MINEW TECHNOLOGIES I3 Digital Broadcasting Device (iBeacon) User Manual i3 MiniBeacon Datasheet 1 2en
Shenzhen Minew Technologies Co.,Ltd. Digital Broadcasting Device (iBeacon) i3 MiniBeacon Datasheet 1 2en
User Manual
Shenzhen Minew Technologies Co.,Ltd. i3 MiniBeacon Datasheet V1.2 Description The MiniBeacon i3 is developed and produced including hardware and firmware all by MINEW Technologies. i3 is designed on CC2540/CC2541 BLE 4.0 core chipset with high performance on board antenna, the max. advertising range is 180 meters in the open space. Moreover, i3 has packed 2pcs AA batteries, the battery lifetime has 5 years. About MiniBeacon ‐ Built‐in MiniBeacon firmware ‐ Built‐in 2pcs AA batteries, 5 years lifetime ‐ Bluetooth low energy technology compatible ‐ Excellent link budget (up to 97dB) ‐ The max. 180 meters advertising distance ‐ Accurate digital RSSI ‐ High performance and low power 8051 core MCU ‐ AES security coprocessor Image 1 Certifications ‐ iBeacon License ‐ FCC Regulation (FCC Part 15C) ‐ CE Regulations (Included EN300328, EN301489, EN60950, EN62479) Feature & Advantage ‐ Application for advertisement and proximity location ‐ Supports both iOS 7.0+ and Android 4.3+ system ‐ Built‐in pairing password to prevent others changing the settings ‐ MiniBeacon name, UUID, Major, Minor values and broadcasting interval can be changed by customer ‐ Battery capacity intelligent detecting and notification feature ‐ Supports soft reboot function, no longer required to take out the battery to reboot the device ‐ MiniBeacon serial ID can be customized, it will help customer to easily distinguish which one is which ‐ Placed a power button on the board used to activate / shutdown beacon device ‐ Supports the connectable and non‐connectable broadcasting mode ‐ Supports the OAD function ‐ Publishes the free upgraded firmware regularly ‐ Built‐in JTAG port for other customized application firmware as a standalone system ‐ The customer’s logo can be printed on the housing if required ‐ Customized housing and firmware services will be welcomed TEL: +86-755-8886 8480 FAX: +86-755-2982 5342 EMAIL: sales@minewtech.com URL: www.minewtech.com Page 2 Shenzhen Minew Technologies Co.,Ltd. i3 MiniBeacon Datasheet V1.2 Operation Instructions 1. Activate MiniBeacon as below method before using device 1.1 Use the tool to open the case, take out the module and found out the BUTTON (Image 2); 1.2 Press the BUTTON and keep holding 5 seconds, the Blue LED will Light on 5 seconds and then off; it means that MiniBeacon was wakening up and starts to broadcasting. 2. Shutdown MiniBeacon as below method 2.1 Use the tool to open the case, take out the module; 2.2 Press the BUTTON and keep holding 5 seconds, the Blue LED will flash 5 times and then off; it means that MiniBeacon was on sleeping mode and stop broadcasting. Low Battery Indication If the battery level lower than 2.3V, the Red LED will flash a time every 5 seconds; MiniBeacon will stop broadcasting automatically once the battery level lower to 2.1 volts. (Image 3) Image 2 Image 3 Default Setting Parameters 0xFFF1 0xFFF2 0xFFF3 0xFFF4 0xFFF5 0xFFF6 0xFFF7 0xFFF8 0xFFFE 0xFFFF 0x180F TEL: +86-755-8886 8480 Item Proximity UUID Major Minor Default Value E2C56DB5‐DFFB‐48D2‐B060‐D0F5A71096E0 0x0000 0x0000 Measured Power Transmission Power Pairing Password Broadcasting interval Beacon Serial ID Connection Mode Soft Reboot Battery Service 0xC5 0x00 (0dBm) 0x0F0FF3 (the corresponding decimal is 987123) 0x03(300mS) Random (Unique serial ID for beacon) 0x00 (connectable mode) 0x0F0FF3 (the corresponding decimal is 987123) 0x64 (100% full capacity of battery) FAX: +86-755-2982 5342 EMAIL: sales@minewtech.com URL: www.minewtech.com Page 3 Federal Communications Commission (FCC) Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ●Reorient or relocate the receiving antenna. ●Increase the separation between the equipment and receiver. ●Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ●Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications made to this device not expressly approved by Shenzhen Minew Technologies Co., Ltd. may void the FCC authorization to operate this device. Note: The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : 3.1-701 Format : application/pdf Title : Microsoft Word - i3_MiniBeacon Datasheet_1.2en Creator : lenovo Create Date : 2014:12:11 14:31:27+08:00 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2014:12:25 17:57:50+08:00 Metadata Date : 2014:12:25 17:57:50+08:00 Producer : Acrobat Distiller 10.1.0 (Windows) Document ID : uuid:77045ccc-90ea-4fed-b85d-03403e280b67 Instance ID : uuid:fc2f380f-051c-4a4e-a8db-5baf67c18c9e Has XFA : No Page Count : 3 Author : lenovoEXIF Metadata provided by EXIF.tools