MOVON 1402010 Bluetooth Alarm Band User Manual

MOVON Corporation Bluetooth Alarm Band

User Manual

BuzzPTM-ICNWIRELESSbandPTM-ICN with call & missing vibrationUser Manual
   Bluetooth wristband PTM-ICN             USB cable                                  User manual HOW TO USECHARGINGMake sure the product is fully charged before you start using it. The product is not functional while charging.1. Charging      LED light turns steady blue while the battery is charging.     When the product is fully charged (about 2 hours), LED light turns o.ENCLOSURESPRODUCT COMPONENTS-1- English English2. Low Battery Warning     When the battery is low, the product vibrates 4 times every 30 seconds.3. Operating and Charging Duration     Charging: Approx. 2 hours     Standby mode: Approx. 90 hoursPOWER ON/ OFF     Power On : Press and hold MFB for 3 seconds.                            A blue LED blinks 3 times until power is on.     Power O : Press and hold MFB for 4 seconds.                            A blue LED blinks 4 times until power is o.PAIRING[Note] Before you use the product, you need to pair it with your mobile phone rst.1. Make sure the product is turned o.2. Press and hold MFB button for 6 seconds until blue LED turns on steadily.3. Set your Bluetooth mobile phone to discover the product.      For most mobile phones, you can nd Bluetooth mode by selecting Setting/     Tools- Connections- Bluetooth.     (For further information, please refer to your mobile phone’s manual)        -2-Charging PortMultifunction ButtonIndication LED3. referenceInput PIN Code         0000Active Dev ListModel NameMB20ConnectivityBluetooth......
4. When your mobile phone nds the product, conrm it by selecting “yes” or “ok”.     Input PIN Code         0000Active Dev ListModel NamePTM-ICNConnectivityBluetooth......5. After entering pin code “0000” from your keypad, press “yes” or “ok”.     Input PIN Code         0000Active Dev ListModel NameMB20ConnectivityBluetooth......6. In the case of an unsuccessful pairing, repeat steps 3 to 5.7. When pairing is completed, the product vibrates once shortly.     EASY PAIRING: If you use headset for the rst time, headset will go pairing mode                                   directly.     Auto connection: The product supports auto connection that makes it possible                                          to be  automatically connected to the last connected device                                         after turning on, by pressing and holding MFB about 2 seconds.                                         When the product is o, press and hold MFB about 3 seconds. BASIC OPERATION     Incoming Call Alert : The product vibrates twice every 2 seconds when your                                                mobile phone receives an incoming call.                                                By pressing MFB once, the product stops vibration.      Rejecting a Call : To reject a call, press MFB for 2 seconds.     Out-of-range Alert /Auto Connection : When the product loses connection due       to out-of-range failure (10m), it vibrates 3 times every 10 seconds.       When it returns within connectable range,it tries auto reconnection. With       completing auto reconnection, the product vibrates shortly once.         [Note] Before using your product: The product does not support conversation function.                          After connecting the product with your mobile phone, you might hear no sound                      from the mobile phone depending on your mobile phone maker. In this case, set the                     sound to a mobile phone or ear phone from your mobile phone’s Bluetooth menu.LED INDICATIONStatus Blue LED IndicationPower On Blue LED blinks 3 timesPower O Blue LED blinks 4 timesPairing Mode Blue LED blinks steadilyConnectable Mode Blue LED blinks once every 5 secondsConnected Mode Blue LED blinks twice every 5 secondsCharging in Progress Blue LED turns onCharging Complete Blue LED turns oSPECIFICATIONSModel Name PTM-ICNBluetooth Core Spec Bluetooth Specication 2.0-3- -4-English English5. reference4. reference
Prole Headset Prole, Handsfree Prole 1.5Carrier Frequency 2402MHz to 2480MHzModulation Method GFSK, 1Mbps, 0.5BT GaussianMaximum Data Rate Asynchronous : 2178.1 kbps / 177.1 kbpsSynchronous : 1306.9 kbps / 1306.9 kbpsBluetooth Class Class 2Hopping 1600 hops/sec, 1MHz Channel SpaceTransmit Power 0 dBmCoverage Range 10 MetersReceiver Sensitivity -82 dBm / 0.1 % BERContinuous Talk Time 90 HoursWeight 19 gDimension 21.1(W) x 120.1(L) x 105.1(H) mmCharging Voltage DC 5.0 ~ 5.3 VCharging Time 2 HoursOperating Temperature -10° to +50°CStorage Temperature -20° to +80°CBattery Lithium Polymer 3.7V 55mAHSAFETY AND GENERAL INFORMATION1. Please read this guidebook carefully and follow the instruction.2. To avoid any damage or malfunction of the unit, do not drop it from high place.3. Keep away unit from humidity, water and any other liquid. And if the unit is exposed by water, moisture      and other liquid directly, then do not operate it normally to avoid any electrical shock, explosion and damage      of the unit.4. Do not place or keep the unit near the heat sources such as direct sun light, radiators, stoves or other      apparatus which produce heat.       It may cause explosion, degrade of performance  and reduce battery life.5. Do not modify, repair & disassemble unit at discretion. [especially battery: it may cause an explosion]6. Do not place the heavy objects on the unit.7. Use only supplied and approved charger.8. Replacement or service must be done at a qualied service center or manufacturer.9. Unplug this unit when unused for long period of time or during lightening storms.         [CAUTIONS] ELECTRIC SHOCK HAZARD : The battery used in this device may present a risk of re or chemical                                    burn if mis-treated.FCC STATEMENTThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received , including interference that may cause undesired     operation.         [Note] The manufacturer is not responsible for AzNY interference, for example RADIO or TV  interference,                       caused by unauthorized modications to this equipment. Such modications could void the user’s                       authority to operate the equipment.EUThis product is CE marked according to the provision of the R&TTE Directive (99/5/EC). Here by MOVON Corporation, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Please note that this product uses radio frequency bands not harmonized within EU. Within the EU this product is intended to be used in Austria, Belgium, Denmark, Finland, France,Germany, Greece, Ireland, Italy, Luxembourg, The Netherlands, Portugal, Spain, Sweden, United Kingdom and within EFTA in Iceland, Norway and Switzerland.  Bluetooth is a trademark owned by the Bluetooth SIG, Inc.WARRANTYThe condition of this warranty and our responsibilities under this warranty are as follows: Supplier’s warranty is non-transferable. And this warranty is limited to the original purchaser only.- You must be able to prove the date of original purchase of the unit with a dated receipt.-5- -6-English English
- The warranty is not applicable if the product has been subject to physical abuse, improper installation,    modication or repair by unauthorized third party.- The responsibility of supplier’s products shall be limited to the repair or replacement of the product at it’s    sole discretion.- Specically exempt from any warranty are limited-life consumable components subject to normal wear and     tear such as batteries, decorates and other accessories.- A supplier will not take any responsibility if the failure of the unit has resulted from accident, abuse, misuse or    any unauthorized repair, modication or disassemble.- Modication and repair of the unit should be done by authorized and qualied service personnel, center or      returned to the manufacturer- This warranty gives you specic legal rights and you may also have other rights which vary  under local laws.WEEE SYMBOL INFORMATION                                                                        Correct Disposal of This Product                    (Waste Electrical & Electronic Equipment)(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product or their local government oce, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.         [IMPORTANT NOTE] To comply with RF exposure requirements, this device may not be co-located  with                                                   any other transmitter or antenna.

Navigation menu