MOBASE ELECTRONICS SEKS-09TX Remote Keyless Entry System (TX) User Manual KM Etacs 315 FCC IC

Daedong Co. Ltd. Remote Keyless Entry System (TX) KM Etacs 315 FCC IC

Users Manual

Title : NO. : SCE-0504 Date : 15. APR. 20051. PRODUCT SPECIFICATION1.1 Scope of Remote Keyless Entry in ETACS system.1.1.1 Key part : Transmitter is inside of the remote key, and it sends the rolling code to the receiver by radio frequency. 1.1.2 Receiver : It receives the rolling code and decodes that, thereafter receiver drives the actuator and horn.1.2 Specification1.2.1 Transmitter1.2.2 ReceiverBelow than 6mA(in alarm setting condition) Standby Current SpecificationItem DC 9 ~ 16V Operating Voltage DC 12V Rated Supply Voltage Operating Temperature - 30 ~ + 80℃Max Humidity 95% Battery life 2 Year(Lithium 3V 1EA) Electric field strength 0.01mW Frequency 315MHz Code Rolling Code(Hopping Algorithm)Operating voltage range DC 2.5 ~ 3.2V Operating temperature range -20 ~+60℃Item SpecificationRated supply voltage DC 3V Storage temperature range -30 ~ 80℃ Modulation FMInformation DocumentInformation Document
Title : NO. : SCE-0504 Date : 15. APR. 20052. USER MANUAL2.1 Name : ETACS system- This system is ETACS and includes RKE.- RKE in ETACS system is intended for auto door lock or unlock / panic in vehicle.- This ETACS system is to be installed on motor vehicles as *OE item. * OE : Original Equipment. * ETACS : Electronic Time & Alarm Control System. * RKE : Remote Keyless Entry.2.2 System construction2.2.1 System in vehicle2.2.1 System for test * Through the use of lamp, operating state is displayed by lamp. lamp 'ON' means that actuator is operated by door lock or unlock / panic output signal. Information DocumentInformation DocumentInformation DocumentInformation DocumentANTENRECEIVERBATTERYDOORACTUATORROLLINGANTENNARECEIVERBATTERYDOORACTUATORROLLINGCODEANTENNARECEIVERBATTERYLOCK or UNLOCKDATALEDROLLINGCODE
Title : NO. : SCE-0504 Date : 15. APR. 20052.3 Operating summary① Transmitter's button is pushed.② Transmitter sends the code by radio frequency.③ Receiver gets the code and decodes it.④ Receiver judges the code whether it is right code or not.⑤ Receiver checks door lock or unlock / panic state.⑥ Receiver drives the actuator.⑦ Receiver drives the horn2.3.1 Lock & Unlock & PanicIf transmitter's button is pushed, Transmitter sends the code.2.4 Caution① Danger of explosion if battery is incorrectly replaced. ② Replace only with the same or equivalent type recommended by the manufacturer.③ Dispose of used batteries according to the manufacturer's instructions.Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Information DocumentInformation Document

Navigation menu