MOBASE ELECTRONICS SEKS-SL13MYARX Low Power Communication Device User Manual REV

Daedong Co. Ltd. Low Power Communication Device REV

Users Manual

1. GENERAL1.1. MakeShinchang Electrics Co.,Ltd.1.2. Model No.- Receiver : SEKS-SL13MYARX1.3. Name and address of manufacturerShinchang Electrics Co.,Ltd.734-2, Wonshi-dong, Danwon-gu, Ansan-si, Kyungki-do, 425-090, Korea1.4. Address of assembly plantShinchang Electrics Co.,Ltd.734-2, Wonshi-dong, Danwon-gu, Ansan-si, Kyungki-do, 425-090, Korea
2. PRODUCT SPECIFICATION2.1 Remote Keyless Entry System2.1.1 KEY PART : TRANSMITTER is inside of the REMOTE KEY, and it sends the ROLLING CODE to the RECEIVER by Radio Frequency. 2.1.2 RECEIVER : It receives the ROLLING CODE and decodes that, thereafter RECEIVER drives the actuator.2.2 SPECIFICATIONS2.2.1 TRANSMITTER2.2.2 RECEIVERSpecificationItem DC 12V Rated Supply Voltage Below than 5.5mA Operating Temperature - 30 ~ + 80℃Max Humidity 95% Standby Current (in alarm setting condition) Code Rolling Code(Hopping Algorithm) Battery life 2 Year(10Times/Day)(Lithium 3V 1EA) Electric field strength 10mW (433.92MHz) Operating temperature range -20 ~+60℃ Frequency 315 MHz Storage temperature range -30 ~ 80℃ Modulation FSKITEMSPECIFICATIONRated supply voltage DC 3V
2.3 Operating summary① TRANSMITTER's button is pushed.② TRANSMITTER sends the code by radio frequency.③ RECEIVER gets the code and decodes it.④ RECEIVER judges the code whether it is right code or not.⑤ RECEIVER checks door lock or unlock Tail-Gate state.⑥ RECEIVER drives the actuator. 2.3.1 LOCK & UNLOCK ① If LOCK or UNLOCK button is pushed for less than 1 sec, then TRANSMITTER sends the LOCK or UNLOCK DATA.② If TAIL-GATE button is pushed for more than 1 sec, then TRANSMITTER sends the TAIL-GATE DATA.2.4 Caution① Danger of explosion if battery is incorrectly replaced.② Replace only with the same or equivalent type recommended by the manufacturer. ③ Dispose of used batteries according to the manufacturer's instructions.
3. USER MANUAL3.1 NAME : BCM system- This system is BCM and inculdes RKE. - RKE in BCM system is intended for auto door lock or unlock or TAIL-GATE in vehicle. - This BCM system is to be installde on motor vehicles as *OE item. *OE : Original Equipment. *BCM : Body Control Module. *RKE : Remote Keyless Entry.3.2 SYSTEM CONSTRUCTIONSYSTEM IN VEHICLESYSTEM FOR TEST * Through the use of lamp, operating state is displayed by lamp. lamp 'ON' means that actuator is operated by door lock or unlock or tail-gate output signal. ANTENNAROLLING CODE(315 MHz)ANTENNARECEIVERBATTERYlampROLLING CODE(315 MHz)LOCK or UNLOCK or TAIL-GATE DATABATTERYDOORACTUATORRECEIVER

Navigation menu