MOBASE ELECTRONICS SEKSAM11ARX Remote Keyless Entry System User Manual AM11MY TX FCC IC 2010 03 08
Daedong Co. Ltd. Remote Keyless Entry System AM11MY TX FCC IC 2010 03 08
User manual
1. GENERAL 1.1. Model No. ΄Ͷͼ΄͞Ͳ;͢͢Ͳ΅Ω͑ΒΟΕ͑΄Ͷͼ΄͞Ͳ;͢͢ͲΩ 1.2. Make ΄ΙΚΟΔΙΒΟΘ͑ͶΝΖΔΥΣΚΔΤ͑ʹΠ͑͟͝ͽΥΕ͟ 1.3. Name and address of manufacturer ΄ΙΚΟΔΙΒΟΘ͑ͶΝΖΔΥΣΚΔΤ͑ʹΠ͑͟͝ͽΥΕ͟ ͨͤͥͣ͑͞͝ΈΠΟΤΙΚ͞ΕΠΟΘ͑͝͵ΒΟΨΠΟ͞ΘΦ͑͝ͲΟΤΒΟ͞ΤΚ͑͝ͼΪΦΟΘΜΚ͞ΕΠ͑ͥͣͦͪ͑͝͞͡͡͝ͼΠΣΖΒ 1.4. Address of assembly plant ͨͤͥͣ͑͞͝ΈΠΟΤΙΚ͞ΕΠΟΘ͑͝͵ΒΟΨΠΟ͞ΘΦ͑͝ͲΟΤΒΟ͞ΤΚ͑͝ͼΪΦΟΘΜΚ͞ΕΠ͑ͥͣͦͪ͑͝͞͡͡͝ͼΠΣΖΒ 2. PRODUCT SPECIFICATION 2.1 Scope of Remote Keyless Entry in BCM system. 21.1 Key part : TRANSMITTER is inside of the remote key, and it sends the rolling code to the RECEIVER by radio frequency. 2.1.2 RECEIVER : It receives the rolling code and decodes that, thereafter RECEIVER drives the actuator. 2.2 Specification 2.2.1 TRANSMITTER 2.2.2 ITEM SPECIFICATION Rated supply voltage DC 3V Operating voltage range DC 2.5 ~ 3.2V Operating temperature range -20 ~+60ଇ Storage temperature range -30 ~ 80ଇ Modulation FSK Frequency 315.00MHz Code Rolling Code(Hopping Algorithm) Battery life 2 Year(10Times/Day)(Lithium 3V 1EA) Item Specification Rated Supply Voltage DC 12V Operating Voltage DC 9 ~ 16V Operating Temperature - 30 ~ + 80ଇ Max Humidity 95% RECEIVER Standby Current Below than 5.5mA (in alarm setting condition) 2.3 Operating summary ཛ TRANSMITTER's button is pushed. ཛྷ TRANSMITTER sends the code by radio frequency. ཝ RECEIVER gets the code and decodes it. ཞ RECEIVER judges the code whether it is right code or not. ཟ RECEIVER checks door lock or unlock or PANIC state. ᐲ RECEIVER drives the actuator. ᐳ RECEIVER drives the horn 2.3.1 LOCK & UNLOCK & PANIC ᐭ If LOCK or UNLOCK button is pushed for less than 5 sec, then TRANSMITTER sends the LOCK or UNLOCK DATA. ᐮ If PANIC button is pushed for more than 0.5 sec, then TRANSMITTER sends the PANIC DATA. ᐯ If LOCK & UNLOCK buttons are pushed for more than 4 sec, then TRANSMITTER sends the TWO-TURN UNLOCK DATA. 2.4 Caution ᐭ Danger of explosion if battery is incorrectly replaced. ᐮ Replace only with the same or equivalent type recommended by the manufacturer. ᐯ Dispose of used batteries according to the manufacturer's instructions. 3. USER MANUAL 3.1 Name : BCM system - This system is BCM and includes RKE. - RKE in BCM system is intended for auto door lock or unlock in vehicle. - This BCM system is to be installed on motor vehicles as *OE item. *OE : Original Equipment. *BCM : Anti Theft Alarm System. *RKE : Remote Keyless Entry. 3.2 System construction 3.2.1 System in vehicle ऎऋईईअऊः ऎऋईईअऊः ࣿऋऀँ ࣽऊऐँऊ ࣽऊऐँऊऊࣽ ࣾࣽऐऐँऎक ऎँࣿँअऒँऎ 3.2.2 ऀऋऋऎ ࣽࣿऐऑࣽऐऋऎ System for test ऎऋईईअऊः ࣿऋऀँ ࣽऊऐँऊऊࣽ ࣾࣽऐऐँऎक ऎँࣿँअऒँऎ ईऋࣿइࣜफमࣜऑऊईऋࣿइࣜफमࣜऌࣽऊअࣿ ईँऀ * Through the use of lamp, operating state is displayed by lamp. lamp 'ON' means that actuator is operated by door lock or unlock or panic output signal. G G "CAUTION: Exposure to Radio Frequency Radiation. Antenna shall be mounted in such a manner to minimize the potential for human G contact during normal operation. The antenna should not be contacted during G operation to avoid the possiblility of exceeding the FCC radio frequency exposure limit.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0.5 (Windows) Create Date : 2010:03:10 15:46:29+09:00 Modify Date : 2010:03:10 15:46:29+09:00 Metadata Date : 2010:03:10 15:46:13+09:00 Document ID : uuid:C962B49E102CDF119DD7F4E2D9356550 Instance ID : uuid:ec2490cb-2cd5-499a-9a02-a43376df1e2e Derived From Instance ID : uuid:bbbbc518-1156-479b-836e-08202816a9f4 Derived From Document ID : uuid:f09953ec-7abd-452c-b498-b21c10afd505 Format : application/postscript Title : AM11MY TX 遺곷? FCC_IC 2010.03.08.xls Creator : Hong Page Count : 5 Author : HongEXIF Metadata provided by EXIF.tools