MOBOTIX KPADB RFID access control system User Manual Reg Notice Keypad

MOBOTIX AG RFID access control system Reg Notice Keypad

Contents

Reg_Notice_Keypad

The HiRes Video CompanyUSwww.mobotix.comHiRes Video InnovationsThe German company MOBOTIX AG is known as the leading pioneer in network camera technology and its decentralized concept has made high-resolution video systems cost-ecient.MOBOTIX CORP • Manhattan (NY) • Phone: 888-MOBOTIX (662 6849) • us-sales@mobotix.com • Made in GermanyKeypadRFID: Regulatory NoticeFederal Communications Commission (FCC) and Industry Canada (IC) Notice for MX-Keypad1-EXT (M/N: Keypad-B)(FCC ID: YYRKPADB, IC ID: 9357A-KPADB)NOTICE:This device complies with Part 15 of the FCC Rules [and with ICES-003 of Industry Canada]. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.NOTICE:Le présent appareil est conforme aux CNR d‘Industrie Canada applicables aux appareils radio exempts de licence. L‘exploitation est autorisée aux deux conditions suivantes:(3) l‘appareil ne doit pas produire de brouillage, et(4) l‘utilisateur de l‘appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d‘en compromettre le fonctionnement.NOTICE:Changes or modifications made to this equipment not expressly approved by MOBOTIX AG may void the FCC authorization to operate this equipment.NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Radiofrequency Radiation Exposure Information:The radiated output power of the device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such a manner that the potential for human contact during normal operation is minimized.Ministry of Internal Aairs and Communications Notice for MX-Keypad1-EXTNOTICE:• This device has been granted a designation number by Ministry of Internal Aairs and Communications• This device should not be modified (otherwise the granted designation number will be invalid)Keypad with Contactless RFID TechnologyMOBOTIX KeypadRFID MX-Keypad1-EXT (in triple frame silver)RFID cards for keyless entryIP Video Door StationMX-Keypad1-EXT31.287_US_V3_07/2013Weatherproof (IP65)–30 to +60°C/–22 to +140°F
The HiRes Video CompanyUSwww.mobotix.comHiRes Video InnovationsThe German company MOBOTIX AG is known as the leading pioneer in network camera technology and its decentralized concept has made high-resolution video systems cost-ecient.MOBOTIX CORP • Manhattan (NY) • Phone: 888-MOBOTIX (662 6849) • us-sales@mobotix.com • Made in GermanyKeypadRFID: Conformity 2013 • Declaration of Conformity: www.mobotix.com> Support> Media Library> CertificatesCopyright © MOBOTIX AG 2013 • Made in Germany • Technical information subject to change without notice.HerstellerManufacturer:Fabricant:MOBOTIX AGProdukt:Product:Produit:MxBus-ModulMxBus moduleModule MxBusTyp:Type:Type:MX-Keypad1-EXTBei bestimmungsgemäßer Verwendung erfüllt das bezeichnete Produkt die Bestimmungen gemäß Artikel 3 der R&TTE-Richtlinie 1999/5/EG.The product identified above complies with the essential requirements of article 3 of the guideline R&TTE 1999/5/EG.Le produit désigné ci-dessus est conforme aux exigences fondamentales de l’article 3 de la directive R&TTE 1999/5/EG.Angewendete harmonisierte Normen:Harmonised standards applied:Normes harmonisées:Safety EN 60950-1:2006/A11:2009/A1:2010/A12:2011Health EN 62311:2008EMC EN 301 489-1 (V1.9.2)EN 301 489-3 (V1.4.1)ERM-SRD EN 300 330-1 (V1.7.1)EN 300 330-2 (V1.5.1)Weitere angewendete Normen:Other harmonised standards applied:Autres normes harmonisées:FCC Part 15B, Part 15CRSS 210Item 3 of Article 44-1 of the Radio OrdinanceAdresse:Address:Adresse:MOBOTIX AG Kaiserstrasse 67722 Langmeil Germany+ TK-Nr.Phone numberN° de communication:Fon: Fax: E-Mail:+49 6302 981 6-103 +49 6302 981 6-190 us-sales@mobotix.com Langmeil, July 23, 2013Ort, DatumPlace & date of issueLieu et dateDr. Ralf Hinkel CEO, MOBOTIX AGName und UnterschriftName and signatureNom et signatureNotes• Please follow the notes on installing and operating the device in the MOBOTIX T24 System Manual (www.mobotix.com in the Support> Manuals section).• The MOBOTIX KeypadRFID is only to be used in the original frames of the IP Video Door Station.• Before Installing, make sure that the seal on the back of the KeypadRFID has been properly attached.• When inserting the module into the frame, only press at the edge, never at the center of the module.• Make sure the device is not operated outside of its operating temperature range of –30 to +60°C/–22 to +140°F.99mm/3.9in99mm/3.9inDeclaration of ConformityDimensions Back

Navigation menu