MOBASE ELECTRONICS SEKSAM11ARX Remote Keyless Entry System User Manual AM11MY TX FCC IC 2010 03 08

Daedong Co. Ltd. Remote Keyless Entry System AM11MY TX FCC IC 2010 03 08

User manual

1. GENERAL1.1. Model No. ΄Ͷͼ΄͞Ͳ;͢͢Ͳ΅Ω͑ΒΟΕ͑΄Ͷͼ΄͞Ͳ;͢͢Ͳ΃Ω1.2. Make΄ΙΚΟΔΙΒΟΘ͑ͶΝΖΔΥΣΚΔΤ͑ʹΠ͑͟͝ͽΥΕ͟1.3. Name and address of manufacturer΄ΙΚΟΔΙΒΟΘ͑ͶΝΖΔΥΣΚΔΤ͑ʹΠ͑͟͝ͽΥΕͨͤͥͣ͑͟͞͝ΈΠΟΤΙΚ͞ΕΠΟΘ͑͝͵ΒΟΨΠΟ͞ΘΦ͑͝ͲΟΤΒΟ͞ΤΚ͑͝ͼΪΦΟΘΜΚ͞ΕΠ͑ͥͣͦͪ͑͝͞͡͡͝ͼΠΣΖΒ1.4. Address of assembly plantͨͤͥͣ͑͞͝ΈΠΟΤΙΚ͞ΕΠΟΘ͑͝͵ΒΟΨΠΟ͞ΘΦ͑͝ͲΟΤΒΟ͞ΤΚ͑͝ͼΪΦΟΘΜΚ͞ΕΠ͑ͥͣͦͪ͑͝͞͡͡͝ͼΠΣΖΒ
2. PRODUCT SPECIFICATION2.1 Scope of Remote Keyless Entry in BCM system.21.1 Key part : TRANSMITTER is inside of the remote key, and it sends the rolling code to the RECEIVER by radio frequency. 2.1.2 RECEIVER : It receives the rolling code and decodes that, thereafter RECEIVER drives the actuator.2.2 Specification2.2.1 TRANSMITTER2.2.2 RECEIVERBelow than 5.5mA(in alarm setting condition) Standby CurrentSpecificationItem DC 9 ~ 16V Operating Voltage DC 12V Rated Supply Voltage Operating Temperature - 30 ~ + 80ଇMax Humidity 95% Battery life 2 Year(10Times/Day)(Lithium 3V 1EA) Frequency 315.00MHz Code Rolling Code(Hopping Algorithm)Operating voltage range DC 2.5 ~ 3.2V Operating temperature range -20 ~+60ଇITEM SPECIFICATIONRated supply voltage DC 3V Storage temperature range -30 ~ 80ଇ Modulation FSK
2.3 Operating summaryཛ TRANSMITTER's button is pushed.ཛྷ TRANSMITTER sends the code by radio frequency.ཝ RECEIVER gets the code and decodes it.ཞ RECEIVER judges the code whether it is right code or not.ཟ RECEIVER checks door lock or unlock or PANIC state.ᐲ RECEIVER drives the actuator.ᐳ RECEIVER drives the horn2.3.1 LOCK & UNLOCK & PANICᐭ If LOCK or UNLOCK button is pushed for less than 5 sec, then TRANSMITTER sends the LOCK or UNLOCK DATA.ᐮ If PANIC button is pushed for more than 0.5 sec, then TRANSMITTER sends the PANIC DATA.ᐯ If LOCK & UNLOCK buttons are pushed for more than 4 sec, then TRANSMITTER sends the TWO-TURN UNLOCK DATA.2.4 Cautionᐭ Danger of explosion if battery is incorrectly replaced.ᐮ Replace only with the same or equivalent type recommended by the manufacturer.ᐯ Dispose of used batteries according to the manufacturer's instructions.
3. USER MANUAL3.1 Name : BCM system- This system is BCM and includes RKE.- RKE in BCM system is intended for auto door lock or unlock in vehicle.- This BCM system is to be installed on motor vehicles as *OE item. *OE : Original Equipment. *BCM : Anti Theft Alarm System. *RKE : Remote Keyless Entry.3.2 System construction3.2.1 System in vehicle3.2.2 System for test * Through the use of lamp, operating state is displayed by lamp. lamp 'ON' means that actuator is operated by door lock or unlock or panic output signal. ࣽऊऐँऊऎँࣿँअऒँऎࣾࣽऐऐँऎकऀऋऋऎࣽࣿऐऑࣽऐऋऎऎऋईईअऊःࣽऊऐँऊऊࣽऎँࣿँअऒँऎࣾࣽऐऐँऎकऀऋऋऎࣽࣿऐऑࣽऐऋऎऎऋईईअऊःࣿऋऀँࣽऊऐँऊऊࣽऎँࣿँअऒँऎࣾࣽऐऐँऎक ईऋࣿइࣜफमࣜऑऊईऋࣿइࣜफमࣜऌࣽऊअࣿईँऀऎऋईईअऊःࣿऋऀँ
GGGGGGGGGGG"CAUTION: Exposure to Radio Frequency Radiation. Antenna shall be mounted in such a manner to minimize the potential for human contact during normal operation. The antenna should not be contacted during operation to avoid the possiblility of exceeding the FCC radio frequency exposure limit.

Navigation menu