MOBASE ELECTRONICS SYEC4FOB1608 FOB-SMART KEY User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3055733
Application ID	CpcNzbGK1j9pUaOWzq/ejQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	13.27kB (165832 bits)
Date Submitted	2016-07-08 00:00:00
Date Available	2016-07-08 00:00:00
Creation Date	2016-05-19 09:30:35
Producing Software	Microsoft® Excel® 2016
Document Lastmod	2016-06-03 17:39:47
Document Title	User Manual
Document Creator	Microsoft® Excel® 2016
Document Author:	0101616

적용차종
페이지(SHT/SHTS)
PD
1/11
작성처
전자설계2팀
INFORMATION DOCUMENT NO.
Title : RELATING TO CE TYPE-APPROVAL
AS SEPARATE TECHNICAL UNIT
OF VEHICLE RF REMOTE KEYLESS ENTRY IN SMART KEY SYSTEM
목차
부호
제정일자
2016. 05. 13
Information Document
(5 sheets: Include cover)
Attachment 1 - System diagram
(1 sheet)
Attachment 2 - Fob block diagram
(1 sheet)
Attachment 3 - Schematic of fob
(Each 1 sheet)
Attachment 4 - Layout of fob
(1 sheet)
Attachment 5 - Part List
(1 sheet)
신 규 작 성
변 경 내 역
참고자료
전 PAGE
관련 PAGE
구분
작 성
결
재
2016.05.13
개정일자
검 토
임현수
작성자
승 인
Title :
NO.
Information Document
Date
SHT/SHTS : 2/11
0.
GENERAL
0.1.
Make
SEOYON ELECTRONICS Co.,Ltd.
0.2.
Model No.SYEC4FOB1608
- Transmitter : FOB
- Receiver : SMART KEY SYSTEM
0.3.
Name and address of manufacturer
SEOYON ELECTRONICS Co.,Ltd.
734-2, Wonshi-Dong, Ansan-Si, Kyonggi-Do, Korea.
0.4.
Address of assembly plant
SEOYON ELECTRONICS Co.,Ltd.
734-2, Wonshi-Dong, Ansan-Si, Kyonggi-Do, Korea.
Title :
NO.
Information Document
Date
SHT/SHTS : 3/11
2.
PRODUCT SPECIFICATION
2.1
Scope of RKE, passive entry control, passive start control in SMART Key system.
2.1.1
FOB KEY : It has the functions for passive entry and passive start including
RKE functions. It also has the TP for emergency authentication for passive start
2.1.2
SMART Key system : It is an ECU to control the whole smart key system.
It has the functions such as passive entry control, passive start control, RKE functions.
2.2
SPECIFICATIONS
2.2.1
FOB KEY
2.2.2
ITEM
SPECIFICATION
Rated supply voltage
DC 3V
Operating voltage range
DC 2.5 ~ 3.2V
Operating temperature range
- 10 ~ + 60℃ with Battery
Storage temperature range
- 40 ~ + 85℃ without Battery
Modulation
FSK
Frequency
433.92MHz
Code
Rolling Code(Hopping Algorithm)
Electric field strength
10mW (433.92MHz)
Battery life
2 Year(10Times/Day)(Lithium 3V 1EA)
Item
Specification
Rated Supply Voltage
DC 12V
Operating Voltage
DC 9 ~ 16V
Operating Temperature
- 30 ~ + 80℃
Max Humidity
95%
RECEIVER
Standby Current
Below than 5.5mA
(in alarm setting condition)
Title :
NO.
Information Document
Date
SHT/SHTS : 4/11
2.3
Operating summary
-RKE
① TRANSMITTER's button is pushed.
② TRANSMITTER sends the code by radio frequency.
③ RECEIVER gets the code and decodes it.
④ RECEIVER judges the code whether it is right code or not.
⑤ RECEIVER checks door lock or unlock, trunk state.
⑥ RECEIVER drives the actuator.
- Passive Start
①
②
③
④
⑤
⑥
2.3.1
the SSB button of SMK is pressed to start the engine.
The indoor ANT of the car transmits the code via the Low Frequency.
Fob(receiver) decrypts the received code from SMK.
Fob transmits the code via radio frequency.
SMK should check the boot state.
SMK controls a start-up operation and the transition of supply power.
LOCK & UNLOCK
① If LOCK or UNLOCK button is pushed for less than 1 sec, then
TRANSMITTER sends the LOCK or UNLOCK DATA.
② If TRUNK button is pushed for more than 1 sec, then
TRANSMITTER sends the TRUNK DATA.
2.4
Caution
① Danger of explosion if battery is incorrectly replaced.
② Replace only with the same or equivalent type recommended by the manufacturer.
③ Dispose of used batteries according to the manufacturer's instructions.
Title :
NO.
Information Document
Document
Information
Document
Information
Date
SHT/SHTS : 5/11
3.
USER MANUAL
3.1
ITEM
: SMK system
- This system is SMK and inculdes RKE.
- RKE in SMK system is intended for auto door lock or unlock or TRUNK in vehicle.
- This SMK system is to be installde on motor vehicles as *OE item.
*OE : Original Equipment.
*SMK : Smart Key System
*RKE : Remote Keyless Entry.
3.2
SYSTEM CONSTRUCTION
3.2.1
SYSTEM IN VEHICLE
Radio Frequency
(433.92MHz)
ANTENNA
BATTERY
LF ANT
SMK
Low Frequency
(134.2KHz)
3.2.2
SYSTEM FOR TEST
Radio
Frequency
(433.92MHz)
SSB
ANTENNA
BATTERY
LF ANT
SMK
Low Frequency
(134.2KHz)
SSB
① When the lamp of "B+" is 'On', it means that power is supplied.
② When the SSB is pressed in position of INT1 ANT Switch on,
it means a start-up function that ACC_RLY and IGN1_RLY lamp is 'On'(SSB_SW1, SW_2 'On').
③ When the SSB is pressed repeatively, ACC_RLY and IGN1_RLY is 'On' and 'Off', repeatively.
* It shows the status of operation through the lamp used.
FCC Information
This device complies with part 15 of the FCC Results. Operation is subject to the
following two conditions :
(1) This Device may not cause harmful interface, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for CLASS B digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try correct the interference by one or more of the following measures:
1.1. Reorient or relocate the receiving antenna.
1.2. Increase the separation between the equipment and receiver.
1.3. Connect the equipment into an outlet on a circuit different from that to which receiver is connected.
1.4. Consult the dealer or experienced radio/TV technician for help.
WARNING
Changes or modifications not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
“CAUTION : Exposure to Radio Frequency Radiation.
Antenna shall be mounted in such a manner to minimize the potential for human contact during normal
operation. The antenna should not be contacted during operation to avoid the possibility of exceeding the
FCC radio frequency exposure limit.
"ATTENTION: L'exposition aux rayonnements à fréquence radioélectrique.
Antenne doit être montée de telle manière à minimiser le risque de contact humain pendant l'utilisation
normale. L'antenne ne doit pas être contacté pendant le fonctionnement pour éviter la possibilité de
dépasser la limite de l'exposition aux fréquences radio de la FCC.
IC Information
This device complies with Industry Canada license-exempt RSS standard(s). Operation in subject to The
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Cet appareil est conforme avec Industrie Canada RSS standard exempts de licence(s), Son utilisation est
soumise à Les deux conditions suivantes: (1) cet appareil ne peut pas provoquer d’interférences et (2) cet
appareil doit accepter Toute interférence, y compris les interférences qui peuvent causer un mauvais
fonctionnement du dispositif.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : 0101616
Create Date                     : 2016:05:19 09:30:35+09:00
Modify Date                     : 2016:06:03 17:39:47+09:00
Page Count                      : 7
Language                        : ko-KR
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Producer                        : Microsoft® Excel® 2016
Creator Tool                    : Microsoft® Excel® 2016
Metadata Date                   : 2016:06:03 17:39:47+09:00
Format                          : application/pdf
Creator                         : 0101616
Document ID                     : uuid:e259912a-4b87-470e-ae02-55ee185adad5
Instance ID                     : uuid:3ba5a406-70fc-42b0-90aa-ae8917e67a28

EXIF Metadata provided by EXIF.tools