MOBASE ELECTRONICS SEKS-09TX Remote Keyless Entry System (TX) User Manual KM Etacs 315 FCC IC
Daedong Co. Ltd. Remote Keyless Entry System (TX) KM Etacs 315 FCC IC
Users Manual
Title : NO. : SCE-0504 Information Document Information Document Date : 15. APR. 2005 1. PRODUCT SPECIFICATION 1.1 Scope of Remote Keyless Entry in ETACS system. 1.1.1 Key part : Transmitter is inside of the remote key, and it sends the rolling code to the receiver by radio frequency. 1.1.2 Receiver : It receives the rolling code and decodes that, thereafter receiver drives the actuator and horn. 1.2 Specification 1.2.1 Transmitter 1.2.2 Item Specification Rated supply voltage DC 3V Operating voltage range DC 2.5 ~ 3.2V Operating temperature range -20 ~+60℃ Storage temperature range -30 ~ 80℃ Modulation FM Frequency 315MHz Code Rolling Code(Hopping Algorithm) Electric field strength 0.01mW Battery life 2 Year(Lithium 3V 1EA) Item Specification Rated Supply Voltage DC 12V Operating Voltage DC 9 ~ 16V Operating Temperature - 30 ~ + 80℃ Max Humidity 95% Receiver Standby Current Below than 6mA (in alarm setting condition) Title : NO. : SCE-0504 Information Information Document Document Information Document Date : 15. APR. 2005 2. USER MANUAL 2.1 Name : ETACS system - This system is ETACS and includes RKE. - RKE in ETACS system is intended for auto door lock or unlock / panic in vehicle. - This ETACS system is to be installed on motor vehicles as *OE item. * OE : Original Equipment. * ETACS : Electronic Time & Alarm Control System. * RKE : Remote Keyless Entry. 2.2 System construction 2.2.1 System in vehicle ROLLING CODE ANTEN ANTENNA BATTERY RECEIVER 2.2.1 DOOR ACTUATOR System for test ROLLING CODE ANTENNA BATTERY RECEIVER LOCK or UNLOCK DATA LED * Through the use of lamp, operating state is displayed by lamp. lamp 'ON' means that actuator is operated by door lock or unlock / panic output signal. Title : NO. : SCE-0504 Information Document Information Document Date : 15. APR. 2005 2.3 Operating summary ① Transmitter's button is pushed. ② Transmitter sends the code by radio frequency. ③ Receiver gets the code and decodes it. ④ Receiver judges the code whether it is right code or not. ⑤ Receiver checks door lock or unlock / panic state. ⑥ Receiver drives the actuator. ⑦ Receiver drives the horn 2.3.1 Lock & Unlock & Panic If transmitter's button is pushed, Transmitter sends the code. 2.4 Caution ① Danger of explosion if battery is incorrectly replaced. ② Replace only with the same or equivalent type recommended by the manufacturer. ③ Dispose of used batteries according to the manufacturer's instructions. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Creator Tool : PScript5.dll Version 5.2 Modify Date : 2005:04:21 18:03:05+09:00 Create Date : 2005:04:15 15:57:55+09:00 Metadata Date : 2005:04:21 18:03:05+09:00 Format : application/pdf Title : KM+Etacs_(315+FCC+IC).xls Creator : schong Document ID : uuid:97a55047-490d-4e4b-87ef-060857392bb3 Instance ID : uuid:7feaf093-2dc3-4750-b7a4-38dcee129718 Has XFA : No Page Count : 4 Author : schongEXIF Metadata provided by EXIF.tools