User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1103391 |
| Application ID | y0AKPDdNfi3Qeb8htI3UMA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 27.07kB (338409 bits) |
| Date Submitted | 2009-04-29 00:00:00 |
| Date Available | 2009-04-29 00:00:00 |
| Creation Date | 2009-02-19 12:53:43 |
| Producing Software | Adobe PDF Library 8.0 |
| Document Lastmod | 2009-04-29 09:28:58 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CS3 (5.0.2) |
BT229 Bluetooth® Headset User’s Guide Also in this package: AC (indoor) power adapter Extra ear cushion Questions? Problems? Get help on the web at www.uniden.com or call our Customer Service line at 800-292-2294. Getting to Know the Headset What the buttons do Button Multifunction (MFB) Quick Press (1 Beep) HEADSET STATUS Standby (No Calls Active) Incoming Call Last number redial Answer Call 2 seconds (2 Beeps) Initiate Voice Dialing Reject Call Turn Headset OFF Increase Volume Decrease Volume Turn Headset OFF Increase Volume Decrease Volume Action 4 Seconds (3 Beeps) Quick Press (1 Beep) Volume UP (+) 2 Seconds (2 Beeps) 4 Seconds (3 Beeps) Quick Press (1 Beep) Volume DOWN (-) 2 Seconds (2 Beeps) 4 Seconds (3 Beeps) 1 Call Active Close Call Transfer Active Call to/ from Phone Turn Headset OFF Increase Volume Hold/Resume Call Decrease Volume Microphone Mute Close/Resume Call Note: The headset initiates the function only after the button is released. * Specifications and features are subject to change without notice. What the LED colors mean Color State Steady Red Flashing Flashing One flash Blue every 5 seconds Two flash every 5 seconds Red & blue Alternating flash Meaning The headset is currently charging. When the battery is fully charged, the LED turns off. The headset is turned off. If the headset is also beeping, the battery is low. The headset is turned on. The headset is in standby and not paired to a Bluetooth device. The headset is currently paired to a Bluetooth device. The headset is in pairing mode. Setting Up Your Headset Charge the battery Before using your headset, charge the battery for at least 8 hours. Charging the battery completely (and keeping it charged) will help you get the longest possible talk and standby time out of the battery. Connect the adapter to the Power connector on the top of the headset, then plug it into any standard 120 V AC (regular indoor) AC outlet. Make sure that your headset is fully charged before you start using it. When your headset is charged, the red light is solid. When the battery needs to be recharged, you will hear warning beeps every 20 seconds and see the red light (depending on your headset status). Use ONLY the AC adapter supplied with the headset! Using any other adapter could damage your headset, create a fire hazard, or cause a risk of electric shock! Pair the headset to your Bluetooth phone Pairing is like “introducing” two Bluetooth devices and giving them permission to connect to each other. If you want to use the headset with more than one phone, you need to pair it with each phone separately. Once you pair a phone to the headset, the two devices can connect automatically whenever they can detect each other. Before you can use your headset, you must pair it with a Bluetooth-enabled device (such as Bluetooth mobile phone). 1: Make sure the headset is powered off and the power adapter is not connected (you can’t use the headset while it’s charging). 2: Press and hold MFB until the LED flashes alternating red and blue (approximately 6 seconds), then release. The headset is in pairing mode and should be visible to other Bluetooth devices. 3: Set your Bluetooth phone into discover mode. (Check the manual that came with your phone for instructions.) 4: When your phone asks if you want to pair with the headset, confirm this by pressing “yes” or “ok”. 5: When the phone asks for a passkey or PIN, enter 0000 (4 zeros). IMPORTANT! When the headset successfully pairs with a device, the red light flashes twice every 5 seconds. If pairing failed, the blue light flashes once every 5 seconds. Connecting to your phone Most phones connect to the headset as soon as you pair it; if yours won’t, turn the headset off and back on. If headset still won’t connect, check your phone’s owner’s manual for additional Bluetooth information. Once the headset is paired: ►► Whenever you turn the headset on, it will automatically try to connect to whatever device it was connected to last. ►► If the headset loses the connection (e.g., if your phone is out of range), it should reconnect automatically. To manually reconnect, press MFB. ►► If the headset goes more than 1 hour with no connection, it automatically turns off. Using Your Headset Turning headset on/off To: Follow these steps: Turn the headset on Press and hold the MFB for about 4 seconds. When you see the blue light flashing and hear the turn-on melody, release the button. Turn the headset off Press and hold the MFB for about 4 seconds. When you see the red light flashing and hear the turn-off melody, release the button. Put your headset on Insert the ear cushion, then wrap the earhook behind your ear. Everyone’s ear has a sweet spot, a particular angle of the speaker where the audio comes in loud and clear. Take a few minutes to move the headset around until you find the best angle for the ear cushion. Wearing the headset on your left ear If you want to wear the headset on your left ear, take the earhook off and turn it over. Available Features After the headset is connected, you can use the following features: Just make the call from your mobile phone as usual; your phone should automatically send the Make a call call to the headset. If your phone doesn’t, press and hold MFB for 2 seconds to send the call to the headset manually. Answer a call While the phone is ringing, press MFB. Ending a call Press MFB Reject an incoming While the phone is ringing, press and hold MFB for at least 2 seconds. Wait until you hear a beep call before you release the button. Press and hold MFB for 2 seconds to transfer the current call from your phone to headset (and Transferring a call back). With the phone in standby, press MFB. The headset automatically dials the last number you dialed Last number dialing from your phone. Note: Your phone must support voice dialing, and all voice commands must already be Using voice-activated programmed. With the mobile phone in standby, press and hold the MFB for 2 seconds. When you hear beep, release the button. Start using your phone’s voice commands. dialing NOTE: For best results, try recording your voice tags through your headset. Call-Waiting Note: To use this feature, you must subscribe to Call Waiting through your service provider, and your phone must support the hands-free profile. • To put your current call on hold and switch to a waiting call, press and hold Volume Up for about 4 seconds. Wait until you hear 3 beeps, then release the button; you’ll be connected to the waiting call. Press and hold Volume Up again to switch back to the current call. • To hang up your current call and switch to a waiting call, press and hold Volume Down for about 4 seconds. Wait until you hear 3 beeps, then release the button. Volume control & Mute function Use Volume Up and Volume Down to adjust the volume. To mute the microphone so the caller can’t hear you, press and hold Volume Down for 2 seconds. The headset plays a melody every 10 seconds to remind you the microphone is muted. To turn the microphone back on, press either Volume Up or Volume Down. 10 Multipoint Function The headset supports simultaneous connection with 2 mobile phones with full control of each one. Note: This feature may not be compatible with certain mobile phones. Pairing to more than one phone Pair the headset to the first phone following the instructions on page 6. When you hear a high-pitched, short double-beep, pair the headset to the second phone. Using both phones • The headset stays connected to both phones until a call comes in. If you answer the call, the headset automatically disconnects from the other phone while the call is active. When you hang up, the headset automatically reconnects to the other phone. Only one phone at a time can be on an active call. • The headset plays a different ring tone for each phone so you know which one is ringing. To answer the incoming call, press MFB as usual. All the button functions remain the same for the first phone (the one you paired first). 11 • To use last number redial on the second phone, press and hold Volume Down for about 2 seconds. (When you hear a beep, release the button.) • To activate voice dialing on the second phone, press and hold Volume Up for about 2 seconds. (When you hear a beep, release the button.) Troubleshooting and Maintenance If you have problems with the headset, see the suggestions in the table below. If these suggestions don’t help, contact customer support (see the cover for contact information). If... Try... The headset won’t turn on. -- Charging the battery completely. -- Making sure your phone is in pairing mode. Check your phone’s manual for instructions on The headset won’t pair with Bluetooth device pairing. -- Turning the headset off. Wait at least 10 seconds, then try again. my phone. -- Making sure your phone supports the Bluetooth Headset or Hands Free Profile. The headset paired with -- Making sure the call connected and is still active. my phone, but I can’t hear -- Making sure the phone transferred the call to the headset. Press and hold MFB for two seconds to transfer the call. anything through it. 12 The headset keeps beeping, -- The battery may be getting low. If the LED is blinking red, charge the battery. -- Seeing if your phone has lost the network signal. If your phone sounds an alert when it and I don’t know why. can’t connect to the network, the headset passes on this alert by beeping every 5 seconds. -- Turning the speaker volume up. I can hear the caller, but the -- Moving closer to your phone (if you aren’t carrying it). audio is very weak or soft. -- Keeping the battery fully charged; As the battery starts to run out, the speaker gets softer. General Information • You cannot use the headset while it is recharging. • Bluetooth wireless devices have a maximum range of 30 feet (10 m); the actual range will vary depending on current conditions (obstacles, battery power, interference, etc.). • The headset can be connected only to devices that support the Bluetooth headset or hands-free profile. This product is not compatible with standard cordless phones. Battery life With average use, the battery should provide about 9 hours of talk time and 8 days of standby time. A battery that is new or left unused for long periods of time can have reduced capacity the first few times it is used. For maximum battery life, keep your battery charged. • When the battery only has enough charge for about 15 minutes of talk time, the headset triggers a low battery alert: you’ll hear a periodic beep, and the LED changes from blue to red. • When the battery no longer has enough charge to operate the headset, the headset will power off; you won’t be able to turn it back on until you connect the charger or charge the battery. Noise or Static on the Headset The most common cause of noise or static on any wireless device is interference. Bluetooth devices operate in the ISM band (2.402 GHz ~ 2.480 GHz); any equipment operating in this frequency range might interfere with the headset. Some common sources of interference in this range are • Equipment that uses microwaves, especially microwave ovens • Wireless LAN equipment or WiFi connections 13 • Other Bluetooth devices or computers • Certain cordless telephones • Certain medical equipment and appliances If you have problems with static during calls, look for one of these interference sources. Try moving away from the suspected source. If the noise continues, there may be interference on your phone itself, and any noise in the phone’s connection will come through on the headset, too. Transfer the call to your phone and see if the audio quality improves. If it doesn’t, check around for things that might interfere with your phone. Safety and Handling Information For maximum product life, do not drop, throw, or crush the headset. Do not expose it to humidity, dust, or temperatures above 125 F. Cleaning the headset • If necessary, remove the earhook. Dampen a lint-free cloth with water or a cleaner specially designed for electronics, and gently wipe the headset clean. • Do not expose this product to liquid (water, alcohol, etc.) or submerse in liquid for any reason. 14 Important Safety Instructions Uniden America Corporation DOES NOT represent this product to be waterproof. To reduce the risk of fire, electrical shock, or damage to the product, DO NOT expose this product to rain or moisture. When using the headset, always follow basic safety precautions to reduce the risk of fire, electric shock and injury to persons, including the following: • Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. • Use only the power cord and batteries indicated in this manual. Do not expose the battery (or the device) to flames or dispose of it in a fire: the battery may explode. Check with local authorities for possible battery disposal instructions. • Do not disassemble, modify, or attempt to repair any component of this product. • Check the laws and regulations on the use of mobile phones and hands-free equipment in the areas where you drive. Always give full attention to driving and pull off the road and park before making or answering a call if driving conditions require. • Do not allow children to play with your headset since it contains small parts that could become detached and create a choking hazard. • Turn off your headset when pumping gas, handling flammable materials, or in any area with a risk of explosion. In rare occurrences, this product could generate sparks which can cause an explosion or fire. Follow all warning notices in your immediate area! • SAVE THESE INSTRUCTIONS! FCC Notice This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this product. To insure the safety of users, the FCC has established criteria for the amount of radio frequency energy various products may produce depending on their intended usage. This product has been tested and found to comply with the FCC’s exposure criteria. For body worn operation, the FCC RF exposure guidelines were also met when used with the Uniden accessories supplied or designed for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines and should be avoided. Industry Canada statement This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with IC RF exposure compliance requirements, please follow operation instruction as documented in this manual. Lithium-polymer battery information This device contains a lithium-polymer battery. The headset and battery must be recycled or disposed of properly. Contact your local waste management office for information on battery recycling or disposal. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15 Two-Year Limited Warranty Important: Evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants, for two years, to the original retail owner, this Uniden Product to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below. WARRANTY DURATION: This warranty to the original user shall terminate and be of no further effect 24 months after the date of original retail sale. The warranty is invalid if the Product is a) damaged or not maintained as reasonable or necessary, b) modified, altered, or used as part of any conversion kits, subassemblies, or any configurations not sold by Uniden, c) improperly installed, d) serviced or repaired by someone other than an authorized Uniden service center for a defect or malfunction covered by this warranty, e) used in any conjunction with equipment or parts or as part of any system not manufactured by Uniden, or f) installed or programmed by anyone other than as detailed by the owner’s manual for this product. STATEMENT OF REMEDY: In the event that the product does not conform to this warranty at any time while this warranty is in effect, warrantor will either, at its option, repair or replace the defective unit and return it to you without charge for parts, service, or any other cost (except shipping and handling) incurred by warrantor or its representatives in connection with 16 the performance of this warranty. Warrantor, at its option, may replace the unit with a new or refurbished unit. THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. LEGAL REMEDIES: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This warranty is void outside the United States of America and Canada. PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the instructions in the owner’s manual you are certain that the Product is defective, pack the Product carefully (preferably in its original packaging). The Product should include all parts and accessories originally packaged with the Product. Include evidence of original purchase and a note describing the defect that has caused you to return it. The Product should be shipped freight prepaid, by traceable means, to warrantor at: Uniden America Service 4700 Amon Carter Blvd. Fort Worth, TX 76155
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Instance ID : uuid:5e0619ef-1ee4-4198-8825-b6f39079fc9b Document ID : adobe:docid:indd:eca4d250-f9b6-11dd-8d38-9c3a8d9f6e78 Rendition Class : proof:pdf Derived From Instance ID : eca4d24f-f9b6-11dd-8d38-9c3a8d9f6e78 Derived From Document ID : adobe:docid:indd:eca4d24a-f9b6-11dd-8d38-9c3a8d9f6e78 Manifest Link Form : DirectStream, ReferenceStream, DirectStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 300.00, 300.00, 304.00, 300.00, 300.00, 300.00, 300.00, 300.00 Manifest Placed Y Resolution : 300.00, 300.00, 304.00, 300.00, 300.00, 300.00, 300.00, 300.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:509C48778205DD11889B9D11DC45C437, uuid:B8305167B6F9DD11BEB9A98A4CEE0777, uuid:9E9235B18005DD11889B9D11DC45C437, uuid:48A75733B6F9DD11BEB9A98A4CEE0777, uuid:464972A7B8F9DD11BEB9A98A4CEE0777, uuid:854645A8BEF9DD11BEB9A98A4CEE0777, uuid:4B76DCD7BBF9DD11BEB9A98A4CEE0777, uuid:4776DCD7BBF9DD11BEB9A98A4CEE0777 Manifest Reference Document ID : uuid:9DC784177F05DD11889B9D11DC45C437, uuid:B4305167B6F9DD11BEB9A98A4CEE0777, uuid:969235B18005DD11889B9D11DC45C437, uuid:47A75733B6F9DD11BEB9A98A4CEE0777, uuid:454972A7B8F9DD11BEB9A98A4CEE0777, uuid:844645A8BEF9DD11BEB9A98A4CEE0777, uuid:4A76DCD7BBF9DD11BEB9A98A4CEE0777, uuid:A780302FBAF9DD11BEB9A98A4CEE0777 Create Date : 2009:02:19 12:53:43+01:00 Modify Date : 2009:04:29 09:28:58+09:00 Metadata Date : 2009:04:29 09:28:58+09:00 Creator Tool : Adobe InDesign CS3 (5.0.2) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 8597 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 8.0 Trapped : False Page Count : 16 Creator : Adobe InDesign CS3 (5.0.2)EXIF Metadata provided by EXIF.tools