MINEW TECHNOLOGIES MS50SF3 BLE module User Manual
SHENZHEN MINEW TECHNOLOGIES CO., LTD. BLE module
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3401767 |
| Application ID | 0hDUGetaI92leM3pyOkZoQ== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 50kB (625043 bits) |
| Date Submitted | 2017-05-24 00:00:00 |
| Date Available | 2017-05-24 00:00:00 |
| Creation Date | 2017-05-12 13:54:19 |
| Producing Software | Microsoft? Office Word 2007 |
| Document Lastmod | 2017-05-16 11:31:38 |
| Document Title | 承认书 |
| Document Creator | Microsoft? Office Word 2007 |
| Document Author: | * |
产 品 规 格 书 PRODUCT SPECIFICATION SHENZHEN MINEW TECHNOLOGIES CO LTD MODEL NO/DESCRIPTION PRODUCT NAME: BLUETOOTH MODULE MS50SF3 Model:MS50SF3 Version 2.2 Released Date 2017-5-4 Minew Technologies 1.Description MS50SF3 is designed using Nordic nRF52832 patch Bluetooth 4.2 module. It is a cost-effective, low-power system-on-a-chip (Soc) solution for Bluetooth low-power applications that reduces the cost of building network nodes. It has an ARM core Cortex-M4F RF transceiver, MCU has faster speed, the kernel running speed of 64MHz, it can achieve more powerful computing power and floating-point computing technology, can achieve very complex algorithm. 512KB FLASH program space, 64KB RAM and other powerful supporting resources. It is suitable for low-power systems, ultra-low sleep current and low power consumption during operation. Front URL：www.minewtech.com Back Tel：0755-88868480 Email: sales@minewtech.com Minew Technologies 2. Features Bluetooth low power compatible technology Support for remote applications Accurate Received Signal Intensity Detection (RSSI) Complies with CE (European) and FCC (US) certification standards Contains high-performance ARM Cortex-M4F with AES security protocol processor 3. Application areas - Low power Bluetooth system - Mobile accessories - Sports and fitness equipment - Consumer electronics - Human interface device - health and medical care 4. Mechanical size (Unit: mm) URL：www.minewtech.com Tel：0755-88868480 Email: sales@minewtech.com Minew Technologies 5. Pin definition Pin symbol Pin type Definition VDD Power Power supply DCC Power DC/DC converter output pin GND Power Ground 1V3 regulator supply decoupling. DEC4 Power Input from DC/DC converter. Output from 1.3 V LDO SWDIO Digital I/O Hardware debug and flash programming I/O SWCLK Digital input Hardware debug and flash programming I/O Digital I/O General purpose I/O pin XL2 Analog output Connection for 32.768 kHz crystal XL1 Analog input Connection for 32.768 kHz crystal or external 32.768 kHz NFC1 NFC input NFC antenna connection NFC2 NFC input NFC antenna connection RESET Digital input Configurable as system RESET pin P0.00 to P0.31 URL：www.minewtech.com Tel：0755-88868480 Email: sales@minewtech.com Minew Technologies 6. Electrical parameters Parameters Value Remarks Voltage 1.8-3.6V DC Frequency 2400-2483MHz Programmable Frequency error +/- 20KHz Null Transmission power -20 ~ +4dBm Programmable Receiving sensitivity -96dBm High gain mode Receive current 5.4mA RX only run current(DCDC, 3V) 1Msps Transmission power +4dBm， 7.5mA Transmission current RX only run current(DCDC, 3V) 1Msps 5.3mA Transmission power 0dBm Standby power consumption ＜1uA Power mode 3, connection-less Remote control distance 50 meters state BER<0.1%, Open space Antenna 50ohm Null Module size 18*10*2mm Null 7. Supported devices Supported the device Supported device model system iOS 7.0 and above iPhone 4S,iPhone 5, iPhone 5S,iphone 6, iPhone 6p,iPad 3, iPad mini, iPad air etc Android 4.3 and above Huawei, Xiaomi, OPPO, Meizu, VIVO, Samsung Galaxy S III, HTC One and etc. URL：www.minewtech.com Tel：0755-88868480 Email: sales@minewtech.com Minew Technologies 8. Reference Circuit Module’s default is using internal DC-DC mode. 9. Quality assurance Factories passed the ISO9001 quality system certification. Each product has been rigorously tested (transmit power test, sensitivity test, power test, stability test, aging test, etc.). URL：www.minewtech.com Tel：0755-88868480 Email: sales@minewtech.com Minew Technologies 10. Note 1, the chip has CMOS devices, in the transport, the use of the process should pay attention to anti-static. 2, the device should be grounded to reduce the parasitic inductance. 3, as far as possible manual welding, for machine stickers, please control the reflow temperature should not exceed 205 degrees Celsius. 4, the module antenna below do not shop copper. 5, the antenna should be away from other circuits, to prevent radiation efficiency becomes low and affect the normal use of other circuits. 6, the module should be placed away from other low-frequency circuits, digital circuits. 7, the module's access power is recommended to use magnetic beads for isolation. Statement：The contents of this manual are for reference only and are subject to change without notice. Minew technology has the final interpretation of the contents for this manual. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. 15.105 Information to the user. (b) For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. URL：www.minewtech.com Tel：0755-88868480 Email: sales@minewtech.com WIFI Video module GX_W60_Specification These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncont rolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. The final end product must be labelled in a visible area with the following: “Contains Transmitter Module 2ABU6-MS50SF3” In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization Tel：86-755-26066032 Fax:26002892 Web site：www.netopsun.com 8/8
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Tagged PDF : No XMP Toolkit : 3.1-702 Create Date : 2017:05:12 13:54:19+08:00 Creator Tool : Microsoft? Office Word 2007 Modify Date : 2017:05:16 11:31:38+08:00 Metadata Date : 2017:05:16 11:31:38+08:00 Format : application/pdf Creator : * Title : 承认书 Producer : Microsoft? Office Word 2007 Document ID : uuid:138ca8ec-7633-433b-8f24-306f674c30f3 Instance ID : uuid:7d2ef8bd-8bd3-42fb-b6f3-f0811dde63b4 Has XFA : No Page Count : 8 Language : zh-CN Author : *EXIF Metadata provided by EXIF.tools