MPOW TECHNOLOGY BH045B 2-in-1 Bluetooth Transmitter/Receiver User Manual BH045B 0307

MPOW TECHNOLOGY CO., LIMITED 2-in-1 Bluetooth Transmitter/Receiver BH045B 0307

user manual

Download: MPOW TECHNOLOGY BH045B 2-in-1 Bluetooth Transmitter/Receiver User Manual BH045B 0307
Mirror Download [FCC.gov]MPOW TECHNOLOGY BH045B 2-in-1 Bluetooth Transmitter/Receiver User Manual BH045B 0307
Document ID4203461
Application ID6Yi7K1Tx4yQVkFMDy1pG2w==
Document Descriptionuser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize32.51kB (406347 bits)
Date Submitted2019-03-17 00:00:00
Date Available2019-03-17 00:00:00
Creation Date2019-03-12 14:15:03
Producing SoftwareAcrobat Distiller 9.3.2 (Windows)
Document Lastmod2019-03-12 14:15:03
Document TitleMicrosoft Word - BH045B(0307)
Document CreatorPScript5.dll Version 5.2.2
Document Author: Administrator

1.Important Notice
For “no lip sync delay” when watching TV, movie or playing games.
Make sure you use a Bluetooth device supporting aptX Low Latency (aptX LL), since most audio
receiver devices (Bluetooth headphone, Bluetooth speaker) don’t support this technology.
If your Bluetooth headphone / Bluetooth speaker supports aptX Low Latency (aptX LL), you can
enjoy better experience which is synchronized between the sound and video screen. If your
Bluetooth headphone / Bluetooth speaker doesn’t support aptX Low Latency (aptX LL), you may
feel the lip sync delay between the sound and video screen.
aptX Low Latency (aptX LL) certified products:
https://www.aptx.com/zh‐hans/products?
Codec of one connected device
Your Headphone supports
the final transmission Codec
will be
The audio delay will be
aptX Low Latency
<~40ms
aptX
aptX
<~130ms
SBC
SBC
<~220ms
aptX Low Latency
Codec of two connected devices
Your First Headphone
supports
Your Second
Headphone supports
The final transmission
Codec will be
The audio delay
will be
aptX Low Latency
aptX Low Latency
<~40ms
aptX
aptX
aptX
<~130ms
aptX Low Latency /
aptX /SBC
SBC
SBC
<~220ms
aptX Low Latency
aptX
SBC
<~220ms
aptX Low Latency
Codec of two connected devices
Your First Headphone
supports
aptX Low Latency
aptX
aptX /SBC
Your Second
Headphone supports
the final transmission
Codec will be
The audio delay
will be
aptX Low Latency
aptX
<~40ms
aptX
aptX
<~70ms
aptX Low Latency
SBC
<~220ms
aptX
SBC
Low
Latency/
aptX
SBC
<~220ms
aptX
aptX
Low
Latency/
SBC
SBC
<~220ms
2.About aptX/ aptX Low Latency
aptX can give you consistent, high‐quality audio over Bluetooth device.
aptX Low Latency ensures your Bluetooth wireless enabled device can deliver sound in sync with
visuaal media. Witth aptX Low Latency you ccan enjoy the
e freedom off wireless for applications such
as gaaming and waatching video
os.
Diaagram
1. Po
ower ON / OFFF;multi‐fun
nction buttonn: Pause / plaay, Answer / Hang
up
2. In
ndicator Light
3. Next track / Vo
olume Up
4. Prrevious track / Volume Do
own
5. M
Microphone
6. USSB Charging port
7. TX
X / RX:Bluettooth Receive
er mode(RXX)/ Bluetootth Transmitte
er mode(TX )Switch
8. Blluetooth Pairing button
9. Au
udio Input / Output
port
4.
Speecification
ns
Prod
duct name: BH045
Conn
nection techn
nology: Bluettooth
Freq
quency range: 2.402 GHz~
~2.480 GHz
Blueetooth protoccol: HFP / HSP
P / A2DP / AV
VRCP
Battery capacity: 180 mAh
Worrking currencyy: ≈15 mA
Charrging voltage: DC 5.0 V
Temperature range: 0‐45 / 32‐
3 113
5.C
Charging
BH045 has a built‐in battery, which
can bee charged witth a 5 V stand
dard charger. If a non‐stan
ndard
charrger is used to charge, BH
H045 will triggger self‐prote
ection and won’t charge bbattery. When a 5
V staandard chargger is used aggain, BH045 w
will resume charging.
When charging, the red indicator
lightt will remain on;
o When fullly charged, thhe red indicator light will go off autom
matically.
6.P
Power ON / OFF
ON: Long press
button for 3 seconds tto turn on BH
H045. In RX mode,
Blue i ndicator light will
flash
h quickly. In TX
T mode, Grreen indicato r light will flash quickly iff without pa iring informa
ation;
and will flash slow
wly for 30 secconds and th en flash quickly if with pairing informaation.
OFF:: Long press
button for 3 seconds.
7.C
Choose a Bluetooth
Mode
TX: TTurn the switch to “TX” to
o enter Bluetoooth transmittter mode.
RX: TTurn the swittch to “RX” to
o enter Bluetoooth receiverr mode.
8.In
nstruction
ns on Blue
etooth Recceiver / Trransmitter mode
8.1 C
Can I hear the video soun
nd from the N
Non‐Bluetootth TV via the Bluetooth heeadphone?
Yes, you can. BH0
045 Bluetooth
h TX mode suupports. Turn
n the switch to
o “TX” side too enter Bluettooth
Tran
nsmitter mode.
Conn
nect BH045 to
t a Non‐Blue
etooth TV (coomputer) with
h a cable. The
en, pair BH0445 to a Blueto
ooth
head
dphone (Blueetooth speake
er) via Bluetoooth. Then, yo
ou can hear the audio from
m the
Non‐Bluetooth TV
V (computer)) via a Bluetoooth headpho
one (Bluetootth speaker).
For m
more details, refer to the following insttructions in 9.
8.2 C
Can I play mu
usic via a Non
n‐Bluetooth iin‐car speake
er from a sma
artphone?
BH045 Bluetooth
h RX mode supports. Turn the switch to
o “RX” side to
o enter Bluetoooth RX mode.
Conn
nect BH045 to
t the Non‐Bluetooth in‐caar speaker (an old‐style Non‐Bluetoothh speaker or
head
dphone) with
h a cable. Pairr BH045 to a ssmartphone (iPad) via Blu
uetooth. Thenn, you can listten
to m
music from thee smartphone (iPad) via thhe Non‐Bluettooth in‐car speaker
(Non‐‐Bluetooth
old‐sstyle speakerr or headphon
ne).
For m
more details, refer to the following insttructions in 10.
9.B
Bluetooth TX Mode
Conn
nect BH045 to a Non‐Blu
uetooth multtimedia audio device (such as TV, PCC) with a 3.5
5 mm
audiio cable, optical cable or RCA
R cable. Thhen, pair BH0
045 to a Blue
etooth headpphone / Bluettooth
speaaker. In this way,
w BH045 can
c transmit music from a Non‐Blueto
ooth multimeedia audio device
(such as TV, PC) to
t a Bluetooth
h headphonee / Bluetooth speaker etc...
9.1 P
Pair with One
e Bluetooth Headphone
Step
p 1: Connect BH045
to the Audio outpuut port of a Non‐Bluetooth
h multimediaa audio device
(such as TV, PC) with
w a 3.5 mm
m audio cablee or RCA cable
e.
Step
p 2: Select a mode:
turn th
he switch to ““TX” to enter Bluetooth TX
X mode.
button for 3 seconds with
Step
p 3: Power on
n BH045 by lo
ong pressing
w Green inndicator light
flash
hing quickly.
Step
p 4: Pair. Wheen the Green indicator lighht flashes quickly, BH045 will
w enter Blueetooth pairin
ng
mod
de (Short presss
button to enter parring mode).
Step
p 5: Enable Bluetooth on Bluetooth
heaadphone / Blu
uetooth spea
aker. Get it cloose to BH045
with
hin 1 meter. Itt takes 5‐30 seconds to coomplete the automatic
con
nnection to thhe Bluetooth
head
dphone / Bluetooth speakker.
After the successsful pairing, BH045
Green indicator ligh
ht will remain
n on. And thee codecs of BH
H045
will cchange accorrding to the Bluetooth
heaadphone as below.
Codec of oonly one con
nnected devicce
You
ur Headphon
ne supports
The final tra
ansmission
Codec will
w be
The auudio delay will
w be
aptX Low Latency
< ~40ms
apttX
apttX
< ~130ms
SBC
SBC
< ~220ms
apttX Low Latenccy
Step
p 6: Play musiic / video on your
computter or televisio
on. Then, you
u can enjoy yo
your time.
9.2 C
Connect with
h Two Bluetooth Headphoones
Step
p 1: Completee the connecttion to the firrst Bluetooth headphone / Bluetooth s peaker.
Step
p 2: Short press
flash
hing quickly.
butto
on to enter Blluetooth pairring mode witth Green indiicator light
Step
p 3: Enable Bluetooth on the second Bl uetooth head
dphone or Bluetooth speaaker etc. Get it
close to BH045 within 1 meter. It takes abbout 5‐30 secconds to complete the auttomatic
con
nnection to BH045.
After the successsful connectio
on, Green inddicator light re
emains on. The codecs of BH045 will
chan
nge accordingg to the two Bluetooth
he adphones as below.
Codec of Two Connected Devices
Yourr First Headp
phone
supp
ports
Your Secondd
Hea
adphone suppports
he final transsmission
Th
Codec will be
The audio delay
will be
aptX Low Lateency
aptX
< ~40 ms
aptX
aptX
< ~70 ms
aptX Low Lateency
SBC
< ~220 ms
aptX
X Low Laten
ncy /
SBC
aptX
SBC
< ~220m
ms
aptX
X Low Laten
ncy /
aptX
SBC
SBC
< ~220m
ms
aptX
X Low Latencyy
aptX
aptX
X / SBC
9.3 P
Play Music
Play / Mute: Shorrt press
button.
ume up: Longg press or short press “+” bbutton (MAX volume without a sound prompt).
Volu
Volu
ume down: Lo
ong press or short
press “‐‐” button (MIIN volume without a sounnd prompt).
10.Bluetooth
h Receiverr Mode
10.11 Connect witth One Smarttphone
Step
p 1: Connect BH045 to a Non‐Bluetoot
th in‐car speaaker, speaker or headphonne with a 3.5
5 mm
audiio cable or RC
CA cable.
Step
p 2: Select a mode.
Turn th
he switch to ““RX’ side to enter Bluetooth receiver m
mode.
Step
p 3: Power on.
o Long presss
buttonn for 3 secon
nds to powerr on with Bluue indicator light
flash
hing quickly.
Step
p 4: Pair. Wheen the Blue indicator lightt flashes quicckly, BH045 will
w enter paiiring mode (SShort
presss
button
n to enter paiiring mode).
Step
p 5: Enable Bluetooth on your smartp hone. Search
h “BH045” an
nd click to coonnect. If nee
eded,
inpu
ut the passwo
ord “0000”.
After the connecction, Blue indicator light will remain on.
o The code
ecs will be sh own according to
the ssmartphone. If the smartp
phone codec is “APTX”, the codec of BH
H045 is “APTXX”.
Step
p 6: Play musiic on your sm
martphone an d begin to lissten to music.
10.22 Connect witth Two Smarttphones
Step
p 1: After thee connection to the first s martphone, short press
button too enter Bluettooth
parin
ng state with Blue indicato
or light flashi ng quickly.
Step
p 2: Enable Bluetooth
on the second smartphone
e. Search “BH
H045” and cl ick to conne
ect. If
need
ded, input the password “0000”.
“
Step
p 3: After thee connection, the Blue inndicator lightt remains on. Then, two smartphoness will
conn
nect to BH04
45 simultaneously. The coodec will be same as tha
at of the sm
martphone pla
aying
mussic. If the smaartphone playying music is oof APTX mode, the codec of BH045 willl be “APTX”.
10.33 Handsfree Call
C Function
Answ
wer a Call: Sh
hort press button.
Hangg up a Call: Short press button.
Rejeect a Call: Lon
ng press bu
utton for 1 seecond.
Rediial a Call: 1..Double presss
button to redial the
e last phone
e number diialed on the first
smartphone.
2.Double presss
button tto redial the last phone number dialeed on the se
econd
smartphone.
Swittch the Call: During
the ca
all, long presss
button fo
or 1 second to
t change thee device betw
ween
the ssmartphone and BH045.
A call is incomingg during the call:
1.Sh
hort press button to hang up the currrent call and
d answer an in
ncoming call..
2.Lo
ong press button
to ansswer an incom
ming call and put the curre
ent call on hoold.
Betw
ween the Two
o Calls:
1.Sh
hort press button to hang up the currrent call and
d switch to the other call.
2.Lo
ong press button
to switch between two smartph
hones.
10.44 Voice dialing
Longg press bu
utton for abo
out 1 secondd, and release the butto
on when youu hear the sound
prom
mpt to enablee or disable voice
dialing ffunction.
10.55 Play Music
Play / Pause: Sho
ort press
button.
Nextt track: Shortt press “+” bu
utton.
Prevvious track: Sh
hort press “‐”” button.
Volu
ume up: Longg press “+” bu
utton (MAX voolume with a sound prompt).
Volu
ume down: Lo
ong press “‐” button (MIN volume with
h a sound pro
ompt).
11.Enter Pairring mode
1.If only one Blu
uetooth devicce is connectted to BH045
5, short presss
mod
de (RX or TX indicator lightt will flash quuickly).
buttonn to enter pa
airing
2.Lo
ong press
button for 3 seconds too disconnectt from the cu
urrent devicees. Blue indicator
lightt (RX) or Greeen indicator liight (TX) will fflash quickly to enter pairing mode.
12.Reconnecction
1.RX
X Mode Reconnection
Reco
onnection aftter power on
n: Enable Blueetooth on yo
our smartphone. Then, turrn on BH045 with
Bluee indicator ligght flashing quickly.
Then,, BH045 will reconnect to the last connnected Bluettooth
device. The recon
nnection lastss 30 seconds . If the device
e fails to reco
onnect withinn 30 seconds. Click
“BH0045” on yourr smartphone
e manually too connect.
Exceeeding Blueto
ooth distance
e: If the devvice exceeds Bluetooth distance, the Bluetooth will be
disco
onnected. An
nd BH045 will reconnect with Blue ind
dicator light flashing slow
wly. If no device is
conn
nected in 20 minutes, BH0
045 will poweer off automaatically.
2.TX
X Mode Recon
nnection
Reco
onnection aftter power on: With your B
Bluetooth headphone pow
wering on firsst, turn on BH045
and its Green ind
dicator light will flash sloowly. Then, BH045 will recconnect to thhe last conne
ected
device. The recon
nnection lasts 30 s. After 330 seconds, it enters pairing mode witth Green indicator
lightt flashes quickly.
Exceeeding Blueto
ooth distance: If the devic e exceeds the Bluetooth distance,
the Bluetooth will
w be
disco
onnected. An
nd BH045 will reconnect aautomaticallyy with Green indicator lighht flashing slowly.
If no
o device is con
nnected in 10
0 minutes, BH
H045 will pow
wer off autom
matically.
13.Erase Bluetooth Pa
airing Info
ormation
Step
p 1: In power‐‐on state, lon
ng press
button for 8 seconds until the Red ind icator light co
omes
out twice. BH045
5 will erase the paired devvices and enter Bluetooth
h pairing modde. Blue or Green
indiccator light will flash quicklly.
Step
p 2: Please erase
the Blluetooth pai ring informaation simultaneously (Pleease refer to
o the
instrructions on how to erase pairing
inform
mation on your smartphon
ne or Bluetoooth headphon
ne).
14.Low Batte
ery Warning
Wheen the batteryy is below 3.3
3 V, BH045 w
will alarm auto
omatically. Th
he Red indicaator light will flash
quicckly every two
o minutes. With
W battery ussed up, BH04
45 will power off automatiically.
15.Auto‐Shu
ut Off
1.If there is no
o Bluetooth device connnected after BH045 po
owers on, itt will power off
auto
omatically aftter 10 minute
es.
2.If tthe connecteed device excceeds the effeective Blueto
ooth distance for about 200 minutes, BH045
will power off au
utomatically if no Bluetoooth device is connected (In Bluetooth TX mode, BH045
will power off aftter 10 minute
es).
Waarning
The product con
ntains batterry. During thhe operation
n, please pay attention to the follo
owing
inforrmation:
1.Accceptable opeerating tempe
erature rangee: 0‐45 / 32‐ 113 .
2.Pleease avoid ussing or chargging it in highh temperaturre, low temperature or sttatic environment
(such as cars exp
posed to dire
ect sunshine in hot weath
her, fire, surfface with hig h temperature or
extreeme cold en
nvironment). Otherwise, it may influe
ence the performance oor lifespan off the
battery.
3.Ch
harge it via a STANDARD
5 V charger.
4. Pu
ut it in a shad
de when not in
i use.
Any issues duringg usage, pleasse contact suupport@xmpo
ow.com to ge
et professionaal services.
Tro
oubleshoo
oting
Whyy BH045 can’tt be charged?
Step
p 1: Check wh
hether you are using a stanndard 5 V chaarger.
Step
p 2: Check wh
hether two en
nds of the USSB charging caable have bee
en connectedd firmly.
Step
p 3: Try anoth
her power outtlet or USB chharging cable
e.
BH045 无法开机
机?
Whyy can’t BH045
5 be turned on?
Step
p 1: Check wh
hether BH045 has power.. Ensure thatt BH045 has power, try chharging again
n and
pow
wer on again.
Step
p 2: Check wh
hether BH045
5 has been tu rned on (Long press
button for 3 seeconds).
Whyy can’t BH045
5 be paired?
Step
p 1: Please en
nsure that BH045 has beenn turned on.
Step
p 2: Please ch
heck whetherr you’ve seleccted a proper Bluetooth mode.
Turn t he switch to “TX”
side and the Greeen indicator light flashees quickly; Tu
urn the switcch to “RX” sside and the Blue
indiccator light flashes quickly.
Step
p 3: Check wh
hether BH045 is in pairinng mode (Gre
een or Blue indicator lightt flashes quickly).
Shorrt press bu
utton to enter pairing modde.
Step
p 4: In RX mode, check whether
yourr smartphone can search
h the Bluetoooth name. Iff not,
disable and enab
ble Bluetooth
h on your sm
martphone. In
n TX mode, check
whetheer your Bluettooth
head
dphone is in pairing mode
e. If not, set tthe Bluetooth
h headphone
e to pairing m
mode according to
its in
nstructions.
Step
p 5: Long preess
for 8 seconds to cclear the parring information on BH0445 and try pa
airing
again.
Clear the Bluetoo
oth pairing lisst on the smaartphone and
d Bluetooth headphone
bby the instrucctions
of th
he smartphon
ne or Bluetoo
oth headphonne.
Takee Bose QC 35
5 II for examp
ple, turn the switch to the Bluetooth icon. Long prress for 10 s until
you hear “Bluettooth device list cleared”” (Bluetooth
h pairing list have been erased) and
d the
Blueetooth indicattor light flash
hes in blue.
Whyy is the musicc quality poo
or?
Step
p 1. Ensure tw
wo ends of the 3.5 mm cabble are firmlyy connected.
Step
p 2. Check wh
hether the AU
UX cable is fullly plugged in
n.
Step
p 3. Change a 3.5 mm audiio cable.
Step
p 4. Try anoth
her Non‐Bluettooth device.
Whyy is the conne
ection short‐distanced annd intermittent?
Blueetooth is a sho
ort‐distanced
d wireless tecchnology. Wh
hen too much
h obstructionss are nearby, such
as Bluetooth devvices, wirelesss signals, wallls, they will disturb
the tra
ansmission.
Step
p 1: Maybe th
he device excceeds the Bluuetooth distaance. Come back
to the eeffective dista
ance.
Mayybe it’s obstru
ucted by the wall,
w please uuse BH045 in a spare place
e.
Step
p 2: The wireeless signal will
w disturb thhe Bluetooth
h connection. Please use the BH045 in an
environment without strong obstruction.
Whyy is the volum
me so low wh
hen listening to music?
Step
p 1: Confirm whether
two ends of the aaudio cable are firmly connected.
Step
p 2: Increase the
t volume on
o BH045, sm
martphone and speaker etcc.
Step
p 3: Change another comp
patible devicee.
Whyy there is no sound after the
t successfuul connection
n?
Step
p 1: Check wh
hether the vo
olume of youur computer, TV, or Blueto
ooth headphoone and BH0
045 is
high
h enough.
Step
p 2: Check wh
hether the cable is firmly cconnected.
Step 3: Check whether the audio cable is complete.
Step 4: In TX mode, check whether the TV has sound with a wired headphone. If not, adjust the
audio output to “headphone” for the television.
Step 5: Change an audio cable and check whether it has sound.
Why can’t BH045 be connected to my television in Bluetooth TX mode?
Confirm whether your television has an audio output. Connect the audio cable or RCA cable to
the audio output port of the television.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
NOTE: Any changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 2019:03:12 14:15:03+08:00
Modify Date                     : 2019:03:12 14:15:03+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : Administrator
Title                           : Microsoft Word - BH045B(0307)
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.3.2 (Windows)
Document ID                     : uuid:4da375cf-c43f-41cd-8c47-688c04d0dda2
Instance ID                     : uuid:4a438998-86b8-4dd7-b372-9a9af41a65df
Page Count                      : 10
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AMH2-BH045B

Navigation menu