MPOW TECHNOLOGY BMBH143C Bluetooth Headphone User Manual BMBH143C B2B v01 180709

MPOW TECHNOLOGY CO., LIMITED Bluetooth Headphone BMBH143C B2B v01 180709

15_BMBH143C UserMan

Make sure the Bluetooth on the mobile device you are trying to connect the headphones to is on.Hold the “ ” button for 6 seconds to enter pairing mode. The red and blue indicators will start flashing.In your devices Bluetooth list, search for ‘MPOW X4.0’, click on it, and your devices will pair.The headphone will automatically power off after 15 minutes without being paired to a device.Device and Accessories1Instructions2X4.0 Bluetooth Headphone3.5mm Audio Cable USB Charge CableUser Manual x 1x 1x 1Choose “MPOW X4.0” to ConnectRange < 1MOperating the Headphone3Press “ ” ButtonsHold 2sHold 4sHold 6sPower ONPower OFFPairing ModePairing to a Bluetooth Device1.2.3.4.SettingsBluetoothBluetoothDEVICESMPOW X4.0 Connected234186 75Play / Pause / Answer Call / Hang Up callNOTEIf a call comes in while you are listening to music or stream-ing a video, the audio / video will be paused, and you will hear your phones ringtone through the headphone. Once the call is ended, your entertainment will resume.Activating Voice Control / Your Devices Personal AssistantTo activate voice control, simply double tap the center power button on the earcup, and you will hear your phone’s notifica-tion that voice control is activated. You can now ask your personal assistant whatever you want, from the microphone on your headphone.Operation is subject to the following three conditions: This device may not cause harmful interference.This device must accept any interference received, includ-ing interference that may cause undesired operation.This device has been evaluated to meet general RF expo-sure requirements. The device can be used in portable exposure condition without restriction.1. 2. 3. Charging the Headphone LED BehaviourOutput: DC 5VCharging＜2h0% 100%1.Charging the HeadphoneThis headphone has a built-in, non-removable lithium battery. We highly recommend that you fully charge the headphone before the first use.To charge, connect the charging cable to the charging port, and then to a USB charger.2. A red light will indicating the headphone is charging.3. The red light will turn off once the headphone is charged. The blue Light is on all the time when fully charged.Fast ChargingIt can be frustrating to forget to charge your headphones. For those moments, our Fast Charge technology gives you 1.5 hours of play time with only 10 minutes of charging.Specifications5Special Feature: Pair your Mpow headphone to two devices at the same itemConnect to the first device. Once complete, disconnect the Bluetooth of that device.Connect to the second device.Turn on the Bluetooth of the first device and re-connect to it.Now both devices will be paired to the headphone at the same time.1.2.3.4.5.Listen to audio on your PC, without missing a phone call.Can also connect to two smartphones, smartphone and tablet, tablet and laptop, etc...Operation RangeTalking TimePlaying TimeCharging TimeCharging VoltageBattery Capacity33 feet15-20 hours15-20 hours＜2 hoursDC 5V ± 0.25V3.7V / 500 mAHNOTEActual play and talk times will ultimately depend on the phone / mobile device you are using, the listening volume, as well the frequency of the use of the different buttons and toggling between functions.4Work Status Voice PromptPower on Power onPower off Power offPairing mode PairingIncoming callsConnected ConnectedDisconnected DisconnectedChargingLow battery warningIndicator Light StatusBlue light flashes 3 times slowlyRed light flashes 3 times slowly then offRed & Blue Lights flash alternately and fastRed light is always on and the blue light flashes once every four secondsBlue light flashes once every 5 secondsRed light is on when charged and blue Light is on all the time when fully chargedBlue light stop flashing then red light flash Battery Lowx 3x 3 x1/4S x1/5SActive Noise CancelNOTE3.5mm AUX CableJust plug one end of the audio cable into the headphone, and the other one into your mobile device or PC to listen whatever you are streaming, or to participate in a conference call. The Bluetooth mode will automatically disconnect when you insert the audio cable.Audio Cable ConnectionSmartphone PC/MAC Tablet3.5mm Audio Connector1Micro USB Charging Port (cable included)3Active Noise Cancel Button (ANC)5ANC Indicator Light2678Led Light Indicator4Slide the noise cancel switch to be ON / OFF. When the noise is cancelled, the green light is on.Hold the “ ” button for 2s and you will be able to take a call from your phone rather than your headphone.Hold the “ ” button for 2 seconds while in standby mode. You will hear “Last Number Redial”Next Song / Volume Up / Previous Song / Volume DownPress “ ” ButtonsLong PressShort PressNext SongVolume UpPress “ ” ButtonsRe-dial Last NumberChange from Headphone to Phone ModeUn-pairing the headphone from your device Simultaneously press “ ” and “ ” while in standby mode to un-pair the headphone from your mobile deviceRemove Bluetooth PairingLong PressShort PressPrevious SongVolume DownNOTEThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harm-ful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures：Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Consult the dealer or a technician for help.NOTEAs with all rechargeable batteries, the charge / discharge cycles affect the battery’s performance over time.The headphone automatically turns OFF while charging.You will hear a voice prompt when the battery is low, and the red indicator will flash.The charging temperature is 50℉-113℉. 1.2.3.4.Press “ ” ButtonsShort PressPress 2SAnswer / Hang upReject an Incoming Call/Short Press Play / Pause/尺寸： 60x95(mm) 材质： 128g 哑粉纸 双面四色印刷+专色（PANTON 2347C） 装订方式： 七折页（风琴折）www.xmpow.comFor More Information Please VisitBluetooth HeadphoneBMBH143CX4.0MADE IN CHINAThis device complies with Part 15 of the FCC Rules.FCC ID : 2AMH2-BMBH143CMPOW TECHNOLOGY CO.,LTDCopyright © MPOW Inc. All rights reserved.www.xmpow.com | support@xmpow.comPhone Number : 1-844-869-3583The Bluetooth® word mark and logos are registered trade-marks owned by Bluetooth SIG, Inc. and any use of such marks by MPOW Technology，LTD is under license. Other trademarks and trade names are those of their respective owners.WARNING!The product can ONLY be charged by 5V Adapter/USB Port, otherwise it will cause heat and fire.The BMBH143C is not a toy, please supervise your children when using the equipment.To avoid potential risks and protect products, please do not charge it at a temperature lower than 50℉ or higher than 113℉.1.2.3.Limited Warranty6MPOW Technology Co., LTD, warrants to you that the Product (excepting components provided in / with the Product) will be free from defects in workmanship and materials for a period of ONE year from the date of retail purchase by you (the “Warranty Period”). During the Warranty Period, the Product (excepting components), will be repaired or replaced at MPOW’s option, without charge for either parts or labor OR at MPOW’s sole option, the price of the Product may be refunded, subject to depreciation based on your purchase price for the Product pro-rated over the remaining balance of the Warranty Period. Any warranty service or replacement of parts will not extend the Warranty Period.This Limited Warranty does not cover defects which are a result of : Damage caused by accident, unreasonable use or neglect (including the lack of reasonable and necessary main-tenance); Damage during shipment (claims must be presented to the carrier); Damage to, or deterioration of, any accessory or decorative surface; Damage resulting from failure to follow instructions contained in your owner’s manual;Damage resulting from the performance of repairs by someone other than an authorized MPOW service center ;Deterioration of component parts, the nature of which is to become worn or depleted with use, such as batteries and headphone ear pads.1.2.3.4.6.5.FCC Statement7Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority . to operate the equipment

Navigation menu