MOVON MC710 SMART CONTROLLER User Manual MC710 manual indd

MOVON Corporation SMART CONTROLLER MC710 manual indd

Users Manual

MC710User ManualSMART CONTROLLER
ENCLOSURE 1. SMART CONTROLLER 2. Micro USB charger 3. Manual PRODUCT COMPONENTS OF SMART CONTROLLER UNITIndication LEDPower On / O3.5 audio jackCharging portNavigation button Play/Pause/OK button Up / Volume Up Down / Volume Down Left / Previous/ REW Right / Next/ FFHome buttonOption buttonMicrophoneCall End buttonMode Switching buttonSpeakerCall buttonPrevious (Cancel) button-1-
CHARGING Connect a micro USB charger to the charging port and plug it into USB port of PC. Before using the unit, charge the battery completely. The LED blinks in RED while charging and will be o when charging is completed. Low battery alarm : When the battery is low, the LED will blink in RED three time and beep sound every 30 seconds. Once MC710 alerts, please charge immediately, otherwise MC710 will be powered o within approx. 10 minutes. PAIRING WITH YOUR BLUETOOTH DEVICES TURN ON/OFF Turning On: LED blinks in Blue PAIRING 1) Put your device in pairing mode. 2) Press the OK button and slide power button up simultaneously, the LED blinks in BLUE rapidly. 3) Your device will  nd the “Smart Controller”. 4) Accepting by pressing “Yes” or “Okay” . (PIN or passkey: 0000) [Note] In case of unsuccessful pairing, please repeat the step 1 ~ 4.-2-Turning On Turning O
Auto Reconnection : MC710 will try to re-connect to the last connected devices when you turn on the MC710. HOW TO UES MULTIMEDIA MODE Play/Pause: press [ ] button Next / FF : Press [ ] button / Hold [ ] Button Previous / REW: press [ ] button / Hold [ ] Button Volume Up / Down: press [ ] / [ ] button NAVIGATION MODE Direction Key: Up / Down / Left / Right & Selection Home button Option button Previous button KEYPAD US QWETRY Keyboard with backlighting [Note] To convert from English to your own language, please press button or button+ button [Note] To using the Keyboard function, your device should support Bluetooth HID pro le.-3-
HANDS-FREE CALL Making a call: Press button for 2 seconds Receiving a call: Press button Rejecting a incoming call: Press button Ending a call: Press button Call waiting : press two seconds and you will be connected to the waiting call. Transferring a call : To transfer a call from your device to MC710 and vice versa, press button for 2 seconds HOW TO SWITCH THE MODE You can switch from Navigation Mode to Multimedia mode and vice versa by pressing button on Keypad.-4-
STATUS INDICATION STATUS LED STATUS BEEP ON Blue LED light blinks twice Pairing mode Blue LED light blinks quickly. Beeps twice continuously Connectable mode Blue LED light blinks every 5 seconds Connected mode Blue LED light blinks twice every 5 seconds Active on a call Blue LED light blinks three times every 5 seconds Receiving a call Blue LED light blinks twice every 2 seconds Backlight on Melody Charging Red LED light on Fully charged Red LED light o Require charging Red LED light blinks three times every 30 seconds Beeps every 30 seconds SPECIFICATIONS Model MC710 Bluetooth version Bluetooth 2.1 + EDR Pro le HSP, HFP, A2DP, AVRCP, HID Coverage range 10 m Talk time 20 Hours Playback time 15 Hours Stand-by Time 400 Hours Size 44.1(W) x 106.1(H) x 11.99(D) mm Weight 45 g Charging time 3 Hours(MAX) Battery Lithium polymer 3.7V 500mAh Operating temperature -20°C ~ +55°C Storage temperature -20°C ~ +80°C-5-
SAFETY AND GENERAL INFORMATION 1. Please read this guidebook carefully and follow the instruction. 2. To avoid any damage or malfunction of the unit, do not drop it from high place. 3. Keep away unit from humidity, water and any other liquid. And if the unit is exposed by water, moisture and other liquid directly, then do not operate it normally to avoid any electrical shock, explosion and damage of the unit. 4. Do not place or keep the unit near the heat sources such as direct sun light, radiators, stoves or other apparatus which produce heat. It may cause explosion, degrade of performance and reduce battery life. 5. Do not modify, repair & disassemble unit at discretion (especially battery: it may cause an explosion. 6. Do not place the heavy objects on the unit. 7. Use only supplied and approved charger. 8. Replacement or service must be done at a quali ed service center or manufacturer. 9. Unplug this unit when unused for long period of time or during lightening storms. [CAUTIONS] ELECTRIC SHOCK HAZARD : The battery used in this device may present a risk of  re or chemical burn if mis-treated.FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received , including interference that may cause undesired operation. [NOTE] The manufacturer is not responsible for AzNY interference, for example RADIO or TV interference, caused by unauthorized modi cations to this equipment. Such modi cations could void the user’s authority to operate the equipment.FCC WARNING This equipment may generate or use radio frequency energy. Changes or modi cations to this equipment may cause harmful interference unless the modi cations are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modi cation is made. [NOTE] This equipment has been tested and found to comply with the limits for a Class B digital device, purchant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.-6-
If this equipment does cause harmful interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit di erent from that to which the receiver is connected. Consult the dealer or an experiencedradio/TV technician for help.”FCC RF Radiation Exposure Statement 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.EU This product is CE marked according to the provision of the R&TTE Directive (99/5/EC). Here by MOVON Corporation, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/ EC. Please note that this product uses radio frequency bands not harmonized within EU. Within the EU this product is intended to be used in Austria, Belgium, Denmark, Finland, France,Germany, Greece, Ireland, Italy, Luxembourg, The Netherlands, Portugal, Spain, Sweden, United Kingdom and within EFTA in Iceland, Norway and Switzerland. Bluetooth is a trademark owned by the Bluetooth SIG, Inc.WARRANTY The condition of this warranty and our responsibilities under this warranty are as follows: Supplier’s warranty is non-transferable. And this warranty is limited to the original purchaser only. You must be able to prove the date of original purchase of the unit with a dated receipt. The warranty is not applicable if the product has been subject to physical abuse, improper installation, modi cation or repair by unauthorized third party. The responsibility of supplier’s products shall be limited to the repair or replacement of the product at it’s sole discretion. Speci cally exempt from any warranty are limited-life consumable components subject to normal wear and tear such as batteries, decorates and other accessories. A supplier will not take any responsibility if the failure of the unit has resulted from accident, abuse,misuse or any unauthorized repair, modi cation or disassemble. Modi cation and repair of the unit should be done by authorized and quali ed service personnel, center or returned to the manufacturer. This warranty gives you speci c legal rights and you may also have other rights which vary under local laws.-7-
WEEE SYMBOL INFORMATION Correct Disposal of This Product (Waste Electrical & Electronic Equipment)(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product or their local government o ce, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. [IMPORTANT NOTE] To comply with RF exposure requirements, this device may not be co-located with any other transmitter or antenna. -8-

Navigation menu