MOBASE ELECTRONICS DD4TX1306-TFL Folding Transmitter User Manual

Daedong Co. Ltd. Folding Transmitter

users manual

INFORMATION DOCUMENTRELATING TO CE TYPE-APPROVALOF VEHICLE RF REMOTE KEYLESS ENTRY IN ATAS SYSTEMAS SEPARATE TECHNICAL UNITDaeDong CO., LTD.- 2013.02.05 -
Title : NO. Date1. GENERAL1.1. MakeDaeDong Co.,Ltd.1.2. Model No.- Transmitter : DD4TX1306-TFL1.3. Name and address of manufacturerDaeDong Co.,Ltd.734-2, Wonshi-Dong, Ansan-Si, Kyonggi-Do, Korea.1.4. Address of assembly plantDaeDong Co.,Ltd.734-2, Wonshi-Dong, Ansan-Si, Kyonggi-Do, Korea.Information Document
Title : NO. Date2. PRODUCT SPECIFICATION2.1 TF F/L 4B Folding Transmitter 2.1.1 KEY PART : TRANSMITTER is inside of the REMOTE KEY, and it sends the ROLLING CODE to the RECEIVER by Radio Frequency. 2.2 SPECIFICATIONS2.2.1 TRANSMITTER Operating temperature range - 20 ~ + 60℃ with Battery Battery life 2 Year(10Times/Day)(Lithium 3V 1EA) Frequency 315MHz Modulation FSK - 40 ~ + 85℃ without Battery Storage temperature range Code Rolling Code(Hopping Algorithm)ITEMSPECIFICATIONRated supply voltage DC 3VOperating voltage range DC 2.5 ~ 3.2VInformation Document
Title : NO. Date2.3 Operating summary① TRANSMITTER's button is pushed.② TRANSMITTER sends the code by radio frequency.③ RECEIVER gets the code and decodes it.④ RECEIVER judges the code whether it is right code or not.⑤ RECEIVER checks door lock or unlock, trunk state.⑥ RECEIVER drives the actuator. 2.3.1 LOCK & UNLOCK ① If LOCK or UNLOCK button is pushed for less than 1 sec, then TRANSMITTER sends the LOCK or UNLOCK DATA.② If TRUNK button is pushed for more than 1 sec, then TRANSMITTER sends the TRUNK DATA.③ If PANIC button is pushed for more than 1 sec, then TRANSMITTER sends the PANIC DATA.2.4 Caution① Danger of explosion if battery is incorrectly replaced.② Replace only with the same or equivalent type recommended by the manufacturer. ③ Dispose of used batteries according to the manufacturer's instructions.Information Document
Title : NO. Date3. USER MANUAL3.1 NAME : BCM system- This system is BCM and inculdes RKE. - RKE in BCM system is intended for auto door lock or unlock or TRUNK in vehicle. - This BCM system is to be installde on motor vehicles as *OE item. *OE : Original Equipment. *BCM : Body Control Module. *RKE : Remote Keyless Entry.3.2 SYSTEM CONSTRUCTION3.2.1 SYSTEM IN VEHICLE3.2.2 SYSTEM FOR TEST * Through the use of lamp, operating state is displayed by lamp. lamp 'ON' means that actuator is operated by door lock or unlock or tail-gate output signal. Information DocumentANTENNAROLLING CODEANTENNARECEIVERBATTERYlampROLLING CODELOCK or UNLOCKor TRUNK DATABATTERYDOOR ACTUATORRECEIVER

Navigation menu