Mad Catz D232266A3713C GameSmart C.T.R.L.R User Manual 32266 MUG 13SEP13

Mad Catz, Inc. GameSmart C.T.R.L.R 32266 MUG 13SEP13

Users Manual - part 2 of 2

.8
LED INDICATORS
INITIAL SETUP
1. Insert fresh batteries into the battery compartment
2. Ensure the controller is OFF (no LED lights)
3. Set Mode Switch to one of below modes:
When connecting to Windows PC or Mac OS X, set Mode Switch to:
When connecting to Android OS/M.O.J.O. console, set Mode Switch to:
Product is connected to a device
but battery is low
Product is connecting to a device
Pairing Info is removed
Product is connected to a device
BLINKING RED
SOLID PURPLE
SOLID RED
BLINKING BLUE
Product is ON and not
connected to a device
BLINKING BLUE TO RED
CONNECTING VIA BLUETOOTH
1. Press and hold the “Home” button on the controller until its LED blinks blue and red
2. Ensure Bluetooth is enabled on your phone, M.O.J.O. console, tablet or computer
3. Select ‘search for devices’ on your device
4. Choose ‘Mad Catz C.T.R.L. R’ under the Device List to connect
5. Once connected, the LED indicator will blink blue. The controller is ready to use
.9
SETUP INSTRUCTIONS
MOUSE MODE
R1
L1
R2
R1
L2
L1
R2L2
MOUSE Y AXIS
HOME
ESC
ENTER
MIDDLE CLICK
SPACE BAR
RIGHT CLICK
LEFT CLICK
SCROLL UP
SCROLL DOWN
MOUSE X AXIS
1. When the controller is connected via Bluetooth, it can also be used as a mouse control for your connected device
2. Set the Mode Switch to and use the left analog stick and shoulder buttons to navigate the device
R2
R1
L2
L1
L2
SHOULDER BUTTONS
Left Click
Shift Backspace /
Internet browser back
R1
L1
R2
R1
L2
L1
R2L2
R1
L1
R2
R1
L2
L1
R2L2
R1
L1
R2
R1
L2
L1
R2L2
R1
L1
R2
R1
L2
L1
R2L2
Right Click
Shift & Spacebar /
Internet browser page up
R1
L1
R2
R1
L2
L1
R2L2
R1
L1
R2
R1
L2
L1
R2
L2
R1
L1
R2
R1
L2
L1
R2
L2
R1
L1
R2
R1
L2
L1
R2
L2
Shift & Backspace /
Internet browser forward
Spacebar /
Internet browser page down
.10
SETUP INSTRUCTIONS
UNPAIRING THE DEVICE
TURNING THE DEVICE ON/OFF
1. Press and hold the “Start” button for five seconds until the LED shines red. The LED will then blink blue and red indicating
paired info is removed and the controller is back in discovery mode
2. Go into Bluetooth Settings, select ‘Mad Catz C.T.R.L.R’ and choose to ‘Forget the Device’
Press and hold the “Home” button on the controller for 3 seconds.
MAD CATZ A.P.P. PROGRAMMING SOFTWARE
1. Follow the above instructions for connecting to a Windows PC, or Mac OS X
2. Download and install the desktop software from www.madcatz.com/downloads
This software enables controller programming.
.11
FIRMWARE UPDATES
The C.T.R.L. R is firmware upgradeable and future-proofed against upcoming developments in Bluetooth/mobile gaming.
As Bluetooth Smart becomes more widely implemented on mobile devices, Mad Catz will release an update that will enable your C.T.R.L. R to
intelligently determine connectivity to your devices. With the addition of Bluetooth Smart, the C.T.R.L. R gains reduced latency and increased
battery life.
When Android 5.0 and/or Bluetooth 4.1 are enabled on your device, check www.madcatz.com for announcements on our firmware update
software, and how you can get more out of your GameSmart C.T.R.L. R.
*Cable not included
EN
FCC & IC WARNING
This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS stan¬dard (s). Operation is subject to the following two condi-
tions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC RADIATION EXPOSURE STATEMENT:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or trans¬mitter.
IC RF EXPOSURE STATEMENT:
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain
Canadian information on RF exposure and compliance.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that, the equivalent
isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
EU DECLARATION OF CONFORMITY:
As required, certain of these products have been tested and conform to the requirements of the European Union Directives 2002/95/EC, 2002/96/EC, and
2004/108/EC. Authorized signatory of the manufacturer is Mad Catz, Inc., 7480 Mission Valley Road, Suite 101, San Diego, CA 92108.
FR
AVERTISSEMENT DE LA FCC & IC (INDUSTRY CANADA)
Cet appareil répond aux exigences de la section 15 de la réglementation FCC et aux normes RSS sans licence d’Industry Canada. Son fonctionnement est
soumis aux deux conditions suivantes : (1) Ce périphérique ne doit pas provoquer d’interférences nuisibles et (2) il doit accepter toute inter¬férence reçue, y
compris les interférences susceptibles de causer un dysfonctionnement.
Tout changement ou toute modification n’ayant pas été expressément approuvé(e) par l’entité responsable de la conformité peut annuler le droit de l’utilisateur
à se servir de cet équipement.
DÉCLARATION DE LA FCC RELATIVE À L’EXPOSITION AU RAYONNEMENT ÉLECTROMAGNÉTIQUE :
Ce matériel est conforme aux exigences de la FCC relatives aux limites d’exposition au rayonnement établies dans le cadre d’un environnement non contrôlé.
Cet émetteur ne doit pas être combiné à ou fonctionner simultanément avec une autre antenne ou un autre émetteur.
DÉCLARATION D’IC RELATIVEMENT AUX RADIOFRÉQUENCES :
Cet appareil répond aux exigences lui permettant d’être exempté des limites de l’évaluation de routine exposées à la section 2.5 de la norme RSS 102 et est
conforme aux limites d’exposition aux RF établies par la norme RSS-102. Les utilisateurs peuvent obtenir des informations du gouvernement canadien relatives
à l’exposition aux RF et à la conformité.
Conformément à la réglementation d’Industry Canada, cet émetteur radio doit uniquement fonctionner à l’aide d’une antenne dont le type et le gain maximum
(ou moindre) ont été jugés aptes au fonctionnement avec l’émetteur par Industry Canada. Pour réduire le risque d’interférence radio pour les autres utilisa-
teurs, le type d’antenne et son gain doivent être choisis de façon à ce que la puissance isotrope rayonnée équivalente (PIRE) ne dépasse pas celle nécessaire
pour une bonne communication.
DÉCLARATION DE CONFORMITÉ DE L’UE
Comme exigé, certains de ces produits ont été testés et sont conformes aux exigences aux directives de l’Union Européenne 2002/95/EC, 2002/96/EC, et
2004/108/EC. Le signataire autorisé du constructeur est Mad Catz, Inc., 7480 Mission Valley Road, Suite 101, San Diego, CA 92108.
©2013 Mad Catz, Inc. 7480 Mission Valley Road, Suite 101, San Diego, CA 92108 U.S.A. Mad Catz, C.T.R.L.R. , GameSmart, and the Mad Catz logo are trademarks
or registered trademarks of Mad Catz Interactive, Inc., its subsidiaries and affiliates. The shape and design of this product are a trade dress of Mad Catz
Interactive, Inc., its subsidiaries and affiliates. Android is a trademark of Google Inc. The Android robot is reproduced or modified from work created and shared
by Google and used according to terms described in the Creative Commons 3.0 Attribution License. Android is a trademark of Google Inc. NVIDIA, the NVIDIA
logo, and TEGRA are trademarks and/or registered trademarks of NVIDIA Corporation in the U.S. and/or other countries. All other product names and images are
trademarks or registered trademarks of their respective owners. Made in China. All rights reserved. Product features, appearance and specifications may be
subject to change without notice.
Please retain this information for future reference.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Mad Catz, Inc. is under license. Other trademarks and
trade names are those of their respective owners.
©2013 Mad Catz Europe, Ltd. 1-2 Shenley Pavilions, Chalkdell Drive. Shenley Wood, Milton Keynes, Buckinghamshire MK5 6LB, Royaume-Uni (UK). Mad Catz,
C.T.R.L.R., GameSmart, et le logo Mad Catz sont des marques de commerce ou des marques déposées de Mad Catz Interactive, Inc., de ses filiales et sociétés
affiliées. La forme et le design de ce produit sont caractéristiques de la marque Mad Catz Interactive, Inc., de ses filiales et sociétés affiliées. Android est une
marque commerciale de Google Inc. Le robot Android est reproduit ou modifié d’après le travail créé et partagé par Google et utilisé selon les termes décrits
dans le Creative Commons 3.0 Attribution License. Android est une marque commerciale de Google Inc. NVIDIA, le logo NVIDIA, et TEGRA sont des marques
commerciales et / ou des marques déposées de NVIDIA Corporation aux États-Unis et / ou dans d’autres pays. Tous les autres noms et images de produits sont
des marques de commerce ou des marques déposées de leurs propriétaires respectifs. Fabriqué en Chine. Tous droits réservés. L’aspect, les fonctionnalités et
les spécifications du produit peuvent changer sans préavis. Veuillez conserver cette notice pour référence ultérieure.
Le mot, la marque et les logos Bluetooth® sont la propriété de Bluetooth SIG, Inc. Et toute utilisation de ces marques par Mad Catz, Inc. est faite sous licence.
Les autres marques de commerce et les autres appellations commerciales appartiennent à leurs propriétaires respectifs.
Mad Catz is a publicly traded company on the TSX/NYSE MKT, symbol MCZ.
Mad Catz ist ein börsennotiertes Unternehmen (TSX, NYSE MKT: MCZ).
Les actions de Mad Catz sont cotées en bourse sur le TSX/NYSE MKT sous le symbole MCZ.
FCC ID: P25D243710A4512C
IC: 4633A-43710AC
FCC ID: VHVBTVD1154
IC: 4633A-43710AR
R 211-121005
MOUSE DONGLE
KCC-CRM-MAD-43710C KCC-4633A-43710R
R 211-121008

Navigation menu