MTD 500, 510 770 10509E User Manual To The C139f094 E540 4c00 B7b8 454899dc350f
User Manual: MTD 500, 510 to the manual
Open the PDF directly: View PDF
Page Count: 16
- NOTE: Reference to right or left hand side of the log splitter is observed from the operating position.
- NOTE: High pressure hose must be above the tongue assembly on the log splitter.
- NOTE: Once the six hex screws are tightened, there may be a slight gap between the dislodger and the weld brackets. This gap is normal.
- NOTE: The reservoir tank has a capacity of 3.5 gallons.
- NOTE: Failure to refill the tank will void unit’s warranty.
- NOTE: Some fluid may overflow from the vented dipstick, or the vent plug, as the system builds heat and the fluid expands and seeks a balanced level.
- NOTE: Control handle will return to neutral position as soon as handle is released.(Forward Position only)
- NOTE: Reverse position may also be operated back to neutral position manually, if necessary.
- NOTE: Gasoline can be added to the engine when the log splitter is in either the horizontal or vertical position. However, there are less obstructions when the unit is in the vertical position.
- NOTE: Use caution when backing up. It is recommended to use a spotter outside the vehicle.
- NOTE: The gibs may be rotated and/or turned over for even wear.
- NOTE: Please dispose of used hydraulic fluid and engine oil at approved recycling centers only.
- NOTE: Make certain proper clearance is obtained before tightening set screw.
- NOTE: We do not recommend the use of pressure washers or garden hose to clean your unit. They may cause damage to the log splitter components, or the engine. The use of water will result in shortened life and reduce serviceability.
- NOTE: If storing in an unventilated or metal storage shed, be certain to rustproof the equipment by coating with a light oil or silicone.
- NOTE: For repairs beyond those listed above, contact your nearest authorized service center.
- NOTE: For repairs beyond those listed here, contact your nearest authorized service center.