MOBASE ELECTRONICS DDBCM1307-SL BCM Receiver User Manual

Daedong Co. Ltd. BCM Receiver

User Manual

Information Document (5 sheets: including this sheet)Attachment 1 - System diagram (1 sheet)Attachment 2 - TRANSMITTER Diagram (1 sheet)Attachment 3 - Schematic of the Receiver (1 sheet)Attachment 4 - Layout of the Receiver (1 sheet)Attachment 5 - Part List (1 sheet)CONTENTS LISTINFORMATION DOCUMENT NO. DDBCM1307-SLRELATING TO CE TYPE-APPROVALOF VEHICLE RF REMOTE KEYLESS ENTRY IN BCM SYSTEMAS SEPARATE TECHNICAL UNITDAE DONG CO., LTD.- 2013.02.05 -
Title : NO. Date0. GENERAL0.1. MakeDAE DONG Co.,Ltd.0.2. Model No.: DDBCM1307-SL0.3. Name and address of manufacturerDAE DONG Co.,Ltd.424, Sinwon-ro, Wonsi-dong, Danwon-gu Ansan-si, Gyeonggi-do, Korea 0.4. Address of assembly plantDAE DONG Co.,Ltd.424, Sinwon-ro, Wonsi-dong, Danwon-gu Ansan-si, Gyeonggi-do, Korea Information Document
Title : NO. Date2. PRODUCT SPECIFICATION2.1 Remote Keyless Entry System2.1.1 KEY PART : TRANSMITTER is inside of the REMOTE KEY, and it sends the ROLLING CODE to the RECEIVER by Radio Frequency. 2.1.2 RECEIVER : It receives the ROLLING CODE and decodes that, thereafter RECEIVER drives the actuator.2.2 SPECIFICATIONS2.2.1 TRANSMITTER2.2.2 RECEIVER Rated Supply Voltage Below than 5.5mA Operating Temperature - 30 ~ + 80℃ Battery life 2 Year(10Times/Day)(Lithium 3V 1EA) Standby Current Electric field strength 10mW (315.00MHz)(in alarm setting condition)SpecificationItem DC 9 ~ 16V Operating Voltage DC 12VMax Humidity 95% Operating temperature range -20 ~+60℃ Frequency 315.00MHz Code Rolling Code(Hopping Algorithm) Storage temperature range -30 ~ 80℃ Modulation FSKITEMSPECIFICATIONRated supply voltage DC 3VOperating voltage range DC 2.5 ~ 3.2VInformation Information Document
Title : NO. Date2.3 Operating summary① TRANSMITTER's button is pushed.② TRANSMITTER sends the code by radio frequency.③ RECEIVER gets the code and decodes it.④ RECEIVER judges the code whether it is right code or not.⑤ RECEIVER checks door lock or unlock Tail-Gate state.⑥ RECEIVER drives the actuator. 2.3.1 LOCK & UNLOCK ① If LOCK or UNLOCK button is pushed for less than 1 sec, then TRANSMITTER sends the LOCK or UNLOCK DATA.② If TAIL-GATE button is pushed for more than 1 sec, then TRANSMITTER sends the TAIL-GATE DATA.2.4 Caution① Danger of explosion if battery is incorrectly replaced.② Replace only with the same or equivalent type recommended by the manufacturer. ③ Dispose of used batteries according to the manufacturer's instructions.Information DocumentInformation Document
Title : NO. Date3. USER MANUAL3.1 NAME : BCM system- This system is BCM and inculdes RKE. - RKE in BCM system is intended for auto door lock or unlock or TAIL-GATE in vehicle. - This BCM system is to be installde on motor vehicles as *OE item. *OE : Original Equipment. *BCM : Body Control Module. *RKE : Remote Keyless Entry.3.2 SYSTEM CONSTRUCTION3.2.1 SYSTEM IN VEHICLE3.2.2 SYSTEM FOR TEST * Through the use of lamp, operating state is displayed by lamp. lamp 'ON' means that actuator is operated by door lock or unlock or tail-gate output signal. Information DocumentInformation DocumentInformation DocumentInformation DocumentANTENNAROLLING CODE(315.00MHz)ANTENNARECEIVERBATTERYlampROLLING CODE(315.00MHz)LOCK or UNLOCK or TAIL-GATE DATABATTERYDOOR ACTUATORRECEIVER

Navigation menu