User manual
1
User Manual
2
Directory
1 Install......................................................................................................................................... 2
1.1 Battery charging ............................................................................................................ 2
2 Use and Maintenance ................................................................................................................ 3
Thank you for using the mobilephone; it’s the world's premiere, Provide you the high quality
of mobile communication and entertainment enjoy.
This user guilds specially used to guide you understand the mobilephone function and
characteristic.
Please read the instruction file first
Before you use this mobilephone, please read all the safety cautions in the
instructions in detail, to ensure safety and correct use.
The descriptions are based on the default settings
The pictures and screen shots may different from the actual product.
Receive and send message, upload and download, automatic synchronism or GPRS
service may cause other kinds of fee. If you want to avoid the extra fee, choose the probable
charging plan. Any relevant information, please contact the service supplier.
To the unknown software, be careful when install, the strange website pop up
when browsing the internet, you can click but better to avoid the operation or
the mobilephone will be poisoned.
Please properly keep this instruction book for the future reference.
Mobile phone parts diagram
1 Install
1.1 Battery charging
When using the mobilephone at the first time, need to charge for the mobilephone, can
use charger or connect the phone with the computer via data cable.
The mobilephone will issue warning tone and display electricity shortage information
when low battery, the battery icon will turn red, moreover, the mobilephone will turn off
automatically when electricity is too low. Need to charge then you can use the
mobilephone.
If the battery is power off, can't turn on the phone immediately even connect to the
charger, before you turn on the phone, please charge for several minutes.
3
When charging with the charger, Please put the small end plug of the charger into the
mobilephone in the multi-function socket, put the big end into the standard power socket,
be attention the improper charger connection will lead to serious damage to the
mobilephone, to the damage caused by misoperation, will not guarantee to repair.
Can use the mobilephone when charging, but thus will influence the charging time of the
mobilephone, the phone may get hot when charging, this is normal phenomenon, do not
affect the using life and performance.
When the batteries get full electricity (battery icon doesn’t move), please disconnect the
charger and the mobilephone, and take down the charger from the socket. Do not take
off the battery when charging, this might damage the mobilephone.
Reduce battery loss
If launched automatic synchronization, bluetooth functon in the background, the battery will
consumes faster. If you want to save electricity, please shut down unnecessary application. You
can also reduce background light time and the brightness of the display screen, or press the power
off key to switch over to sleep patterns. Other functions
1, SIM card application: this will be differ per your operators
2, Search: shortcut of search engine
2 Use and Maintenance
Far from any liquid, do not put your mobilephone in water, raining or expose in any
wet places.
Far from extreme cold or hot, avoid expose the mobilephone in below 10℃ or above
45 ℃.
Far from dust and dirt, do not put mobilephone in dust, dirt, sandy, food and other
improper physical environment.
Please use dry and soft cloth to clear mobile, do not use alcohol or other kinds of
cleanser
Use carefully and prevent mobile from falling.
Phone Front View:
4
1.Receiver
2. Keys
Phone Back View
5
1. Speaker
2. SOS button
3. On/Off Switch
Side View:
1. Volume button
6
1. Headphone jack
1. Charging promptly
2. MIC
3. Micro USB
Federal Communications Commission (FCC) Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any
interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
7
generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause
harmful interference to radio or television reception, which can be determined by turning
the
equipment off and on, the user is encouraged to try to correct the interference by one or
more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications made to this device not expressly approved by Kisa Pty
Ltd. may void the FCC authorization to operate this device.
Note: The manufacturer is not responsible for any radio or tv interference caused by
unauthorized
modifications to this equipment. Such modifications could void the user’s authority to
operate the
equipment.
FCC Statement
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate
the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
SAR Information Statement
Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for
exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are
part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on
standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies.
The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The
exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The
SAR limit set by the FCC is 1.6 W/kg. * Tests for SAR are conducted with the phone transmitting at its highest certified power level in
all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone
while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so
as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the
power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not
exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and
locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone
when tested for use at the ear is 1.309W/Kg and when worn on the body, as described in this user guide, is 0.768W/Kg(Body-worn
measurements differ among phone models, depending upon available accessories and FCC requirements). The maximum scaled
SAR in hotspot mode is 0.1.182W/Kg. While there may be differences between the SAR levels of various phones and at various
positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in compliance with the FCC RFexposure guidelines. SAR information on this
model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/ oet/fccid after searching
on
FCC ID: 2AHS8-KPAU03Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications
Industry Asso-ciation (CTIA) web-site at http://www.wow-com.com. * In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a sub-stantial margin
of safety to give additional protection for the public and to account for any variations in measurements.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance
of 10mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and
similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these
requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.