MOBASE ELECTRONICS SEKS-07RX Remote Keyless Entry System User Manual SEKS 007 Manual rev01

Daedong Co. Ltd. Remote Keyless Entry System SEKS 007 Manual rev01

Users Manual

  Title :  NO. : SCE-0406 Date : 25. JUN. 20040. GENERAL0.1. MakeShinchang Electrics Co.,Ltd.0.2. Model No. - Transmitter  : SEKS-07Tx- Receiver         : SEKS-07Rx0.3. Name and address of manufacturerShinchang Electrics Co.,Ltd.734-2, Wonshi-Dong, Ansan-Si, Kyonggi-Do, Korea.0.4. Address of assembly plantShinchang Electrics Co.,Ltd.734-2, Wonshi-Dong, Ansan-Si, Kyonggi-Do, Korea.Page 1 of 13NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TVINTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THISEQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TOOPERATE THE EQUIPMENT.This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may causeundesired operations.Information Document
  Title :  NO. : SCE-0406 Date : 25. JUN. 20041. PRODUCT SPECIFICATION1.1 Scope of Remote Keyless Entry in ETACS system.1.1.1 Key part : Transmitter is inside of the remote key, and it          sends the rolling code to the receiver by radio frequency. 1.1.2 Receiver : It receives the rolling code and decodes that,         thereafter receiver drives the actuator and horn.1.2 Specification1.2.1 Transmitter1.2.2 ReceiverPage 2 of 13 Storage temperature range  -30 ~ 80? Modulation FMItem SpecificationRated supply voltage  DC 3VOperating voltage range  DC 2.5 ~ 3.2V Operating temperature range  -20 ~+60? Electric field strength 0.01mW Frequency 433.92MHz Code  Rolling Code(Hopping Algorithm) - 30 ~ + 80?Max Humidity 95% Battery life  2 Year(Lithium 3V 1EA)Below than 6mA(in alarm setting condition) Standby Current  SpecificationItem DC 9 ~ 16V  Operating Voltage  DC 12V Rated  Supply Voltage    Operating Temperature Information DocumentInformation Document
  Title :  NO. : SCE-0406 Date : 25. JUN. 20042. USER MANUAL2.1 Name : ETACS system- This system is ETACS and includes RKE.- RKE in ETACS system is intended for auto door lock or unlock / panic in vehicle.- This ETACS system is to be installed on motor vehicles as *OE item.     * OE : Original Equipment.   * ETACS : Electronic Time & Alarm Control System.   * RKE : Remote Keyless Entry.2.2 System construction2.2.1 System in vehicle2.2.1 System for test   * Through the use of lamp, operating state is displayed by lamp.     lamp 'ON' means that actuator is operated by door lock or unlock / panic output signal. Page 3 of 13Information DocumentInformation DocumentInformation DocumentInformation DocumentANTENRECEIVERBATTERYDOOR ACTUATORROLLING ANTENNARECEIVERBATTERYDOOR ACTUATORROLLING CODEANTENNARECEIVERBATTERYLOCK or UNLOCK DATALEDROLLING CODE
  Title :  NO. : SCE-0406 Date : 25. JUN. 20042.3 Operating summary? Transmitter's button is pushed.? Transmitter sends the code by radio frequency.? Receiver gets the code and decodes it.? Receiver judges the code whether it is right code or not.? Receiver checks door lock or unlock / panic state.? Receiver drives the actuator.? Receiver drives the horn2.3.1 Lock & Unlock & PanicIf transmitter's button is pushed,       Transmitter sends the code.2.4 Caution? Danger of explosion if battery is incorrectly replaced.       ? Replace only with the same or equivalent type recommended by the manufacturer.? Dispose of used batteries according to the manufacturer's instructions.Page 4 of 5Information DocumentInformation Document
NO. PART NAME QT'Y REMARKS?ETACS 1?TRANSMITTER 1 Page 6 of 13  NAME       RKE SYSTEM IN ETACS  TITLE        SYSTEM DIAGRAM  SCALE      FREE433.92MHzLOCK & UNLOCK& PANIC BUTTON
Page 5 of 5SA ETACS LHD
SA ETACS RHD

Navigation menu