MYLAPS PROCHIPFLEX Low Power Transponder User Manual 2013 01 ProChip FLEX QR Manual
MYLAPS BV Low Power Transponder 2013 01 ProChip FLEX QR Manual
MYLAPS >
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1874789 |
| Application ID | 4FqeQAPp8zihj3DzUOPr0A== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 30.62kB (382745 bits) |
| Date Submitted | 2013-01-07 00:00:00 |
| Date Available | 2013-01-07 00:00:00 |
| Creation Date | 2013-01-04 14:37:42 |
| Producing Software | Acrobat Elements 8.0.0 (Windows) |
| Document Lastmod | 2013-01-04 14:55:25 |
| Document Title | 2013_01 ProChip FLEX QR Manual.book |
| Document Creator | FrameMaker 8.0 |
| Document Author: | eveer |
ProChip FLEX Transponder & ProChip FLEX Manager Quick Reference TABLE OF CONTENTS ACTIVATE TRANSPONDER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . REFERENCES & DECLARATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1 References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2 CE Declaration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3 FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MYLAPS EMEA Office Haarlem The Netherlands Tel: +31 23 7600 100 E-mail: info@mylaps.com MYLAPS AMERICAS Office Atlanta USA Tel: +1 678 816 4000 E-mail: info.americas@mylaps.com MYLAPS ASIA PACIFIC Office Sydney Australia Tel: +61 2 9546 2606 E-mail: info.asia.pacific@mylaps.com MYLAPS Japan Office Tokyo Japan Tel: +81 3 6418 8209 Email: info.japan@mylaps.com www.mylaps.com Published by: MYLAPS B.V. Zuiderhoutlaan 4 2012 PJ Haarlem The Netherlands © 2013 No part of this document may be reproduced by any means without the written consent of the publisher. Whilst every care has been taken to ensure that the information in this document is correct, no liability can be accepted by MYLAPS for loss, damage or injury caused by any errors or omissions in this document. Version: 2013-01 ProChip FLEX Transponder & ProChip FLEX Manager Quick Reference Page 2 1 ACTIVATE TRANSPONDER Download software from: http://flex.mylaps.com Install software The software installs ProChip FLEX Manager and the driver for the ProChip FLEX Transponder. Start ProChip FLEX Manager ProChip FLEX Manager will automatically try to find a connected ProChip FLEX Transponder Connect the ProChip FLEX transponder to a USB connector on the computer Activate your transponder by pressing the ‘ACTIVATE’ button in ProChip FLEX Manager NOTE: For more information on activating the ProChip FLEX Transponder, refer to the ProChip FLEX Transponder & ProChip FLEX Manager User Manual, or go to http://flex.mylaps.com ProChip FLEX Transponder & ProChip FLEX Manager Quick Reference Page 3 2 OPERATION Your MYLAPS ProChip FLEX Transponder is INACTIVE when shipped to you. Refer to chapter 1 Activate transponder on page 3 for how to activate it with the ProChip FLEX Manager software. Once activated, see following operation steps: • Cleaning - Clean your transponder regularly as described in 2.1 Cleaning • Usage - Use transponder as described in 2.2 Usage 2.1 Cleaning The MYLAPS ProChip FLEX transponder should only be cleaned by a moist lint-free cloth or soft brush that has been slightly dampened with pure lukewarm water; the drying can be done by air dry (up to 25 degrees Celsius) or with a dry lint-free cloth. CAUTION: Never use high pressure waterguns, automotive cleaning products, detergents, dishwashers or washing machines. The neoprene ankle strap can only be cleaned by washer 3 times at max. 40 degrees Celsius and cannot be tumble dried. We recommend only to rinse the ankle strap with cold or lukewarm clear water and let it air dry. NOTE: If you wash the neoprene ankle strap more than 3 times by washer or if you throw the strap in the tumble dryer, the laminated layer will get separated from the neoprene and the ankle strap will shrink! 2.2 Usage Either attach your ProChip FLEX Transponder to the neoprene strap and put it around your ankle or use the MYLAPS Bike Holder (sold separately) to attach the ProChip FLEX Transponder to your bicycle. Always check the required mounting instructions before each race with the race organisation. WARNING: Loose transponders are dangerous and can cause serious accidents. MYLAPS cannot be held responsible for any injuries or accidents caused by improper mounted ProChip FLEX Transponders. Regularly check the ProChip FLEX transponder LED for subscription and battery status: - Shake the ProChip FLEX Transponder for 10 seconds; - Place the ProChip FLEX Transponder on a completely stationary surface for 10 seconds; - The ProChip FLEX Transponder will give you 2 blinks: * First blink is for the subscription: - GREEN: Subscription OK - RED: Subscription expired * Second blink is for the battery status: - GREEN: Battery OK - RED: Battery low To access your timing results check www.mylaps.com ProChip FLEX Transponder & ProChip FLEX Manager Quick Reference Page 4 3 REFERENCES & DECLARATIONS 3.1 References To download the ProChip FLEX Manager software, please go to http://flex.mylaps.com. To download the ProChip FLEX Transponder & ProChip FLEX Manager user manual, please go to http://flex.mylaps.com. To download the ProChip FLEX Quick Start Guide, please go to http://flex.mylaps.com. To check the Frequently Asked Questions (FAQs), please go to http://flex.mylaps.com. 3.2 CE Declaration This device complies with the EMC directive 2006/95/EC, 2004/108/EC, 1999/5/EC. A copy of the declaration of conformity can be obtained at: MYLAPS Sports Timing Zuiderhoutlaan 4 2012 PJ Haarlem The Netherlands 3.3 FCC Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. ProChip FLEX Transponder & ProChip FLEX Manager Quick Reference Page 5
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Page Mode : UseOutlines XMP Toolkit : Adobe XMP Core 4.0-c320 44.290956, Sun Jun 17 2007 17:22:19 Format : application/pdf Title : 2013_01 ProChip FLEX QR Manual.book Creator : eveer Create Date : 2013:01:04 14:37:42Z Creator Tool : FrameMaker 8.0 Modify Date : 2013:01:04 14:55:25+01:00 Metadata Date : 2013:01:04 14:55:25+01:00 Producer : Acrobat Elements 8.0.0 (Windows) Document ID : uuid:1ef74118-a6d1-44d9-8abd-f7fb54f795aa Instance ID : uuid:b3aebbe0-3767-4178-b3d8-2437315270e8 Page Count : 5 Author : eveerEXIF Metadata provided by EXIF.tools