MPOW TECHNOLOGY BH286A 2-in-1 Bluetooth Transmitter/Receiver User Manual BT4852B V01

Download:
Mirror Download [FCC.gov]
Document ID	3912567
Application ID	ubrk/ZIk17vvo9LjP6qiug==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	15.84kB (198033 bits)
Date Submitted	2018-07-05 00:00:00
Date Available	2018-07-05 00:00:00
Creation Date	2018-07-03 14:53:26
Producing Software	Acrobat Distiller 9.3.2 (Windows)
Document Lastmod	2018-07-03 14:53:26
Document Title	Microsoft Word - BT4852B说明书 V01
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

BBluetootth SPDIF & Auxx Transm
mitter and Recceiver 2-in-1
Useer Manual
Specificcations:
Bluetoothh Version: 3.0
Output Power Categgory: Class2
Bluetoothh Protocol: A2DP/AV
VRCP/APTX//APTX-LL
Bluetoothh Range: up
u to 30 feet
Battery: Li-Polymeer 450mAh
Charge Voltage: DCC 5.0V
Product Diagram
1. Multifunction Button：Power ON/OFF; Pause/Play
2. Next Song/Volume Up
3. Previous Song /Volume Down
4. Pairing Switch
5. Indicator Light
6. USB Charge
7. Audio Output/In
8. SPDIF In
9. SPDIF Out
10. Receiver/Transmitter Switch
11. SPDIF /Aux Audio Switch
Power On
Long press the Multifunction button about for 3 seconds, the blue light will flash in
receiver mode; green light will flash in transmitter mode.
Power Off
Long press the Multifunction button about 3 seconds.
TX & RX
TX : Transmitter mode, work as Bluetooth Transmitter. In transmitter mode, it can only
pair with your Bluetooth headsets or speakers. It can’t pair with Bluetooth enable phones,
MP3, tablets, etc.
RX : Receiver mode, work as Bluetooth Receiver. In receiver mode, it can only pair with
your Bluetooth enable phones, MP3, tablets, etc.
Note: Please select the mode first and then turn on the product.
Mode Switch:
You can switch the TX Mode to RX mode or the other way around, the bluetooth adapter
will reboot automatically, to finish the RX/TX Mode Switching.
SPDIF & AUX
SPDIF: Stereo Digital Audio.
AUX: Stereo Analog Audio.
Audio Switch:
You caan switch the SPDIF Mode to Auux Mode or the other
r way arounnd, the blu
uetooth addapter
will automaticallyy finish the SPDIF//AUX Mode Switching
g.
Rece
eiver Mode
Make sure you have
turne
ed the swiitch to th
he ‘RX’ side befo re you pow
wer it on. Then
it will wwork as Bluetooth receiver.
Instructtion
1. Connect the deviice to aud
dio port oof your headphone/Home Speakeers or Car
r Stereo System
with 3.5mm audio cable; or
r connect the SPDIF
F out port
t of devicce to your
r Home Speeakers
with optical fibber cable.
2. Pair the receivver to you
ur smart ddevice.
3. Now youu can enjooy your music througgh your He
eadphone, Speakers, Home Ster
reo Systemm/ Car
Stereo System.
Pair
r to your smart device:
1. Turn the switchh to the ‘RX’ sidde.
2. Long prress the Muultifuncti
ion buttonn for about
t 3 seconds, the bluue light fl
lashes quiickly,
it will enter pairring mode.
3. Turn on the Bluuetooth fu
unction off your sma
art device
e.
4. Searchh for the Bluetooth
h device " BH286A "and
conne
ect.
5. Enter the code "0000" if
f needed.
6. If it pairs succcessfully
y, the bluue indicat
tor will stay
on.
Conn
nect Two Smart Devices
1. Pair the Bluetoooth receiver to thhe first smart
devi
ice.
2. After ppairing suuccessfull
ly, short press the
e button “
”, itt will ent
ter the paairing
state agaain, the blue
light will flaashs quick
kly.
3. Turn on the Bluuetooth fu
unction off your sec
cond smart
t device.
4. Searchh for the Bluetooth
h device " BH286A "and
conne
ect.
5. Two smmart devicces will pair
to itt simultan
neously.
Note:
1. The recceiver willl connect
t to the laast connec
cted devic
ce automattically when it turnns on.
(Please mmake sure enable the Bluetootth functio
on of your
r device iis turned on beforee turn
on the receiver.)
2. If you want to disconnect the paireed smart device and connect aanother smart devicee, you
can long ppress the button”
” aboutt 3 second
ds, it will
l turn intto pairing
g mode, thee blue
light will flash quickly.
Play
y Music
1. Play/PPause: Shoort press the Multiifunction button
2. Next Song: Shorrt press the buttonn “>”
3. Previous Song: Short pre
ess the buutton “<”
”
4. Volume Up: Longg press th
he button “>”
5. Volume Down: Loong press the buttoon “<”
Tran
nsmitter Mode
Make sure you have
turne
ed the swiitch to th
he ‘TX’ side befo re you pow
wer it on, then
it will wwork as a Bluetooth
h transmittter.
Instruction:
1. Pair the devicee to your Bluetoothh headphon
nes or Blu
uetooth Sppeakers.
2. Connect the audiio port or
r SPDIF inn port of device to your non--Bluetooth
h media deevices
(Such as CCD/DVD player, TVs, etc) via 33.5mm audi
io cable or
r RCA cablee or optic
cal fiber cable.
3. Now you can enjoy your music
via Bluetooth
h speakers
s/Bluetootth headset
ts from yoour
non-Bluetooth media device!
Pair
r to your Bluetoooth spea
akers/Bl uetooth headsets:
1. Turn thhe switch to the ‘TX’ sidee, and the
en long pr
ress the MMultifunct
tion buttoon for
about 3 seconds too power it on.
2. After ppower it on,
o short press
the button “
”. It will enteer pairing
g state, annd the
green ligght will flashs
quickly.
3. Turn onn your Bluuetooth sp
peaker or Bluetooth
h headset,
, make surre the ran
nge is witthin 1
meter to the transmitter, wait
for 110-15 seco
onds, it will
pair automatic
cally.
4. If pairing succcessfully, the greeen indicat
tor will stay
on.
Pair
r to Two Bluetoooth speak
kers/Bluuetooth headsets
1. Pair it to the first Blu
uetooth Sppeaker/Blu
uetooth he
eadset;
2. After ssuccessfull pairing, short preess the but
tton “
”, it willl enter th
he pairing state
again, thhe green light will flashs qquickly.
3. Turn onn your secoond Blueto
ooth speakeer or Bluetooth head
dset, makee sure the range is within
1 meter to the traansmitter, wait forr 10-15 se
econds, it
t will paiir automat
tically.
4. Two Bluetooth speakers/B
Bluetooth headsets will pair
r to it siimultaneou
usly.
Note:
1. If succcessfully paired to
o the Blueetooth speaker/Bluetooth heaadset for the
t first time,
when you ppower on the
t device
e next timme, it will reconnect with thhe last pa
aired Blueetooth
speaker/BBluetooth headset automatica
ally.
2. If you want to disconnect
t the pairred Blueto
ooth speak
ker/Bluetoooth heads
set and coonnect
another Bluetooth speaker/Bluetooth headset, you can long presss the button”
” about
he green light
willl flash qu
uickly.
3 seconds, it will turn into pairingg mode, th
Play
y Music
1. Mute on/off: Shhort press the buttton Multif
function button
2. Volume Up: Longg press or
r Short prress the button
“
”
3. Volume Down: Loong press or Short press the
e button “ ”
Note：In ooptical fiiber trans
smission mmode, the volume
can
nnot be coontrolled by
b pressinng the
button.
Low Battery warningg
When tthe devicee is in low
w battery sstate, it will alarm
m automatiically tha
at the red light
will flashing quicckly it will power off autom
matically if the poower runs out.
Clea
ar Bluetooth Connnection List
Long press the Pairing Switch
“
” for about 8 se
econds tilll the red
d light fllashes
twice. Aftter powereed on, it will cleaar the pair
ring lists
s that havve paired before,
thhen it
will turnn into pairing mode
e.
Char
rge the device
1. When the device is in low
w battery state or lack of battery,
pplease cha
arge it thhrough
USB chargee port witth DC 5V po
ower supplly input, during
cha
arging thee red indicator willl stay
on. When charging finished, the red indicator
r will go off.
2. Please use the micro USB
B cable too charge the
t device
e.
Note:
1. Please charge it in time
e when in low batte
ery state.
2. If you don’t usse it regularly, pl ease charg
ge it ever
ry 3 monthhs, in case it won'tt work
normallyy or damagge the battery.
Trou
uble Shooting:
Q1: The pproduct caan’t pair
r with youur Bluetoo
oth enable
ed phone, MP3, etc.
1. Please make suree you have
e turned thhe switch to the ‘RX’ sidee before you power it
i on.
2. Clear the parinng list of
f your Bluuetooth en
nabled pho
one, MP3, etc. then
n try agaiin.
Q2: The pproduct caan’t pair
r with youur Bluetoo
oth speake
ers/Bluetoooth headsets.
1. Please make suree you have
e turned thhe switch to the ‘TX’ sidee before you power it
i on.
2. Make suure there is only on
ne Bluetootth speaker
r or Bluetooth headsset turned
d on aroundd you.
3. Clear the parinng list of
f the prodduct, then
n try agai
in.
Q3: The BBluetooth range or the soundd quality is not go
ood.
1. Bluetooth signal can be blocked
byy surround
ding objec
cts and reeduce the audio quaality,
please putt it in thee right pos
sition witthout barrier betwee
en adapterr and your phone (or other
devices).
2. Clear the parinng list of
f the prodduct, then
n pair aga
ain.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 2018:07:03 14:53:26+08:00
Modify Date                     : 2018:07:03 14:53:26+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : Administrator
Title                           : Microsoft Word - BT4852B说明书 V01
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.3.2 (Windows)
Document ID                     : uuid:3e13d4dc-fc18-4f0b-b133-6a415c2323f2
Instance ID                     : uuid:2fd82012-6a0a-4927-b062-902e33ca9221
Page Count                      : 7

EXIF Metadata provided by EXIF.tools