MW McWong PSC-ID-M-FM400 5.8GHz Microwave Occupancy Sensor User Manual manual
MW McWong International Inc 5.8GHz Microwave Occupancy Sensor manual
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1730111 |
| Application ID | CANi/0LJdk0l72L523JlEQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 9.51kB (118874 bits) |
| Date Submitted | 2012-06-25 00:00:00 |
| Date Available | 2012-06-25 00:00:00 |
| Creation Date | 2012-05-15 15:49:03 |
| Producing Software | Nitro PDF PrimoPDF |
| Document Lastmod | 2012-05-15 15:49:03 |
| Document Title | Microsoft Word - manual |
| Document Creator | PrimoPDF http://www.primopdf.com |
| Document Author: | Annie_New |
5.8Ghz Doppler Sensor User Manual Incandescent:277VAC 1200W 4.3A Operating voltage 120-277 VAC/60HZ 120VAC 800w 6.7A Maximum load Operating Fluorescent:277VAC 600w 2.2A -5ºC~+45ºC Temperature 120VAC 400w 3.4A Standby consumption <0.9w Duration time Light control level 2LUX—2000LUX Setting height Detection angle wall mounting 180° Level of IP MIN：5S；MAX：30M Wall mounting 1.5-3M height Ceiling mounting 3-4M height Indoor use ceiling mounting360° WARM UP TIME About 20s,then go into auto mode after the light off Adjustabl detection wall mounting: range ceiling mounting: 2-12M radius 2-7M CONNECTION Neutral Out Hot DIP Switch FUNCTION sense Daylight Night Lux On=1 Off=0 time 5-7M 5s(test) 4-6M 30s 2-4M 1m 1-2M 3m 5m 10m 20m 30m 5.8G microwave sensor test method Test mode： ：turn sensitivity knob to MAX， ，turn time knob to MIN， ，turn LUX knob to Sun （work at daylight） ） ； Steps： ： 1． ． Put the sensor on wall at 1.5-3M height or on ceiling 3~4M height. Black wire connect to Hot ,white wire connect to Neutral ,Load connect between Out and Neutral.. 2. confirm 120-277VAC； ；than power on and light on； ； 3. The light off automatically and go into auto mode, after power on about 20s.Than you can start test。 。 4. When someone walk across or turn around at proper distance in front of the sensor,no matter it is transverse or longitudinal motion,the light will turn on.When the motion stops,the light will turn off after duration time 5 seconds.(Locate sensor testing area away from moving objects such as flapped curtain by wind).The data as sensitivity,detected distance/angle can be measured in this testing.If the sensitivity is too high,it can be adjusted by DIP switch and reduce the sensitivity.The sensitivity setting can be from 1.5 m to 7 m (radius)for ceilling mounting. User mode： ：select sensitivity ,time, lux you need。 。 Steps： ： 1. Repeat 1,2,3, steps above。 。 2. When someone walk across or turn around at proper distance in front of the sensor,no matter it is transverse or longitudinal motion,the light will turn on.The light will turn off in preset time after motion stops. 3. If there is a motion during light on,the time seting will be restart as your seting. DETECTION RANGE DRAFT sensor sensor 3-4M 6-8M 6-8M 6-8M 5.8Ghz microwave sensor range Ceiling mounting 3-4M height 6-8M sensor 6-8M 4-6M 12M 12M 5.8Ghz microwave sensor range Wall mounting 2.5M height 2.5M sensor MAX 12M This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modification cautions to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 3 Producer : Nitro PDF PrimoPDF Create Date : 2012:05:15 15:49:03+07:00 Modify Date : 2012:05:15 15:49:03+07:00 Title : Microsoft Word - manual Creator : PrimoPDF http://www.primopdf.com Author : Annie_NewEXIF Metadata provided by EXIF.tools