | gW+xjOpQrHyJvzbvJVsdnA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 57.49kB (718607 bits) |
| Date Submitted | 2017-08-04 00:00:00 |
| Date Available | 2017-08-04 00:00:00 |
| Creation Date | 2017-07-13 14:38:37 |
| Producing Software | Adobe PDF library 10.01 |
| Document Lastmod | 2017-08-01 11:42:55 |
| Document Title | 643651C LT Construct'nLearn SmartWorkbench_IM_ENG_R1 |
| Document Creator | Adobe Illustrator CS6 (Macintosh) |
ENG 3+ YEARS ADULT SUPERVISION AND BATTERY INSTALLATION REQUIRED 643651C The Construct ‘n Learn Smart Workbench™ will launch and run on all Android devices 4.3 or higher and all Apple devices running iOS 7 and above. Devices must support Bluetooth LE for the app to sync with the workbench. For a complete list of compatible devices, please visit littletikes.com/smartworkbench Download the Smart Workbench app using the QR code here, or by visiting littletikes.com/smartworkbench WARNING Please keep this manual as it contains important information. 0717-1-C © The Little Tikes Company, an MGA Entertainment company. LITTLE TIKES® is a trademark of Little Tikes in the U.S. and other countries. All logos, names, characters, likenesses, images, slogans, and packaging appearance are the property of Little Tikes. Little Tikes Consumer Service 2180 Barlow Road Hudson, Ohio 44236 U.S.A. 1-800-321-0183 Printed in China MGA Entertainment UK Ltd 50 Presley Way Crownhill Milton Keynes MK8 0ES Bucks, UK 0800 521 558 www.littletikes.com www.littletikes.co.uk Visit our website at www.littletikes.com to register your product and to enter our sweepstakes. (No purchase necessary) • ADULT ASSEMBLY REQUIRED • Keep these instructions for future reference. • Keep long hair and loose apparel away from the rotating drill bit. • Prior to assembly, this package contains small parts: hardware which is a choking hazard and may contain sharp edges and sharp points. Keep away from children until assembled. • This product is intended for indoor family use only. • This product is indented for use by children ages 3 years and up. • Do not allow children to sit, stand, play or climb on the top surface. Failure to do so may cause the product to become unstable. • IMPORTANT: DO NOT immerse RFID chip items in water. Wash with a damp cloth only. • Electronic devices to be installed and removed by an adult only. CONTENTS IMPORTANT INFORMATION ADULT ASSEMBLY REQUIRED • Please save sales receipt for proof of purchase. • Clean the unit with a slightly damp cloth (cold water) and mild soap if necessary. • Real tools are not recommended for use with this unit or accessories. • Do not apply ruler sticker to anything other than the work surface, as it may not be removed. • Always turn the work surface and drill OFF after use to conserve battery power. • NOTE: If the unit stops working or doesn’t work as it should, remove the batteries for a few minutes and then re-insert them. If there is still a problem, install new batteries. • DISPOSAL: Disassemble and dispose of equipment in such a manner that no hazardous conditions such as, but not limited to, small parts and sharp edges exist at the time the equipment is discarded. LIMITED WARRANTY The Little Tikes Company makes fun, high quality toys. We warrant to the original purchaser that this product is free of defects in materials or workmanship for one year * from the date of purchase (dated sales receipt is required for proof of purchase). At the sole election of The Little Tikes Company, the only remedies available under this warranty will be the replacement of the defective part or replacement of the product. This warranty is valid only if the product has been assembled and maintained per the instructions. This warranty does not cover abuse, accident, cosmetic issues such as fading or scratches from normal wear, or any other cause not arising from defects in material and workmanship. *The warranty period is three (3) months for daycare or commercial purchasers. U.S.A and Canada: For warranty service or replacement part information, please visit our website at www.littletikes.com, call 1-800-321-0183 or write to: Consumer Service, The Little Tikes Company, 2180 Barlow Road, Hudson OH 44236, U.S.A. Some replacement parts may be available for purchase after warranty expires—contact us for details. Outside U.S.A and Canada: Contact place of purchase for warranty service. This warranty gives you specific legal rights, and you may also have other rights, which vary from country/state to country/state. Some countries/states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. BATTERY SAFETY INFORMATION NOT INCLUDED • Use only size “AA” (LR6) alkaline batteries (4 required) and “AAA” (LR03) alkaline batteries (3 required). • Charging of rechargeable batteries should only be done under adult supervision. • Remove rechargeable batteries from the product before recharging. • Do not mix old and new batteries. • Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries. • Be sure to insert the batteries correctly and follow the toy and battery manufacturer’s instruction. • Always remove exhausted or dead batteries from the product. • Dispose of dead batteries properly: do not burn or bury them. • Do not attempt to recharge non-rechargeable batteries. • Avoid short-circuiting battery terminals. • Remove batteries before placing the unit into storage for a prolonged period of time. FCC COMPLIANCE RFID Chip NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Modifications not authorized by the manufacturer may void users authority to operate this device. CAN ICES-3 (B)/NMB-3(B). ‘Let’s care for the environment!’ The wheelie bin symbol indicates that the product must not be disposed of with other household waste. Please use designated collection points or recycling facilities when disposing of the item. Do not treat old batteries as household waste. Take them to a designated recycling facility. Accessories with the symbol contain a RFID chip and interact with the app. DO NOT immerse RFID chip items in water. Wash with a damp cloth only. USAGE AND FEATURES CONTINUED BATTERY INSTALLATION Tabletop An adult must install fresh alkaline batteries (not included) in the Workbench prior to playing. Here’s how: 1. Using a Phillips screwdriver (not included) remove the screw and battery compartment cover from the top of the work surface. 2. Install four (4) 1.5V AA (LR6) alkaline batteries (not included) making sure the (+) and (-) ends face the proper direction as indicated inside the battery compartment. 3. Replace the compartment cover and tighten the screw. NOTE: The included toy screwdrivers will not open or close the battery compartment. The center of the work surface rotates to help you easily install vehicle parts. 1.5V AA/LR6 1.5V AA/LR6 1.5V AA/LR6 1.5V AA/LR6 4 x AA Batteries The chassis holder can be folded down to create a flat work surface. 10 CHASSIS Drill An adult must install fresh alkaline batteries (not included) in the drill prior to playing. Here’s how: 1. Using a Phillips screwdriver (not included) remove the screw and battery compartment cover from under the drill. 2. Install three (3) 1.5V AAA (LR03) alkaline batteries (not included) making sure the (+) and (-) ends face the proper direction as indicated inside the battery compartment. 3. Replace the compartment cover and tighten the screw. NOTE: The included toy screwdrivers will not open or close the battery compartment. Use the included blueprints to build your vehicle. The chassis will always be the base of each vehicle. The arrows on the chassis and the chassis holder should face the left. Vehicle parts are interchangeable and can be assembled with most of the included tools. 11 The Construct ‘n Learn Smart Workbench™ will launch and run on all Android devices 4.3 or higher and all Apple devices running iOS 7 and above. Devices must support Bluetooth LE for the app to sync with the Workbench. For a complete list of compatible devices, please visit littletikes.com/smartworkbench 1. Get Started! Insert your mobile device and slide the support bracket up and down so that it fits securely to the top of the device. Flip the locking clip upwards to secure. App Play GENERAL TROUBLESHOOTING Remember to sync the Workbench with the app before every use, and keep your device near the Workbench as you play! Download the Smart Workbench app to your tablet or mobile device by scanning the QR code, or by visiting littletikes.com/smartworkbench 643651C Home Screen Choose your Activity Workbench does not turn on or does not respond · Make sure batteries are correctly installed. · Remove batteries and put them back in. · Install new batteries. · Keep your device near the Workbench during play Workbench behaves erratically · Remove batteries and put them back in. · Install new batteries. App is not syncing or screen freezes · Close out of app. · Turn Workbench off, then on, and reconnect with app. App not recognizing an object · Check that it is an item with a RFID chip. · Be sure the item is placed correctly on the Workbench. iOS TROUBLESHOOTING Device must support Bluetooth 4.0 (LE) technology in order to connect to the unit. IMPORTANT: Make sure your device is fully charged and has a working Internet connection. Be sure your Workbench has a fresh set of batteries. How to Connect Toggles music ON/OFF 2. To sync the workbench with the app: Fig. 2 Proceed Trophies Free Play Turn on your device. · Be sure that the device’s Bluetooth feature is turned on. · Launch the Construct ‘n Learn Smart Workbench™ app. The “connecting” screen appears while connecting to the Workbench (Fig. 1). · Press the “Connect” button located on the work surface. A green LED will flash while it is searching for your device (Fig. 2). · When connecting screen disappears and the green LED remains solid, you’re connected! NOTE: If you’re having trouble connecting, select “More Help” for troubleshooting tips (Fig. 3). Fig. 1 Home As kids engage in traditional role-play, the app recognizes and responds to the items they are using with fun animation, encouraging phrases and interesting facts. Blueprints Fig. 3 Follow the on-screen instructions to build your vehicles with the included tools and parts! PRESS 3. Update the firmware on your workbench: Fig. 5 3 x AAA Batteries 1.5V AAA/LR03 • Ensure device’s Bluetooth is enabled and broadcasting. *See your device’s user manual for instructions. • Try turning both device and Workbench off and on completely. • Ensure your device has the most current supported operating system. • Remember to press and hold the green “Connect” button on the Workbench until the LED begins flashing. • Make sure your device and Workbench are close to each other. 1.5V AAA/LR03 ANDROID TROUBLESHOOTING IMPORTANT: Do not turn off the workbench or close the app during the update process. Device must support Bluetooth 4.0 (LE) technology in order to connect to the unit. · Once connected, the app will automatically search for a firmware update. · If the app does not find an update, it will proceed to the home screen. · If the app finds an available update, it will promp you to “update” or do so at a later time (Fig. 4). · Tap “Update” to download to your device. · An “Updating” progress bar will appear to indicate the update status. This may take a few minutes (Fig. 5). · Once the update is complete, turn off the Workbench and then turn it back on and re-connect with the app (Fig. 6). Fig. 4 Tips for Connecting 1. On your iOS device, go to Settings > Bluetooth and make sure Bluetooth is turned on. If you can’t turn on Bluetooth or you see a spinning gear, restart your device. Once the device has restarted: 2. Turn on the Workbench. 3. Launch the app on your device. 4. Press and hold the “Connect” button for about three seconds. * The green LED next to the button should begin blinking. 5. Tap on “Connect to Workbench” on your device. 6. Allow up to 30 seconds for connection to be established. How to Connect 1. Tap the “apps” icon on your Android device’s home screen. 2. Tap on the Settings icon. 3. Scroll down to Application Manager from the Application section. 4. Display “All” tab by swiping left or right. 5. Tap on Bluetooth. 6. Tap FORCE STOP button. 7. Tap CLEAR DATA. Tips for Connecting • Ensure device’s Bluetooth is enabled and broadcasting.*See your device’s user manual for instructions. • Try turning both device and Workbench off and on completely. • Ensure your device has the most current supported operating system. • Remember to press and hold the green “Connect” button on the Workbench until the LED begins flashing. • Make sure your device and Workbench are close to each other. Fix-It Fast! Learn how to fix various items by selecting the tool you would need to repair it! There are two play modes: beginner and advanced. Fig. 6 BEGINNER Tool Trivia Can you tell the difference between all of the tools in your tool box? Select beginner or advanced mode according to your skill level. ADVANCED 1.5V AAA/LR03 See the enclosed Parent Guide & Instructions for Workbench usage. ASSEMBLY USAGE AND FEATURES Please follow instructions carefully. Once assembled, some parts may not be removed. ADULT ASSEMBLY REQUIRED SNAP SLOPE Position the base so that it slopes forward. Slide the back legs (B) upward through the back of the base (A) until they snap into place. Slide the front legs (C) upward through the front of the base (A) until they snap into place. Attach two hooks to the top of the backboard to hang the blueprints. Arrange the blueprints so that they follow the correct assembly order. Attach the hooks onto the front legs (C) and the backboard (E) to store your tools. Insert the curved end of the hook first. Then, press the straight peg down to secure the hooks. SNAP Snap the front of the work surface (D) onto the front legs (C). Place the ruler sticker (H) on the front of the work surface (D). Once the front of the work surface (D) is assembled, slide it over the posts on the back legs (B) until they snap into place. Gx6 SNAP Move the switch on the drill up or down to choose the spinning direction of the bit. Then, press the trigger button to make the drill bit spin! Change the drill bits by gently pulling one bit out of the drill and pushing another into the drill until it clicks into place. REAR VIEW Align the posts on the bottom of the backboard (E) with the openings on the back legs (B). Then, press the backboard down to snap it in place. Snap the backboard (E) into the work surface (D). Then, attach the device holder (F) to the backboard (E) with six screws (G). Move the switch on the work surface to low or high volume. O = Off = Low Volume = High Volume Place the RFID chipped tools onto the right side of the work surface (F) in the “tool tray” to hear tool sounds.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2017:07:13 14:38:37+08:00 Creator : Adobe Illustrator CS6 (Macintosh) Modify Date : 2017:08:01 11:42:55+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Title : 643651C LT Construct'nLearn SmartWorkbench_IM_ENG_R1 Metadata Date : 2017:08:01 11:42:55+08:00 Creator Tool : Adobe Illustrator CS6 (Macintosh) Thumbnail Width : 256 Thumbnail Height : 180 Thumbnail Format : JPEG Thumbnail Image : (Binary data 20126 bytes, use -b option to extract) Instance ID : uuid:01686668-3536-44c9-a66b-8b7e445e103a Document ID : xmp.did:10EC82712920681180838AC27E591FF3 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:0FEC82712920681180838AC27E591FF3 Derived From Document ID : xmp.did:0FEC82712920681180838AC27E591FF3 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : default History Action : saved, saved History Instance ID : xmp.iid:99142B608B39E71191DEE4905FFBFC58, xmp.iid:10EC82712920681180838AC27E591FF3 History When : 2017:05:15 09:27:23-07:00, 2017:07:13 14:38:26+08:00 History Software Agent : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Macintosh) History Changed : /, / Startup Profile : Print Has Visible Overprint : True Has Visible Transparency : True N Pages : 1 Max Page Size W : 16.535414 Max Page Size H : 11.692919 Max Page Size Unit : Inches Font Name : VAGRounded-Black, Myriad-Roman, Myriad-Bold, MyriadPro-Regular, MyriadPro-It, MyriadPro-Bold, Helvetica, VAGRound, MyriadPro-Black Font Family : VAG Rounded, Myriad, Myriad, Myriad Pro, Myriad Pro, Myriad Pro, Helvetica, VAGRound, Myriad Pro Font Face : Black, Roman, Bold, Regular, Italic, Bold, Regular, Black Font Type : Type 1, Type 1, Type 1, Open Type, Open Type, Open Type, TrueType, Unknown, Open Type Font Version : 001.000, 001.001, 001.001, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, 12.0d1e3, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.006;PS 002.000;Core 1.0.38;makeotf.lib1.6.6565 Font Composite : False, False, False, False, False, False, False, False, False Font File Name : VAGRouBla; VAG Rounded SC, MyriaRom; Myriad, MyriaBol; Myriad, MyriadPro-Regular.otf, MyriadPro-It.otf, MyriadPro-Bold.otf, Helvetica.dfont, MyriadPro-Regular.otf, MyriadPro-Black.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Colorants Tint : 100.000000 Swatch Groups Colorants L : 49.803898 Swatch Groups Colorants A : 69 Swatch Groups Colorants B : 55 Swatch Groups Group Name : Brights Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000004 Swatch Groups Colorants Magenta : 90.000000 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Producer : Adobe PDF library 10.01 Trapped : False Nrpages : 1 Startlogpage : 1 Units : mm Vsize : 297 Hsize : 420 Margtop : 0 Margbot : 0 Margleft : 0 Margright : 0 Vshrink : 1.000000 Hshrink : 1.000000 Readerspread : False Screenreg : False Inks Name : cyan Inks Type : process Inks Book : process Inks Egname : cyan Inks Frequency : 120 Inks Angle : 22.5 Inks R : 0 Inks G : 0.680969238 Inks B : 0.938095093 Inks Attribute : normal Inks Printingmethod : unknown Layers Name : Layer 1 Layers Printable : True Layers Locked : False Pagelist Start : 0 Pagelist End : 0 Pagelist Inks : 1, 2, 3, 4 Fonts Name : VAGRounded-Black Fonts Type : Type 1 Fonts Location : local Fonts Protection : False Slug Family : Myriad Pro Slug Version : 2.006 Slug Outline File Size : 0 Slug Kerning Checksum : 0 Slug Foundry : Adobe Systems Slug Font Kind : OpenType - PS Slug Checksum : 2744686358 Slug Font Sense 12 Checksum : 2744686358 Slug Post Script Name : Myriad-Bold Page Count : 4EXIF Metadata provided by EXIF.tools