MTD 13WC76LF031 User Manual TRACTOR Manuals And Guides 1108576L

User Manual: MTD 13WC76LF031 13WC76LF031 MTD TRACTOR - Manuals and Guides View the owners manual for your MTD TRACTOR #13WC76LF031. Home:Lawn & Garden Parts:MTD Parts:MTD TRACTOR Manual

Open the PDF directly: View PDF .
Page Count: 32

Safe Operation Practices • Set-Up • Operation • Maintenance • Service • Troubleshooting • Warranty

L

Automatic Lawn Tractor mModel Series 760

MTD LLC, P.O. BOX 361131 CLEVELAND, OHiO 44136-0019

PrintedIn USA FormNo.769-05684

(December11,2009)

ToTheOwner 1

ThankYou

Thank you for purchasing a lawn tractor manufactured by

MTD LLC. It was carefully engineered to provide excellent

performance when properly operated and maintained.

Please read this entire manual prior to operating the equipment.

It instructs you how to safely and easily set up, operate and

maintain your machine. Please be sure that you, and any other

persons who will operate the machine, carefully follow the

recommended safety practices at all times. Failure to do so could

result in personal injury or property damage.

All information in this manual is relative to the most recent

product information available at the time of printing. Review

this manual frequently to familiarize yourself with the machine,

its features and operation. Please be aware that this Operator's

Manual may cover a range of product specifications for various

models. Characteristics and features discussed and/or illustrated

in this manual may not be applicable to all models. MTD LLC

reserves the right to change product specifications, designs and

equipment without notice and without incurring obligation.

If you have any problems or questions concerning the machine,

phone your local authorized MTD service dealer or contact us

directly. MTD's Customer Support telephone numbers, website

address and mailing address can be found on this page. We want

to ensure your complete satisfaction at all times.

Throughout this manual, all references to right and left side of the

machine are observed from the operating position

The engine manufacturer is responsible for all engine-related

issues with regards to performance, power-rating, specifications,

warranty and service. Please refer to the engine manufacturer's

Owner's/Operator's Manual, packed separately with your

machine, for more information.

1"able of Contents

Safe Operation Practices ........................................ 3

Assembly &Set-Up .................................................. 9

Controls & Features ................................................ 12

Operation ................................................................ 13

Maintenance & Adjustment. ................................. 18

Service .................................................................... 22

Troubleshooting .................................................... 27

Replacement Parts ................................................ 28

Attachments & Accessories .................................. 29

CA. Emission Control Statement .......................... 30

Warranty ................................................................ 32

RecordProduct information

Before setting up and operating your new equipment, please

locate the model plate on the equipment and record the

information in the provided area to the right. You can locate the

model plate by looking beneath the seat. This information will

be necessary, should you seek technical support via our web

site, Customer Support Department, or with a local authorized

service dealer.

MODEL NUMBER

DNDNDNDNDND

SERIALNUMBER

DFI[3FI[3FI[3FI[3F1D

CustomerSupport

Please do NOT return the machine to the retailer or dealer without first contacting our Cu;tomer Support Department.

If you have difficulty assembling this product or have any questions regarding the controls, operation, or maintenance of

this machine, you can seek help from the experts. Choose from the options below:

0 Visit us on the web at www.mtdproducts.com

0 Call a Customer Support Representative at (800) 800-7310 or (330) 220-4683

0 Write us at MTD LLC • RO. Box 361131 • Cleveland, OH • 44136-0019

ImportantSafeOperationPractices 2

,A

WARNING! This symbol points out important safety instructions which, if not followed,

could endanger the personal safety and/or property of yourself and others. Read and follow

all instructions in this manual before attempting to operate this machine. Failure to comply

with these instructions may result in personal injury.

When you see this symbol. HEED ITS WARNING!

CALIFORNIA PROPOSITION 65

WARNING! Engine Exhaust, some of its constituents, and certain vehicle components

contain or emit chemicals known to State of California to cause cancer and birth defects

or other reproductive harm.

WARNING! Battery posts, terminals, and related accessories contain lead and lead

compounds, chemicals known to the State of California to cause cancer and reproductive

harm. Wash hands after handling

DANGER! This machine was built to be operated according to the safe operation practices in

this manual. As with any type of power equipment, carelessness or error on the part of the

operator can result in serious injury. This machine is capable of amputating hands and feet

and throwing objects. Failure to observe the following safety instructions could result in

serious injury or death.

GeneralOperation

1. Read, understand, and follow all instructions on the

machine and in the manual(s) before attempting to

assemble and operate. Keep this manual in a safe place for

future and regular reference and for ordering replacement

parts.

2. Be familiar with all controls and their proper operation.

Know how to stop the machine and disengage them

quickly.

3. Never allow children under 14 years of age to operate this

machine. Children 14 and over should read and understand

the instructions and safe operation practices in this manual

and on the machine and should be trained and supervised

by an adult.

4. Never allow adults to operate this machine without proper

instruction.

5_ To help avoid blade contact or a thrown object injury,

keep bystanders, helpers, children and pets at least 75 feet

from the machine while it is in operation. Stop machine if

anyone enters the area.

6. Thoroughly inspect the area where the equipment is to be

used. Remove all stones, sticks, wire, bones, toys, and other

foreign objects which could be picked up and thrown by

the blade(s). Thrown objects can cause serious personal

injury.

7. Plan your mowing pattern to avoid discharge of material

toward roads, sidewalks, bystanders and the like. Also,

avoid discharging material against a wall or obstruction

which may cause discharged material to ricochet back

toward the operator.

8. Always wear safety glasses or safety goggles during

operation and while performing an adjustment or repair

to protect your eyes. Thrown objects which ricochet can

cause serious injury to the eyes.

9. Wear sturdy, rough-soled work shoes and close-fitting

slacks and shirts. Loose fitting clothes and jewelry can be

caught in movable parts. Never operate this machine in

bare feet or sandals.

10. Be aware of the mower and attachment discharge direction

and do not point it at anyone. Do not operate the mower

without the discharge cover or entire grass catcher in its

proper place.

11. Do not put hands or feet near rotating parts or under the

cutting deck. Contact with the blade(s) can amputate

hands and feet.

23.

24.

12. Amissingordamageddischargecovercancauseblade

contactorthrownobjectinjuries.

13. Stoptheblade(s)whencrossinggraveldrives,walks,or

roadsandwhilenotcuttinggrass.

14. Watchfortrafficwhenoperatingnearorcrossing

roadways.Thismachineisnotintendedforuseonany

publicroadway.

15. Donotoperatethemachinewhileundertheinfluenceof

alcoholordrugs.

16. Mowonlyindaylightorgoodartificiallight.

17. Nevercarrypassengers.

18. Disengageblade(s)beforeshiftingintoreverse.Backup

slowly.Alwayslookdownandbehindbeforeandwhile

backingtoavoidaback-overaccident.

19. Slowdownbeforeturning.Operatethemachinesmoothly.

Avoiderraticoperationandexcessivespeed.

20. Disengageblade(s),setparkingbrake,stopengineandwait

untiltheblade(s)cometoacompletestopbeforeremoving

grasscatcher,emptyinggrass,uncloggingchute,removing

anygrassordebris,ormakinganyadjustments.

21. Neverleavearunningmachineunattended.Alwaysturn

offblade(s),placetransmissioninneutral,setparking

brake,stopengineandremovekeybeforedismounting.

22. Useextracarewhenloadingorunloadingthemachineinto

atrailerortruck.Thismachineshouldnotbedrivenupor

downramp(s),becausethemachinecouldtipover,causing

seriouspersonalinjury.Themachinemustbepushed

manuallyonramp(s)toloadorunloadproperly.

Mufflerandenginebecomehotandcancauseaburn.Do

nottouch.

25.

26.

Checkoverheadclearancescarefullybeforedrivingunder

lowhangingtreebranches,wires,dooropeningsetc.,

wheretheoperatormaybestruckorpulledfromthe

machine,whichcouldresultinseriousinjury.

Disengageallattachmentclutches,depressthebrake

pedalcompletelyandshiftintoneutralbeforeattempting

tostartengine.

Your machine is designed to cut normal residential grass of

a height no more than 10". Do not attempt to mow through

unusually tall, dry grass (e.g., pasture) or piles of dry leaves.

Dry grass or leaves may contact the engine exhaust and/

or build up on the mower deck presenting a potential fire

hazard.

27. Use only accessories and attachments approved for this

machine by the machine manufacturer. Read, understand

and follow all instructions provided with the approved

accessory or attachment.

28. Data indicates that operators, age 60 years and above, are

involved in a large percentage of riding mower-related

injuries. These operators should evaluate their ability

to operate the riding mower safely enough to protect

themselves and others from serious injury.

29. If situations occur which are not covered in this manual, use

care and good judgment. Contact your customer service

representative for assistance.

SlopeOperation

Slopes are a major factor related to loss of control and tip-over

accidents which can result in severe injury or death. All slopes

require extra caution. If you cannot back up the slope or if you

feel uneasy on it, do not mow it.

For your safety, use the slope gauge included as part of this

manual to measure slopes before operating this machine on

a sloped or hilly area. If the slope is greater than 15 degrees as

shown on the slope gauge, do not operate this machine on that

area or serious injury could result.

Do:

1. Mow up and down slopes, not across. Exercise extreme

caution when changing direction on slopes.

2. Watch for holes, ruts, bumps, rocks, or other hidden

objects. Uneven terrain could overturn the machine. Tall

grass can hide obstacles.

3. Use slow speed. Choose a low enough speed setting so

that you will not have to stop or shift while on the slope.

Tires may lose traction on slopes even though the brakes

are functioning properly. Always keep machine in gear

when going down slopes to take advantage of engine

braking action.

4. Follow the manufacturer's recommendations for wheel

weights or counterweights to improve stability.

5. Use extra care with grass catchers or other attachments.

These can change the stability of the machine.

6. Keep all movement on the slopes slow and gradual. Do

not make sudden changes in speed or direction. Rapid

engagement or braking could cause the front of the

machine to lift and rapidly flip over backwards which could

cause serious injury.

7. Avoid starting or stopping on a slope. If tires lose traction,

disengage the blade(s) and proceed slowly straight down

the slope.

Do Not:

1. Do not turn on slopes unless necessary; then, turn slowly

and gradually downhill, if possible.

2. Do not mow near drop-offs, ditches or embankments. The

mower could suddenly turn over if a wheel is over the edge

of a cliff, ditch, or if an edge caves in.

3. Do not try to stabilize the machine by putting your foot on

the ground.

4. Do not use a grass catcher on steep slopes.

5. Do not mow on wet grass. Reduced traction could cause

sliding.

6. Do not shift to neutral and coast downhill. Over-speeding

may cause the operator to lose control of the machine

resulting in serious injury or death.

7. Do not tow heavy pull behind attachments (e.g. loaded

dump cart, lawn roller, etc.) on slopes greater than 5

degrees. When going down hill, the extra weight tends

to push the tractor and may cause you to loose control

(e.g. tractor may speed up, braking and steering ability are

reduced, attachment may jack-knife and cause tractor to

overturn).

4 I SECTION 2 -- IMPORTANT SAFE OPERATION PRACTICES

Children

1. Tragic accidents ca n occur if the operator is not alert to the

presence of children. Children are often attracted to the

machine and the mowing activity. They do not understand

the dangers. Never assume that children will remain where

you last saw them.

a. Keep children out of the mowing area and in

watchful care of a responsible adult other than the

operator.

b. Be alert and turn machine off if a child enters the

area.

c. Before and while backing, look behind and down for

small children.

d. Never carry children, even with the blade(s) shut off.

They may fall offand be seriously injured or interfere

with safe machine operation.

e. Use extreme care when approaching blind corners,

doorways, shrubs, trees or other objects that may

blockyour vision of a child who may run into the

path of the machine.

f. To avoid back-over accidents, always disengage

the cutting blade(s) before shifting into Reverse.

If equipped, the "Reverse Caution Mode" should

not be used when children or others are around.

2.

g. Keep children away from hot or running engines.

They can suffer burns from a hot muffler.

h. Remove key when machine is unattended to

prevent unauthorized operation.

Never allow children under 14 years of age to operate this

machine. Children 14 and over should read and understand

the instructions and safe operation practices in this manual

and on the machine and should be trained and supervised

by an adult.

Towing

1. Tow only with a machine that has a hitch designed for

towing. Do not attach towed equipment except at the

hitch point.

2. Follow the manufacturers recommendation for weight

limits for towed equipment and towing on slopes.

3. Never allow children or others in or on towed equipment.

4. On slopes, the weight of the towed equipment may cause

loss of traction and loss of control.

5. Always use extra caution when towing with a machine

capable of making tight turns (e.g. "zero-turn" ride-on

mower). Make wide turns to avoid jack-knifing.

6. Travel slowly and allow extra distance to stop.

7. Do not shift to neutral and coast downhill.

Service

SafeHandling of Gasoline:

1. To avoid personal injury or property damage use extreme

care in handling gasoline. Gasoline is extremely

flammable and the vapors are explosive. Serious

personal injury can occur when gasoline is spilled on

yourself or your clothes which can ignite. Wash your skin

and change clothes immediately.

a. Use only an approved gasoline container.

b. Never fill containers inside a vehicle or on a truck

or trailer bed with a plastic liner. Always place

containers on the ground away from your vehicle

before filling.

c. When practical, remove gas-powered equipment

from the truck or trailer and refuel it on the ground.

If this is not possible, then refuel such equipment on

a trailer with a portable container, rather than from a

gasoline dispenser nozzle.

d. Keep the nozzle in contact with the rim of the fuel

tank or container opening at all times until fueling is

complete. Do not use a nozzle lock-open device.

e. Extinguish all cigarettes, cigars, pipes and other

sources of ignition.

f. Never fuel machine indoors.

g. Never remove gas cap or add fuel while the engine

is hot or running. Allow engine to cool at least two

minutes before refueling.

h. Never over fill fuel tank. Fill tank to no more than 1/2

inch below bottom of filler neck to allow space for

fuel expansion.

i. Replace gasoline cap and tighten securely.

j. If gasoline is spilled, wipe it off the engine and

equipment. Move machine to another area. Wait 5

minutes before starting the engine.

k. To reduce fire hazards, keep machine free of grass,

leaves, or other debris build-up. Clean up oil or fuel

spillage and remove any fuel soaked debris.

I. Never store the machine or fuel container inside

where there is an open flame, spark or pilot light

as on a water heater, space heater, furnace, clothes

dryer or other gas appliances.

m. Allow a machine to cool at least five minutes before

storing.

GeneralService

1. Never run an engine indoors or in a poorly ventilated area.

Engine exhaust contains carbon monoxide, an odorless,

and deadly gas.

2. Before cleaning, repairing, or inspecting, make certain the

blade(s) and all moving parts have stopped. Disconnect the

spark plug wire and ground against the engine to prevent

unintended starting.

SECTION 2 -- IMPORTANT SAFE OPERATION PRACTICES S

3. Periodically check to make sure the blades come to

complete stop within approximately (5) five seconds after

operating the blade disengagement control. If the blades

do not stop within the this time frame, your machine

should be serviced professionally by an authorized MTD

Service Dealer.

4. Check brake operation frequently as it is subjected to wear

during normal operation. Adjust and service as required.

5. Check the blade(s) and engine mounting bolts at frequent

intervals for proper tightness. Also, visually inspect blade(s)

for damage (e.g., excessive wear, bent, cracked). Replace

the blade(s) with the original equipment manufacturer's

(O.E.M.) blade(s) only, listed in this manual. "Use of parts

which do not meet the original equipment specifications

may lead to improper performance and compromise

safety!"

6. Mower blades are sharp. Wrap the blade or wear gloves,

and use extra caution when servicing them.

7. Keep all nuts, bolts, and screws tight to be sure the

equipment is in safe working condition.

8. Never tamper with the safety interlock system or other

safety devices. Check their proper operation regularly.

9. After striking a foreign object, stop the engine, disconnect

the spark plug wire(s) and ground against the engine.

Thoroughly inspect the machine for any damage. Repair

the damage before starting and operating.

10. Never attempt to make adjustments or repairs to the

machine while the engine is running.

11. Grass catcher components and the discharge cover are

subject to wear and damage which could expose moving

parts or allow objects to be thrown. For safety protection,

frequently check components and replace immediately

with original equipment manufacturer's (O.E.M.) parts only,

listed in this manual. "Use of parts which do not meet the

original equipment specifications may lead to improper

performance and compromise safety!"

12. Do not change the engine governor settings or over-speed

the engine. The governor controls the maximum safe

operating speed of the engine.

13. Maintain or replace safety and instruction labels, as

necessary.

14. Observe proper disposal laws and regulations for gas, oil,

etc. to protect the environment.

15. According to the Consumer Products Safety Commission

(CPSC) and the U.S. Environmental Protection Agency (EPA),

this product has an Average Useful Life of seven (7) years,

or 270 hours of operation. At the end of the Average Useful

Life have the machine inspected annually by an authorized

service dealer to ensure that all mechanical and safety

systems are working properly and not worn excessively.

Failure to do so can result in accidents, injuries or death.

Do not modify engine

To avoid serious injury or death, do not modify engine in any

way. Tampering with the governor setting can lead to a runaway

engine and cause it to operate at unsafe speeds. Never tamper

with factory setting of engine governor.

Notice Regarding Emissions

Engines which are certified to comply with California and federal

EPA emission regulations for SORE (Small Off Road Equipment)

are certified to operate on regular unleaded gasoline, and

may include the following emission control systems: Engine

Modification (EM), Oxidizing Catalyst (OC), Secondary Air

Injection (SAI) and Three Way Catalyst (TWC) if so equipped.

SparkArrestor

_ARNING! This machine is equipped with an

internal combustion engine and should not be used

on or near any unimproved forest-covered,

brushcovered or grass-covered land unless the

engine's exhaust system is equipped with a spark

arrester meeting applicable local or state laws (if

any).

Ifa spark arrester is used, it should be maintained in effective

working order by the operator. In the State of California the

above is required by law (Section 4442 of the California Public

Resources Code). Other states may have similar laws. Federal laws

apply on federal lands.

A spark attester for the muffler is available through your

nearest engine authorized service dealer or contact the service

department, RO. Box 361131 Cleveland, Ohio 44136-0019.

WARNING! Your Responsibility--Restrict the use of this power machine to persons who read, understand and

follow the warnings and instructions in this manual and on the machine.

SAVETHESEiNSTRUCTIONS!

6 J SECTION 2 -- IMPORTANT SAFE OPERATION PRACTICES

Safety Symbols

This page depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the

machine before attempting to assemble and operate.

O

J

J

Lq

M

N

A

READ THE OPERATOR'S MANUAL(S)

Read, understand, and follow all instructions in the manual(s) before attempting to

assemble and operate

DANGER-- ROTATING BLADES

Never carry passengers. Never carry children, even with the blades off.

DANGER-- ROTATING BLADES

Always look down and behind before and while backing to avoid a back-over accident.

WARNING-- ROTATING BLADES

Do not put hands or feet near rotating parts or under the cutting deck. Contact with the

blade(s) can amputate hands and feet.

WARNING--THROWN OBJECTS

This machine may pick up and throw and objects which can cause serious personal injury.

WARNING--THROWN OBJECTS

This machine may pick up and throw and objects which can cause serious personal injury.

BYSTANDERS

Keep bystanders, helpers, children and pets at least 75 feet from the machine while it is in

operation.

WARNING-- SLOPE OPERATION

Do not operate this machine on a slope greater than 15 degrees.

WARNING-- HOT SURFACE

Engine parts, especially the muffler, become extremely hot during operation. Allow engine

and muffler to cool before touching.

DANGER -- ROTATING BLADES

To reduce the risk of injury, keep hands and feet away. Do not operate unless discharge cover

or grass catcher is in its proper place. If damaged, replace immediately.

WARNING-- TOWING

Avoid jack-knifing when towing, go slow and make wide turns.

SECTION 2 -- IMPORTANT SAFE OPERATION PRACTICES 7

co

-4

6

Z

I

Z

O

6

Z

"o

-4

or a corner of a building...I

I

|, _ or a fence post

I I

I |

'/:Oldo,_ ',

'" .- 22

'diine

'a 15Oslope

.I

I

I

15 °

Usethis page asaguide to determine slopes where you may not operate safely.

WARNING! Do not operate your lawn mower on such slopes. Do not mow on inclines with a slope in excess of 15 degrees

(a rise of approximately 2-1/2 feet every 10 feet). A riding mower could overturn and cause serious injury. Operate riding

mowers up and down slopes, never across the face of slopes.

Assembly&Set-Up 3

TractorSet-Up

NOTE:This Operators Manual covers a range of product

specifications for various models. Characteristics and features

discussed and/or illustrated in this manual may not be applicable

to all models. MTD LLC reserves the right to change product

specifications, designs and equipment without notice and

without incurring obligation.

Connectingthe BatteryCables

CALIFORNIA PROPOSITION 65 WARNING:

Battery posts, terminals, and related accessories

contain lead and lead compounds, chemicals known

to the State of California to cause cancer and

reproductive harm. Wash hands after handling.

CAUTION: When attaching battery cables, always

connect the POSITIVE (Red) wire to its terminal first,

followed by the NEGATIVE (Black) wire.

For shipping reasons, both battery cables on your equipment

may have been left disconnected from the terminals at the

factory. To connect the battery cables, proceed as follows:

NOTE:The positive battery terminal is marked Pos. (+). The

negative battery terminal is marked Neg. (-).

1. Remove the plastic cover, if present, from the positive battery

terminal and attach the red cable to the positive battery

terminal (+) with the bolt and hex nut. See Fig. 3-1.

Figure 3-1

2. Removethe plasticcover, ifpresent, from the negative battery

terminal and attach the black cable to the negative battery

terminal (-) with the bolt and hex nut. See Fig. 3-1.

3. Positionthe red rubberbootoverthe positivebatteryterminalto

help protect it from corrosion.

NOTE: If the battery is put into service after the date shown

on top/side of battery, charge the battery as instructed in the

Maintenance section your Operator's Manual prior to operating

the tractor.

Shipping BraceRemoval

_ARNING! Make sure the riding mower's engine is

off, remove the ignition key, and set the parking

brake before removing the shipping brace. Refer to

the Controls and Features section for instructions on

how to set the parking brake.

Locate the shipping brace, if present, and accompanying

warning tag found on the right side of the mower, between

the discharge chute and the cutting deck. See Fig. 3-2.

f\

Figure 3-2

Place the deck lift lever in the highest cutting position.

Refer to Setting the Cutting Height in the Operation

section of this manual.

While pushing the discharge chute towards the machine

with your left hand, remove the shipping brace with your

right hand by grasping it between your thumb and index

finger and rotating it clockwise.

i_li WARNING! The shipping brace, used for packaging

purposes only, must be removed and discarded

before operating your riding mower.

WARNING! The mowing deck is capable of

throwing objects. Failure to operate the riding

mower without the discharge cover in the proper

operating position could result in serious personal

injury and/or property damage.

Attaching The Steering Wheel

If the steering wheel for your tractor did not come attached, the

hardware for attaching it has been packed within the steering

wheel, beneath the steering wheel cap. Carefully pry offthe

steering wheel cap and remove the hardware.

I. With the wheels of the tractor pointing straight forward,

place the steering wheel over the steering shaft.

2. Place the washer (with the cupped side down) over the

steering wheel and secure with the hex bolt. See Fig. 3-3.

\

J

Figure 3-3

3. Place the steering wheel cap over the center of the steering

wheel and push downward until it "clicks" into place.

Attaching TheDashCollar

If the tractor's dash collar did not come attached from the

factory, the screws for attaching it can be found in either side of

the dash console. Remove the two screws from the console and

secure the dash collar as illustrated in Fig 3-4.

f

\\\

\\

\

\

Figure 3-4

SECTION 3-- ASSEMBLY&SET-UP

Attaching The Seat

If the seat for your tractor was not attached at the factory, follow

the applicable instructions below to attach it.

NOTE: For shipping reasons, some seats are not attached at

the factory. If this is the case, free the seat from its shipping

position and remove the hex screw (or knob screw if applicable)

from the bottom of seat before proceeding with the following

instructions.

1. Positiontheseatfacing forward overtheseat pivotbracket, with

the two forward seat mount tabs fitting into the provided

grooves in the seat pivot bracket.

2. Slide the seat rearward and align the center mounting hole in

the seat with the slot in the seat pan. Insert the hex screw

previously removed. Do not tighten at this point.

3. Adjustthe seattothe optimal operator preferred location,this

may mean actually sitting in the seat to decide what feels

best to the operator. Keep in mind the operator needs to

be able to fully operate all pedals comfortably while sitting

back in the seat.

4.

5.

Tighten the hex screw at this time.

To adjust the position of the seat, loosen the hex screw on the

bottom of the seat. Slide the seat forward or backward as

desired. Retighten the hex screw. See Fig. 3-5.

He× Screw

Adjust

Tire Pressure

_ARNING! Maximum tire pressure under any

circumstances is 30 psi. Equal tire pressure should be

maintained at all times. Never exceed the maximum

inflation pressure shown on the sidewall of the tire.

The recommended operating tire pressure is:

Approximately 10 psi for the rear tires

Approximately 14 psi for the front tires

IMPORTANT: Refer to the tire sidewall for exact tire

manufacturer's recommended or maximum psi. Do not

overinflate. Uneven tire pressure could cause the cutting deck to

mow unevenly.

Gasand OilFill-up

The gasoline tank is located under the hood. Do not overfill.

_ ARNING! Use extreme care when handling

gasoline. Gasoline is extremely flammable and the

vapors are explosive. Never fuel machine indoors or

while the engine is hot or running. Extinguish

cigarettes, cigars, pipes, and other sources of ignition.

Service the engine with gasoline and oil as instructed in the

separate Engine Operator/Owner Manual packed with your

tractor. Read the instructions carefully.

IMPORTANT: Your tractor is shipped with motor oil in the

engine. However, you MUST check the oil level before

operating. Be careful not to overfill.

ForCaliforniaModels:

For California models equipped with a tethered, ratcheting fuel

cap, STOP filling tank once fuel is seen inside the filler neck. This

ensures that a proper expansion volume is created, otherwise the

fuel can overflow creating a hazardous situation. Do NOTtop off

the fuel tank. See Fig. 3-6.

f

Figure 3-5

Mulch Plug

Note: See the Attachments & Accessories section if you would

like information regarding adding a mulching system for your

model of tractor.

Figure 3-6

SECTION3 -- ASSEMBLY&SET-UP 11

Controlsand Features 4

F

Speed Control &

Parking Brake Lever

Clutch/Brake Pedal

Ignition Switch

Module

Throttle/Choke Lever

Shift Lever

J

PTO (Blade Engage) Lever Deck Lift Lever

Figure 4=1

Lawn Tractor controls and features are illustrated in Fig 4-1 and described on the following pages.

i_ WARNING! Read and follow all safety rules and instructions in this manual, including the entire Operation section,

before attempting to operate this machine. Failure to comply with all safety rules and instructions may result in personal

injury.

Throttle/ChokeControl Lever

The throttle control lever is located on the right side of the

tractor's dash panel. This lever controls the speed of the engine

and when pushed all the way forward, the choke control also.

When set in a given position, the throttle will maintain a uniform

engine speed. See Fig. 4-2.

CHOKE

FAST

SLOW

BI]

m

Figure 4-2

IMPORTANT: When operating the tractor with the cutting deck

engaged, be certain that the throttle lever is always in the FAST

(rabbit) position.

IgnitionSwitch

The ignition switch is activated to start the engine. Insert key

into the ignition switch and turn clockwise to the START position.

Release the key into the ON position once engine has fired. See

Fig. 4-3.

To stop the engine, turn the ignition key counterclockwise to the

OFF position. See Fig. 4-3.

_ARNING! Never leave a running machine

unattended. Always disengage PTO, move shift lever

into neutral position, set parking brake, stop engine

and remove key to prevent unintended starting.

IMPORTANT: Prior to operating the tractor, refer to both Safety

Interlock Switches and Starting The Engine in the Operation

section of this manual for further detailed instructions.

Clutch-BrakePedal

The clutch-brake pedal is located on the left side of the lawn

tractor, along the running board. Depress the clutch-brake pedal

part way down when slowing the tractor by changing speeds

(Refer to Speed Control Lever). Depress the pedal all the way down

to engage the disc brake and bring the tractor to a complete

stop.

NOTE:The pedal must be depressed to start the engine. Refer to

Safety Interlock Switches in the Operation section of this manual.

ParkingBrake

To set the parking brake, fully depress the clutch-brake pedal.

Move the speed control lever all the way down and into the

parking brake position. Release the clutch-brake pedal to allow

the parking brake to engage.

To release the parking brake, depress the clutch-brake pedal and

move the speed control lever out of the notches to the desired

position. Release the speed control lever and the clutch-brake

pedal.

NOTE:The parking brake must be set if the operator leaves the

seat with the engine running or the engine will automatically

shut off.

Off

On

Start

Figure 4-3

SECTION4 -- CONTROLS AND FEATURES 13

ShiftLever

The shift lever is located on the left side of the fender a nd has

three positions, FORWARD, NEUTRAL and REVERSE.The brake

pedal must be depressed and the tractor must not be in motion

when the moving shift lever. See Fig. 4-4.

IMPORTANT: Never force the shift lever. Doing so may result in

serious damage to the tractor's transmission.

F

RUETRAL

Figure 4=4

SpeedControl Lever

The speed control lever, located on the left side of

the tractor's dash console, allows you to regulate

the ground speed of the lawn tractor. To use,

depress the clutch-brake pedal and move the lever

out of the parking brake notch and forward to

increase the tractor's ground speed. When a desired

speed has been reached, release the lever into an

appropriate notch to maintain that speed.

To slow the tractor's ground speed, depress the

clutch-brake pedal and move the speed control

lever rearward and release it into a notch.

NOTE:Lawn tractors vary by model and are

available with either a 6- or 7-speed control lever.

PTO(BladeEngage)Lever

Found on the tractor's right fender, the PTO (blade

engage) lever is used to engage power to the cutting

deck or other (separately available) attachments.

To operate, move the lever all the way forward.

Moving the lever all the way rearward into the PTO

OFF position disengages power to the cutting deck/

attachment.

NOTE:The PTO (blade engage)lever must be in the

disengaged (PTO OFF) position when starting the

engine.

DeckLift Lever

Found on your tractor's right fender, the deck lift lever

is used to change the height of the cutting deck. To

use, move the lever to the left, then place in the notch

best suited for your application.

((D)

PARR

BRAKE

_t

Z

|O

m

o

W

r-

m

Z

SECTION 4 -- CONTROLS AND FEATURES

Operation

TO AVOID SERIOUS INJURY

OR DEATH

•GOUP AND DOWNSLOPES,NOTACROSS.

• AVOIDSUDDENTURNS.

•DONOTOPERATETHE UNITWHERE IT COULDSLIP

ORTIP.

•IF MACHINESTOPSGOINGUPHILL,STOP BLADE(S)

AND BACKDOWNHILLSLOWLY.

•KEEPSAFETYDEVICES(GUARDS,SHIELDS,

AND SWITCHES,ETC.) IN PLACEAND WORKING.

•REMOVEOBJECTSTHATCOULDBE THROWN

BY THE BLADE(S).

•KNOWLOCATIONAND FUNCTIONOF ALL CONTROLS.

•BESUREBLADE(S)AND ENGINEARESTOPPED

BEFOREPLACINGHANDSORFEETNEARBLADE(S).

•BEFORELEAVINGOPERATOR'SPOSITION,

DISENGAGEBLADE(S), ENGAGEPARKINGBRAKE,

SHUT OFFAND REMOVEKEY.

READ OPERATOR'S

MANUAL

SafetyInterlockSwitches

J

This tractor is equipped with a safety interlock system for the

protection of the operator. If the interlock system should ever

malfunction, do not operate the tractor. Contact an authorized

MTD service dealer.

The safety interlock system prevents the engine from

cranking or starting unless the parking brake is engaged,

and the PTO (Blade Engage) lever is in the disengaged (OFF)

position.

The engine will automatically shut off if the operator leaves

the seat before engaging the parking brake.

The engine will automatically shut off if the operator leaves

the tractor's seat with the PTO (Blade Engage) lever in the

engaged (ON) position, regardless of whether the parking

brake is engaged.

The engine will automatically shut off if the PTO (Blade

Engage) lever is moved into the engaged (ON) position with

the shift lever in Reverse.

Engagingthe ParkingBrake

Toengagethe parkingbrake:

1. Fully depress the clutch-brake pedal and hold it down with

your foot.

2. Move the speed control lever all the way down and into the

parking brake position.

3. Release the clutch-brake pedal to allow the parking brake

to engage.

Toreleasethe parkingbrake:

1. Depress the clutch-brake pedal and move the speed

control lever out of the parking brake position and into a

desired speed.

Setting the Cutting Height

1. Select the height position of the cutting deck by placing

the deck lift lever in any of the six different cutting height

notches on the right side of the fender.

_WARNING! Keep hands and feet away from the

discharge opening of the cutting deck.

15

Starting the Engine

i_ WARNING! Do not operate the tractor if the

interlock system is malfunctioning. This system was

designed for your safety a nd protection.

NOTE: Refer to the Gasoline and Oil fill-up instructions in the

Assembly & Set-up section of this manual.

1. Insert the tractor key into the ignition switch.

2. Place the PTO (Blade Engage) lever in the disengaged (OFF)

position.

3. Engage the tractor's parking brake.

4. Activate the choke control.

5. Turn the ignition key clockwise to the START position. After

the engine starts, release the key. It will return to the ON (or

Normal Mowing) position.

CAUTION: Do NOT hold the key in the START

position for longer than ten seconds at a time. Doing

so may cause damage to your engine's electric

starter.

6. After the engine starts, deactivate the choke control and

place the throttle control in the FAST position.

NOTE: Do NOT leave the choke control on while operating the

tractor. Doing so will result in a "rich" fuel mixture and cause the

engine to run poorly.

Stopping the Engine

1.

2.

3.

WARNING! If you strike a foreign object, stop the

engine, disconnect the spark plug wire(s) and

ground against the engine. Thoroughly inspect the

machine for any damage. Repair the damage before

restarting and operating

If the blades are engaged, place the PTO (Blade Engage)

lever in the disengaged (OFF) position.

Turn the ignition key counterclockwise to the STOP

position.

Remove the key from the ignition switch to prevent

unintended starting.

DrivingTheTractor

2.

3.

WARNING! Avoid sudden starts, excessive speed

and sudden stops.

WARNING! Do not leave the seat of the tractor

without first placing the PTO (Blade Engage) lever in

the disengaged (OFF) position, depressing the brake

pedal and engaging the parking brake. If leaving

the tractor unattended, also turn the ignition key off

and remove the key.

WARNING! Always look down and behind before

and while backing up to avoid a back-over accident.

Depress the brake pedal to release the parking brake and

let the pedal up.

Move the throttle lever into the FAST (rabbit) position.

Place the shift lever in either the FORWARD or REVERSE

position.

IMPORTANT: Do NOT use the shift lever to change the

direction of travel when the tractor is in motion. Always use

the brake pedal to bring the tractor to a complete stop before

shifting.

4. Releasethe parking brake by depressing the clutch-brake

pedal and positioning the speed control lever in desired

position.

IMPORTANT: First-time operators should use speed positions 1

or 2. Become completely familiar with the tractor's operation and

controls before operating the tractor in higher speed positions.

5. Release clutch-brake pedal slowly to put unit into motion.

6. The lawn tractor is brought to a stop by depressing the

clutch-brake pedal.

NOTE:When operating the unit initially, there will be little

difference between the highest two speeds until after the belts

have seated themselves into the pulleys during the break-in

period.

WARNING! Before leaving the operator's position

for any reason, disengage the blades, place the shift

lever in neutral, engage the parking brake, shut

engine offand remove the key.

IMPORTANT: When stopping the tractor for any reason while

on a grass surface, always:

1. Place the shift lever in neutral,

2. Engage the parking brake,

3. Shut engine off and remove the key. Doing so will minimize

the possibility of having your lawn "browned" by hot

exhaust from your tractor's running engine.

If unit stalls with speed control in high speed, or if unit will

not operate with speed control lever in a low speed position,

proceed as follows:

1. Place shift lever in NEUTRAL.

2. Restart engine.

3. Place speed control lever in highest speed position.

4. Release clutch-brake pedal fully.

5. Depress clutch-brake pedal.

'°1SECTION 5-- OPERATION

6. Place speed control lever in desired position.

7. Place shift lever in either FORWARD or REVERSE,and follow

normal operating procedures.

Driving On Slopes

Refer to the SLOPE GAUGE in the Important Safe Operation

Practices section of the manual to help determine slopes where

you may operate the tractor safely.

_ARNING! Do not mow on inclines with a slope in

excess of 15 degrees (a rise of approximately2-1/2 feet

every 10 feet). The tractor could overturn and cause

serious injury.

Mow up and down slopes, NEVER across.

Exercise extreme caution when changing direction on

slopes.

Watch for holes, ruts, bumps, rocks, or other hidden

objects. Uneven terrain could overturn the machine. Tall

grass can hide obstacles.

Avoid turns when driving on a slope. Ira turn must be

made, turn down the slope. Turning up a slope greatly

increases the chance of a roll over.

Avoid stopping when driving up a slope. If it is necessary

to stop while driving up a slope, start up smoothly and

carefully to reduce the possibility of flipping the tractor

over backward.

Engagingthe Blades

Engaging the PTO (Blade Engage) transfers power to the cutting

deck or other (separately available) attachments. To engage the

blades, proceed as follows:

1. Move the throttle control lever to the FAST (rabbit)

position.

2. Grasp the PTO (Blade Engage) lever and pivot it a II the way

forward into the engaged (ON) position.

3. Keep the throttle lever in the FAST (rabbit) position for the

most efficient use of the cutting deck or other (separately

available) attachments.

The PTO (Blade Engage)lever must be in the disengaged (OFF)

position when starting the engine, when traveling in reverse, and

if the operator leaves the seat. Refer to Safety Interlock Switches

in the Operation section of this manual.

Usingthe Deck Lift Lever

To raise the cutting deck, move the deck lift lever to the left, then

place it in the notch best suited for your application. Refer to

Setting The Cutting Height earlier in this section.

Mowing

_ARNING! To help avoid blade contact or a

thrown object injury, keep bystanders, helpers,

children and pets at least 75 feet from the machine

while it is in operation. Stop machine if anyone

enters the area.

The following information will be helpful when using the cutting

deck with your tractor:

WARNING! Plan your mowing pattern to avoid

discharge of materials toward roads, sidewalks,

bystanders and the like. Also, avoid discharging

material against a wall or obstruction which may

cause discharged material to ricochet back toward

the operator.

Do not mowat high ground speed, especially ira mulch kit

or grass collector is installed.

For best results it is recommended that the first two laps be

cut with the discharge thrown towards the center. After the

first two laps, reverse the direction to throw the discharge

to the outside for the balance of cutting. This will give a

better appearance to the lawn.

Do not cut the grass too short. Short grass invites weed

growth and yellows quickly in dry weather.

Mowing should always be done with the engine at full throttle.

Under heavier conditions it may be necessary to go back

over the cut area a second time to get a clean cut.

Do NOT attempt to mow heavy brush and weeds and

extremely tall grass. Your tractor is designed to mow lawns,

NOT clear brush.

Keep the blades sharp and replace the blades when worn.

Refer to Cutting Blades in the Service section of this manual

for proper blade sharpening instructions.

SECTION S -- OPERATION 17

Maintenance& Adjustments 6

Maintenance

WARNING! Before performing any maintenance or

repairs, disengage PTO, move shift lever into neutral

position, set parking brake, stop engine and remove

key to prevent unintended starting.

Refer to the Engine Operator/Owner Manual for engine

maintenance instructions.

Check engine oil level before each use as instructed in the Engine

Operator/Owner Manual packed with your unit. Follow the

instructions carefully.

ChangingEngineOil

For draining oil from the engine's crankcase of select model

tractors, a plastic oil drain sleeve is packed with this Operator's

Manual. To drain the oil, proceed as follows:

1. Unscrew the oil fill cap and remove the dipstick from the oil

fill tube.

2. Snap the small end ofoil drain sleeve onto the oil sump.

SeeFig. 6-1.

\\\

Figure 6-1

3. Remove drain plug and drain oil into a suitable container

with a capacity of no less than 64 oz.

Perform the above steps in the opposite order after oil has

finished draining.

5. Refill the engine with new motor oil as instructed in the

Engine Operator/Owner Manual packed with your machine.

NOTE: Refer to the Engine Operator/Owner Manual packed with

your unit for information regarding the quantity and proper

viscosity of motor oil.

Air Cleaner

Service the air cleaner element as instructed in the Engine

Operator/Owner Manual packed with your unit.

Spark Plug

The spark plug should be cleaned and the gap reset once a

season. Spark plug replacement is recommended at the start

of each mowing season. Refer to the Engine Operator/Owner

Manual for correct plug type and gap specifications.

Lubrication

_ll, i WARNING! Before lubricating, repairing, or

inspecting, always disengage PTO, move shift lever

into neutral position, set parking brake, stop engine

and remove key to prevent unintended starting.

Engine

Lubricate the engine with motor oil as instructed in the Engine

Owner Manual packed with your unit.

PivotPoints& Linkage

Lubricate all the pivot points on the drive system, parking brake

and lift linkage at least once a season with light oil.

RearWheels

The rear wheels should be removed from the axles once a

season. Lubricate the axles and the rims well with an all-purpose

grease before re-installing them.

FrontAxles

Each end of the tractor's front pivot bar may be equipped with a

grease fitting. Lubricate with a grease gun after every 25 hours of

tractor operation.

Battery

The battery is sealed and is maintenance-flee. Acid levels cannot

be checked.

Always keep the battery cables and terminals clean and

free of corrosive build-up.

After cleaning the battery and terminals, apply a light coat

of petroleum jelly or grease to both terminals.

Always keep the rubber boot positioned over the positive

terminal to prevent shorting.

IMPORTANT: If removing the battery for any reason,

disconnect the NEGATIVE(Black) wire from it's terminal first,

followed by the POSITIVE(Red) wire. When re-installing the

battery, always connect the POSITIVE(Red)wire its terminal

first, followed by the NEGATIVE(Black) wire. Be certain that the

wires are connected to the correct terminals; reversing them

could change the polarity and result in damage to your engine's

alternating system.

CleaningBattery

Clean the battery by removing it from the tractor and washing

with a baking soda and water solution. If necessary, scrape the

battery terminals with a wire brush to remove deposits. Coat

terminals and exposed wiring with grease or petroleum jelly to

prevent corrosion.

Battery Failures

Some common causes for battery failure are:

Incorrect initial activation

Overcharging

Freezing

Undercharging

Corroded connections

These failures are NOT covered by your tractor's warranty.

Cleaningthe EngineAndDeck

Any fuel or oil spilled on the machine should be wiped off

promptly. Do NOT allow debris to accumulate around the cooling

fins of the engine or on any other part of the machine.

IMPORTANT: The use of a pressure washer to clean your

tractor is NOT recommended. It may cause damage to electrical

components, spindles, pulleys, bearings or the engine.

Adjustments

WARNING! Never attempt to make any

adjustments while the engine is running, except

where specified in the operator's manual.

Leveling the Deck

NOTE: Check the tractor's tire pressure before performing any

deck leveling adjustments. Refer to Tires in the Service section of

this manual for more information regarding tire pressure.

Front ToRear

The front of the cutting deck is supported by a stabilizer bar that

can be adjusted to level the deck from front to rear. The front of

the deck should be between 1/4-inch and %-inch lower than the

rear of the deck. Adjust if necessary as follows:

1. With the tractor parked on a firm, level surface, place the

lever for lifting the platform on the second to the top notch

(second highest position) and rotate the blade as close to

the discharge channel that is parallel to the tractor.

2. Measure the distance from the front of the blade tip to

the ground and the rear of the blade tip to the ground.

The first measurement taken should be between 1/4"and

%" less than the second measurement. Determine the

approximate distance necessary for proper adjustment and

proceed, if necessary, to the next step.

3. Locate the flange nut as seen in Fig. 6-2.

To level the deck from front to rear:

Tighten the lock nut to raise the front of the deck;

Loosen the lock nut to lower the front of the deck.

Flange Lock Nut

Figure 6-2

Sideto Side

If the cutting deck appears to be mowing unevenly, a side to side

adjustment can be performed. Adjust if necessary as follows:

1. With the tractor parked on a firm, level surface, place the

deck lift lever in the second from the top notch (second

highest position) and rotate both blades so that they are

perpendicular with the tractor.

2. Measure the distance from the outside of the left blade

tip to the ground and the distance from the outside of the

right blade tip to the ground. Both measurements taken

should be equal. If they're not, proceed to the next step.

3. Loosen, but do NOT remove, the hex cap screw on the left

deck hanger bracket. See Fig. 6-3.

HexCap Screw

Figure 6-3

SECTION 6 -- MAINTENANCE &ADJUSTMENTS 19

4. Balance the deck by using a wrench to turn the

adjustment gear (found immediately behind the hex cap

screw just loosened) clockwise/up or counterclockwise/

down. The deck is properly balanced when both blade tip

measurements taken earlier are equal.

5. Retighten the hex cap screw on the left deck hanger

bracket when proper adjustment is achieved.

Seat Adjustment

Refer to the Set-Up a nd Assembly section of this manual for seat

adjustment instructions.

Parking BrakeAdjustment

WARNING! Never attempt to adjust the brakes

while the engine is running. Always disengage PTO,

move shift lever into neutral position, stop engine

and remove key to prevent unintended starting.

If the tractor does not come to a complete stop when the brake

pedal is completely depressed, or if the tractor's rear wheels

can roll with the parking brake applied, the brake is in need of

adjustment. See an authorized MTD Service Dealer to have your

brakes properly adjusted.

SECTION 6-- MAINTENANCE &ADJUSTMENTS

MaintenanceSchedule

Before

Eachuse

Every Every Every Every

10 Hours 25 Hours SOHours 100 Hours

Prior

toStoring

,/CleanHood/DashLouvers V/"

CheckEngineOilLevel V/" V/"

CheckAirFilter for Dirty, LooseorDamagedParts V/"

ReplaceAir Filter Element V/"

ChangeEngineOil

CleanBattery Terminals V/" V/"

LubeFrontAxlesand Rims _

CleanEngineCoolingFins V/" V/"

LubePedalPivotPoints _

CheckSparkPlugCondition&Gap _

ReplaceFuelFilter

NOTE:This Operators Manual covers a range of product specifications for various models. Characteristics and features discussed and/

or illustrated in this manual may not be applicable to all models. MTD LLC reserves the right to change product specifications, designs

and equipment without notice and without incurring obligation.

IMPORTANT: Since this manual covers a range of various tractor models, it is important to consult the specific engine operator's

manual included with this machine for detailed engine maintenance procedures and intervals.

SECTION 6 -- MAINTENANCE & ADJUSTMENTS 21

Service 7

Cutting DeckRemoval

NOTE: Models equipped with a 38-inch deck have one deck idler

pulley. Models equipped with a 42- and 46-inch deck have two

deck idler pulleys.

To remove the cutting deck, proceed as follows:

1. Place the PTO (Blade Engage) lever in the disengaged (OFF)

position and engage the parking brake.

2. Lower the deck by moving the deck lift lever into the

bottom notch on the right fender.

3. Remove the belt-keeper rod, from around the tractor's

engine pulley, by removing the self-tapping screw (A) that

secures it. See Fig. 7-1.

Note: Make a mental note what hole the other end of the belt-

keeper rod is inserted in for reinstallation purposes.

f -,,

Figure 7=1

4. Removethebelt(C)fromaroundthetractor'senginepulley.See

Fig. 7-1.

5. Looking at the cutting deck from the left side of the tractor,

locate the bow-tie pin that secures the deck support rod on

the rear left side of the deck. See Fig. 7-2. Remove the bow-

tie pin that secures the deck support rod, and carefully

remove the deck support from the deck lift arm.

6. Repeat step 5 on the tractor's right side.

7. Move the deck lift lever into the top notch on the right

fender to raise the deck lift arms up and out of the way.

8.

Bow=Tie

//

/

/

/

/

/ /

/

Figure 7-2

Gently slide the cutting deck toward the front of the tractor

carefully guiding the hooks on the deck off of the deck

stabilizer rod. See Fig. 7-3

Figure 7=3

9. CarefullyremovethePTOcablefromtherearofthecuttingdeck

by removing the hair pin clip which secures it. Remove the

spring from the deck idler bracket. See Fig. 7-4 on the next

page.

10. Gently slide the cutting deck (from the leftside) out from

underneath the tractor.

Figure 7-4

Tires

_WARNING! Never exceed the maximum inflation

pressure shown on the sidewall of tire.

The recommended operating tire pressure is:

Approximately 10 psi for the rear tires

Approximately 14 psi for the front tires

IMPORTANT: Refer to the tire sidewall for exact tire

manufacturer's recommended or maximum psi. Do not

overinflate. Uneven tire pressure could cause the cutting deck to

mow unevenly.

Battery

CALIFORNIA PROPOSITION 65 WARNING!

Battery posts, terminals, and related accessories

contain lead and lead compounds, chemicals known

to the State of California to cause cancer and

reproductive harm. Wash hands after handling.

CAUTION: If removing the battery, disconnect the

NEGATIVE (Black) wire from it's terminal first,

followed by the POSITIVE (Red) wire. When re-

installing the battery, always connect the POSITIVE

(Red) wire its terminal first, followed by the

NEGATIVE (Black) wire.

JumpStarting

_ ARNING! Never jump start a damaged or frozen

battery. Be certain the vehicles do not touch, and

ignitions are off. Do not allow cable clamps to touch.

1. Connect positive (+) cable to positive post (+) of your

tractor's discharged battery.

2. Connect the other end of the cable to the (positive +) post

of the jumper battery.

3. Connect the second cable (negative -) to the other post of

the jumper battery.

4. Make the final connection on the engine block of the

tractor, away from the battery. Attach to a unpainted part

to assure a good connection.

_AUTION: If the jumper battery is installed on a

vehicle (i.e. car, truck), do NOT start the vehicle's

engine when jump starting your tractor.

5.

6.

Charging

Start the tractor (as instructed in the Operation section of

this manual).

Set the tractor's parking brake before removing the jumper

cables, in reverse order of connection.

WARNING! Batteries give off an explosive gas

while charging. Charge the battery in a well

ventilated area and keep away from an open flame

or pilot light as on a water heater, space heater,

furnace, clothes dryer or other gas appliances.

CAUTION: When charging your tractor's battery,

use only a charger designed for 12V lead-acid

batteries. Read your battery charger's Owner's

Manual prior to charging your tractor's battery.

Always follow its instructions and heed its warnings.

If your tractor has not been put into use for an extended period

of time, charge the battery as follows:

1. Set your battery charger to deliver a max of 10 amperes.

If your battery charger is automatic, charge the battery until the

charger indicates that charging is complete. If the charger is not

automatic, charge for no fewer than eight hours.

Fuse

One 20 AMP fuse is installed in your tractor's wiring harness to

protect the tractor's electrical system from damage caused by

excessive amperage.

If the electrical system does not function, or your tractor's engine

will not crank, first check to be certain that the fuse has not

blown. It can be found at the rear of the unit, underneath the

fender located by the battery.

_ ARNING! Always use a fuse with the same

amperage capacity for replacement.

SECTION7 -- SERVICE 23

Cutting Blades

WARNING! Shut the engine off and remove

ignition key before removing the cutting blade(s) for

sharpening or replacement. Protect your hands by

using heavy gloves when grasping the blade.

WARNING! Periodically inspect the blade and/or

spindle for cracks or damage, especially after you've

struck a foreign object. Do not operate the machine

until damaged components are replaced.

To remove the blades, proceed as follows.

1. Remove the deck from beneath the tractor, (refer to

Cutting Deck Removal earlier in this section) then gently

flip the deck over to expose its underside.

2. Place a block of wood between the center deck housing

baffle and the cutting blade to act as a stabilizer.

See Fig. 7-5.

3. Remove the hex flange nut that secures the blade to the

spindle assembly. See Fig. 7-5.

\\

Figure 7-6

NOTE:When replacing the blade, be sure to install the blade with

the side of the blade marked "Bottom" (or with a part number

stamped in it) facing the ground when the mower is in the

operating position.

CAUTION: Use a torque wrench to tighten the

blade spindle hex flange nut to between 70 Ibs-ft

and 90 Ibs-ft.

4. Toproperlysharpenthecutting blades,removeequalamounts

of metal from both ends of the blades along the cutting

edges, parallel to the trailing edge, at a 25 °- to 30 ° angle.

Always grind each cutting blade edge equally to maintain

proper blade balance. See Fig. 7-6.

_ AUTION: If the cutting edge of the blade has

previously been sharpened, or if any metal

separation is present, replace the blades with new

ones.

i_ii WARNING! A poorly balanced blade will cause

excessive vibration, may cause damage to the

tractor and/or result in personal injury.

5. Test the blade's balance using a blade balancer. Grind

metal from the heavy side until it balances evenly.

SECTION7-- SERVICE

Changingthe DeckBelt

WARNING! Be sure to shut the engine off, remove

ignition key, disconnect the spark plug wire(s) and

ground against the engine to prevent unintended

starting before removing the belt.

WARNING! All belts on your tractor are subject to

wear and should be replaced if any signs of wear are

present.

IMPORTANT: The V-belt found on your tractor is specially

designed to engage and disengage safely. A substitute (non-

OEM) V-belt can be dangerous by not disengaging completely.

For a proper working machine, use factory approved belts.

To change or replace the deck belt on your tractor, proceed as follows:

1. Lower the deck by moving the deck lift lever into the

bottom notch on the right fender.

2. Remove the belt guards by removing the self-tapping

screws that fasten them to the deck. See Fig. 7-7.

3. Remove the belt keeper rod from around the engine pulley.

_ARNING! Avoid the possibility of a pinching

injury. Do not place your fingers on the idler spring

or between the belt and a pulley while removing the

belt.

5. Remove the deck belt from around all pulleys, including

the deck idler pulley.

6. Route the new belt as shown in and Fig. 7-7.

7. Remount the belt guards removed earlier.

Changing the TransmissionDrive Belt

NOTE: Several components must be removed and special tools

(i.e. air/impact wrench) in order to change the tractor's drive belt.

See an authorized MTD Service Dealer to have your drive belt

replaced or phone Customer Support as instructed on page 2 for

information on ordering a Service Manual.

Belt Guard

©

Deck idler Pulley

Figure 7-7

J

SECTION7 -- SERVICE 25

Troubleshooting

Problem

Engine fails to start

Cause

PTO/Blade engaged.

Engine runs erratic

Engine overheats

2. Spark plug wire disconnected.

3. Fuel tankempty, or stale fuel.

4. Choke notactivated.

5. Faulty spark plug.

6. Blocked fuel line.

7. Engine flooded.

8. Parking brake notengaged

Remedy

1. Place knob (or lever) in disengaged (OFF)

position.

2. Connect wire to spark plug.

3. Fill tank with clean, fresh (less than 30 days

old) gas.

9. Throttle control lever not in correct starting

position.

1. Unit running with CHOKE activated.

4. Place the throttle control in CHOKE position.

5. Clean, adjust gap or replace plug.

6. Clean fuel line and replace fuel filter.

7. Crankengine with throttle in FAST position.

8. Engage parking brake.

Engine hesitates at high

RPM

Engine Idles rough

Excessive vibration

Mower will not mulch grass

Uneven cut

2. Spark plug wires loose.

3. Blocked fuel line or stale fuel.

4. Ventin gascap plugged.

5. Water or dirt in fuel system.

6. Dirty air cleaner.

1. Engine oil level low.

2. Air flow restricted.

1. Spark plug gap too close.

1. Spark plug fouled, faulty or gap too wide.

2. Dffty air cleaner.

1. Cutting blade loose or unbalanced.

2. Damaged or bent cutting blade.

1. Engine speed too low.

2. Wet grass.

3. Excessively high grass.

4. Dull blade.

1. Deck not leveled properly.

2. Dull blade.

3. Uneven tire pressure.

9. Place throttle leverto FAST position.

1. Move the throttle contol out of the CHOKE

position.

2. Connect and tighten spark plug wire.

3. Clean fuel line; fill tank with clean, fresh

gasoline and replace fuel filter, is so equipped.

4. Clear vent or replace cap if damaged.

5. Drain fuel tank. Refill wtth clean, fresh

gasoline.

6. Replace air cleaner paper element or clean

foam precleaner, is so equipped.

1. Fill crankcase with proper amount and

weight of oil.

2. Clean grass clippings and debris from around

the engine's cooling fins and blower housing.

1. Remove spark plug and resetthe gap.

1. Replace spark plug. Set plug gap.

2. Replace air cleaner element and/or clean

pre-cleaner, if so equipped.

1. Tighten blade and spindle. Balance blade.

2. Replace blade.

1. Place throttle in FAST (rabbit) position.

2. Do not mulch when grass is wet.

3. Mowonceata high cutting height, then

mow again at desired height or make a

narrower cutting swath.

4. Sharpen or replace blade.

1. Perform side-to-side deck adjustment.

2. Sharpen or replace blade.

3. Check tire pressure in all four tires.

ReplacementParts 9

DESCRIPTION PARTNO.

DriveBelt (MowingDeck)38" Deck 954-04062

DeckBlade(38" Deck) 942-0610A

DeckSpindle(38"Deck) 918-04474A

Battery 925-1707D

Tire (Front)13x 5 x 6 RoundShoulder 734-04372

Tire (Rear)18x 6.5 x 8 SquareShoulder 734-0294

FuelTankCap 751-0603A

FuelTankCap(CA Models) 751-10947

ThrottleControl/ChokeCable(SingleCylinderEngines) _ 746-04364

DischargeChuteAssembly38" Deck 931-1032B

Key 925-1745A

NOTE:This Operators Manual covers a range of product specifications for various models. Characteristics and features discussed and/

or illustrated in this manual may not be applicable to all models. MTD LLC reserves the right to change product specifications, designs

and equipment without notice and without incurring obligation.

NOTE: Download a complete Parts Manual free of charge at www.mtdproducts.com or phone (800) 800-7310 to purchase a Parts

Manual. Be sure to have your model number and serial number ready. These can be found on the model plate located under the seat.

Refer to page 2 for more information regarding locating your model and serial numbers.

27

Attachments&Accessories

Thefollowingattachmentsandaccessoriesarecompatiblefor ModelSeries700 LawnTractors.Seethe retailerfromwhichyou

_urchasedyourtractor,anauthorizedMTDServiceDealeror phone(800) 800-7310for informationregardingpriceandavailability.

CAUTION: ModelSeries700 LawnTractorsare NOTdesignedfor usewithany typeof ground-engagingattachments(e.g.

tiller or plow).Useof thistypeof equipmentWILLvoidthe tractor'swarranty.

OEM-190-607

OEM-190-183

OEM-190-032

DeluxeTractorSunshade

DeckWheel Kit38"

42" SnowThrower

OEM-19A-218 RearWeightBracketKit

11

29

FEDERAL and/or CALIFORNIA EMISSION CONTROL WARRANTY STATEMENT

YOUR WARRANTY RIGHTS AND OBLIGATIONS

MTDConsumerGroupInc,the UnitedStatesEnvironmentalProtectionAgency (EPA),and, forthose productscertifiedfor sale in the stateof California,the

CaliforniaAir ResourcesBoard(CARB)are pleasedto explainthe emission(evaporativeand/or exhaust)controlsystem(ECS) warrantyon youroutdoor 2006

andlater smalloff-roadspark-ignitedengine andequipment(outdoorequipmentengine)In California,new outdoorequipmentenginesmustbe designed,built and

equippedto meetthe State'sstringentanti-smogstandards(inotherstates, 1997andlater modelyear equipmentmustbedesigned,built, and equippedto meet

theU.S. EPAsmalloff-road, sparkignitionengineregulations.MTDConsumerGroupInc mustwarrantthe ECSonyour outdoorequipmentenginefor the periodof

timelisted belowprovidedtherehas been noabuse,neglector impropermaintenanceof outdoorequipmentengine.

YourECSmayincludeparts suchas thecarburetor,fuel-injectionsystem,the ignitionsystem,catalyticconverter,fueltanks,fuel lines,fuelcaps,valves,canisters,

filters,vaporhoses,clamps,connectors,andotherassociatedemission-relatedcomponents.

Wherea warrantableconditionexists, MTDConsumerGroupIncwill repairyouroutdoorequipmentengineat no cost to youincludingdiagnosis,partsand labor.

MAN UFACTURER'S WARRANTY COVERAGE:

Thisemissioncontrolsystemis warrantedfor two years.If anyemission-relatedpart onyour outdoorequipmentengineis defective,the partwill berepairedor

replacedby MTDCONSUMERGROUPINC.

OWNER'S WARRANTY RESPONSIBILITIES:

Asthe outdoorequipmentengineowner,you are responsiblefor performanceof the requiredmaintenancelisted inyour owner'smanual.MTDConsumerGroup

Inc recommendsthat you retainallreceiptscoveringmaintenanceon youroutdoorequipmentengine,butMTDConsumerGroupInc cannotdeny warrantysolely

forthe lackof receipts.

Asthe outdoorequipmentengineowner,you shouldhoweverbe awarethat MTDConsumerGroupInc maydenyyouwarrantycoverageifyour outdoorequipment

engineor a parthas faileddue to abuse,neglect,or impropermaintenanceor unapprovedmodifications.

Youare responsiblefor presentingyouroutdoorequipmentengineto MTDConsumerGroupInc'sdistributioncenterorservicecenteras soon asthe problem

exists.Thewarrantyrepairsshouldbecompletedin a reasonableamountof time, notto exceed30 days.If youhavea questionregardingyour warrantycoverage,

you shouldcontactthe MTDConsumerGroupIncService Departmentat 1-800-800-7310orvia emailat http://support.mtdproducts.com

GENERAL EMISSIONS WARRANTY COVERAGE:

MTDConsumerGroupIncwarrantsto the ultimatepurchaserand eachsubsequentpurchaserthat theoutdoorequipmentengineis: Designed,built and equipped

so asto conformwithall applicableregulations;and freefromdefects in materialsand workmanshipthatcausethe failureof a warrantedpart to be identicalin all

materialrespectsto that part as describedin MTDConsumerGroupInc'sapplicationfor certification.

The warrantyperiodbeginsonthedate theoutdoorequipmentengineisdeliveredto an ultimatepurchaserorfirst placedintoservice.The warrantyperiodistwo

years.

Subjectto certainconditionsand exclusionsasstatedbelow,the warrantyon emission-relatedparts is asfollows:

1. Any warrantedpart that is notscheduledfor replacementas requiredmaintenancein thewritten instructionssupplied,is warrantedforthe warrantyperiod

statedabove. Ifthe partfails duringthe periodof warrantycoverage,thepart will be repairedor replacedbyMTDConsumerGroupInc accordingto subsection

(4)below.Anysuchpart repairedor replacedunderwarrantywillbewarrantedfor the remainderof the period.

2. Any warrantedpart that isscheduledonly for regularinspectionin the writteninstructionssupplied is warrantedforthe warrantyperiodstatedabove.Anysuch

partrepairedor replacedunderwarrantywill bewarrantedforthe remainingwarrantyperiod.

3. Any warrantedpart that isscheduledfor replacementas requiredmaintenancein thewritten instructionssuppliedis warrantedfor the periodof timebeforethe

firstscheduledreplacementdatefor that part.If the partfails beforethefirst scheduledreplacement,the partwill berepairedorreplacedby MTDConsumer

GroupInc accordingto subsection(4) below.Anysuch partrepairedor replacedunderwarrantywill bewarrantedfor the remainderof the periodpriorto the

firstscheduledreplacementpointfor thepart.

4. Repairor replacementof any warrantedpart underthe warrantyprovisionshereinmustbeperformedat a warrantystationat no chargeto the owner.

5. Notwithstandingthe provisionsherein,warrantyservicesor repairswill beprovidedat allof our distributioncentersthatare franchisedto servicethe subject

enginesor equipment.

6. The outdoorequipmentengineownerwill notbe chargedfor diagnosticlaborthat isdirectlyassociatedwithdiagnosisof a defective,emission-relatedwar-

rantedpart, providedthat suchdiagnosticwork is performedat a warrantystation.

7. MTDConsumerGroupInc is liablefor damagesto otherengineor equipmentcomponentsproximatelycausedby a failure underwarrantyof any warranted

part.

8. Throughoutthe off-roadengineand equipmentwarrantyperiodstatedabove,MTDConsumerGroupInc will maintaina supplyof warrantedparts sufficientto

meetthe expecteddemandfor such parts.

9. Any replacementpart maybe usedinthe performanceof anywarrantymaintenanceor repairsand mustbeprovidedwithoutchargeto the owner.Suchusewill

notreducethe warrantyobligationsof MTDConsumerGroupInc.

10.Add-onor modifiedpartsthat are notexemptedbythe AirResourcesBoardmaynot beused.Theuse of any non-exemptedadd-onor modifiedpartsby the

ultimatepurchaserwill be groundsfor disallowinga warrantyclaims. MTDConsumerGroup Incwill notbeliable to warrantfailuresof warrantedparts caused

bythe useof a non-exemptedadd-onor modifiedpart.

WARRANTED PARTS:

The repairor replacementof any warrantedpart otherwiseeligiblefor warrantycoveragemaybe excludedfromsuchwarrantycoverageif MTDConsumerGroup

Inc demonstratesthatthe outdoorequipmentengine hasbeenabused,neglected,orimproperlymaintained,and thatsuchabuse,neglect,or impropermainte-

nancewasthe direct causeof the needfor repairor replacementof the part.Thatnotwithstanding,any adjustmentof a componentthat hasa factoryinstalled,

and properlyoperating,adjustmentlimitingdeviceisstill eligiblefor warrantycoverage.Further,the coverageunderthis warrantyextendsonlyto partsthat were

presentonthe off-roadengineand equipmentpurchased.

Thefollowing emissionwarrantypartsare covered(if applicable):

(1)FuelMeteringSystem

• Cold start enrichmentsystem(softchoke)

• Carburetorand internalparts (orfuel injectionsystem)

• Fuelpump

• Fueltank

(2)Air InductionSystem

• Aircleaner

• Intakemanifold

(3) IgnitionSystem

• Sparkplug(s)

• Magnetoignitionsystem

(4) ExhaustSystem

• Catalyticconverter

• SAI(Reed valve)

(5) MiscellaneousItemsUsedin AboveSystem

• Vacuum,temperature,position,timesensitivevalvesand switches

• Connectorsandassemblies

(6) EvaporativeControl

• Fuelhose

• Fuelhoseclamps

• Tetheredfuel cap

• Carboncanister

• Vapor lines

GDOC-100223

MANUFACTURER'S LiMiTED WARRANTY FOR

The limited warranty set forth below is given by MTD LLC with

respect to new merchandise purchased and used in the United States

and/or its territories and possessions, and by MTD Products Limited

with respect to new merchandise purchased and used in Canadaand/

or its territories and possessions (either entity respectively, "MTD").

"MTD" warrants this product (excluding its Normal WearParts and

Attachments as described below) against defects in material and

workmanship for a period of two (2) years commencing on the date

of original purchase and will, at its option, repair or replace, free of

charge, any part found to be defective in materials or workmanship.

This limited warranty shall only apply if this product has been

operated and maintained in accordance with the Operator's Manual

furnished with the product, and has not been subject to misuse,

abuse, commercial use, neglect, accident, improper maintenance,

alteration, vandalism, theft, fire, water, or damage because of other

peril or natural disaster. Damage resulting from the installation or use

of any part, accessory or attachment not approved by MTD for use

with the product(s) covered by this manual will void your warranty as

to any resulting damage.

Normal WearParts are warranted to be free from defects in material

and workmanship for a period of thirty (30) days from the date of

purchase. Normal wear parts include, but are not limited to items

such as: batteries, belts, blades, blade adapters, tines, grass bags,

wheels, rider deck wheels, seats, snow thrower skid shoes, friction

wheels, shave plates, auger spiral rubber and tires.

Attachments-- MTD warrants attachments for this product against

defects in material and workmanship for a period of one (1) year,

commencing on the date of the attachment's original purchase or

lease. Attachments include, but are not limited to items such as:

grass collectors and mulch kits.

HOWTO OBTAINSERVICE:Warranty service is available, WITH

PROOFOFPURCHASE,through your local authorized service dealer.

To locate the dealer in your area:

In the U.S.A.

Check your Yellow Pages, or contact MTD LLC at RO. Box 361131,

Cleveland, Ohio 44136-0019, or call 1-800-800-7310, 1-330-220-

4683 or log on to our Web site at www.mtdproducts.com.

In Canada

Contact MTD Products Limited, Kitchener, ON N2G4J1, or call 1-800-

668-1238 or log on to our Web site at www.mtdcanada.com.

This limited warranty does not provide coverage in the following

cases:

a. The engine or component parts thereof. These items may carry a

separate manufacturer's warranty. Referto applicable manufac-

turer's warranty for terms and conditions.

b. Log splitter pumps, valves, and cylinders havea separate one-

year warranty.

c. Routine maintenance items such as lubricants, filters, blade

sharpening, tune-ups, brake adjustments, clutch adjustments,

deck adjustments, and normal deterioration of the exterior finish

due to use or exposure.

d. Service completed by someone other than an authorized service

dealer.

e. MTD does not extend any warranty for products sold or exported

outside of the United States and/or Canada, and their respective

possessions and territories, except those sold through MTD's

authorized channels of export distribution.

f. Replacement parts that are not genuine MTD parts.

g. Transportation charges and service calls.

h. MTD does not warrant this product for commercial use.

No implied warranty, including any implied warranty of

merchantability of fitness for a particular purpose, applies after

the applicable period of express written warranty above as to the

parts as identified. No other express warranty, whether written or

oral, except as mentioned above, given by any person or entity,

including a dealer or retailer, with respect to any product,shall

bind MTD. Duringthe period of the warranty, the exclusive remedy

is repair or replacement of the product as set forth above.

The provisions as set forth inthis warranty providethe sole and

exclusive remedy arising from the sale. MTD shall not be liable

for incidental orconsequential loss or damage including, without

limitation, expenses incurred for substitute or replacement lawn

care services or for rental expenses to temporarily replace a

warranted product.

Some states do not allow the exclusion or limitation of incidental

or consequential damages, or limitations on how long an implied

warranty lasts, so the above exclusions or limitations may not apply

to you.

In no event shall recovery of any kind begreater than the amount of

the purchase price of the product sold. Alteration of safety features of

the product shall void this warranty. You assume the risk and liability

for loss, damage, or injury to you and your property and/or to others

and their property arising out of the misuse or inability to use the

product.

This limited warranty shall not extend to anyone other than the

original purchaser or to the person for whom it was purchased as a

gift.

HOWSTATELAW RELATESTOTHIS WARRANTY: This limited

warranty gives you specific legal rights, and you may also have other

rights which vary from state to state.

IMPORTANT: Owner must present Original Proof of Purchase to

obtain warranty coverage.

MTD LLC, P.O. BOX 361131 CLEVELAND, OHiO 44136=0019; Phone: 1=800=800=7310, 1=330=220=4683

MTD Canada Limited = KITCHENER, ON N2G 4J1; Phone 1=800=668=1238

GDOC-lO0015 REV. B