MOVON MDAS10 Driving Assistant System User Manual mdas10 menual EN 1203 19 Converted 1

Download:
Mirror Download [FCC.gov]
Document ID	2269892
Application ID	M1CV2chIK0ow27fQZ8hUyQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	321.27kB (4015920 bits)
Date Submitted	2014-05-16 00:00:00
Date Available	2014-05-16 00:00:00
Creation Date	2014-05-16 17:27:09
Producing Software	Adobe Acrobat 8.0
Document Lastmod	2014-05-16 17:27:26
Document Title	mdas10_menual_EN_1203-19 [Converted]1
Document Creator	Adobe Acrobat 8.0 Combine Files

MDAS -10
KC Certified : MSIP-CMM-MVN-MDAS10
(Movon Driver Assistance System – 10)
Quick Guide
Thank you for purchasing Movon Advanced Driver Assistance-10(MDAS-10).
Please read the manual carefully before installing and using MDAS-10.
Any inappropriate or illegal activities or violation of traffic rules on the roads are drivers’ responsibility. Movon Corp.
will not compensate any damage nor accept responsibility related to behaviors mentioned.
Please be aware of Movon’s policy that private information and traffic related laws are users' responsibility.
MDAS-10 only gives warnings to drivers. The final decision to maneuver/control shall be made by drivers themselves.
Customer service incurred by controlling while driving or damaging/revamping will not be guaranteed by Movon’s policy.
The manual can be modified without notification. Explanations and images may not be up-to-date on the user manual for
upgrading or editing purposes.
The product software is able to be modified for upgrading for better performance without informing in advanced.
Please refer to the http://www.movon.co.kr or http://www.mdas.co.kr for latest updated information.
* Precaution
Do not modify nor disassemble the product.
Do not install in disregard of installation instructions. It is recommended to go to a professional installation shop.
Do not operate while driving, it is prohibited by law. If it is necessary, operate after stopping at a secure area.
Do not separate micro SD card from MDAS-10 while the power is on. Separate after turning off MDAS-10 if it is necessary.
If recorded videos are broken due to users mishandling, the damaged video is not guaranteed to recover.
Do not touch the screen directly with sharp objects. Movon is not liable for damage of the screen.
Operating temperature is -20~65℃(4~149 ℉). MDAS-10 may not operate properly and be damaged in excess
of the temperature parameters.
Lane departure warning system may not work properly due to camera locations and angle, excessive tint, etc.
Copyright ⓒ 2005 by Movon Corporation. All Rights Reserved.
Table of contents
1) Introduction 1. About MDAS-10
2. Specification
3. Components
4. Part description
2) Installation 1. Cabling overview
2. Installing
2.1 Installing rear-view cameras
3. Calibration
3) Function
1. Lane departure warning
2. Dash cam
3. Digital tachograph
10
14
15
16
4) Operation 1. Set-up menu
17
5) Warranty information
21
1.Introduction - 1) Introduction
MDAS-10 is a single camera-based driver assistance system. The product focuses on assisting drivers by preventing drowsy or
reckless driving, and recording driving information with the three functions listed below
Major functions
Lane departure warning(LDW)
Provides Lane Departure Warning (LDW) for safe driving.
It alerts the driver with sound and visual warnings and helps to regain direction if the driver departs lanes
unintentionally. (*activated at 60 km/h (38 mph))
2 Channel HD Dash cam
Records scenes before and after an accident along with imminent crash situations based on gravity
sensor and 720P recording performance. MADS-10 can record rearview scenes (480P) with an external
back-up camera and the screen can be used as a rearview display.
Digital Tacograph
Logs 10 types of data related to driving information such as speed, break usage, RPM, GPS location,
accumulated mileage, daily mileage, etc. Can benefit fleet managements and improve drivers’ driving
behavior as a result of reducing accidents and saving fuel.
-3-
1.Introduction - 2) Specification
CPU
Cortex A8 Series
Screen
4.3 inch, 480x272 pixel, touch screen panel
Camera
1M pixel, Diagonal 103.2°C
Power
DC 12V/24V support (Consumption: 900mA)
Video
MP4(H.264 codec: Front-720P, 30fps, Rear: 480P, 15~30fps)
Audio
AAC/MP3
Format
Storage
Input
4~32GB Micro SD card support
Power port (Micro USB or Rear Connector), Camera port(micro USB)
Camera
110 x 85 x 70 mm
Body
135 x 85 x 20 mm
Size
Operating Temperature
Etc
-20~65˚C
Built-in G-sensor, Mic, Speaker, Wi-Fi(Option), External GPS,
-4-
1.Introduction - 3) Components
MDAS camera
MDAS main
User manual
GPS module
(Option)
Universal 4-pin
mount (Option)
Rear-view camera
(Option)
-5-
Micro SD card 8G
& reader
MDAS cable
1.Introduction - 4) Part description
Micro SD card slot
Double sided tape
Reset hole
Screen On/Off button
Camera cable
Lens
GPS
Main cable port
Touch LCD
MINI USB
-6-
Angle adjuster
2.Installation - 1) Cabling overview
-7-
2.Installation - 2) Installing
Step : 1 Remove the adhesive tape from the camera
and attach to the center of front windshield
from inside. And connect camera cable to the main
cable
* The location of camera that should be within
+/-5cm from the center.
Step 2 : Remove the adhesive tape from MDAS-10
body and attach to a preferred location or
attach to the mount using 4 pin connector.
Step 3 : Connect CAN High/Low cables to those
corresponsive cables. If CAN signal is
unavailable, connect speed, left/right turn
signals, RPM(if needed) directly into
corresponsive vehicle cables.
Step 4 : Find accessory/ignition power(ex: clock, cigar) in fuse box and connect to ACC cable and fix the ground(GND) cable on a
uncoated metallic part of the car body.
Step 5 : Connect the main cable to MDAS-10 after finishing connecting signals with the car and GPS.
-8-
2.Installing - 2.1) Installing rear-view cameras
After attaching the optional rear camera to preferred location on the rear windshield,
connect camera cable to the main cable’s 2.5ø slot.
Caution : If using an external rear camera outside of the car, ensure that the external
rear camera’s connector is following MDAS-10’s cable pin specification indicated
on the picture.
In addition, if the camera’s power consumption exceeds 5V, it will be powered from
a separate power source(eg. rear lamp cables)
-9-
2.Installation - 3) calibration
Entering calibration mode
After the car engine’s on, press Calibration icon after MOVON logo disappears
Initial calibration screen is the same as the picture on left.
Press Calibration once more to proceed to configuration.
-10-
2.Installation - 3) calibration
Select the auto maker (ex: GM, Ford, etc.), and then select
the vehicle model in accordance with year of manufacture.
If the vehicle model is not listed, go to www.mdas.co.kr and
register/sign-up in order to download the appropriate data
file for the vehicle. Then, insert micro SD card after copying
the data file on it.
Adjust the camera knob to locate the yellow line on the
horizon or between the red lines. You can enlarge the
image by clicking the scene frame.
* Turn off power before inserting/separating micro SD card.
Adjust yellow dot line to locate on the vanish line
Adjust the hood line to locate the boundary between the road
and vehicle hood. Then input the vehicle width (From the edge
of right tire to the edge of left tire on the road) and Input the
camera height (From the road to the camera lens)
-11-
2.Installation - 3) calibration
If the camera is attached away from the center line of
the vehicle, please adjust how far it is located from the
center. Its unit is centimetre. (- is left side, + is right side)
Lane departure warning(LDW) sensitivity adjustment.
If you want to change the warning timing, please click the
lane marker. Default value is 0 (at 3) and every unit changes
10 CM length from its side.
Test signal connections
In order to correct speed value, please press “40km” at
24mph(40km/h). Likewise, for RPM, press “2000rpm) at
2000rpm
Test signal connections
Turn on right/left turn signal and check if red light is on
the screen. And press brake pedal and check if the red light
is on the screen.
-12-
2.Installation - 3) calibration
* If the vehicle’s signal is not correct, you can modifty
the data by clicking “modify” in the final screen. So,
if a car signal is not received from the supposed data
connection, you can select a different type of data
you need.
-13-
3.Function - 1) Lane Departure Warning
Lane Departure Warning
062 Km
1.24 m
0.81 m
Speed
Distances between the wheels
1. LDW alerts the driver with sound and visual warnings when the vehicle departs from its lane unintentionally when
driving over 60km/h(38 mph).
2. When MDAS-10 recognizes the lane markings in the environment while driving over 60km/h, the LCD of main body displays green
lines when the car stays in its lane and displays red lines when the car departs its lane.
3. You can change the distance between the vehicle and the lane markings through sensibility adjustment.
(Refer to Set-up menu in Operation chapter)
4. If you want to turn off a function of LDW, you can disable in ADAS mode in Set-up menu in Operation.
5. LDW will not be activated if you turn on left or right blinkers.
(If the LDW is activated, please read the direction light connection of FAQ)
-14-
3.Function - 2) 2CH Dash cam
1. Normal mode: Records front and rear driving scenes simultaneously in real-time and recorded videos can be found in ory_rec folder.
If REC button shows blue color
, it indicates video is not recorded. So, please ensure that the icon is red before using.
2. Event mode: When the impact is detected by G-Force sensor, the videos 10 seconds before and after of the event are saved in
evt_rec folder.
3. Manual mode: If you press
on the screen, the videos are recorded for 30 seconds from the time and saved urs_rec folder.
4. Rear camera: Rear scene can be checked through optional camera and the rear screen can be checked by PIP
(Picture in Picture) through
button on the LCD of main body.(Press the PIP screen to switch into the full screen)
If the rear screen converts into the full screen in the PIP situation, LDWS should be not activated.
5. Recording time(Normal+Event videos) Users can change recording time in DVR Setting.
8G
6 hours
16G
13 hours
32G
26 hours
6. Recorded video play: You can play recorded videos through MDAS-10, MV(MDAS Viewer), VLC player, and players that play avi
files. (MV is included in SD card also it can be downloaded in Notice on www.mdas.co.kr. You can find the player in Notice board.)
7. MDAS DVR viewer works normally on computers with 2Ghz CPU and 2GB RAM.
8. File name can be expressed like ORY_20131201_205940_D (Type, date, time, D:dual S:single camera).
(ORY : Ordinary video recorded in real-time, EVT: Event video recorded, USR: Manual video)
Users can allocate recording spaces of the normal mode/event mode/manual mode and format the SD card.
* Icon explanation
SD card is not inserted
SD card has a problem
Voice recording is unavailable
Caution
Before inserting or separating micro SD card, please turn off MDAS-10. If you do not, the recording images can become corrupted.
It is recommended for micro SD card’s reliability to low-level format the SD Card periodically (approximately every 3-4 months).
-15-
3.Function - 3) Digital Tachograph
Digital Tachograph
1. MDAS-10 digital tachograph is designed in compliance with national standard and has obtained certification.
2. The driving information such as speed, mileage, time, RPM and GPS location can be transferred to MDAS-10 via
CAN or analog communication.
3. The driving information can be displayed after touching the DTG button as shown above.
4. DTG viewer needs to be downloaded from http://www.mdas.co.kr in order to check the stored driving information.
5. You can check the moving route and location in real time via Fleet Management Service by MOVON provided.
If you need the Fleet Managements Service, please call (+82) 2-2050-4676
6. All driving data can be recorded up to six months and the last ten seconds of the event data will be also recorded automatically.
-16-
4.Operation - 1) Set-up menu
Record Setting
The image shows all available menu settings. However,
You may have limited access to menu settings on MDAS-10.
Time Setting
Basic : Video quality and recording hour unit change.
Advanced : Ordinary or event recording On/Off.
Voice recording On/Off.
Memory : Memory-size setting for recording hours.
You can format SD card in this menu.
OSD Setting
Checking if GPS data/ time is functionoing and setting time.
-17-
Data/time, speed are displayed on MDAS-10’s LCD.
Select speed unit, Km/h or mph (Initial value is Km/h)
4.Operation - 1) Set-up menu
Tachograph Setting - 1
Tachograph Setting - 2
ID Number : Car VIN Number
Type : Car type
Registration : Car registration no.
Provider : Registration no. of Transport Operator
Calibration
If the current car data(Speed, RPM) is not correct, users
can modify changed values.
Tachograph Setting - 3
Driver Registration : Registering a driver
Driver Select : Selecting a driver
Driver Delete : Deleting a driver
Export : Exports driving information to an external device
Export Info : Exported Information
-18-
4.Operation - 1) Set-up menu
G-Force sensor setting
Change sensitivity of G-Force sensor. The lower numbers
in Step, the more sensitive.
LDW setting - 1
LCD’s display setting / MDAS-10’s Main Screen
Use auto off : Turns off the LCD display 1 minutes after MDAS-10
is powered on.
Use guide Line : Checks if LDW-related virtual Line is displayed.
LDW setting - 2
Setting for LDW-alerting sound.
Multiple choices available from A to C.
Sensitivity setting for LDW.
The closer each line is towards a car, the more sensitive.
-19-
4.Operation - 1) Set-up menu
Wi-Fi Setting - 1
Miscellaneous Setting
Enable WiFi : Checks if Wi-Fi is activated.
Firmware Update : Updates a Firmware.
Default Setting : Initializes MDAS-10.
-20-
Product Warranty
The warranty period applies from the date of purchase by the first customer and is transferable only between end-users.
The product warranty card and a copy of dated receipt “Proof of Purchase” are required. Otherwise,
MDAS-10 is not covered by the limited product warranty.
The warranty covers only manufacturing defects only which are occurred within warranty period.
Warranty Period / MDAS-10 : 1 year : 20,000Km / Movon-providing microSD card : 3 months
Movon-providing rear view camera : 6 months
Please download and back up all saved data before sending MDAS-10 to our After-sales Service center. We exclude all
liability for loss of data.
After-sales Service center location : Movon Corp. ( T. +82 (02) 2050 4640 )
We confirm this product warranty complies with Consumer Laws under Korea Consumer Agency.
Product Warranty Card
Model
MDAS-10
Serial No.
Purchasing Date
Customer
Seller
Name
Phone
Address
Name
Phone
Address
-21-
FCC Information to User
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is con-nected.
Consult the dealer or an experienced radio/TV technician for help.
Caution
Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation
IMPORTANT NOTE:
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be
co-located or operating in conjunction with any other antenna or transmitter.
NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY
RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
-22-

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Modify Date                     : 2014:05:16 17:27:26+09:00
Create Date                     : 2014:05:16 17:27:09+09:00
Metadata Date                   : 2014:05:16 17:27:26+09:00
Creator Tool                    : Adobe Acrobat 8.0 Combine Files
Format                          : application/pdf
Title                           : mdas10_menual_EN_1203-19 [Converted]1
Document ID                     : uuid:4b681951-2ed5-4403-97b1-829f0cd7d153
Instance ID                     : uuid:8c35bbd2-0841-41fc-b632-5e8137cd991d
Producer                        : Adobe Acrobat 8.0
Has XFA                         : No
Page Count                      : 23
Creator                         : Adobe Acrobat 8.0 Combine Files

EXIF Metadata provided by EXIF.tools