MOBASE ELECTRONICS SEKS-AMFLARX Remote Keyless Entry System User Manual NYO SEKS AMFLARX Manual

Daedong Co. Ltd. Remote Keyless Entry System NYO SEKS AMFLARX Manual

User manaul

0. GENERAL0.1. MakeShinchang Electrics Co.,Ltd.0.2. Model No.- Transmitter : SEKS-AM11ATx - Receiver : SEKS-AMFLARX0.3. Name and address of manufacturerShinchang Electrics Co.,Ltd.734-2, Wonshi-Dong, Ansan-Si, Kyonggi-Do, Korea.0.4. Address of assembly plantShinchang Electrics Co.,Ltd.734-2, Wonshi-Dong, Ansan-Si, Kyonggi-Do, Korea.
2. PRODUCT SPECIFICATION2.1 Remote Keyless Entry System2.1.1 KEY PART : TRANSMITTER is inside of the REMOTE KEY, and it sends the ROLLING CODE to the RECEIVER by Radio Frequency. 2.1.2 RECEIVER : It receives the ROLLING CODE and decodes that, thereafter RECEIVER drives the actuator.2.2 SPECIFICATIONS2.2.1 TRANSMITTER2.2.2 RECEIVERSpecificationItem DC 9 ~ 16V Operating Voltage DC 12V Rated Supply Voltage Below than 5.5mA Operating Temperature - 30 ~ + 80℃Max Humidity 95% Standby Current (in alarm setting condition) Battery life 2 Year(10Times/Day)(Lithium 3V 1EA) Electric field strength 10mW (433.92MHz) Frequency 315.00 MHz Code Rolling Code(Hopping Algorithm)Operating voltage range DC 2.5 ~ 3.2V Operating temperature range -20 ~+60℃ITEM SPECIFICATIONRated supply voltage DC 3V Storage temperature range -30 ~ 80℃ Modulation FSK
3. USER MANUAL3.1 NAME : BCM system- This system is BCM and inculdes RKE. - RKE in BCM system is intended for auto door lock or unlock or TAIL-GATE in vehicle- This BCM system is to be installde on motor vehicles as *OE item. *OE : Original Equipment. *BCM : Body Control Module. *RKE : Remote Keyless Entry.3.2 SYSTEM CONSTRUCTION3.2.1 SYSTEM IN VEHICLE3.2.2 SYSTEM FOR TEST * Through the use of lamp, operating state is displayed by lamp. lamp 'ON' means that actuator is operated by door lock or unlock or tail-gate output signal. ANTENNAROLLING CODE(315 MHz)ANTENNARECEIVERBATTERYlampROLLING CODE(315 MHz)LOCK or UNLOCK or TAIL-GATE DATABATTERYDOORACTUATORRECEIVER
2.3 Operating summary① TRANSMITTER's button is pushed.② TRANSMITTER sends the code by radio frequency.③ RECEIVER gets the code and decodes it.④ RECEIVER judges the code whether it is right code or not.⑤ RECEIVER checks door lock or unlock Tail-Gate state.⑥ RECEIVER drives the actuator. 2.3.1 LOCK & UNLOCK ① If LOCK or UNLOCK button is pushed for less than 1 sec, then TRANSMITTER sends the LOCK or UNLOCK DATA.② If TAIL-GATE button is pushed for more than 1 sec, then TRANSMITTER sends the TAIL-GATE DATA.2.4 Caution① Danger of explosion if battery is incorrectly replaced.② Replace only with the same or equivalent type recommended by the manufacturer. ③ Dispose of used batteries according to the manufacturer's instructions.
GGGGGGGGGGG"CAUTION: Exposure to Radio Frequency Radiation. Antenna shall be mounted in such a manner to minimize the potential for human contact during normal operation. The antenna should not be contacted during operation to avoid the possiblility of exceeding the FCC radio frequency exposure limit.

Navigation menu