Magnavox Zv420Mw8 Owners Manual
ZV420MW8 to the manual 104fc339-06e6-4193-9e46-be1c7f19dd74
2015-01-05
: Magnavox Magnavox-Zv420Mw8-Owners-Manual-166494 magnavox-zv420mw8-owners-manual-166494 magnavox pdf
Open the PDF directly: View PDF .
Page Count: 1
Download | |
Open PDF In Browser | View PDF |
Introduction Owner's Manual Playback INSTRUCCIONES EN ESPAÑOL INCLUIDAS. Recording NEED HELP FAST? READ YOUR QUICK GUIDE AND/OR OWNER'S MANUAL FIRST FOR QUICK TIPS THAT MAKE USING YOUR MAGNAVOX PRODUCT MORE ENJOYABLE. IF YOU HAVE READ YOUR INSTRUCTIONS AND STILL NEED ASSISTANCE, YOU MAY ACCESS OUR ONLINE HELP AT HTTP://WWW.FUNAI-CORP.COM OR CALL 1-800-605-8610 WHILE WITH YOUR PRODUCT. Basic Setup THANK YOU FOR CHOOSING MAGNAVOX. Connections ZV420MW8 DIGITAL VIDEO DISC RECORDER WITH VIDEO CASSETTE RECORDER Editing Function Setup VCR Functions Others Español © 2007 Funai Electric Co., Ltd. PRECAUTIONS WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM. LOCATION: INSIDE, NEAR THE DECK MECHANISM. 2 EN Important Safeguards Basic Setup Recording Playback Editing Function Setup VCR Functions Others 12. Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 13. Lightning - For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power-line surges. 14. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 15. Overloading - Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 16. Object and Liquid Entry - Never push objects of any kind into this product through any openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 17. Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 18. Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the product. c. If the product has been exposed to rain or water. d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. e. If the product has been dropped or damaged in any way. f. When the product exhibits a distinct change in performance this indicates a need for service. 19. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 20. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 21. Heat - This product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. Connections Español 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions- The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed. 5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5. 6. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards. 7. Water and Moisture- Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. 8. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the appliance should follow the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. 9. Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 10. Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. 11. Grounding or Polarization - This product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. Introduction PRECAUTIONS EN 3 PRECAUTIONS Installation Location For safety and optimum performance of this unit: • Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV. • Shield it from direct sunlight and keep it away from devices of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes on the sides of the unit. Avoid locations subject to strong vibration or strong magnetic fields. Supplied Accessories remote control (NB552UD) with batteries (AAAx2) RCA audio/video cables (WPZ0102TM015/WPZ0102LTE01) Avoid the Hazards of Electrical Shock and Fire • Do not handle the power cord with wet hands. • Do not pull on the power cord when disconnecting it from AC outlet. Grasp it by the plug. • If, by accident, water is spilled on this unit, unplug the power cord immediately and take the unit to our Authorized Service Center for servicing. owner's manual (1VMN23495) Moisture Condensation Warning Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place or after heating a cold room or under conditions of high humidity. Do not use this unit at least for 2 hours until its inside gets dry. quick guide (1VMN23496) About Copyright Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. Notice for Progressive Scan Output Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of picture problems with 525 (480) progressive scan output, it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions regarding your TV set compatibility with this 525p (480p) DVD player, please contact our customer service center. 4 EN Maintenance Servicing Cleaning the cabinet Cleaning discs Cleaning the disc lens Disc handling • With a digital camera (including built-in camera of cellular phone): Direct a digital camera to remote control, press and hold a button on remote control. If infrared light appears through digital camera, the remote control is working. Editing • Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs. • Always store the disc in its protective case when it is not used. • With an AM radio: Tune an AM radio to a station with no broadcasting. Press a button on remote control toward the radio. Sound will be fluttering when you press any key and the radio receives the signal. This means the remote control is working. Playback • If this unit still does not perform properly although you refer to the relevant sections and to “TROUBLESHOOTING” in this owner's manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit. If the remote control does not work properly, you can test if the remote control sends out the infrared signal with AM radio or a digital camera (including built-in camera of cellular phone). It will help to define the cause of malfunction. Recording • When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion. • Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analog records. IR signal check Basic Setup • Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasive. 1. Please visit your local Audio/Video store and purchase a good quality VHS video head cleaner. 2. If a video head cleaner does not solve the problem, please consult your dealer or an Authorized Service Center. Note • Remember to read the instructions along with the video head cleaner before use. • Clean video heads only when problems occur. Connections • Please refer to relevant topics on “TROUBLESHOOTING” on pages 82-86 before returning the product. • If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug and please call our help line mentioned on the front page to locate an Authorized Service Center. Introduction PRECAUTIONS Auto head cleaning Function Setup • Automatically cleans video heads as you insert or remove a cassette, so you can see a clear picture. • Playback picture may become blurred or interrupted while the TV program reception is clear. Dirt accumulated on the video heads after a long period of use, or the usage of rental or worn tapes can cause this problem. If a streaky or snowy picture appears during playback, the video heads in your unit may need to be cleaned. VCR Functions Others Español EN 5 CONTENTS Introduction PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Symbols Used in this Owner's Manual . . . . . . . . . . . . . . .7 FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . 8 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Front Panel Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Connections CONNECTION TO AN EXTERNAL TUNER. . . . . . . . . . . SETTINGS FOR THE VIDEO INPUT. . . . . . . . . . . . . . . . . CONNECTION TO A TV. . . . . . . . . . . . . . . . . . . . . . . . . . . CONNECTION TO AN AUDIO SYSTEM . . . . . . . . . . . . . 13 14 15 16 Basic Setup THE VCR / DVD RECORDER SWITCHING . . . . . . . . . . . GUIDE TO ON-SCREEN DISPLAYS AND MENUS . . . . On-Screen Display / Menu . . . . . . . . . . . . . . . . . . . . . . . . . Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INITIAL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SETTING THE CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . Clock Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 18 18 19 20 21 21 Recording INFORMATION ON DVD RECORDING . . . . . . . . . . . . . BEFORE RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . Make Recording Compatible . . . . . . . . . . . . . . . . . . . . . . Setting for Auto Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . BASIC RECORDING & ONE-TOUCH TIMER RECORDING . . . . . . . . . . . . . . . . . TIMER RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hints for Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . SATELLITE LINK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . OVERWRITING UNNECESSARY TITLE . . . . . . . . . . . . . Overwriting from the Beginning of the Title. . . . . . . . Overwriting in the Middle of the Title . . . . . . . . . . . . . . Hints for Overwriting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EXTERNAL DEVICE RECORDING . . . . . . . . . . . . . . . . . . Connection to an External Device. . . . . . . . . . . . . . . . . . Recording from an External Device . . . . . . . . . . . . . . . . SETTING A DISC TO PROTECT . . . . . . . . . . . . . . . . . . . . PLAYING THE DISCS IN OTHER DVD PLAYERS . . . . . Finalizing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Auto Finalizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DUBBING MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 23 23 23 24 26 29 30 32 32 32 33 34 34 35 36 37 37 38 39 Playback INFORMATION ON PLAYBACK . . . . . . . . . . . . . . . . . . . BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Direct Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Playback from the Title List . . . . . . . . . . . . . . . . . . . . . . . . Playing Back an Audio CD and a CD-RW/-R with MP3 Files . . . . . . . . . . . . . . . . . . . . . . . . Using the Title / Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SPECIAL PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Resume Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fast Forward / Fast Reverse Playback . . . . . . . . . . . . . . Skipping TV Commercials During Playback. . . . . . . . . Rapid Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 EN 41 42 42 43 45 46 46 47 47 47 47 48 Step by Step Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Slow Forward / Slow Reverse Playback. . . . . . . . . . . . . Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Marker Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Title / Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Time Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . REPEAT / RANDOM / PROGRAM PLAYBACK . . . . . . . Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Program Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SELECTING THE FORMAT OF AUDIO AND VIDEO . . Switching Subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Switching Audio Soundtrack . . . . . . . . . . . . . . . . . . . . . . Switching Virtual Surround System . . . . . . . . . . . . . . . . Switching Camera Angles . . . . . . . . . . . . . . . . . . . . . . . . . Reducing Block Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 48 49 49 50 50 50 51 52 52 52 53 54 54 54 55 55 55 Editing INFORMATION ON DISC EDITING. . . . . . . . . . . . . . . . . Guide to a Title List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Editing Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EDITING DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Deleting Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Putting Names on Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting Chapter Marks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Clearing Chapter Marks . . . . . . . . . . . . . . . . . . . . . . . . . . . Hiding Chapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting Pictures for Thumbnails. . . . . . . . . . . . . . . . . . . . Dividing a Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Putting Name on Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting or Releasing Disc Protect . . . . . . . . . . . . . . . . . . Erasing Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Making Edits Compatible . . . . . . . . . . . . . . . . . . . . . . . . . . 56 56 56 57 57 58 59 60 62 63 64 65 66 67 68 Function Setup LIST OF SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SETUPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reset All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 71 71 75 76 78 VCR Functions VCR FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . One-touch Timer Recording (OTR) . . . . . . . . . . . . . . . . . Index Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Time Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Other Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 79 79 80 80 81 81 Others TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . LANGUAGE CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 86 87 88 89 Español ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . Back cover Introduction FEATURES Connections Basic Setup Recording Playback Editing Function Setup Symbol Description For Recording, Playing Back, and Editing Description refers to DVD+RW Description refers to DVD+R VCR Functions For Playback only Others Description refers to audio CD Description refers to video CD with PBC function Description refers to video CD without PBC function EN Español Description refers to CD-RW/-R with MP3 files 7 FUNCTIONAL OVERVIEW Front Panel 1 23 22 21 2019181716 2* 15 3 14 13 121110 9 8* 7 6 5 4 (*) The unit can also be turned on by pressing these buttons or insert a cassette tape. 1. Cassette compartment (VCR) Insert a cassette tape here. 2. OPEN/CLOSE A button (DVD)* Press to open or close the disc tray. 3. Disc tray (DVD) Place a disc when it is open. 4. AUDIO input jacks (E2) (DVD/VCR) Use to connect external device with a RCA audio cable. 5. VIDEO input jack (E2) (DVD/VCR) Use to connect external device with a RCA video cable. 6. S-VIDEO input jack (E2) (DVD/VCR) Use to connect the S-video output of external device with an S-video cable. 7. RECORD I button (DVD) Press once to start recording. Press repeatedly to start the one-touch timer recording. 8. PLAY B button (DVD)* Press to start or resume playback. 9. STOP C button (DVD) Press to stop playback or recording. Press to stop the proceeding timer recording in DVD. 10. DVD indicator Lights up when the DVD output mode is selected. 11. SOURCE button (DVD/VCR) Press to select the component you wish to operate. 12. VCR indicator Lights up when the VCR output mode is selected. 13. D.DUBBING button (DVD/VCR) Press to start VCR to DVD (DVD to VCR) duplication which you set in the main menu. 8 EN 14. TRACKING L / K buttons (VCR) Press to adjust the tracking during playback or in slow motion of the cassette tape. While playback is in still mode, you can adjust the picture blurred vertically. 15. Display Refer to “Front Panel Display” on page 12. 16. Infrared sensor window (DVD/VCR) Receive signals from your remote control so that you can control the unit from a distance. 17. RECORD I button (VCR) Press once to start a recording. Press repeatedly to start the one-touch timer recording. 18. PLAY B button (VCR) Press to start playback. 19. STOP C / EJECT A button (VCR) EJECT A button When the unit is in stop mode, press to remove the cassette tape from the cassette compartment. STOP C button Press to stop cassette tape playback or recording. Press to stop the proceeding timer recording in VCR. 20. F.FWD D button (VCR) Press to rapidly advance the cassette tape, or view the picture rapidly in forward during playback (forward search). 21. REW E button (VCR) Press to rewind the cassette tape, or to view the picture rapidly in reverse during playback (rewind search). 22. STANDBY-ON y button (DVD/VCR) Press to turn on and off the unit. 23. POWER ON indicator (DVD/VCR) Red LED lights up when power is on. Introduction FUNCTIONAL OVERVIEW Rear Panel 1 DVD AUDIO S-VIDEO COMPONENT VIDEO OUT OUT S-VIDEO DVD/VCR IN --- AUDIO --- OUT L L IN R R Y L OUT PB /CB COAXIAL IN ---VIDEO --- OUT R 9 8 7 6 5 43 2 7. COMPONENT VIDEO OUT jacks (DVD only) Use to connect a TV monitor with component video inputs with a component video cable. 8. S-VIDEO OUT jack (DVD only) Use to connect the S-video input of a TV monitor, AV receiver or other device with an S-video cable. 9. AUDIO OUT jacks (DVD only) Use to connect a TV monitor, AV receiver or other device with a RCA audio cable. 10. COAXIAL DIGITAL AUDIO OUT jack (DVD only) Use to connect an AV receiver, Dolby Digital decoder or other device with a coaxial digital input jack with a digital coaxial cable. Recording Playback 1. AC Power Cord (DVD/VCR) Connect to a standard AC outlet to supply power to this unit. 2. AUDIO OUT jacks (DVD/VCR) Use to connect a TV monitor, AV receiver or other device with a RCA audio cable. 3. VIDEO OUT jack (DVD/VCR) Use to connect a TV monitor, AV receiver or other device with a RCA video cable. 4. VIDEO IN jack (E1) (DVD/VCR) Use to connect external device with a RCA video cable. 5. AUDIO IN jacks (E1) (DVD/VCR) Use to connect external device with a RCA audio cable. 6. S-VIDEO IN jack (E1) (DVD/VCR) Use to connect the S-video output of external device with an S-video cable. PR /CR Basic Setup 10 Connections DIGITAL AUDIO OUT Note Editing • Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. Function Setup VCR Functions Others Español EN 9 FUNCTIONAL OVERVIEW Remote Control Installing the Batteries in the Remote Control Install the batteries (AAAx2) matching the polarity indicated inside battery compartment of the remote control. Using a Remote Control Keep in mind the following when using the remote control: • Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit. • Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the infrared sensor window of the unit. • Remote control for different devices can interfere with each other. Avoid using remote control for other device located close to the unit. • Replace the batteries when you notice a fall off in the operating range of the remote control. • The maximum operable ranges from the unit are as follows. - Line of sight: approx. 23 feet (7m) - Either side of the center: approx. 16 feet (5m) within 30° - Above: approx. 16 feet (5m) within 15° - Below: approx. 10 feet (3m) within 30° 16feet (5m) 30˚ 23feet (7m) 16feet (5m) 30˚ STANDBY-ON SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR 0 DISC MENU SETUP o OK s B TITLE RETURN Note Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following: • Do not mix new and old batteries together. • Do not use different kinds of batteries together. Although they may look similar, different batteries may have different voltages. • Make sure that the + and - ends of each battery match the indications in the battery compartment. • Remove batteries from battery compartment that is not going to be used for a month or more. • When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area. • Do not recharge, short-circuit, heat, burn or disassemble batteries. 10 EN p B j F h i g C TRACKING -- + VCR REC DVD REC MODE D.DUBBING AUDIO I CM SKIP SEARCH RAPID PLAY NB552 Basic Setup Recording Playback Editing Function Setup 20. CLEAR button (DVD/VCR) DVD mode: Press to clear the password once entered or to cancel the programming for CD or to clear the selecting marker number in the edit menu, etc. VCR mode: Press to reset the tape counter. 21. SETUP button (DVD/VCR) • Press to display the main menu. • During DVD playback, press and hold for more than 3 seconds to switch the progressive scanning mode to the interlace mode. 22. Cursor K / L / { / B buttons (DVD/VCR) Press to select items or settings. 23. RETURN button (DVD/VCR) Press to return to the previously displayed menu screen. 24. PLAY B button (DVD/VCR) Press to start or resume playback. 25. NEXT G button (DVD) • During playback, press to skip to the next chapter, track or file. • When playback is paused, press to play back forward step by step. 26. FFW D button (DVD/VCR) DVD mode: • During playback, press to play back fast forward. • When playback is paused, press to play back slow forward. VCR mode: • During playback, press to rapidly advance the cassette tape or view the picture rapidly in forward. • When playback is paused, press to view the cassette tape in slow motion. 27. STOP C button (DVD/VCR) • Press to stop playback or recording. • Press to exit from the title list. 28. DVD button • Press to select the DVD output mode. 29. AUDIO button (DVD/VCR) DVD mode: • During playback, press to display the audio menu. VCR mode: • During playback a HiFi video tape, press to change the audio out setting HiFi and mono. 30. D.DUBBING button (DVD/VCR) Press to start VCR to DVD (DVD to VCR) duplication which you set in the main menu. 31. RAPID PLAY button (DVD) During playback, press to playback in a slightly faster/slower mode with keeping the audio quality. Connections VCR Functions Others 1. DISPLAY button (DVD/VCR) Press to display the display menu on or off. 2. TIMER SET button (DVD/VCR) Press to set the unit in the timer standby mode. In the timer standby mode, press to cancel the mode and to turn the unit on. 3. SOURCE button (DVD/VCR) Press to select the appropriate input. 4. Number/Character buttons (DVD/VCR) • Press to select a title/chapter/track/file on display. • Press to enter values for the settings in the main menu. • Press to enter title names. • Press to start the index/time search in VCR mode. 5. TIMER button (DVD/VCR) Press to display the timer programming list. 6. DISC MENU button (DVD) Press to display the disc menu. 7. OK button (DVD/VCR) Press to confirm or select menu items. 8. TITLE button (DVD) Press to display the title list. 9. PREV H button (DVD) • During playback, press to return to the beginning of the current chapter, track or file. • When playback is paused, press to play back reverse step by step. 10. REW E button (DVD/VCR) DVD mode: • During playback, press to fast reverse. • When playback is paused, press to play back slow reverse. VCR mode: • During playback, press to rewind the cassette tape or to view the picture rapidly in reverse. 11. PAUSE F button (DVD/VCR) Press to pause playback or recording. 12. TRACKING / buttons (VCR) • Press to adjust the tracking during playback or in slow motion of the cassette tape. • While playback is in still mode, you can adjust the picture blurred vertically. 13. VCR button • Press to select the VCR output mode. 14. REC MODE button (DVD/VCR) Press to switch the recording mode. 15. REC I button (DVD/VCR) • Press once to start a recording. • Press repeatedly to start the one-touch timer recording. 16. CM SKIP button (DVD) During playback, press to skip 30 seconds. 17. SEARCH button (VCR) Press to call up the index or time search menu. 18. STANDBY-ON y button (DVD/VCR) Press to turn the unit on and off. 19. OPEN/CLOSE A button (DVD/VCR) DVD mode: Press to open or close the disc tray. VCR mode: Press to remove the cassette tape from the cassette compartment. Introduction FUNCTIONAL OVERVIEW Note EN 11 Español • If you turn off this unit, [OPEN/CLOSE A] on the remote control is not available. Be sure to use [OPEN/CLOSE A] or [STOP C / EJECT A] on the unit. FUNCTIONAL OVERVIEW Front Panel Display 2 1 PM BS CS DR CD VCR DB HDD DVD 3 4 1. PM 3. Current status of the unit : Appears in the afternoon with the clock display. : Appears when playback is paused. DVD : Appears when this unit is in DVD output mode. : Appears when the timer recording is proceeding in DVD. : Appears when DVD is in the timer recording standby mode. : Flashes when a program cannot be performed for some reasons. DB : Appears during VCR to DVD duplication process. : Appears during DVD to VCR duplication process. : Appears when playing back a disc. 2. Title / track / file and chapter mark : Appears when indicating a title / track / file number. : Appears when the timer programming or OTR has been set and is proceeding. : Flashes when all timer recordings have been finished. : Appears when indicating a chapter number. : Appears during recording process. : Flashes when a recording pauses. : Appears when this unit is in DVD output mode and a disc is in the unit. : Appears during duplication process. : Appears when this unit is in VCR output mode and a cassette tape is in the unit. : Appears during duplication process. VCR 4. Displays the following • Elapsed playback time • Current title / chapter / track /file number • Recording time / remaining time • Clock • Selected external input position • Remaining time for one-touch timer recording : Appears when this unit is in VCR output mode. : Appears when the timer recording is proceeding in VCR. : Appears when VCR is in the timer recording standby mode. : Flashes when a program cannot be performed for some reasons. Display Message Appears when the disc tray is opening. Appears when data is being written on a disc. Appears when the disc tray is closing. Appears when the PBC function is activated. (Video CD playback only. Refer to page 41.) Appears when a disc is loaded on the disc tray. 12 EN Introduction CONNECTION TO AN EXTERNAL TUNER Connections Basic Setup Recording OUT IN Playback Editing Supplied cables used in this connection are as follows: • RCA audio cable (L/R) x 1 • RCA video cable x 1 Please purchase the rest of the necessary cables at your local store. Function Setup VCR Functions rear of your TV connect Others rear of this unit Note to CATV system installer EN 13 Español • This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper grounding - in particular, specifying that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as possible. SETTINGS FOR THE VIDEO INPUT You must let the unit know which video input jack you are using before making a recording. STANDBY-ON SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR 0 SETUP DISC MENU o OK s B TITLE RETURN 1 2 3 4 B F h i g “General Setting” menu will appear. Use [K / L] to select “Video”, then press [OK]. Submenu will appear. Use [K / L] to select “Video Input”, then press [OK]. Use [K / L] to select desired external input position, then press [OK]. General Setting Playback Display Video Recording Clock Reset All p j Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. Progressive Scan TV Aspect Video Input Video Input E1 (Rear) E2 (Front) C TRACKING -- + VCR REC DVD REC MODE D.DUBBING AUDIO I 5 CM SKIP SEARCH RAPID PLAY Use [K / L] to select the input jack type to connect, then press [OK]. If you want to use VIDEO IN jack, select “Video In”. If you want to use S-VIDEO IN jack, select “S-Video In”. General Setting Playback Display Video Recording Clock Reset All Progressive Scan TV Aspect Video Input E1Video (Rear)Input In E1Video (Rear) E2S-Video (Front)In NB552 6 14 EN Press [SETUP] to exit. Introduction CONNECTION TO A TV Connections Basic Setup Recording S-VIDEO IN Playback Editing DIGITAL AUDIO OUT DVD AUDIO S-VIDEO COMPONENT VIDEO OUT OUT Y L OUT PB /CB COAXIAL PR /CR Function Setup R VCR Functions Others Español EN 15 CONNECTION TO AN AUDIO SYSTEM Digital Audio Connection 2 Channel Analog Audio Connection stereo system Dolby Digital decoder, MD deck or DAT deck audio R L AUDIO IN analog audio input jacks RCA audio cable DIGITAL AUDIO OUT DVD AUDIO S-VIDEO COMPONENT VIDEO OUT OUT S-VIDEO Y L OUT PB /CB DIGITAL AUDIO OUT DVD AUDIO S-VIDEO COMPONENT VIDEO OUT OUT S-VIDEO Y L AUDIO OUT S-VIDEO COMPONENT VIDEO OUT Y OUT PB /CB IN DVD/VCR IN --- AUDIO --- OUT L L R R IN R L IN ---VIDEO --- OUT R R DIGITAL AUDIO OUT L COAXIAL COAXIAL DVD/VCR IN --- AUDIO --- OUT PR /CR OUT PB /CB IN ---VIDEO --- OUT PR /CR DIGITAL AUDIO OUT DVD AUDIO S-VIDEO COMPONENT VIDEO OUT OUT S-VIDEO Y L OUT PB /CB COAXIAL COAXIAL IN DVD/VCR IN --- AUDIO --- OUT L L R R IN ---VIDEO --- OUT R PR /CR PR /CR R AUDIO OUT Supplied cables used in this connection are as follows: • RCA audio cable (L/R) x 1 Please purchase the rest of the necessary cables at your local store. Connection Setting Setup >General Setting >Playback >Disc Audio > Dolby Digital If output is Dolby Digital encoded audio, connect to a Dolby Digital decoder. Stream Connecting to an MD deck or DAT deck. PCM If not connected to any external devices. PCM * To complete these settings, refer to page 73. Note • The DVD AUDIO OUT and DIGITAL AUDIO OUT jacks are only useful in DVD mode. • The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound by an MD or DAT deck. • By connecting this unit to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi channel surround sound as heard in the movie theaters. • Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers. 16 EN Because this product is a combination of a VCR and a DVD recorder, you must select first which component you wish to operate with [SOURCE]. VCR mode Press [VCR] on the remote control. (Verify that the VCR indicator is lit.) Connections DVD mode Press [DVD] on the remote control. (Verify that the DVD indicator is lit.) STANDBY-ON SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 5 6 TUV WXYZ 7 8 9 TIMER SPACE CLEAR Basic Setup 4 PQRS 0 DISC MENU SETUP o OK s B TITLE RETURN p DVD indicator B j F h i g C TRACKING -- + VCR VCR indicator REC DVD VCR button Recording SOURCE button Introduction THE VCR / DVD RECORDER SWITCHING DVD button REC MODE D.DUBBING AUDIO I CM SKIP SEARCH RAPID PLAY Playback NB552 Note • You cannot switch to another mode (DVD or VCR) during in the timer-standby mode. Editing Function Setup VCR Functions Others Español EN 17 GUIDE TO ON-SCREEN DISPLAYS AND MENUS This unit uses the following on-screen displays and menus to guide you to the easy operations. The on-screen displays give you the information on the loaded disc, the disc/file in playback, etc. The menus allow you to change the various kinds of settings for playing back, recording, or editing to suite your preference. On-Screen Display / Menu The on-screen display changes in the following order as you press [DISPLAY]. VCR mode 1 12:00AM OFF 2 Disc Information/Menu Title Name Information (only when DVD+RW/DVD+R/DVD-RW/DVD-R is in playback) or File Name Information (only when a CD with MP3 files is in playback) Disc Information / Menu 6 DVD mode 1/ 5 1. 2. 3. 4. 5. SP 0:00:00 HIFI 3 4 5 Indicates current video status. Indicates the current time. Indicates a recording or playing back mode. Indicates a tape counter. Audio status of the current cassette tape. Note 1/ 5 • This is an example screen only for explanation. Displayed items are depending on the disc you inserted. 0:01:00 / 1:23:45 DVD Video E1 (Rear) 5 1 2 Title/File Name Information SP(2Hr) 1:53 Title Name Information Title Name 4 3 * This is an example screen only for explanation. 1. Indicates a disc type and format mode. 2. Indicates the selected external input position. 3. Indicates a recording mode and possible recording time left. 4. Indicates an operation status. 5. Each icon means: : Search : Marker : Audio : Noise Reduction : Subtitle : Zoom : Angle : Surround : Repeat 6. Indicates the current title number/total number of titles, the current chapter number/total number of chapters, and time lapse of the current title playback/ total duration of the title. 18 EN My Title 1 File Name Information File Name My File 1 1. Displays title/file name. Main Menu Setup General Setting Timer Programming Title List Disc Edit CD Playback Mode Basic Setup 1 2 3 4 5 1. General Setting: To go to general setting menu. 2. Timer Programming: To program a timer recording. 3. Title List: To call up the title list. 4. Disc Edit: To set up the DVD disc setting. 5. CD Playback Mode: To set up the CD playback setting. • “CD Playback Mode” is available only when an audio CD, a video CD, a CD-RW/-R with MP3 files is inserted into the unit. Connections Press [SETUP] to display the main menu. Then use [K / L] to select a menu and press [OK] to display the menu. These menus provide entries to all main functions of the unit. Introduction GUIDE TO ON-SCREEN DISPLAYS AND MENUS General Setting Menu 1. Playback: To set up the unit to play back discs as you prefer. 2. Display: To set up the OSD screen as you prefer. 3. Video: To set up the video setting. 4. Recording: To set up the unit to record to discs as you prefer. 5. Clock: To set up the clock of the unit as you need. 6. Reset All: To reset the setting to the factory default. General Setting Playback Display Video Recording Clock Reset All Recording 1 2 3 4 5 6 2 PlaybackDisc Edit Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON Disc Edit Edit Disc Name Erase Disc Finalize Disc Protect OFF ON Disc Edit 1 3 2 4 3 Edit Disc Name Finalize Disc Protect OFF ON CD Playback Mode 5 1 6 2 7 3 Random Play Program Play PBC (Video CD only) Others VCR Functions 1 2 3 4 Function Setup 1 2 3 4 1. Edit Disc Name: Allows you to rename the disc. 2. Erase Disc: (DVD+RW/DVD-RW only) Allows you to erase all contents in the disc and format it. 3. Make Edits Compatible: (DVD+RW only) Allows you to memorize the editing status on the disc if you have added or deleted chapters, or made chapters hidden on this unit, and to effect it when playing back on the other unit. Finalize: (DVD+R/DVD-RW/-R only) Allows you to finalize a disc containing recorded titles. 4. Disc Protect : Allows you to protect a disc from accidental editing or recording. 5. Random Play: Allows you to activate the random playback feature. 6. Program Play: (audio CD/video CD only) Allows you to activate the program playback feature. 7. PBC (Video CD only): Allows you to select images or information on the menu screen by activating PBC (playback control) function. Editing Disc Edit / CD Playback Mode Español EN 19 INITIAL SETTING You need to follow these steps when you turn on this unit for the first time. STANDBY-ON SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR 1 2 Press [STANDBY-ON y]. Turn the TV on. Select the input to which the unit is connected. Use [K / L] to select your desired language, then press [OK] to set language. Initial Setup OSD Language 0 DISC MENU English Français Español SETUP o OK s B TITLE RETURN p B j F h i g C 3 REC --- / -- / ---- (---) -- : -- -- + VCR Initial Setup Clock Setting TRACKING -- Press [OK] to activate “Clock Setting”. DVD REC MODE D.DUBBING AUDIO I CM SKIP SEARCH RAPID PLAY 4 NB552 20 EN Proceed to step 4 in “Clock Setting” on page 21. Introduction SETTING THE CLOCK Set the clock before you try the timer programming. Clock Setting SOURCE TIMER SET DISPLAY OPEN/CLOSE A ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR 0 o OK s B TITLE Use [K / L] to select “Clock”, then press [OK]. Use [K / L] to select calendar or time, then press [OK]. General Setting Recording SETUP DISC MENU “General Setting” menu will appear. Basic Setup .@/: 1 2 3 Connections STANDBY-ON Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. Playback Display Video Clock Setting Recording JAN / 01 / 2007 ( MON ) Clock 12 : 00 AM Reset All RETURN p B j h g C TRACKING -- + VCR REC DVD 4 REC MODE D.DUBBING AUDIO Editing I Use [{ / B] to select an item to set, and use [K / L] to select the contents to suit your preference, then press [OK]. General Setting CM SKIP SEARCH RAPID PLAY Playback Display Video Clock Setting Recording JAN / 01 / 2007 ( MON ) Clock 12 : 00 AM Reset All Function Setup Your setting will be activated. The clock start counting when you press [OK]. NB552 Press [SETUP] to exit. VCR Functions 5 Playback F i Others Note Español • Your clock setting will be lost if either there is a power failure or this unit has been unplugged for more than 30 seconds. • For setting the day, year, hour, and minute, [the Number buttons] can also be used. • You can set the built-in calendar from the year 2007 up to 2056. EN 21 INFORMATION ON DVD RECORDING Before you make a recording, read the following information. Recordable Discs Recording Mode This unit can record to DVD+RW, DVD+R, DVD-RW and DVD-R. DVD+R/DVD-R can only be recorded to once. DVD+RW/ DVD-RW can be recorded to and erased many times. DVD-RW/-R will be recorded in the DVD+VR mode automatically in this unit. Logo You can select a recording mode among 6 options, and the recording time will depend on the recording mode you select as follows. Disc size Attributes 8cm Disc DVD+RW DVD-RW DVD+R 8cm/12cm, single-sided, single layer disc Approx. max. recording time (SLP mode): 360 minutes (4.7GB) (for 12cm) 108 minutes (1.4GB) (for 8cm) Unrecordable Discs • DVD-RW recorded in the mode other than +VR is not recordable on this unit unless you erase all contents in the disc (refer to page 67). • DVD-R recorded in the mode other than +VR is not recordable on this unit. EN Recording time HQ (1Hr) 18 min SP (2Hr) 36 min SPP (2.5Hr) 45 min LP (3Hr) 54 min Video/sound quality (good) EP (4Hr) 72 min SLP (6Hr) 108 min (poor) HQ (1Hr) 60 min (good) SP (2Hr) 120 min SPP (2.5Hr) 150 min LP (3Hr) 180 min EP (4Hr) 240 min SLP (6Hr) 360 min (poor) DVD-R • Following discs are recommended for good recording quality and are proven to be compatible with this unit. However, depending on the media condition the unit may not read the disc properly. Verbatim DVD+R 8x, DVD+RW 4x, DVD-R 8x, DVD-RW 2x JVC DVD-RW 4x Maxell DVD+R 4x/8x/16x, DVD-R 8x/16x SONY DVD+R 4x/8x/16x, DVD+RW 4x TDK DVD+R 4x/8x/16x Performance of any other discs are not guaranteed. • You can play back DVD+RW on most DVD players without finalizing. However, if you have added or deleted chapters, or made chapters hidden, you must perform “Make Edits Compatible” before being able to see those effects on other units. (Refer to page 68 for more details.) To play back discs other than DVD+RW on other DVD players, you will need to finalize. 22 12cm Disc Recording mode • The recording time is only an estimate. The actual recording time may differ. • The audio and video quality gets poorer as the recording time becomes longer. • Each time [REC MODE] is pressed, recording mode and its allowed recording time will be displayed. Note • This unit cannot record to CD-RW or CD-R. • DVD+RW/+R, DVD-RW/-R and CD-RW/-R recorded on a personal computer or a DVD or CD recorder may not be played back if the disc is damaged or dirty or if there is condensation on the player’s lens. • If you record a disc using a personal computer, even if it is recorded in a compatible format it may not be played back because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.) • Since the recording is made by the VBR (variable bit rate) method, depending on the picture you are recording, the actual remaining time for recording may be a little shorter than the remaining time displayed on the TV screen. • You cannot record copy-protected program using this unit. (Copy-protected signal is included in DVDvideo or some satellite broadcasts.) • You cannot record “copy-once only” program on DVD. Make Recording Compatible Introduction BEFORE RECORDING Setting for Auto Chapter You can set a specified time for chapter marks. 1) Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. “General Setting” menu will appear. 2) Use [K / L] to select “Recording”, then press [OK]. “Recording” menu will appear. 3) Use [K / L] to select “Auto Chapter”, then press [OK]. 2) Use [K / L] to select “Recording”, then press [OK]. “Recording” menu will appear. 4) Use [K / L] to select a desired time option, then press [OK]. Basic Setup 1) Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. “General Setting” menu will appear. Connections Use this feature to make the unfinalized +VR mode discs recorded on other unit recordable on this unit. When you make an additional recording on this unit with “Make Recording Compatible” set to “ON”, the title menu is automatically converted to our style. General Setting Playback Display Video Recording Clock Reset All 4) Use [K / L] to select “ON” or “OFF”, then press [OK]. General Setting Auto Chapter AutoCompatible Finalize Make Recording Dubbing Mode ON Make Recording Compatible OFF Auto Chapter Auto Finalize Auto Chapter Dubbing Mode OFF Make Recording Compatible 5 minutes 10 minutes 15 minutes 30 minutes 60 minutes Playback Playback Display Video Recording Clock Reset All Recording 3) Use [K / L] to select “Make Recording Compatible”, then press [OK]. 5) Press [SETUP] to exit. Note ON: • The interval for auto chapter marks may slightly differ. • A blank chapter may be created depending on the remaining time of the disc. Editing OFF: Title list will be replaced when you make additional recordings to the discs recorded by other units. Prohibiting additional record to the disc that has a title list created by other units. Function Setup 5) Press [SETUP] to exit. VCR Functions Others Español EN 23 BASIC RECORDING & ONE-TOUCH TIMER RECORDING Follow the steps to record TV programs from an external tuner. This unit has no tuner system so cannot receive TV broadcasts without external tuner or such devices. STANDBY-ON SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC 1 2 1 2 3 JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR DISC MENU * Make sure the disc is compatible with this unit. (Refer to page 22 for the list of compatible discs.) SETUP o OK B TITLE RETURN p B F h i 3 TRACKING -- REC Press [OPEN/CLOSE A] to close the disc tray. It may take a while to load the disc completely. • When inserting a brand-new DVD+RW/DVDRW, the unit automatically starts to format. • If titles have been recorded on the disc, the title list is displayed. Press [STOP C] to exit the title list. C g + VCR Press [OPEN/CLOSE A] to open the disc tray and insert your disc with its label facing up. Align the disc to the disc tray guide. 0 j Press [DVD]. DEF GHI s Press [STANDBY-ON y]. Turn on the TV and be sure to select the input to which the unit is connected. DVD REC MODE D.DUBBING AUDIO I CM SKIP SEARCH RAPID PLAY 4 Press [REC MODE] to select a recording mode. Refer to “Recording Mode” on page 22 for DVD. NB552 SP(2Hr) 5 24 EN 0:58 Press [SOURCE] to select the appropriate external input position (E1/E2) to which your external tuner is connected. Then select the desired channel to record on the external tuner. 6 Press [REC I] to start recording. “I” will be displayed for 5 seconds. 7 Introduction BASIC RECORDING & ONE-TOUCH TIMER RECORDING Press [STOP C] to stop recording. The recorded title will appear in the title list. (Refer to “Guide to a Title List” on page 56.) e.g.) DVD+R Connections I Writing to Disc Basic Setup Press [PAUSE F] to pause recording. Press [PAUSE F]] or [REC I] again to restart recording. 90% To set one-touch timer recording (OTR)... I 1 SP(2Hr) NOV/21/07 11:00AM E1 SP NOV/21/07 0:20:44 2 Recording This is a simple way to set the recording time in blocks of 30 minutes. Press [REC I] repeatedly until the desired recording time (30 minutes to 6 hours) appears on the TV screen. One-touch timer recording will start. EMPTY TITLE 1:41:17 SP(2Hr) 0:30 • Press [STOP C] to exit the title list. 0:30 6:00 Playback (normal recording) 1:00 5:30 Editing • To cancel one-touch timer recording within the specified time, press [STOP C]. Function Setup Note When you press [REC I], recording starts immediately and continues until the disc is full or you stop recording. This unit cannot record images as aspect ratio of 16:9. The 16:9 images will be recorded as 4:3. When the unit clock has not been set, the space for a date and time of title names will be blank. You cannot change the recording mode during the recording pause mode. You can change a channel to be recorded during the recording pause mode. VCR Functions • • • • • Note for one-touch timer recording Español EN Others • Press [DISPLAY] to see the remaining recording time on the TV screen. • Unlike the timer recording, you can perform the following operations during one-touch timer recording. - Turning off the power to stop one-touch timer recording. - Using [REC I] or [STOP C] on the remote control. • You cannot use the pause function during one-touch timer recording. • If DVD one-touch timer recording is completed during VCR playback or recording, the DVD will be in stop mode and the VCR keeps the current mode. • When one-touch timer recording is finished and the power is turned off, the unit will switch to the timer-standby mode automatically if a timer recording has been programmed. Press [TIMER SET] to cancel the timer-standby mode to use the unit continuously. 25 TIMER RECORDING You can program the unit to record up to 12 programs within a month in advance. Daily or weekly program recordings are also available. Before recording, make sure • Connect the external tuner to either E1 or E2 and set it to output audio/video signals when it comes to the time you want to start recording. • Do not change the external tuner’s channel while you are recording. You cannot watch one channel and record another at the same time. • Set the clock before setting a timer programming. • Insert a recordable disc with enough recordable space or a cassette tape with a erase-protection tab. Guide to Timer Programming Display 3 1 2 Timer Programming JAN/ 2/07 12:00 AM E1 SP SP (1:00) MON JAN/01 11:00AM Date JAN/02 Start End 12:00AM 1:00AM New Program E1/E2 E1 1/1 4 5 1 Title of a timer program (Contains date, time, selected external input position, recording mode of the program) 2 Current date and time 3 Recording mode, and length of the recording 4 Timer program list 5 Total number of pages and current page (2 pages maximum) 1 2 Press [TIMER]. Use [K / L] to select “New Program”, then press [OK]. Timer Programming MON JAN/01 11:00AM Date Start End New Program E1/E2 1/1 3 Use [K / L] to enter the date, then press [B]. Timer Programming MON JAN/01 11:00AM Date Date JAN/02 E1/E2 E1 Start End New Start Program --:-REC To DVD E1/E2 End --:-Mode SP SP 2 : 00 1/1 JAN/01 MON-FRI When pressing [L] at the current date, the date will change as follows. SAT e.g.) January 1st p Daily p MON-SAT p p p p p FRI SUN p JAN/31 26 EN 4 Use [K / L] or [the Number buttons] to enter the start and end time, then press [B]. Timer Programming Auto recording mode select... Start End New Start Program 12 : 00AM REC To DVD SP 1 : 00 1/1 6 Use [K / L] to select a recording media (“DVD” or “VCR”), then press [B]. Start End New Start Program 12 : 00AM REC To DVD BS CS DR CD HDD DVD E1/E2 End 1 : 00AM Mode SP SP will appear on the front panel display. Editing Date Date JAN/02 E1/E2 E1 9 Press [TIMER SET] to set a timer programming. Playback E1/E2 End 1 : 00AM Mode SP Press [OK] when all items are entered. Your program setting is now stored. • To set another program, repeat steps 2 to 7. • To exit, press [TIMER] or [SETUP]. • When 2 or more programs are overlapped, “Timer program overlapped” appears, and the overlapped program will be displayed in blue. • To correct the timer program refer to “Checking, canceling, or correcting the timer programming information” on page 28. Recording 8 MON JAN/01 11:00AM SP 0 : 00 • “Auto” is only available for one program in the timer program list. • The recording may be cut short when the available recording space of the disc is too limited. Timer Programming Start End New Start Program 12 : 00AM REC To DVD End 1 : 00AM Mode Auto Basic Setup Use [K / L] to select the appropriate external input position (E1/E2) to which your external tuner is connected, then press [B]. Date Date JAN/02 E1/E2 E1 Start 12 : 00AM REC To DVD Auto 2 : 00 1/1 5 Date JAN/02 E1/E2 E1 E1/E2 End --:-Mode SP Connections When “Auto” is selected as a recording mode, the unit calculates how much time is available on the disc and determines the appropriate recording mode to complete recording the program. MON JAN/01 11:00AM Date Date JAN/02 E1/E2 E1 Introduction TIMER RECORDING "VCR” will appear if VCR timer recording have been set. 1 : 00 Note 1/1 Start End New Start Program 12 : 00AM REC To DVD E1/E2 End 1 : 00AM Mode SP SP 1 : 00 1/1 Refer to “Recording Mode” on page 22 for DVD or “Recording” on page 79 for VCR. • You can check the remaining recordable space of the disc when you select the recording mode. Start 12 : 00AM REC To DVD End 1 : 00AM Mode SP SP 1 : 00 27 Español EN Others Date JAN/02 E1/E2 E1 VCR Functions Date Date JAN/02 E1/E2 E1 Function Setup 7 Use [K / L] to select a recording mode. • If you have not set the clock yet: “Clock Setting” menu will appear instead of the timer programming list at step 1. Continue with the step 4 in “Clock Setting” on page 21 before setting a timer programming. • Use [s / B] to move the cursor to the left and the right in “Timer Programming” menu. • If a basic recording or one-touch timer recording is in progress on one component (e.g., VCR) and the timer recording set for the other component (e.g., DVD) is about to begin, the unit automatically switches to the programmed channel for timer recording 2 minutes before the programmed starting time, and the recording in progress (for VCR) will be canceled UNLESS their recording channels are the same. If their recording channels are the same, the timer recording will start without canceling the recording currently in progress. In this case, the recording of the same channel will be made on both DVD and VCR. • Cancel the timer-standby mode by pressing [TIMER SET] before operation for either DVD or VCR. When finished operating, press [TIMER SET] to resume the timer-standby mode. • In the timer-standby mode, you can turn on the power and use the component (VCR or DVD) which is not currently timer-programmed. TIMER RECORDING Checking, canceling, or correcting the timer programming information 1) Press [TIMER SET]. will disappear on the front panel display. If the timer program did not complete correctly, the error number appears in the timer programming list. Timer Programming 2) Press [TIMER]. TUE JAN/02 11:00AM 3) Check the information on the list you will need. E41 Date JAN/02 Timer Programming Start End 12:00AM 1:00AM New Program E1/E2 E1 JAN/ 2/07 12:00 AM E1 SP SP (1:00) MON JAN/01 11:00AM Date JAN/02 Start End 12:00AM 1:00AM New Program E1/E2 E1 1/1 Each error number means: 1/1 4-A) To delete the timer program: 1 Use [K / L] to select the program you want to delete, then press [OK]. 2 Use [K / L] to select “Delete”, then press [OK]. Confirmation window will appear. 3 Use [K / L] to select “Yes”, then press [OK]. 4-B) To correct the timer program: 1 Use [K / L] to select the program you want to correct, then press [OK]. 2 Use [K / L] to select “Program Change”, then press [OK]. 3 Correct the timer program by using [K / L / { / B], then press [OK]. 5) Press [TIMER] to exit. 6) Press [TIMER SET] to return to the timer standby mode. To stop the timer recording in process Press [STOP C] to stop the disc recording or [STOP C/EJECT A] to stop the cassette tape recording on the front panel of the unit. [STOP C] on the remote control is not effective. Note • Press [TIMER] to check the timer recording in progress. When the timer recording is proceeding, that program will be highlighted with red. In this case, you cannot select any other program. 28 EN E1-22 Recording error other E41 E37-39 than below Power failed E24 E42 No disc when recording E25-26 Copy prohibited program E43 Already 49 titles recorded E29 Disc protected E44 Already 254 chapters recorded E30 Disc full E45 Copy prohibited program E35 PCA full *1 E46 E36 Already finalized video format disc E40 Some portion has not been recorded because of program overlapping. Recording did not start at the start time. It is impossible to record additionally on a disc recorded by other units when setting “ Make Recording Compatible” to “OFF”. Unrecordable disc • E23, E27, E28, E31, E32, E33 and E34 are not displayed. • A program with the error number is grayed in the timer programming list. • Once the timer programming list with error line(s) is displayed, or after canceling and setting again the timer standby mode, the program line(s) with error will be cleared. *1 PCA is a disc's space reserved for recording test. Hints for Timer Recording Editing When the starting time is the same: A program set previously (PROG. A) has priority. Playback • Timer program which has the earlier start time will be placed first in the timer program list, and be given priority over the programs with the later start time when timer programs overlap. • When timer programs overlap, the first 2 minutes (at the longest) of the later recording will be cut off. • When two or more timer programs have the same start time, the program set first will be given priority. • A timer recording of lower priority will be canceled or start from the middle. • Check the overlapped timer programmings and change the priority if necessary. Recording The Priority of Overlapped Settings Basic Setup timer recording. If you want to use functions other than recording under such condition, cancel timer recording by pressing [TIMER SET] during timer standby or stop recording by pressing [STOP C] on the front panel during timer recording. • To cancel the timer standby mode, press [TIMER SET]. • When the starting and the ending time are the same, the length of the recording will be set for 24 hours. When the disc or cassette tape becomes full during the recording, the unit turns itself off. • When the programmed starting and ending time are earlier than the current time, the setting will not be accepted and be cleared for redoing. • If the starting time is earlier and the ending time is later than the current time, the recording will start right after you turn the power off. • The timer recording for digital TV cannot record any audio language other than English. • The timer recording cannot be performed in DVD and VCR at the same time. If you set 2 programming with the same channel and time in both devices, the program with a lower program number will be recorded. Connections • If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer programming will be lost. • If a disc is not inserted, "DVD" on the front panel display flashes and timer recording cannot be performed. In some cases, will appear momentarily around the start point as the unit attempts to record. Please insert a recordable disc. • If a cassette tape with a erase-protection tab is not in the cassette compartment or there is no cassette tape in the cassette compartment, “VCR” on the front panel display flashes and timer recording cannot be performed. Please insert a recordable cassette tape. • If you press [TIMER SET] and turn on the unit while either DVD or VCR is in timer standby mode, disappears. In this case, you cannot change the mode between DVD and VCR. You cannot change any settings using [SETUP] or edit discs. flashes. To • When all the timer recording is completed, play back or eject the recorded disc, press [TIMER SET] first, then select the recorded title and press [PLAY B], or [OPEN/CLOSE A] to remove the disc. • If both DVD and VCR are timer programmed, you cannot use any functions for either unit during timer standby or Introduction TIMER RECORDING PROG. A Function Setup PROG. B actual PROG. PROG.AA PROG. B recording The first 2 minutes (at the longest) will be cut off. VCR Functions Note for DVD recording • When the recording time of 2 programs are overlapped, or the end time of a program and the start time of another program is the same, the first 2 minutes (at the longest) of the subsequent program will be cut off. • If the cut-off portion comes up to 3 minute or more, this program will be displayed with error number E40 in the timer programming list. When the end time of the programming currently being recorded and the start time of the subsequent program are same: The beginning of the PROG. B may be cut off. PROG. A PROG. B PROG. A Others actual recording PROG. B The first 2 minutes (at the longest) will be cut off. Español EN 29 SATELLITE LINK You can set the unit to start recording whenever it detects the video signal from the external tuner. Preparing for the satellite link timer recording: Preparation on the tuner • Satellite link accepts only the connection from E1 (rear) with the external tuner. (The connection from E2 cannot read any signals from the external tuner.) • The external tuner should be equipped with some kind of timer function. Using timer function of the tuner, set it to output audio/video signals when it comes to the time you want to start recording, and stop output audio/ video signals when it comes to the time you want to finish recording. Refer to the tuner’s manual on how to set the timer. • Make sure to set the satellite link standby mode when you finish setting. 1 2 3 Press [SETUP]. 4 Use [K / L] to select the time, media and recording mode, then press [OK]. Use [K / L] to select “Timer Programming”, then press [OK]. Use [K / L] to select “Satellite Link”, then press [OK]. Timer Programming Timer Programming Satellite Link STANDBY-ON TIMER SET .@/: ABC DEF GHI JKL MNO TUV WXYZ SPACE CLEAR TIMER DISC MENU TRACKING 6 7 EN DVD VCR Mode DVD SP (2Hr) RETURN 5 30 Start 5:00PM To Standby Mode SETUP TITLE Satellite Link Use [K / L] to set the desired starting time, then press [B]. • The hour can be selected from 1 to 12 with AM or PM. • Repeat procedures in step 5 to set the desired minutes. • If you wish to go back to the left, press [{]. Use [K / L] to select a recording media (“DVD” or “VCR”), then press [B]. Use [K / L] to select the recording mode. Refer to page 22 for details. Press [OK]. “To Standby Mode” is highlighted. Connections 8 9 Introduction SATELLITE LINK Press [OK] again. Satellite Link Start DVD VCR Mode 5:00PM DVD SP (2Hr) To Standby Mode Basic Setup Recording In a second, the unit will be turned off automatically as it goes into the satellite link standby mode. To cancel the satellite link function while in the satellite link standby mode: Press [TIMER SET] to turn on the unit. To cancel the satellite link function while the satellite link recording is in progress: Press [STOP C] on the front panel of the unit. Playback Editing Function Setup Notes example 3 timer recording timer recording satellite link satellite link satellite link actual recording actual recording actual recording The first 2 minutes (at the longest) will be cut off. EN 31 Español timer recording The first 2 minutes (at the longest) will be cut off. Others example 2 example 1 VCR Functions • If the signal of external input breaks up over 5 seconds, satellite link function will be canceled. • If you have not set the clock, “Clock Setting” menu will appear at step 3. Follow to step 3 in “Clock Setting” on page 21. • You cannot set the end time for the satellite link timer recording on this unit. • Recording picture will be distorted if the copy protection signal is being detected during satellite link timer recording. • You can record the satellite link by using S-video input jacks on the rear panel. Refer to page 13 for more information. • When a regular timer recording and the satellite link timer recording are overlapped, those recordings are recorded as illustrated below. • Press [TIMER] during the satellite link timer recording to check the satellite link timer recording in progress. OVERWRITING UNNECESSARY TITLE You can overwrite the existing title from the beginning. 1) Press [STANDBY-ON y]. Make sure that the TV input is set on the unit. 2) Load the disc that includes a title to be overwritten. It takes a while to display the title list. Title list will appear. If the title list does not appear, press [TITLE]. 3) Press [REC MODE] to select a recording mode. Refer to “Recording Mode” on page 22. 4) Use [K / L] to select a title to be overwritten, then press [OK]. 1 SP (2Hr) NOV/21/07 11:00AM E1 SP NOV/21/07 0:20:44 2 NOV/22/07 11:35AM E1 EP NOV/22/07 0:10:33 3 5) Use [K / L] to select “Overwrite”, then press [OK]. Play Edit Overwrite 1 SP (2Hr) NOV/21/07 11:00AM E1 SP NOV/21/07 0:20:44 2 6) Press [SOURCE] to select the appropriate external input position (E1/E2) to which your external tuner is connected. Then select the desired channel to record on the external tuner. e.g.) DVD+RW 1 1 0:01:00 +RW E1 (Rear) FI 32 EN SP(2Hr) 2:00 When you overwrite on the unnecessary title, there were various circumstances such as follows. Please note that following cases only describe the overwriting without any recording mode discrepancy. To avoid accidental deletion please check if there is no important title after the overwriting point. Connections When overwriting title is shorter than the existing title: (overwriting from the beginning of the title) overwrite recording : A Introduction OVERWRITING UNNECESSARY TITLE Basic Setup after overwriting existing title : B Recording Playback Editing Function Setup VCR Functions Others Español EN 33 DIGITAL AUDIO OUT DVD AUDIO S-VIDEO COMPONENT VIDEO OUT OUT S-VIDEO Y IN COAXIAL EN L L R R IN ---VIDEO --- OUT R 34 DVD/VCR IN --- AUDIO --- OUT Introduction EXTERNAL DEVICE RECORDING Recording from an External Device Before recording from an external device, refer to the instructions for the connection on page 34. SOURCE TIMER SET DISPLAY OPEN/CLOSE A ABC 1 2 DEF 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR It takes a while to load the disc. 0 SETUP o OK s B TITLE RETURN p B j F h i g C TRACKING -- + VCR REC DVD I CM SKIP SEARCH RAPID PLAY 1 7 5 Press [RECORD I] (DVD or VCR) on the unit to start recording. Start playback on the external device to record from. For disc: Press [STOP C] on the unit to stop recording. For cassette tape: Press [STOP C/EJECT A] on the unit to stop recording. Others 75 Refer to “Recording Mode” on page 22 for DVD or “Recording” on page 79 for VCR. VCR Functions 2 • To use the input jacks on the rear of this unit; Select “E1 (Rear)” position by using [SOURCE]. • To use the input jacks on the front of this unit; Select “E2 (Front)” position by using [SOURCE]. Function Setup 4 5 6 7 Press [REC MODE] to select a recording mode. REC MODE D.DUBBING AUDIO Editing 3 Select the input of the unit which the external device is connected. (E2 or E1) Playback When you want to record to a cassette tape: Press [VCR]. Insert the cassette tape with a eraseprotection tab into the cassette compartment. Recording DISC MENU When you want to record to the disc: Press [DVD]. Press [OPEN/CLOSE A] to open the disc tray. Place the disc to record properly. Press [OPEN/CLOSE A] again to close the disc tray. Basic Setup .@/: 1 2 Connections STANDBY-ON Turn on the TV and press [STANDBY-ON y], and be sure to select the input of the TV to which the unit is connected. This operation may take a while to be completed. Español EN 35 SETTING A DISC TO PROTECT To prevent accidental recording, editing or erasing the titles, you can protect them from “Disc Edit” menu. STANDBY-ON SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR 1 2 3 Use [K / L] to select “Disc Edit”, then press [OK]. Use [K / L] to select “Disc Protect OFF ON”, then press [OK]. e.g.) DVD+RW Disc Edit Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON 0 SETUP DISC MENU Press [SETUP]. o OK s B TITLE RETURN p B j F h i g C TRACKING -- + VCR REC DVD REC MODE D.DUBBING AUDIO I 4 Use [K / L] to select “Yes”, then press [OK]. Disc Edit Edit Disc Name Erase Disc Make Edits Compatible Protect this disc? Disc Protect OFF ON Yes No CM SKIP SEARCH RAPID PLAY A disc will be protected. This operation may take a while to be completed. NB552 Note To cancel the disc protect: • When you insert a disc protected with this unit, “Disc Protect ON OFF” will appear instead of “OFF ON” at step 3. Disc Edit Edit Disc Name Erase Disc Make Edits Compatible Disc Protect ON OFF To release the protect for the disc, select “Yes” at step 4. 36 EN Finalizing a Disc SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC DEF 2 3 JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR “Disc Edit” menu will appear. Use [K / L] to select “Finalize”, then press [OK]. Use [K / L] to select “Yes”, then press [OK]. e.g.) DVD+R, DVD-R Disc Edit Edit Disc Name Finalize Disc Protect OFF 0 SETUP DISC MENU Finalizing will start. B TITLE Playback OK ON Finalize disc? Yes No o s RETURN p Finalizing B j Recording 1 GHI Use [K / L] to select “Disc Edit”, then press [OK]. Basic Setup STANDBY-ON 1 2 3 4 Press [SETUP]. Connections You will need to finalize discs to play back in other DVD players. Finalizing may take several minutes up to an hour. A shorter recording period on the disc will require a longer time period for finalization. Do not unplug the power cord during finalization. Introduction PLAYING THE DISCS IN OTHER DVD PLAYERS 90% i To cancel finalizing... h C g TRACKING -- + VCR (DVD-RW only) • To cancel finalizing at step 4, press [STOP C], select “Yes” with [K / L], then press [OK]. Finalizing is canceled and the unit will be in stop mode. REC MODE D.DUBBING AUDIO Function Setup REC DVD Editing F I Do you want to cancel ? CM SKIP SEARCH RAPID PLAY Yes No Note • Once you have finalized a DVD+R/ DVD-R, you cannot edit or record anything on that disc. • There is no need to finalize DVD+RW. • When you insert a DVD-RW finalized with this unit, “Undo Finalize” will appear instead of “Finalize”. 5% VCR Functions Finalizing • If appears when pressing [STOP C], you cannot cancel finalizing because the finalizing has been in certain progress. • When selecting “No” and press [OK] or [RETURN], finalizing will be continued. • You cannot cancel finalizing the DVD+R/DVD-R once it has started. Others Disc Edit Edit Disc Name Erase Disc Undo Finalize Disc Protect ON This operation may take a while to be completed. OFF 5 Finalizing is completed. Español To release the finalizing for the disc, select “Undo Finalize” at step 3. * DO NOT power off during finalization, this will result in malfunction. EN 37 PLAYING THE DISCS IN OTHER DVD PLAYERS Auto Finalizing You can finalize discs automatically using this function. You can use this function to finalize discs after finishing all timer recordings and at the end of the disc space. STANDBY-ON SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR 0 SETUP DISC MENU 1 2 3 4 o OK s B TITLE Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. “General Setting” menu will appear. Use [K / L] to select “Recording”, then press [OK]. “Recording” menu will appear. Use [K / L] to select “Auto Finalize”, then press [OK]. Use [K / L] to select “Disc Full” or “End of Timer Rec”, then press [OK]. General Setting Playback Display Video Recording Clock Reset All Auto Chapter Auto Finalize Auto Finalize Dubbing Mode Disc Full Make Recording Compatible End of Timer Rec RETURN p B j F h i g C TRACKING -- + VCR REC DVD 5 Use [K / L] to select “ON”, then press [OK]. e.g.) “Disc Full” General Setting REC MODE D.DUBBING AUDIO Playback Display Video Recording Clock Reset All I CM SKIP SEARCH RAPID PLAY Auto Chapter Auto Finalize Auto Finalize Disc Full Dubbing Mode Disc Full Make Recording Compatible EndON of Timer Rec OFF Your setting will be activated. NB552 38 EN 6 Press [SETUP] to exit. Press [SETUP] and use [K / L 1 Connections Basic Setup Recording Playback Editing Function Setup VCR Functions Others Español 39 EN Introduction DUBBING MODE DUBBING MODE VCR to DVD 4 Use [K / L] to select “VCR then press [OK]. DVD to VCR DVD”, General Setting Playback Display Video Recording Clock Reset All 5 6 Auto Chapter Auto Finalize Dubbing Mode Dubbing Mode Make Recording Compatible VCR DVD DVD VCR Press [SETUP] to exit. Press [VCR]. Press [PLAY B]. Then press [PAUSE F] at the point you wish to start recording. • Since it takes about a few seconds before the actual dubbing begins, please allow extra 5 seconds when selecting the starting point. 7 8 9 4 Press [DVD]. Make sure to select a recording mode using [REC MODE]. Press [D.DUBBING]. VCR to DVD duplication will start. Press [STOP C] to stop the recording. 5 6 7 8 9 Use [K / L] to select “DVD then press [OK]. VCR”, General Setting Playback Display Video Recording Clock Reset All Auto Chapter Auto Finalize Dubbing Mode Dubbing Mode Make Recording Compatible VCR DVD DVD VCR Press [SETUP] to exit. Press [DVD]. Press [PLAY B]. Then press [PAUSE F] at the point you wish to start recording. Press [VCR]. Make sure to select a recording mode using [REC MODE]. Press [D.DUBBING]. DVD to VCR duplication will start. Press [STOP C] to stop the recording. Title list will automatically appear. • If you want to watch the duplicated material after the VCR to DVD duplication, press [OK] and then select “Play” in the title. Note • When you turn off the unit after setting the dubbing mode to DVD VCR, the setting will be set to VCR DVD automatically. • You cannot change the output mode during VCR to DVD or DVD to VCR duplication. For Audio CD to VCR duplication: • This function is available on Audio CD, not MP3 files. For VCR to DVD duplication: • The playback sound mode is followed by the setting of VCR playback sound mode on page 81. Set the playback sound mode to which you wish to record to the DVD. • This unit will automatically stop the duplication if playback with no image is for more than 3 minutes during VCR to DVD duplication. • Dubbing indicator will appear on the front panel display during dubbing. 40 EN Before you play back DVD, read the following information. Playable Discs and Files Playable discs Logos Region Codes Connections This unit is compatible to play back the following discs. To play back a DVD, make sure that it meets the requirements for region codes and color systems as described below. You can play back discs that have the following logos will play back on the unit. Other disc types are not guaranteed to play back. Color Systems DVD is recorded in different color systems throughout the world. The most common color system is NTSC (which is used primarily in the United States and Canada). This unit uses NTSC, so DVD you play back must be recorded in the NTSC system. You cannot play back DVD recorded in other color systems. Introduction INFORMATION ON PLAYBACK DVD-video Basic Setup DVD+RW DVD+R PBC (playback control) for Video CD DVD-R (Finalized video mode discs only) CD-DA (audio CD) Note CD-RW CD-RW/-R You can play back interactive software using menu screens. Refer to instructions in the video CD. CD-R Playable files CD-DA MP3 VCR Functions Hint for DVD Playback The contents of DVD are generally divided into titles. Titles may be further subdivided into chapters. Function Setup Media 1) Press [SETUP]. 2) Use [K / L] to select “CD Playback Mode”, then press [OK]. “CD Playback Mode” menu will appear. 3) Use [K / L] to select “PBC (Video CD only)”, then press [OK]. 4) Use [K / L] to select “ON” or “OFF”, then press [OK]. Your setting will be activated. Editing • PBC setting turns to “ON” when loading video CD with PBC function, thus, even after setting PBC to “OFF” and ejecting the video CD then reloading the video CD, this setting turns to “ON” automatically. • Some operations cannot be performed while PBC function is on. Cancel PBC function temporarily to perform those operations by following the instruction below. video CD Playback You can select images or information on the menu screen by activating the PBC (playback control) function of the video CD. This unit conforms to ver.1.1 and ver. 2.0 of video CD standard with PBC function. Ver.1.1 (without PBC function): You can enjoy playback picture as well as music CD. Ver.2.0 (with PBC function): While using a video CD with PBC function, “PBC” appears on the TV screen. Recording DVD-RW (Finalized video mode discs only) Others Español EN 41 BASIC PLAYBACK Direct Playback 1 2 Press [STANDBY-ON y]. Turn on the TV and be sure to select the input to which the unit is connected. Press [DVD]. Press [OPEN/CLOSE A] to open the disc tray and insert your disc with its label facing up. Align the disc to the disc tray guide. * Make sure the disc is compatible with this unit. (Refer to page 41 for the list of compatible discs.) 3 4 5 Note • Some discs may start playback automatically. • You can select images or information on the menu screen by activating PBC (playback control) function (page 41). 42 EN Press [OPEN/CLOSE A] to close the disc tray. It may take a while to load the disc completely. Press [PLAY B] to start playback. If you are playing back a DVD-video or video CD with PBC function, a menu may appear. Refer to “Using the Title / Disc Menu” on page 46. Press [STOP C] once to stop playback temporarily. • Refer to “Resume Playback” on page 47. Introduction BASIC PLAYBACK Playback from the Title List Press [DVD]. Basic Setup Press [OPEN/CLOSE A] to open the disc tray and insert your disc with its label facing up. Connections 1 2 Press [STANDBY-ON y]. Turn on the TV and be sure to select the input to which the unit is connected. Recording Align the disc to the disc tray guide. * Make sure the disc is compatible with this unit. (Refer to page 41 for the list of compatible discs.) Playback 3 Press [OPEN/CLOSE A] to close the disc tray. It may take a while to load the disc completely. Editing • To exit the title list, press [STOP C]. • To resume the title list, press [TITLE]. Function Setup VCR Functions Others Note Instructions continue on the next page. EN 43 Español • Some discs may start playback automatically. • You can also start playback by pressing [PLAY B] instead of [OK] at step 4. BASIC PLAYBACK 4 Use [K / L] to select a desired title, then press [OK]. 1 SP (2Hr) 5 NOV/21/07 11:00AM E1 SP NOV/21/07 0:20:44 1 SP (2Hr) NOV/21/07 11:00AM E1 SP NOV/21/07 0:20:44 2 2 NOV/22/07 11:35AM E1 EP NOV/22/07 0:10:33 3 3 EMPTY TITLE 1:37:52 SP(2Hr) EMPTY TITLE 1:37:52 SP(2Hr) If you want to see disc information, press [{ ] when the first page of the title list is displayed or press [ K ] when the first title is selected but not when “Play”, “Edit” or “Overwrite” is highlighted. e.g.) DVD+RW No Disc Name Disc DVD+RW Total Titles 3 Disc Space Used 0:30:48 Disc Protect OFF Make Edits Compatible Needed e.g.) DVD+R No Disc Name Disc DVD+R Total Titles 5 Disc Space Used 1:30:48 Disc Protect OFF Finalize Finalized 1. Disc name (Default “No Disc Name”) 2. Disc type (DVD+RW/DVD+R/ DVD-RW/DVD-R) 3. Total number of title (include “EMPTY TITLE”) 4. Total time of recorded disc space 5. Status of disc protection (“ON” is protected disc.) 6. Making edits compatible/finalize • When DVD+RW is inserted: If the disc needs to be set “Make Edits Compatible”, “Needed” is displayed. Otherwise, “Not Needed” is displayed. (Refer to page 68.) • When DVD+R, DVD-RW or DVD-R is inserted: If “Finalize” is done, “Finalized” is displayed. Otherwise, “Unfinalized” is displayed. EN Play Edit Overwrite NOV/22/07 11:35AM E1 EP NOV/22/07 0:10:33 • For Video CD, when “PBC (Video CD only)” in “CD playback Mode” menu is set to “ON”, the video CD main menu will appear when inserting a disc. In such case, select a numbered menu with [the Number buttons]. • Press [B] to display the next page, and press [{] to display the previous page. 44 Use [K / L] to select “Play”, then press [OK]. Playback will start. 6 Press [STOP C] once to stop playback temporarily. • Refer to “Resume Playback” on page 47. To eject the disc, press [OPEN/CLOSE A] to open the disc tray, then remove the disc before turning off the unit. Introduction BASIC PLAYBACK Playing Back an Audio CD and a CD-RW/-R with MP3 Files SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC DEF 2 3 JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR OK s B TITLE RETURN p B j C g TRACKING -- + VCR DVD e.g.) File list File List DISC NAME A B C D 1 2 3 4 MP3 MP3 MP3 MP3 Playback h i 3 Use [K / L] to select a desired folder or track/file, then press [OK]. Recording SETUP o F It may take a while to load the disc completely. When an audio CD is inserted, track list will appear. When a CD-RW/-R with MP3 files is inserted, file list will appear. • To exit the track/file list, press [STOP C]. • To resume the track/file list, press [TITLE]. 0 DISC MENU Press [OPEN/CLOSE A] to close the disc tray. Basic Setup 1 GHI 1 2 Connections STANDBY-ON Follow steps 1 to 2 in “Direct Playback” on page 42. file1 file2 file3 file4 1/ 2 REC REC MODE D.DUBBING AUDIO Others Español • The audio source of MP3 files cannot be recorded as digital sound by an MD or DAT deck. • Files whose extension is other than “.mp3(MP3)” will not be listed. • Some unplayable folders or files may be listed due to the recording status. VCR Functions Note Function Setup NB552 When selecting track/file: Playback will start. When selecting the folder (Not available for audio CD): The files in the folder will appear. Use [K / L] to select the file or folder you want to play back, then press [OK]. • Press [PLAY B], [OK] or [B] to move to any lower hierarchies. • Press [s] or [RETURN] to move back to the previous hierarchy. Hints for audio CD tracks and MP3 files: . • Folders are shown by . • Audio CD tracks are shown by • MP3 files are shown by 3 . • The system can recognize up to 255 folders, up to 99 tracks/999 files. • Letters of a file/folder name overflowing the given space will be displayed as “...”. Unrecognizable characters will be replaced with asterisks. • If there are no files in the folder, “No Files” will be displayed. It is recommended that files to be played back in this unit are recorded under the following specifications: • Sampling frequency : 44.1 kHz or 48 kHz. • Constant bit rate : 112 kbps - 320 kbps Editing I CM SKIP SEARCH RAPID PLAY EN 45 BASIC PLAYBACK Using the Title / Disc Menu DVD or video CD with PBC function may contain a title list, which describes the contents of the disc, or a disc menu, which guides you through the available functions in the disc. Press [DVD] first. 1) Press [TITLE] or [DISC MENU] to call up the title list or disc menu. Pause Press [DVD] first. 1) During playback, press [PAUSE F]. Playback will be paused and sound will be muted. 2) Use [K / L / { / B] to make a selection, and then press [OK] to enable your selection. 3) Press [STOP C] to exit. F 2) Press [PLAY B] to return to the normal playback. Note Note • You can select a numbered menu with [the Number buttons] also. • Menus vary among discs. Refer to the information accompanying the disc for details. • [TITLE] or [DISC MENU] will not always be active with all DVD. • For video CD, when “PBC (Video CD only)” in “CD Playback Mode” menu is “ON”, the video CD main menu will appear when inserting a disc. • On DVD, set “Still Mode” to “Field” in “Playback” menu if pictures in the pause mode are blurred. (Refer to page 74.) 46 EN Resume Playback Resume ON You can skip TV commercials to enjoy the recorded programs without interrupting. Press [DVD] first. During playback, press [CM SKIP]. Normal playback will start at 30 seconds ahead from the point you press [CM SKIP]. Every time you press [CM SKIP], the searching point will be extended by 30 seconds ahead. You can press [CM SKIP] up to 6 times (180 seconds). e.g.) Press [CM SKIP] once. Recording Note • For MP3 files, playback will resume from the beginning of the file at which playback was stopped. • Some video CD with the PBC function resume playback from the beginning of the track. Playback CM Skip 30 sec. (forwarding 30 seconds) Fast Forward / Fast Reverse Playback g h 20x g h 5x g h normal speed playback g h 2x g h 20x g h B Function Setup 40x Editing Press [DVD] first. 1) During playback, press [D] or [E]. Every time you press [D] or [E], approximate speed will be changed as follows. Fast forward or fast reverse playback across titles (for DVD) or files (for MP3 files) is not possible. Basic Setup 2) Press [PLAY B]. In a few seconds, playback will resume from the point at which it stopped last. You can resume playback at the same point even if you turn off the unit. To cancel the resume playback and start playing back the disc from the beginning, press [STOP C] again while the playback is stopped. Skipping TV Commercials During Playback Connections You can play back from where you stopped playing back the disc last. Press [DVD] first. 1) During playback, press [STOP C]. The resume message will appear. Introduction SPECIAL PLAYBACK Playback will return to the normal playback. 40x VCR Functions For video CD, approximate forward/reverse speeds are 2x, 8x, 16x. For audio CD, MP3 files, approximate speed is fixed at / ). 8x with sound (indicated with 2) Press [PLAY B] to return to the normal playback. Note Others • Forward/reverse speed will be indicated with icons as follows. forward (approx. speed) 2x: 20x: 40x: reverse (approx. speed) 5x: 20x: 40x: Español EN 47 SPECIAL PLAYBACK Rapid Playback Rapid playback function is available only during playback. This function is available only on discs recorded in the Dolby Digital format, and plays back in a slightly faster/ slower speed while keeping the sound quality just as normal playback. Press [DVD] first. 1) During playback, press [RAPID PLAY]. B : Press [RAPID PLAY] once during playback. Plays back approximately at 0.8 times of normal playback. B : Press [RAPID PLAY] twice during playback. Plays back approximately at 1.3 times of normal playback. B: Press [RAPID PLAY] 3 times to play back in normal speed. No effects. 2) Press [PLAY B] to continue the normal playback. 48 EN Introduction SPECIAL PLAYBACK Marker Setting Zoom 2) Use [{ / B] to select , then press [OK] within 1 second or wait for 1 second to display the selection menu. e.g.) DVD-video 1/ 5 0:01:00 / 1:23:45 DVD Video 2) Use [{ / B] to select , then press [OK] within 1 second or wait for 1 second to display the marker list. e.g.) DVD-video 1/ 5 1/ 5 0:01:00 / 1:23:45 Basic Setup 1/ 5 This feature allows you to assign a specific point on a disc to be called back later. Press [DVD] first. 1) During playback, press [DISPLAY]. Connections Press [DVD] first. 1) During playback, press [DISPLAY]. DVD Video 1/ 5 1/ 5 Recording 3) Use [K / L] to select a desired zoom factor to zoom, then press [OK]. 0:01:00 / 1:23:45 DVD Video × 1.2 × 1.5 × 2.0 3) Use [K / L] to select a desired marker number. When it reaches the desired point, press [OK]. 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video 2 Zoom menu will appear. There are four options (x1.0, x1.2, x1.5 and x2.0), these are displayed excluding the current zoom rate. Zoom area will be displayed. 4 5 6 The title (track) number and the time will be displayed. 4) To return to the marker later: Use [K / L] to select the desired marker number, then press [OK]. Function Setup Note Note Others • When selecting a smaller factor than the current one, the zoom area will not be displayed. • To exit the zoom menu, press [DISPLAY] again at step 1. • To cancel the zoom function, select “x1.0” using [K / L], then press [OK]. • To clear a marker, select the marker number to be cleared, then press [CLEAR]. • All markers will be erased when you operate these operations listed below. – Opening the disc tray – Turning off the power – Record on a recordable disc • You can mark up to 6 points. • Marker setting is not available when you play back the video CD with PBC function. VCR Functions Zoom playback will start. Editing 4) Use [K / L / { / B] to select a desired zoom position, then press [OK]. 3 ------------- Playback 1 Español EN 49 SEARCH Title / Chapter Search Track Search Using [PREV H] / [NEXT G] Using [PREV H] / [NEXT G] Press [DVD] first. 1) During playback, press [NEXT G] to skip the current title or chapter and move to the next. The title or chapter will move forward by one at a time. • If there is no chapter in one title, the current title will be skipped. Press [DVD] first. 1) During playback, press [NEXT G] to skip the current track/file and move to the next. The track/file will move forward one at a time. To go back to the beginning of the current track/file, press [PREV H]. Press it repeatedly to go to the previous track/file. The track/file will move backward one at a time. To go back to the beginning of the current title or chapter, press [PREV H]. Press it repeatedly to go to the previous title or chapter. The title or chapter will move backward one at a time. Using [DISPLAY] Press [DVD] first. 1) During playback, press [DISPLAY]. Using [DISPLAY] Press [DVD] first. 1) During playback, press [DISPLAY]. 2) Use [{ / B] to select e.g.) audio CD 1/ 5 2) Use [{ / B] to select e.g.) DVD-video 1/ 5 , then press [OK]. 0:00:15 / 0:05:00 , then press [OK]. 1/ 5 0:01:00 / 1:23:45 DVD Video CD e.g.) MP3 files 1/ 5 0:00:15 MP3 The number next to will be highlighted. 3) Title: Use [K / L] or [the Number buttons] to enter a desired title number to search, then press [OK]. Title search will start. Chapter: for Press [B] to move to the number next to chapter. Use [K / L] or [the Number buttons] to enter a desired chapter number to search, then press [OK]. After the search, playback will start automatically. Note • In search mode display, total numbers of each search contents (title/chapter/time) are shown as a denominator. 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video total number total time of titles of the title total number of chapters 50 EN The number next to will be highlighted. 3) Use [K / L] or [the Number buttons] to enter a desired track/file number to search, then press [OK]. After the search, playback will start automatically. Note • During CD playback you can enter a track number directly using [the Number buttons] for track search without displaying the menu. • Track search is not available when you play back the video CD with PBC function. Introduction SEARCH Time Search Connections Press [DVD] first. 1) During playback, press [DISPLAY]. , then press [OK]. 2) Use [{ / B] to select e.g.) DVD-video 1/ 5 0:01:00 / 1:23:45 Basic Setup 1/ 5 DVD Video e.g.) audio CD 1/ 5 0:00:15 / 0:05:00 Recording CD The number next to will be highlighted. To move to the number next to , press [B]. and time Playback When time search is not available, counter are not displayed. 3) Use [K / L / { / B] or [the Number buttons] to enter a desired time to search, then press [OK]. After the search, playback will start automatically. Editing Note • Time search is available only in the same track, file or title. • Time search is not available when you play back the video CD with PBC function. Function Setup VCR Functions Others Español EN 51 REPEAT / RANDOM / PROGRAM PLAYBACK Repeat Playback Available repeat function may vary depending the discs. Press [DVD] first. 1) During playback press [DISPLAY]. , then press [OK] within 1 2) Use [{ / B] to select second or wait for 1 second to display the selection menu. 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video Random Playback 3) Use [K / L] to select a desired option to repeat, then press [OK]. e.g.) DVD-video 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video OFF Title Chapter A–B e.g.) audio CD, video CD 1/ 5 0:00:15 / 0:05:00 CD OFF Track All A–B e.g.) MP3 files 1/ 5 0:00:15 MP3 52 EN Introduction REPEAT / RANDOM / PROGRAM PLAYBACK Program Playback Connections You can program the disc to play back in your desired order. Press [DVD] first. 1) Press [SETUP]. Basic Setup 2) Use [K / L] to select “CD Playback Mode”, then press [OK]. “CD Playback Mode” menu will appear. 3) Use [K / L] to select “Program Play”, then press [OK]. Recording 4) Use [K / L] to select a desired track, then press [OK] or [B]. CD Playback Mode Program Play -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Playback Total 0:00:00 Repeat this step until you program all the desired tracks. 5) Press [PLAY B]. Editing CD Playback Mode Program Play 04 10 06 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Total Function Setup 09 0:31:07 Program playback will start. Note VCR Functions Others • To erase tracks you selected, press [CLEAR] at step 4. • You can make program settings up to 50 tracks. • To cancel program playback, press [STOP C] twice during program playback. “OFF” appears on the TV screen. • You may also select a desired track using [the Number buttons] at step 4. • For video CD with PBC function, the PBC setting will be switched to off automatically when you start program playback. Español EN 53 SELECTING THE FORMAT OF AUDIO AND VIDEO You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back. Switching Subtitles Switching Audio Soundtrack DVD-video may have subtitles in 1 or more languages. Available subtitle languages can be found on the disc case. You can switch subtitle languages anytime during playback. Press [DVD] first. 1) During playback, press [DISPLAY]. 2) Use [{ / B] to select , then press [OK] within 1 second or wait for 1 second to display the selection menu. e.g.) DVD-video 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video When playing back a DVD-video recorded with 2 or more soundtracks (these are often in different languages), you can switch them during playback. When playing back video CD, audio CD you can switch “L/R”(stereo), “L”(left) or “R”(right). Press [DVD] first. 1) During playback, press [DISPLAY]. 2) Use [{ / B] to select , then press [OK] within 1 second or wait for 1 second to display the selection menu. 3) Use [K / L] to select a desired audio soundtrack or audio channel, then press [OK]. For DVD-video • Audio soundtrack will switch. 1/ 5 3) Use [K / L] to select a desired subtitle language, then press [OK]. 1/ 5 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video 1.Dolby Digital 5.1ch English 2.Dolby Digital 2ch English 0:01:00 / 1:23:45 DVD Video OFF 1.English Subtitle will be displayed in the selected language. When selecting “OFF”, subtitle will disappear. • If the title contains both main and sub audio, you can further select “L” (main), “R” (sub), or “L/R” (mixed of main and sub). For audio CD, video CD • Audio channel will switch. e.g.) audio CD 1/ 5 Note • Some discs will only allow you to change the subtitle from the disc menu. Press [TITLE] or [DISC MENU] to display the disc menu. • If a 4-digit language code appears in the subtitle menu, refer to the “LANGUAGE CODE” on page 87. 0:00:15 / 0:05:00 CD 1. L/R 2. L 3. R Note • Some discs will only allow you to change the soundtrack from the disc menu. Press [TITLE] or [DISC MENU] to display the disc menu. 54 EN Switching Virtual Surround System 2) Use [{ / B] to select e.g.) DVD-video 1/ 5 , then press [OK]. 1/ 5 Basic Setup 2) Use [{ / B] to select , then press [OK] within 1 second or wait for 1 second to display the selection menu. e.g.) DVD-video 1/ 5 Some DVD-video have scenes shot from 2 or more angles. Angle information should be on the disc case if the disc contains multi-angle scenes. Press [DVD] first. 1) During playback, press [DISPLAY]. Press [DVD] first. 1) During playback, press [DISPLAY]. 1/ 5 Switching Camera Angles Connections You can enjoy stereophonic virtual space through your existing 2 channel stereo system. Introduction SELECTING THE FORMAT OF AUDIO AND VIDEO 0:01:00 / 1:23:45 DVD Video 0:01:00 / 1:23:45 DVD Video 1/ 5 1/ 5 0:01:00 / 1:23:45 OFF : no effect Type 1 : natural effect Type 2 : emphasized effect Angle icon appears when a switching camera angle is available. Angle will switch each time you press [OK]. Playback DVD Video OFF Type 1 Type 2 Recording 3) Use [K / L] to select “OFF”, “Type 1” or “Type 2”, then press [OK]. e.g.) DVD-video Note • Angle icon does not appear on the TV screen in a case you set “Angle Icon” to “OFF” in “Playback” menu. Refer to page 74. Editing Reducing Block Noise Note • Select “OFF” in a case sound is distorted. • The setting will be kept even when the unit is turned off. Press [DVD] first. 1) During playback, press [DISPLAY]. 1/ 5 1/ 5 0:01:00 / 1:23:45 Function Setup 2) Use [{ / B] to select , then press [OK] within 1 second or wait for 1 second to display the selection menu. e.g.) DVD-video DVD Video VCR Functions 3) Use [K / L] to select a desired option, then press [OK]. 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video OFF Type 1 Type 2 55 Español EN Others Your setting will be activated. This function reduces noise in the playback picture. If noises appear on the TV screen during playing back discs recorded in long time recording mode such as EP or SLP, select “Type 1” or “Type 2”. (“Type 2” is more effective.) When playing back discs with a few noises such as DVD-video, select “OFF”. INFORMATION ON DISC EDITING Guide to a Title List Editing Discs Title list allows you to check the titles recorded on the disc easily. You can choose a title to play back from this list and easily edit the titles as you prefer. Press [TITLE]. 2 1 3 4 1 SP (2Hr) NOV/21/07 11:00AM E1 SP NOV/21/07 0:20:44 Play Edit Overwrite 2 NOV/22/07 11:35AM E1 EP NOV/22/07 0:10:33 3 EMPTY TITLE 1:37:52 SP(2Hr) 6 2 5 Note Edit Title Delete 2 Edit Title Name Chapter Mark Hide Chapter Index Picture Title Dividing NOV/22/07 11:35AM E1 EP 0:00:59 11 10 9 8 7 1. Title list: List of the titles recorded on the disc, and their information. 2. Arrow: Indicating there is a previous / next page. 3. Title information: On the first line, title name (editable) is displayed. On the second line, the length of the title is displayed. Empty title: The portion of the disc where there is no recordings are made. As for the empty title, available recording time by the selected recording mode is displayed on the second line. 4. Recording mode: Currently selected recording mode is displayed here. 5. Capacity indicator: Indicating the position and the amount of each title in the disc. The portion for the selected title is highlighted. 6. Thumbnails: A cut from the recorded content is displayed here. 7. Submenu: Submenus for the selected menu are displayed here. 8. Title name (editable): If you do not name the title, the recorded date, time, selected external input position, and the recording mode are displayed here. 9. Progress bar: Indicating the progress of the playback. 10. Preview window: Preview of the selected title is displayed here. 11. Playback status: Indicating the current playback status of the selected title. Press [STOP C] to exit the title list. 56 EN You can edit discs for the following items. Be sure that once you edit titles, they will not remain as original. • Deleting Titles (Refer to page 57.) • Putting Names on Titles (Refer to page 58.) • Setting Chapter Marks (Refer to page 59.) • Clearing Chapter Marks (Refer to pages 60-61.) • Hiding Chapters (Refer to page 62.) • Setting Pictures for Thumbnails (Refer to page 63.) • Dividing a Title (DVD+RW/DVD-RW only) (Refer to page 64.) • Putting Name on Disc (Refer to page 65.) • Setting or Releasing Disc Protect (Refer to page 66.) • Erasing Disc (Refer to page 67.) • Making Edits Compatible (Refer to page 68.) • When selecting “Edit” on pop-up menu of the title list and edit the title, the title list is displayed after writing the edited contents onto the disc. • The capacity indicator in the right side of the title list may not indicate the precise capacity in the disc. • The capacity indicator may not indicate the capacity for the titles of which recording time is short. • Once you have finalized a DVD+R/DVD-R, you cannot edit or record anything on that disc. Introduction EDITING DISCS Deleting Titles 3 Use [K / L] to select “Edit”, then press [OK]. Play Edit Overwrite Connections You can delete titles which you do not need anymore. Please be advised that the titles once deleted cannot be brought back to the disc. For DVD+RW/DVD-RW, when the last recorded title in the title list is deleted, the available disc space to record on will be increased. For DVD+R/DVD-R, the disc space to record on will not be changed. SP (2Hr) 1 NOV/21/07 11:00AM E1 SP NOV/21/07 0:20:44 2 NOV/22/07 11:35AM E1 EP NOV/22/07 0:10:33 3 Basic Setup EMPTY TITLE 1:37:52 SP(2Hr) STANDBY-ON SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC DEF 2 3 JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR 4 Recording 1 GHI Use [K / L] to select “Title Delete”, then press [OK]. Edit 1 Title Delete Edit Title Name Chapter Mark Hide Chapter Index Picture 0 Title Dividing DISC MENU SETUP NOV/21/07 11:00AM E1 SP 0:00:59 OK s B TITLE RETURN p B j h g 5 Edit - Title Delete C 1 Editing F i Use [K / L] to select “Yes”, then press [OK]. Yes No 0:00:59 Use [K / L] to select a desired title, then press [OK]. After that, “Are you sure?” will appear, select “Yes” and then press [OK]. Title will be deleted. Data will be written onto the disc momentarily. 90% SP (2Hr) NOV/21/07 11:00AM E1 SP NOV/21/07 0:20:44 2 This operation may take a while to be completed. NOV/22/07 11:35AM E1 EP NOV/22/07 0:10:33 3 EMPTY TITLE 1:37:52 SP(2Hr) After editing is complete, the title list will appear. e.g.) DVD+RW/DVD-RW Others 1 VCR Functions Writing to Disc 1 Function Setup 1 2 NOV/21/07 11:00AM E1 SP Press [DVD] first. Press [TITLE]. Playback o SP (2Hr) EMPTY TITLE 0:21:14 SP(2Hr) 2 Note 3 EMPTY TITLE 1:37:52 SP(2Hr) Español • Deleted part of the titles in the capacity indicator changes in color. • As for DVD+RW/DVD-RW if you delete the title, deleted title will be displayed as “EMPTY TITLE”. NOV/22/07 11:35AM E1 EP NOV/22/07 0:10:33 EN 57 EDITING DISCS Putting Names on Titles You can put title names on the titles and change the names from this menu. STANDBY-ON 4 Use [K / L] to select “Yes”, then press [OK]. Edit - Edit Title Name 1 Yes No SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC 1 2 DEF 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR MY FAVORITE 0:00:59 The name you entered will be activated for the title. 0 DISC MENU 5 SETUP o OK s B TITLE After this operation is completed, press [RETURN] to exit. Data will be written onto the disc momentarily. RETURN This operation may take a while to be completed. p B j F 1 2 h i g Guide to Edit Title Name C Follow steps 1 to 3 in “Deleting Titles” on page 57 to display “Edit” menu. Use [K / L] to select “Edit Title Name”, then press [OK]. Edit 1 Title Delete Edit Title Name Chapter Mark Hide Chapter Index Picture Title Dividing NOV/21/07 11:00AM E1 SP 0:00:59 3 To enter a title name, follow the steps of “Guide to Edit Title Name” on this page. Edit - Edit Title Name 1 A B C a b c character set 1 2 3 @ ! ? M 0:00:59 area for entering title names When you finish entering a title name, press [OK]. 58 EN 1) Use [K / L] to select a desired character set, then press [OK]. 2) Follow the list below, use [the Number buttons] repeatedly until the desired letter appears. Select ABC abc 123 @!? 0 0 1 (*1) (*1) 1 ! ”# $ % & ’( ) *+,-./:;<=> ?@[]^_{|} 2 ABC abc 2 (*2) 3 DEF def 3 (*2) 4 GHI ghi 4 (*2) 5 JKL jkl 5 (*2) 6 MNO mno 6 (*2) 7 PQRS pqrs 7 (*2) 8 TUV tuv 8 (*2) 9 WXYZ wxyz 9 (*2) Press *1 Press 1 , character set will be changed to the “ @!? ” mode automatically. *2 Press 2 to 9 , character set will be changed to the previous input mode automatically. • To delete letters, press [CLEAR] repeatedly. Holding [CLEAR] to delete all letters. • Use [s / B] to move the cursor to the left and right. • You can enter up to 30 letters. Note • Undefined letters in a title name are shown by “*”. If you delete them, adjoining letters may change to “*” or other. Introduction EDITING DISCS Setting Chapter Marks You can put chapter marks in each title. Once a chapter is marked, you can use it for the chapter search feature. Submenu will appear. Press [PLAY B] and then [PAUSE F] to decide the point at which you will create a new chapter mark. • It is convenient to use [PREV H], [NEXT G], [E] and [D] for finding the point to add a new chapter mark. Recording Use [K / L] to select “Add”, then press [OK]. Basic Setup 4 Use [K / L] to select “Chapter Mark”, then press [OK]. Connections 1 2 3 Follow steps 1 to 3 in “Deleting Titles” on page 57 to display “Edit” menu. Edit - Chapter Mark 1 Add Delete Playback Delete All Chapter 2/ 2 NOV/21/07 11:00AM E1 SP 0:00:59 Editing 5 Use [K / L] to select “Yes”, then press [OK]. Edit - Chapter Mark - Add 1 Yes Function Setup No Chapter 2/ 2 F NOV/21/07 11:00AM E1 SP 0:00:59 A new chapter mark will be added. Note This operation may take a while to be completed. Others • When the number of chapter marks in a title is 99 and the number of chapter marks in a disc is 254, chapter marks cannot be added. • Besides the above-mentioned, it is not likely to be able to add according to recorded time and number of chapters. • Remaining time of the disc may decrease when adding chapter marks or increase when clearing chapter marks depending on the recording time or edited contents. VCR Functions 6 Press [RETURN] twice to exit. Data will be written onto the disc momentarily. Español EN 59 EDITING DISCS Clearing Chapter Marks 1 2 3 4 5 Follow steps 1 to 3 in “Deleting Titles” on page 57 to display “Edit” menu. Use [K / L] to select “Chapter Mark”, then press [OK]. Submenu will appear. Use [PREV H] / [NEXT G] to select a chapter mark to be deleted. Use [K / L] to select “Delete”, then press [OK]. Use [K / L] to select “Yes”, then press [OK]. Edit - Chapter Mark - Delete 1 Yes No Chapter 2/ 2 F NOV/21/07 11:00AM E1 SP 0:00:59 The selected chapter mark will be deleted. 6 Note • Remaining time of the disc may decrease when adding chapter marks or increase when clearing chapter marks depending on the recording time or edited contents. 60 EN Press [RETURN] twice to exit. Data will be written onto the disc momentarily. This operation may take a while to be completed. Introduction EDITING DISCS Clearing Chapter Marks (cont’d) SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC 1 2 DEF 3 GHI JKL MNO 5 6 TUV WXYZ 7 8 9 TIMER SPACE CLEAR 0 DISC MENU SETUP o B RETURN p B j F h i g C Use [K / L] to select “Chapter Mark”, then press [OK]. Submenu will appear. Use [K / L] to select “Delete All”, then press [OK]. Use [K / L] to select “Yes”, then press [OK]. Edit - Chapter Mark - Delete All No + VCR REC Yes Playback 1 TRACKING -- Chapter DVD Recording OK s TITLE 1 2 3 4 Follow steps 1 to 3 in “Deleting Titles” on page 57 to display “Edit” menu. Basic Setup 4 PQRS To delete all chapter marks: Connections STANDBY-ON 2/ 2 F NOV/21/07 11:00AM E1 SP REC MODE D.DUBBING AUDIO 0:00:59 I CM SKIP SEARCH RAPID PLAY Editing 5 Use [K / L] to select “Yes”, then press [OK]. Edit - Chapter Mark - Delete All Function Setup 1 Are you sure? Yes No Chapter 2/ 2 NB552 NOV/21/07 11:00AM E1 SP 0:00:59 6 Press [RETURN] twice to exit. Data will be written onto the disc momentarily. This operation may take a while to be completed. VCR Functions All chapter marks will be deleted. Others Note Español • Remaining time of the disc may decrease when adding chapter marks or increase when clearing chapter marks depending on the recording time or edited contents. EN 61 EDITING DISCS Hiding Chapters You can hide chapters from the title list. Hidden chapters are skipped during playback. STANDBY-ON SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR 0 DISC MENU SETUP o OK s 1 2 3 4 Follow steps 1 to 3 in “Deleting Titles” on page 57 to display “Edit” menu. Use [K / L] to select “Hide Chapter”, then press [OK]. Submenu will appear. Use [PREV H] / [NEXT G] to decide the chapter to be hidden. Use [K / L] to select “Hidden”, then press [OK]. Edit - Hide Chapter B TITLE 1 Chapter p B j F h Visible Hidden RETURN 2/ 2 Visible i g NOV/21/07 11:00AM E1 SP C 0:00:59 TRACKING -- + VCR REC DVD REC MODE D.DUBBING AUDIO I CM SKIP SEARCH RAPID PLAY Note • ”Hidden” will be displayed in the preview window while previewing the hidden chapter. • When you make all chapters in the title “Hidden”, “Hidden” is displayed in a thumbnail of the title list. 1 SP (2Hr) NOV/21/07 11:00AM E1 SP NOV/21/07 0:20:44 2 NOV/22/07 11:35AM E1 EP NOV/22/07 0:10:33 3 EMPTY TITLE 1:37:52 SP(2Hr) 62 EN Data will be written onto the disc momentarily. This operation may take a while to be completed. If you want hidden chapters to be “Visible”, select the chapter to be shown. Then use [K / L] to select “Visible” at the step 4 on this page. Data will be written onto the disc momentarily. After that, title list is displayed. NB552 Hidden 5 After this operation is completed, press [RETURN] twice to exit. Introduction EDITING DISCS Setting Pictures for Thumbnails Use [K / L] to select “Index Picture”, then press [OK]. 1 Recording Use [K / L] to select “Yes”, then press [OK]. Basic Setup Use [PREV H], [NEXT G], [E], [D], [PAUSE F] and [PLAY B] to decide the picture you want to select as a thumbnail. Connections 1 2 3 4 Follow steps 1 to 3 in “Deleting Titles” on page 57 to display “Edit” menu. Yes No Playback Editing Function Setup VCR Functions Others Español EN 63 EDITING DISCS Dividing a Title You can divide one title into 2 new titles. 1 2 3 4 Follow steps 1 to 3 in “Deleting Titles” on page 57 to display “Edit” menu. Use [PREV H], [NEXT G], [E], [D], [PAUSE F] and [PLAY B] to decide the point at which you will divide the title. Use [K / L] to select “Title Dividing”, then press [OK]. Use [K / L] to select “Yes”, then press [OK]. Edit - Title Dividing 1 Yes No F NOV/21/07 11:00AM E1 SP 0:00:59 The title will be divided into 2 new titles. Both title names are identical, and index pictures are reset to the first scene at this point. Data will be written onto the disc momentarily. This operation may take a while to be completed. Note • You cannot divide a title of the disc when the number of recording titles reaches the maximum of 49, and the number of recording chapters reaches the maximum of 254. 64 EN Introduction EDITING DISCS Putting Name on Disc You can put a name on the disc and change it from this menu. SOURCE TIMER SET DISPLAY OPEN/CLOSE A ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR 0 Use [K / L] to select “Disc Edit”, then press [OK]. Use [K / L] to select “Edit Disc Name”, then press [OK]. e.g.) DVD+RW Recording SETUP DISC MENU Press [DVD] first. Press [SETUP]. Disc Edit o OK s Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON B TITLE RETURN p A window for entering a title name will appear. B j h i Edit Disc Name A B C C g a b c No Disc Name 1 2 3 TRACKING -- + VCR REC Playback F Basic Setup .@/: 1 2 3 Connections STANDBY-ON Press [STOP C] if you are playing back a disc. Disc DVD+RW Total Titles 3 Disc Space Used 0:30:48 Disc Protect OFF Make Edits Compatible Needed @ ! ? DVD REC MODE D.DUBBING AUDIO 0:00:00 CM SKIP SEARCH RAPID PLAY When you finish entering a title name, press [OK]. Use [K / L] to select “Yes”, then press [OK]. Function Setup NB552 Edit Disc Name VCR Functions 4 5 To enter a disc name, follow the steps of “Guide to Edit Title Name” on page 58. Editing I Yes No No Disc Name Disc DVD+RW Total Titles 3 Disc Space Used 0:30:48 Disc Protect OFF Make Edits Compatible Needed MY FAVORITE DISC 0:00:00 This operation may take a while to be completed. Others The name you entered will be activated for the title. Data will be written onto the disc momentarily. Note Español • You cannot select “Disc Edit” when finalized DVD+R or DVD-R is inserted. EN 65 EDITING DISCS Setting or Releasing Disc Protect To prevent accidental editing, or erasing the titles, you can protect them. STANDBY-ON SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR 1 2 Follow steps 1 to 2 in “Putting Name on Disc” on page 65 to display “Disc Edit” menu. Use [K / L] to select “Disc Protect OFF ON”, then press [OK]. e.g.) DVD+RW Disc Edit Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON 0 DISC MENU SETUP o OK s • If the disc is already protected, “Disc Protect ON OFF” will appear instead of “Disc Protect OFF ON”. B TITLE RETURN p B j F h i g C TRACKING -- + VCR DVD 3 Use [K / L] to select “Yes”, then press [OK]. Disc Edit Edit Disc Name Erase Disc Make Edits Compatible Protect this disc? Disc Protect OFF ON Yes No REC REC MODE D.DUBBING AUDIO I CM SKIP SEARCH RAPID PLAY Data will be written onto the disc momentarily. This operation may take a while to be completed. NB552 66 EN Introduction EDITING DISCS Erasing Disc Press [STOP C] if you are playing back a disc. You can erase all titles on a disc. SOURCE TIMER SET DISPLAY OPEN/CLOSE A ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR Use [K / L] to select “Erase Disc”, then press [OK]. Basic Setup .@/: 1 2 e.g.) DVD+RW Disc Edit Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON Recording 0 DISC MENU SETUP o OK s B TITLE RETURN p F h i C g TRACKING -- + VCR DVD 3 Use [K / L] to select “Yes”, then press [OK]. Disc Edit Edit Disc Name Erase Disc Make Edits Compatible When you Disc Protect OFF ON press “Yes”, all the contents in the disc will be erased. Are you sure to erase the disc? Editing Yes No Playback B j REC Connections STANDBY-ON Follow steps 1 to 2 in “Putting Name on Disc” on page 65 to display “Disc Edit” menu. REC MODE D.DUBBING AUDIO I CM SKIP SEARCH RAPID PLAY Data will be written onto the disc momentarily. Function Setup This operation may take a while to be completed. NB552 VCR Functions Others Note Español • When you select “Yes” at step 3, all contents of the disc will be erased. EN 67 EDITING DISCS Making Edits Compatible If you have added or deleted chapters, or made chapters hidden, you must perform “Make Edits Compatible” to see those effects on other unit. STANDBY-ON SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL 4 5 6 PQRS TUV WXYZ Press [STOP C] if you are playing back a disc. 1 2 Follow steps 1 to 2 in “Putting Name on Disc” on page 65 to display “Disc Edit” menu. 3 Use [K / L] to select “Yes”, then press [OK]. MNO 7 8 9 TIMER SPACE CLEAR Use [K / L] to select “Make Edits Compatible”, then press [OK]. Disc Edit Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON 0 DISC MENU SETUP o OK s B TITLE RETURN p B j F h i C g Yes No TRACKING -- + VCR REC DVD REC MODE D.DUBBING AUDIO I CM SKIP SEARCH RAPID PLAY NB552 68 EN Disc Edit Edit Disc Name Erase Disc Make Edits Compatible Activate Make Edits Compatible? Disc Protect OFF theON Data will be written onto the disc momentarily. This operation may take a while to be completed. The following table is the contents which you can set and the default setting. Refer to the following table for useful operation. Setup Items (highlight is the default) Playback Parental Lock Pages 71-74 Disc Audio PCM Dolby Digital Disc Menu Language Still Mode Display Page 75 OSD Language Screen Saver FL Dimmer Video Input Page 14 E1(Rear) Set to the progressive scan mode (set to "ON") or to the interlace scan mode(set to "OFF"). Set a picture size according to aspect ratio of your TV. Set the video input type for the external input. VCR Functions E2(Front) 4:3 Letter Box 4:3 Pan & Scan 16:9 Wide Video In S-Video In Video In S-Video In Set the brightness of the front panel display. Function Setup Video Progressive Scan Pages 76-77 TV Aspect Set the idling time before the screen saver starts. Editing Français Español OFF 5minutes 10minutes 15minutes 30miniutes Auto Bright Dark ON OFF Playback General Setting Angle Icon Recording Subtitle Language Basic Setup Audio Language Connections Dynamic Range Control Contents Set the parental level for DVD playback. OFF level 8 [Adult] to 1 [Kid Safe] Compressing the range of sound volume. ON OFF Set whether the sound recorded in 96kHz will 48kHz be down sampled in 48kHz. 96kHz Set the type of sound signal which outputs PCM from the digital audio output jack. Stream Set the language for disc menu language. English French Spanish Other Set the language for audio. Original English French Spanish Other Set the language for subtitles. OFF English French Spanish Other Set whether or not to display the angle icon. ON OFF Set the type of still image in pausing playback. Auto Field Frame Set the language for OSD (on-screen display). English Introduction LIST OF SETTINGS Others Español EN 69 LIST OF SETTINGS General Setting Setup Recording Items (highlight is the default) Auto Chapter Page 23 OFF 5 minutes 10 minutes 15 minutes 30 minutes 60 minutes Disc Full ON Auto Finalize OFF Page 38 End of Timer Rec ON OFF Dubbing Mode Pages 39-40 VCR DVD DVD VCR Make Recording Compatible ON OFF Page 23 Clock Setting Clock Page 21 Reset All Page 78 Yes No Note • Your change to each settings stays on even when the power is off. • An item which is not currently available is grayed in the settings. 70 EN Contents Insert chapter marks at even time interval. Set the unit to finalize the disc automatically. Set the VCR to DVD (DVD to VCR) duplication. Set to prohibiting additional recording (OFF) or to replace the title list after recording (ON). Set the clock. Set to the default setting. Introduction SETUPS Playback Press [STOP C] if you are playing back a disc. Connections STANDBY-ON SOURCE TIMER SET DISPLAY OPEN/CLOSE A ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR 0 1 2 “General Setting” menu will appear. Use [K / L] to select “Playback”, then press [OK]. General Setting SETUP DISC MENU o OK s Recording Playback Display Video Recording Clock Reset All B TITLE RETURN p B j F h i C g + REC 3 DVD REC MODE D.DUBBING AUDIO I CM SKIP SEARCH RAPID PLAY Use [K / L] to select a desired item, then press [OK]. 1 2 3 4 5 6 7 Playback TRACKING -VCR Parental Lock Disc Audio Disc Menu Language Audio Language Subtitle Language Angle Icon Still Mode Function Setup 4 5 Refer to 1 to 7 on pages 72-74 and set the selected item. Editing Submenu will appear. NB552 Basic Setup .@/: Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. When you finish with setting, press [SETUP] to exit. VCR Functions Others Español EN 71 SETUPS Playback (cont’d) 1 Parental Lock (Default: OFF) Some DVD-video feature a parental lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback. This feature prevents your children from viewing inappropriate material. Use [K / L] to select the desired level, then press [OK]. General Setting Playback Display Video Recording Clock Reset All A Use [K / L] to select “Yes”. Use [the Number buttons] to enter a new password except for 4737, then press [OK]. General Setting Playback Display Video Recording Clock Reset All Parental Lock OFF Parental Lock Audio Out 8 [Adult] Disc Menu Language 7 [NC 17] 6 [R] Audio Language Subtitle Language 5 [PG R] Angle Icon 4 [PG 13] 3 [PG] Still Mode 2 [G] 1 [Kid Safe] Note • Parental lock function may not be available to some discs. • With some DVD, it may be difficult to find if they are compatible with parental lock. Be sure to check if the parental lock function operates in the way that you have set. • Record the password in case you forget it. • If there is a DVD in the unit when you set up the parental lock, press [OPEN/CLOSE A] to activate the parental lock level. General Setting Parental Lock OFF Parental Lock Audio Out 8 [Adult] Change Password? Disc Menu Language 7 [NC 17] Audio Language 6 [R] Yes Subtitle Language No 5 [PG R] Angle Icon 4 [PG 13] 3 [PG] Still Mode 2 [G] 1 [Kid Safe] Playback Display Video Recording Clock Reset All Yes Parental Lock OFF Parental Lock Audio Out 8 [Adult] Change Password? DiscInput Menu Language 7Password [NC 17] Audio Language 6 [R] Yes Subtitle Language No 5 [PG R] Angle Icon 4 [PG 13] 3 [PG] Still Mode 2 [G] 1 [Kid Safe] Your setting will be activated. B If a password has not been set yet, proceed to A . If a password has been set already, proceed to B . A password has not been set yet. A password has been set already. • Use [the Number buttons] to enter the current password. General Setting Playback Display Video Recording Clock Reset All Parental Lock OFF Parental Lock Audio Out 8 [Adult] Disc Menu Language 7 [NC 17] Password Input 6 [R] Audio Language Subtitle Language 5 [PG R] Angle Icon 4 [PG 13] 3 [PG] Still Mode 2 [G] 1 [Kid Safe] Your setting will be activated. • If you want to change password, use [K / L] to select “Yes”. Use [the Number buttons] to enter a new password, then press [OK]. General Setting Playback Display Video Recording Clock Reset All General Setting Parental Lock OFF Parental Lock Audio Out 8 [Adult] Change Password? Disc Menu Language 7 [NC 17] Audio Language 6 [R] Yes Subtitle Language No 5 [PG R] Angle Icon 4 [PG 13] 3 [PG] Still Mode 2 [G] 1 [Kid Safe] Playback Display Video Recording Clock Reset All Yes Parental Lock OFF Parental Lock Audio Out 8 [Adult] Change Password? DiscInput Menu Language 7Password [NC 17] Audio Language 6 [R] Yes Subtitle Language No 5 [PG R] Angle Icon 4 [PG 13] 3 [PG] Still Mode 2 [G] 1 [Kid Safe] Your setting will be activated. Note • Press [CLEAR] to erase numbers entered incorrectly. • When you forget the password or you want to clear all settings in “Parental Lock” menu, enter 4,7,3,7 using [the Number buttons] in password input window. Password will be cleared and parental levels will be set to “OFF”. 72 EN 2 Introduction SETUPS Disc Audio Connections Choose the appropriate audio setting for your external device. It will only affect a disc playback. Use [K / L] to select a desired item, then press [OK]. General Setting Basic Setup Playback Display Video Recording Clock Reset All Recording Playback Editing Function Setup VCR Functions Others Español EN 73 SETUPS Playback (cont’d) 3 Disc Menu Language (Default : English) Set the language for disc menu. Use [K / L] to select a setting, then press [OK]. General Setting Playback Display Video Recording Clock Reset All Parental Lock Out Disc Menu Audio Language Disc Menu Language EnglishAudio Language FrenchSubtitle Language Spanish Angle Icon Other Still Mode • Only the languages supported by the disc can be selected. • Audio language setting may not be available to some discs. • You can change or switch off the subtitles on a DVD also from the disc menu if it is available. • Press [CLEAR] or [s] to erase numbers entered incorrectly. 6 Your setting will be activated. 4 Note Audio Language (Default : Original) Angle Icon (Default : ON) Set to “ON” to show the angle icon during the playback. Use [K / L] to select a setting, then press [OK]. Set the audio language. Use [K / L] to select a setting, then press [OK]. General Setting Playback Display Video Recording Clock Reset All General Setting Playback Display Video Recording Clock Reset All Parental Lock Audio Out Audio Language Disc Menu Language Original Audio Language EnglishSubtitle Language FrenchAngle Icon Spanish Still Mode Other Parental Lock Disc Audio Angle IconDisc Menu Language Audio Language ON Subtitle Language OFF Angle Icon Still Mode Your setting will be activated. Your setting will be activated. • When “Original” is selected, the audio language will be in the disc’s default language. 5 7 Still Mode (Default : Auto) Select “Auto” usually. Use [K / L] to select a setting, then press [OK]. Subtitle Language (Default : OFF) General Setting Playback Display Video Recording Clock Reset All Set the subtitle language. Use [K / L] to select a setting, then press [OK]. General Setting Playback Display Video Recording Clock Reset All Parental Lock Audio Out Subtitle Language Disc Menu Language OFF Audio Language EnglishSubtitle Language FrenchAngle Icon Spanish Still Mode Other Your setting will be activated. If “Other” is selected for 3 to using [the Number buttons]. 5 , press 4-digit code Code Input - - - - • When you finish entering the code, press [OK]. Refer to the language code table on page 87. 74 EN Parental Lock Still Mode Audio Out Disc Menu Language Auto Audio Language Field Subtitle Language Frame Angle Icon Still Mode Your setting will be activated. Auto : Optimum resolution setting (“Field” or “Frame”) will be selected. Field : Images in the still mode will be stabilized. Frame : Images in the still mode will be highly defined. Note • Frame is 1 completed video image made up of 2 fields (There are 30 frames per second of NTSC video). Introduction SETUPS Display STANDBY-ON A ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR 0 SETUP DISC MENU 1 When you finish with setting, press [SETUP] to exit. Basic Setup .@/: 4 5 Connections SOURCE TIMER SET DISPLAY OPEN/CLOSE Refer to 1 to 3 on this page and set the selected item. OSD Language (Default : English) Set the language for the on-screen display. Use [K / L] to select a setting, then press [OK]. o General Setting Playback Display Video Recording Clock Reset All B TITLE RETURN p B j F h i C g Your setting will be activated. TRACKING + REC DVD REC MODE D.DUBBING AUDIO I 2 Screen Saver (Default : 10 minutes) Set the time to activate the screen saver function on the TV screen. Use [K / L] to select a setting, then press [OK]. Playback -VCR OSD Language Screen Saver OSD Language FL Dimmer English Français Español Recording OK s CM SKIP SEARCH RAPID PLAY General Setting Your setting will be activated. 3 Press [STOP C] if you are playing back a disc. OSD Language Screen Saver Screen Saver FL Dimmer OFF 5 minutes 10 minutes 15 minutes 30 minutes Function Setup NB552 Editing Playback Display Video Recording Clock Reset All FL Dimmer (Default: Bright) Set the front panel display brightness. Use [K / L] to select a setting, then press [OK]. VCR Functions General Setting Use [K / L] to select “Display”, then press [OK]. Use [K / L] to select a desired item, then press [OK]. Playback Display Video Recording Clock Channel Reset All OSD Language FL DimmerScreen Saver FL Dimmer Auto Bright Dark You can choose one from “Auto”, “Bright” and “Dark”. If “Auto” is selected, the display gets dark when the power is off. Others 1 OSD Language 2 Screen Saver 3 FL Dimmer Español 1 2 3 Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. Selection menu will appear. EN 75 SETUPS Video Press [STOP C] if you are playing back a disc. STANDBY-ON SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR 0 SETUP DISC MENU o OK s 1 2 3 B TITLE Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. Use [K / L] to select “Video”, then press [OK]. Use [K / L] to select a desired item, then press [OK]. 1 Progressive Scan 2 TV Aspect 3 Video Input Submenu will appear. RETURN p B j F h i C g TRACKING -- + VCR REC DVD REC MODE D.DUBBING AUDIO I CM SKIP SEARCH RAPID PLAY NB552 76 EN 4 5 Refer to 1 to 2 on page 77 and set the selected item. • For 3 refer to page 14. When you finish with setting, press [SETUP] to exit. Introduction SETUPS Video (cont’d) 1 Progressive Scan (Default : OFF) 1) Use [K / L] to select “ON“, then press [OK]. General Setting Progressive Scan TVScan Aspect Progressive Video Input ON OFF 2) Use [{ / B] to select “Yes“, then press [OK]. Activate? Yes General Setting Playback Display Video Recording Clock Reset All Progressive Scan TV Aspect TV Aspect Video Input 4:3 Letter Box 4:3 Pan & Scan 16:9 Wide If you have a standard TV: Select “4:3 Letter Box”, so that black bars appear on the top and bottom of the TV screen when playing back a wide-screen picture. Select “4:3 Pan & Scan” for a full height picture with both sides trimmed when playing back wide-screen picture. If you have a widescreen TV: Select “16:9 Wide”. Recording General Setting Playback Activating progressive scan: Display Progressive Check your TV has progressive scan Scan Video TVScan Aspect Progressive and connect with component video cable. Recording Select Video ON Clock OFF Reset All: NOTE If there is no picture or picture is distorted after selecting “Yes”, Wait about 15 seconds for auto recovery. You can select the TV aspect ratio to match the formats of what you are playing back with the unit and your TV screen (4:3 standard or 16:9 widescreen TV). Use [K / L] to select a setting, then press [OK]. Basic Setup Playback Display Video Recording Clock Reset All TV Aspect (Default: 4:3 Letter Box) Connections This unit is compatible with the progressive scan system. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set progressive scan mode to “ON”. 2 No Playback 3) Use [K / L] to select “Yes“ within 15 seconds, then press [OK]. Your setting will be activated. Note Editing • If your TV is compatible with progressive scan (525p / 480p), you are recommended to use the component video cable (commercially available) to connect this unit to the TV. (Refer to “Method 2” on page 15.) If not, use the RCA video cable and set the progressive scan to “OFF” or press and hold [SETUP] for more than 3 seconds during DVD playback. • When selecting “No” or not pressing any buttons on the unit or remote control within 15 seconds at step 3, progressive scan remains to be “OFF” (interlace scan). Function Setup VCR Functions Others Español EN 77 SETUPS Reset All Reset the setting to default. STANDBY-ON SOURCE TIMER SET DISPLAY OPEN/CLOSE A .@/: ABC 1 2 DEF 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR 0 1 2 3 SETUP DISC MENU o OK s Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. “General Setting” menu will appear. Use [K / L] to select “Reset All”, then press [OK]. Select “Yes” using [K / L] , then press [OK]. General Setting Playback Display Video Recording Clock Reset All Reset to factory default? Yes No B TITLE RETURN p B j F h i g C TRACKING -- + VCR REC DVD REC MODE D.DUBBING AUDIO I 4 Select “Yes” again using [K / L] , then press [OK]. General Setting Playback Display Video Recording Clock Reset All ResetAre to factory defauit? you sure? Yes No CM SKIP SEARCH RAPID PLAY Your setting in recording will be initialized. NB552 Note • The settings listed below will remain unchanged even after resetting to the factory default. – OSD language setting – Clock setting – Parental lock setting – Timer programming information 78 EN Playback 3) During playback, press [PAUSE F]. Playback will pause and sound will be muted. Press [VCR] first. Before recording, make sure: • The appropriate external input position (E1/E2) to which your external tuner is connected is selected by pressing [SOURCE]. • There is a cassette tape with a erase-protection tab in the unit. • The desired recording mode is selected in SP (standard playback) or SLP (super long playback) mode by pressing [REC MODE]. Recording mode: Tape speed 4) Press [PLAY B] to resume playback. Note • When a cassette tape without erase-protection tab is inserted, the unit will start playback automatically. • Tracking will be automatically adjusted upon playback. To adjust the tracking manually, press [TRACKING / ]. T120 T160 SP mode 1hour 2hours 2-2/3hours SLP mode 3hours 6hours 8hours • Refer to pages 26-29 for instructions on timer recording. 1) Press [REC I] to begin the recording. To temporarily stop recording or to resume it, press [PAUSE F]. After the unit has been in pause mode for 5 minutes, it will stop automatically to protect the cassette tape and the video head from damage. Playback 6) Press [STOP C / EJECT A] on the front panel of the unit to eject the cassette tape. Recording / playback time T60 Recording 5) Press [STOP C] to stop playback. Type of tape Basic Setup 2) Insert a prerecorded cassette tape. Press [PLAY B] to begin playback. Recording Connections 1) Press [STANDBY-ON y] on the remote control or the front panel of the unit. When you are playing back a cassette tape, turn the TV on and be sure to select the input to which the unit is connected. Press [VCR]. Introduction VCR FUNCTIONS 2) Press [STOP C] when the recording is completed. Editing Accidental erasure prevention To prevent accidental recording on a recorded cassette tape, remove its eraseprotection tab. To record on it later, cover the hole with cellophane tape. erase-protection tab Function Setup VCR Functions Others Español EN 79 VCR FUNCTIONS One-touch Timer Recording (OTR) This feature allows you to set the recording length simply by pressing [REC I] on the remote control. Press [VCR] first. 1) During normal recording, press [REC I] to begin the one-touch timer recording. You can select a fixed recording time by pressing [REC I] repeatedly. (Normal recording) (8:00) (0:30) (1:00) Index Search An index mark will be assigned at the beginning of each recording you make. You may skip to a specific marked point by following the steps below. Press [VCR] first. 1) Press [SEARCH] so that “INDEX SEARCH” menu appears. 2) Using [the Number buttons], enter the number of recordings you wish to skip within 30 seconds. (7:30) INDEX SEARCH 03 When the one-touch timer recording is finished, the unit will turn off automatically. To change the recording length during the one-touch timer recording, press [REC I] repeatedly until the desired length appear. To cancel the one-touch timer recording within the specified time, press [STOP C]. Note • To see the remaining recording time on the TV screen during the one-touch timer recording, press [DISPLAY]. • You cannot pause the one-touch timer recording. • If VCR the one-touch timer recording is completed during DVD playback or recording, the VCR will be in stop mode and the DVD keeps the current mode. • Unlike a timer recording, you can perform the following operations during the one-touch timer recording. - Turning off the power to stop one-touch timer recording. - Using [REC I] or [STOP C]. • When the one-touch timer recording is finished and the power is turned off, the unit will switch to the standby mode automatically if a timer recording has been programmed. Press [TIMER SET] to cancel the standby mode for using the unit continuously. 80 EN 3) Press [E], [D] to start index search. If you want to go in the forward direction, press [ D]. If you want to go in the reverse direction, press [E]. After index search, the VCR will play back the cassette tape automatically. CURRENT PROGRAM Beginning of tape Pro.1 02 Pro.2 01 Pro.3 01 End of tape Pro.4 02 Pro.5 03 INDEX MARK Note • You can make the index mark up to 20. Time Search Introduction VCR FUNCTIONS Other Operations Connections This feature allows you to go to a specific point on a cassette tape by entering the exact amount of time you wish to skip in order to reach the point. Press [VCR] first. 1) Press [SEARCH] repeatedly so that “TIME SEARCH” menu appears. Basic Setup 2) Using [the Number buttons], enter your desired time to skip within 30 seconds. You can set the time up to 9:59. TIME SEARCH 2:50 Recording Playback 3) Press [E], [D] to start time search. If you want to go in the forward direction, press [D]. If you want to go in the reverse direction, press [E]. After time search, the unit will play back the cassette tape automatically. Note Editing • Index search and time search are not available during recording. • Press [STOP C] to stop the search. • If the end of the cassette tape is reached during search, this unit will cancel the search and rewind the cassette tape. Function Setup VCR Functions Others Español EN 81 TROUBLESHOOTING Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. Symptom The power does not turn on. There is no picture. Cannot record a TV program. TV program pictures are distorted. Playback picture is distorted. There is no sound. D V D • V C R Nothing was recorded even though you set the timer setting correctly. Timer recording is not complete or did not start from the beginning. Timer recording is impossible. Remedy • Check that the AC power cord is connected securely. • Check the breaker (in case of power failure). • Press [TIMER SET] to cancel the timer standby mode. • Re-connect the connecting cords securely. • Check if the connecting cords are damaged. • Check the connection to your TV (page 15). • Switch the input selector on your TV (such as to “E1”) so that the signal from the unit appears on the TV screen. • This unit does not have a tuner to receive TV broadcasting. • You must connect this unit to an external tuner to record TV programs (page 13). • Check if all the connections are made correctly. • Keep the device which may cause electrical disturbances, such as a cellular phone, away. • Re-connect all connections securely. • Check if the connecting cord is damaged. • Check the connections to the amplifier input. • Check if the input device setting on the amplifier is correct. • When the unit is in pause mode or in slow-motion playback mode, sound is not output. This is not a malfunction. • When the unit is in fast forward or fast reverse mode, sound is not output. This is not a malfunction. • There was a power failure during recording. • The unit’s internal clock stopped due to a power failure that lasted for more than 30 seconds. Reset the clock (page 21). • The program contains copy protection signals that restricts copying. • The timer setting overlapped with another setting that has priority. • The timer setting overlapped with another setting that has priority (page 29). • Disc space was not enough. appears on the front panel display of this unit. If not, press • Make sure [TIMER SET]. The remote control does not function. • Batteries are weak. • There are obstacles between the remote control and the unit. • The remote control is far from the unit. • There are no batteries in the remote control. • Check if the unit is turned on. • Check if you are pointing the remote control at the recorder and NOT the TV. If you have a plasma TV, it may interfere with the IR signal. Try the remote with the plasma off. If the remote works, you may need to move the unit away from the plasma TV. • Press [DVD] or [VCR], whichever you need. Then, try again. • Press [TIMER SET] to cancel the timer standby mode. The unit does not operate properly. • When static electricity, etc., causes the unit to operate abnormally, unplug the unit and then plug it in again. 82 EN Symptom There is no picture. Connections Basic Setup Recording Playback D V D Editing Function Setup VCR Functions Remedy • If the main menu appears on the TV screen, press [RETURN] to exit. • Check if the progressive scan mode is set correctly according to your TV (page 77). Picture noise appears. • Clean the disc with a cleaning cloth. Playback picture from the external • If the picture output signal from the external devices passes through devices connected to this unit is this unit to get to your TV, the copy protection signal applied to some distorted. DVD could affect the picture quality. Disconnect the playback device in question and connect it directly to your TV. There is no sound. • If you are using DIGITAL AUDIO OUTPUT (COAXIAL) jack, check the setting in “Disc Audio” (page 73). • Clean the disc with a cleaning cloth. Sound is noisy. • Clean the disc with a cleaning cloth. No DTS sound is output. • This unit is not compatible with DTS sound. The disc does not play back. • No disc is inserted. • A blank disc is inserted. • The disc is upside down. Insert the disc with the labeled side facing up. • The disc is not correctly inserted. • The unit cannot play back certain discs (such as a CD-ROM) (page 41). • The region code on the DVD-video does not match the unit (page 41). • Moisture has condensed inside the unit. Remove the disc and leave the unit turned on for about 2 hours until the moisture evaporates (page 4). • If the disc was recorded on another recorder, the unit cannot play back the disc if it was not finalized. Discs recorded on this unit cannot be • If you are using DVD+R, DVD-RW/-R disc, please ensure you finalized the played back on other DVD players. disc after recording (page 37). The disc does not start playback from • Resume playback was activated (page 47). Press [STOP C] twice. the beginning. • You have inserted a disc whose title menu or DVD menu automatically appears on the TV screen when it is first insert. The unit starts playing back the disc • The DVD-video features an auto playback function. automatically. Some functions such as stop, search, • Depending on the disc, you may not be able to do some of the operations. Refer to the manual supplied with the disc. or slow-motion playback cannot be performed. The language for the sound track • The title does not have the multilingual audio tracks. cannot be changed. • The DVD-video prohibits the changing of the language for the sound track. The subtitle language cannot be • Multilingual subtitle are not recorded on the DVD-video. changed or turned off. The angles cannot be changed. • Multi-angles are not recorded on the DVD-video being played back. • The angle-change operation is whenever possible as long as the disc contains a multi-angle portion. Actual change will be performed when the portion has come up. • The DVD-video prohibits changing angles. • Try changing the angle using the DVD-video’s menu. Recording does not stop immediately • It may take a few seconds for the unit to input disc data before after you press [STOP C]. recording stops. The disc tray does not open when you • It may take a few seconds for the disc tray to open after you have recorded or edited a disc. This is because the unit is adding disc data to press [OPEN/CLOSE A]. the disc. Introduction TROUBLESHOOTING Others Español EN 83 TROUBLESHOOTING Symptom “Repairing” appears on the TV screen. Repairing D V D In a case you intend to cancel the repairing process. Do you want to cancel a repairing process ? When selecting “Yes”, the disc may not be usable. Remedy • If there is a power failure or unplugging during recording, finalizing, formatting or editing (even after “Repairing” disappears), a repairing process will begin automatically just after turning the unit on again. It may take several minutes up to about several hours. • If you intend to cancel the repairing process, press [OPEN/CLOSE A] on the front panel, then select “Yes” and press [OK]. After that, press [OPEN/CLOSE A] to take out the disc. The disc canceled during the repairing process MAY NOT work. Yes No Repairing Picture noise appears. V C R 84 • Head cleaning for VCR may be necessary. Refer to “Auto head cleaning” (page 5). • Adjust tracking control for better picture by pressing [TRACKING / ] while you are playing back a cassette tape. The cassette tape does not play back. • No cassette tape is inserted. Recording does not start after you • Make sure the cassette tape has a erase-protection tab when you record press [REC I]. to a cassette tape. If needed, cover the hole with cellophane tape. The remote control does not function. • Check if a cassette tape is in this unit. The motor rotates even when • The motor may rotate for the duration of approximately 5 minutes for efficient operation. This is not a malfunction. playback / recording is stopped. EN Error message Cause Solution • Insert the standardized disc which bear the marks on page 41. • Insert the disc with the labeled side facing up. Region Error — Please eject the disc. — Playback is not authorized in your region. • Playback is not authorized in the region of the DVD-video which you inserted in the unit. • Insert the DVD-video with region codes 1 or ALL. Parental Lock On The current selected parental level prohibits playback. • The current selected parental level prohibits playback. • Check “Parental Lock” setting in “Playback” menu (page 72). Recording Error This program is not allowed to be recorded. • The recording function encountered the copy prohibited program. • You cannot record copy prohibited programs. Recording Error This program is not recordable in +VR mode. • You are trying to record the copy-once program. • You cannot record the copy-once program. Recording Error Can not record on this disc. • You are trying to record onto the disc which is unrecordable, or the disc status is unable to record. • The disc is dirty. • The disc is damaged. • Insert the recordable disc, and ensure the disc status satisfies the recording requirements (page 22). • Clean the disc with a cleaning cloth. • Replace the disc. Recording Error This disc is protected and not recordable. • You are trying to record on to the protected disc which is set in “Disc Edit” menu. • Release the disc protect setting in “Disc Edit” menu (page 36). Recording Error Disc is full. (No area for new recording) • You are trying to record onto the disc which has no space for recording. • Insert the recordable disc with enough recording space. Recording Error You cannot record more than 49 titles on one disc. (The maximum is 49) • You are trying to record onto the disc on which the number of recording titles comes up to the maximum (49). • Delete unnecessary titles (page 57). Recording Error You cannot record more than 254 chapters on one disc. (The maximum is 254) • You are trying to record onto the DVD+RW or DVD-RW on which the number of recording chapters comes up to the maximum (254). • Delete unnecessary chapter marks (pages 60-61). Recording Error You cannot record on this disc as Power Calibration Area is full. • When recordings are performed repeatedly onto an unstable disc, this area may come up to be full. • Every time you insert a disc for recording, the disc’s working area will be taken up. And if you repeat this frequently, it will be used up sooner and you may not be able to record full 49 titles. • Insert a new disc. Recording Error This disc is already finalized. • You are trying to record onto the disc already finalized. • Release the finalizing for this disc (page 37). Recording Error The disc has no recording compatibility. Set “Make Recording Compatible” to “ON” to convert the disc. • You are trying to record onto the disc that had been recorded by other recorders. • Set “Make Recording Compatible” to “ON” to rewrite the menu, after that you will record to disc (page 23). Basic Setup • Unplayable disc is inserted in the unit. • The disc is upside down. Connections Disc Error — Please eject the disc. — Playback feature may not be available on this Disc. Introduction TROUBLESHOOTING Recording Playback Editing Function Setup VCR Functions * If you are still having trouble with the unit after checking “TROUBLESHOOTING”, write down the error code and the error description for calling our help line mentioned on the front page to locate an Authorized Service Center. Others Español EN 85 TROUBLESHOOTING Frequently Asked Questions – Can I record to CD-RW/-R? No, this unit records only DVD. – Can I play back DVD-video that is bought in another country? Possible when the region code of the disc is 1 and All. – Can I connect the unit to my PC? No, you cannot control the unit by PC. – Can I program a timer recording with external tuner? Yes, you can. Select “E1” or “E2” as your recording channel, and leave the external tuner on (pages 13, 2629). – Can I record one channel while watching another channel using an external tuner? It depends on your connection configurations. For more details, please kindly contact at your local store. – Can I change the channels on the external tuner using the remote control of this unit? No. Changing the channels on the external tuner using this unit’s remote control is not possible. You need to use the remote control supplied with the external tuner to change the channels on the external tuner. 86 EN Function Setup VCR Functions Others Code 6467 6559 6553 6547 5350 6564 6554 6566 6660 6560 6550 6555 6565 6557 6558 6561 5165 6567 6569 6568 6658 6653 6647 6666 6651 6654 4861 6655 6661 6665 6664 6657 6669 6757 6764 6772 6855 6861 4971 6961 7054 5655 7161 7267 Editing Language Russian Samoan Sangho Sanskrit Scots Gaelic Serbian Serbo-Croatian Sesotho Setswana Shona Sindhi Singhalese Siswat Slovak Slovenian Somali Spanish Sundanese Swahili Swedish Tagalog Tajik Tamil Tatar Telugu Thai Tibetan Tigrinya Tonga Tsonga Turkish Turkmen Twi Ukrainian Urdu Uzbek Vietnamese Volapuk Welsh Wolof Xhosa Yiddish Yoruba Zulu Playback Code 5467 5565 5560 5547 5551 5557 5347 5566 5647 5669 5760 5765 5757 6469 5771 6460 5761 5767 5861 5847 5868 5860 5866 5957 5953 5965 5958 5966 5955 5964 5961 5960 6047 6051 6061 6149 6164 6159 6247 6265 5247 6258 6266 6367 6459 6461 Recording Language Hungarian Icelandic Indonesian Interlingua Interlingue Inupiak Irish Italian Japanese Javanese Kannada Kashmiri Kazakh Kinyarwanda Kirghiz Kirundi Korean Kurdish Laothian Latin Latvian; Lettish Lingala Lithuanian Macedonian Malagasy Malay Malayalam Maltese Maori Marathi Moldavian Mongolian Nauru Nepali Norwegian Occitan Oriya Oromo (Afan) Panjabi Pashto; Pushto Persian Polish Portuguese Quechua Rhaeto-Romance Romanian Basic Setup Code 4748 4747 4752 6563 4759 4764 5471 4765 4771 4772 4847 5167 4860 5072 4854 4855 4864 4853 5971 4851 5759 4947 7254 4961 5464 4965 5047 6058 5160 5161 5166 5261 5256 5255 5264 5271 5358 5747 5051 5158 5758 5360 5367 5447 5569 5455 Connections Language Abkhazian Afar Afrikaans Albanian Amharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali;Bangla Bhutani Bihari Bislama Breton Bulgarian Burmese Byelorussian Cambodian Catalan Chinese Corsican Croatian Czech Danish Dutch English Esperanto Estonian Faroese Fiji Finnish French Frisian Galician Georgian German Greek Greenlandic Guarani Gujarati Hausa Hebrew Hindi Introduction LANGUAGE CODE Español EN 87 GLOSSARY Analog Audio PBC (playback control) (video CD only) An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also “Digital Audio”. This function enables you to play back interactive software using a menu screen. See also “Video CD”. Aspect Ratio The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the TV screen is almost square); widescreen models are 16:9 (the TV screen is almost twice as wide as it is high). Chapter Just as a book is split up into several chapters, a title on a DVD is usually divided into chapters. See also “Title”. Component Video Output Each signal of luminance (Y) and component (PB/CB, PR/ CR) is independent to output so that you can experience picture color as it is. Also, due to compatibility with progressive video (525p/480p), you can experience higher-density picture than that in interlace (525i/480i). Digital Audio An indirect representation of sound by numbers. During recording, the sound is measured at discrete intervals (44,100 times a second for CD audio) by an analogto-digital converter, generating a stream of numbers. On playback, a digital-to-analog converter generates an analog signal based on these numbers. See also “Sampling Frequency” and “Analog Audio”. Dolby Digital The system to compress digital sound developed by Dolby Laboratories. It offers you sound of stereo(2ch) or multi channel audio. Finalize PCM (pulse code modulation) The most common system of encoding digital audio, found on CD and DAT. Excellent quality, but requires a lot of data compared to formats such as Dolby Digital and MPEG audio. For compatibility with digital audio recorders (CD, MD and DAT) and AV amplifiers with digital inputs, this unit can convert Dolby Digital and MPEG audio to PCM. See also “Digital Audio”. Progressive Scan (525p/480p) A type of display that does not split each frame into fields, and instead scans directly through all the scanlines of each frame in order. Progressive scan provides less flickering and higher image resolution than traditional (525i/480i) TV signals. Refer to page 77 for instructions on selective progressive scan mode. Region Code Regions associate discs and players with particular areas of the world. This unit will only play back discs that have compatible region codes. You can find the region code of your unit by looking on the rear panel. Some discs are compatible with more than one region (or all regions). Sampling Frequency The rate which sound is measured by a specified interval to turn into digital audio data. The numbers of sampling in one second defines as sampling frequency. The higher the rate, the better the sound quality. S-Video Output It delivers independently each signal of color(C) and luminance(Y) to TV as video signals, so that higher-quality picture will be gained. To make DVD, which have been recorded on, possible to play back in DVD players. With this unit, it is possible to finalize DVD+R, DVD-RW, and DVD-R. Title (DVD only) MP3 (MPEG audio layer 3) Audio CD use tracks to divide up the content of a disc. The DVD equivalent is called a chapter. See also “Chapter”. MP3 is a method of compressing files. You can copy MP3 files on CD-RW/-R from the computer and play back the files on this unit. A collection of chapters on DVD. See also “Chapter”. Track Video CD A digital format for store video data in compact disc. 88 EN Introduction SPECIFICATIONS General System Video recording format Sampling frequency Compression format Front 13.5 MHz MPEG 48 kHz Dolby Digital 2V rms (input impedance: more than 22kΩ) Playback 1Vp-p (75Ω) Y: 1Vp-p (75Ω) C: 286mVp-p (75Ω) 2V rms (input impedance: more than 22kΩ) 2V rms (output impedance: more than 1kΩ) Editing Rear +VR (video recording) format DVD+Rewritable, DVD+Recordable DVD-Rewritable, DVD-Recordable (+VR mode only) Recording 1Vp-p (75Ω) 1Vp-p (75Ω) Y: 1Vp-p (75Ω) C: 286mVp-p (75Ω) Y: 1Vp-p (75Ω) C: 286mVp-p (75Ω) Y: 1Vp-p (75Ω) PB/CB: 700mVp-p (75Ω) PR/CR: 700mVp-p (75Ω) VCR Functions 500mVp-p (75Ω) Function Setup Audio recording format Sampling frequency Compression format Terminals Audio input RCA jack x 2 Video input RCA jack x 1 S-video input Mini DIN 4-pin x 1 Audio input RCA jack x 2 Audio output RCA jack x 4 Video input RCA jack x 1 Video output RCA jack x 1 S-video input Mini DIN 4-pin x 1 S-video output Mini DIN 4-pin x 1 Component video output RCA jack x 3 Coaxial digital audio output RCA jack x 1 Basic Setup Recording discs Connections VCR video heads Power requirements Power consumption Dimensions (width x height x depth) Weight Operating temperature Operating humidity Recording Recording format DVD+RW/+R, DVD-RW/-R, DVD-video, CD-DA, Video CD, CD-RW/-R VHS cassette tape Four heads 120V AC +/-10%, 60Hz +/-5% 30W (standby: 3.3W) 17 3/16 x 3 15/16 x 10 1/4 inches (435 x 99.5 x 260mm) 9.5 lbs. ( 4.3kg ) 41°F (5°C) to 104°F (40°C) Less than 80% (no condensation) Others Español Note • The specifications and design of this product are subject to change without notice. EN 89 ESPAÑOL Discos Reproducibles Disco Grabable Este aparato es compatible con la reproducción de los siguientes discos y archivos. Discos reproducibles Logotipos DVD-video DVD+RW DVD+R DVD-RW (Sólo discos en modo de video finalizados) DVD-R (Sólo discos en modo de video finalizados) CD-DA (CD de audio) CD de video Este aparato puede grabar a DVD+RW, DVD+R, DVD-RW y DVD-R. Los discos DVD+R/DVD-R pueden ser grabados sólo una vez. Los discos DVD+RW/DVD-RW pueden ser grabados y borrados muchas veces. En este aparato los discos DVD-RW/-R serán grabados automáticamente en el modo DVD+VR. • Los siguientes discos se recomiendan para obtener una buena calidad de grabación y han sido comprobados como compatibles con este aparato. Sin embargo, según sea la condición del medio el equipo podría no leer el disco correctamente. Verbatim DVD+R 8x, DVD+RW 4x, DVD-R 8x, DVD-RW 2x JVC DVD-RW 4x Maxell DVD+R 4x/8x/16x, DVD-R 8x/16x SONY DVD+R 4x/8x/16x, DVD+RW 4x TDK DVD+R 4x/8x/16x El comportamiento de cualquier otro disco no está garantizado. • Usted puede reproducir discos DVD+RW en la mayoría de los reproductores de DVD sin finalizarlos. Sin embargo, si usted ha añadido o eliminado capítulos, u ocultado capítulos, debe ejecutar “Compatibilizar edic.” antes de poder ver dichos efectos en otros equipos. (Consulte la página 68.) Para reproducir discos que no sean DVD+RW en otros reproductores de DVD, usted necesitará finalizarlos. Logotipo Atributos CD-RW DVD+RW DVD+R DVD-RW DVD-R CD-R Archivos reproducibles Medio Disco de 8 cm / 12 cm, un solo lado, una sola capa Tiempo de grabación máx. aprox. (modo SLP): 360 minutos (4,7 GB) (para 12 cm) 108 minutos (1,4 GB) (para 8 cm) CD-DA CD-RW/-R MP3 es una marca registrada de DVD Format/Logo Licensing Corporation. Códigos de Región El número presente en el interior el globo se refiere a una región del mundo.Este aparato puede reproducir discos DVD que estén rotulados para ALL las regiones o para la región 1. 90 ES Disco no Grabable • Un DVD-RW grabado en un modo distinto de +VR no será grabable en este aparato a menos que usted borre todo el contenido del disco. (Consulte la página 67.) • Un DVD-R grabado en un modo distinto de +VR no será grabable en este aparato. Introduction AUDIO IN L VIDEO IN R parte trasera de su televisor cable coaxial de RF señal de TV DVD/VCR S-VIDEO IN --- AUDIO --- OUT ANT. IN cable de video RCA R S-VIDEO OUT DIGITAL AUDIO OUT DVD AUDIO S-VIDEO COMPONENT VIDEO OUT OUT PB /CB AUDIO OUT L R cable coaxial de RF DVD/VCR S-VIDEO IN --- AUDIO --- OUT Y IN ---VIDEO --- OUT VIDEO OUT Basic Setup cable de audio RCA L IN Connections ej.) IN L L R R IN ---VIDEO --- OUT PR /CR OUT IN parte trasera de este aparato Recording cable de S-video cable de video RCA sintonizador externo cable de audio RCA Playback Editing Function Setup VCR Functions Others Español ES 91 ESPAÑOL Configuración Inicial Cuando usted encienda este aparato por primera vez necesita seguir estos pasos. 1 2 Presione [STANDBY-ON y]. Grabación Básica 1 Encienda el televisor. Seleccione la entrada a la cual está conectado el aparato. * Asegúrese de que el disco sea compatible con este aparato.(Para obtener la lista de discos compatibles consulte la página 22.) Utilice [K / L] para seleccionar su idioma deseado, y luego presione [OK] para establecerlo. Initial Setup OSD Language English Français Español Presione [DVD]. Presione [OPEN/CLOSE A] para abrir la bandeja de discos e insertar su disco con el rótulo aupntando hacia arriba. 2 Para seleccionar un modo de grabación presione [REC MODE]. SP(2Hr) Modo de grabación 3 Presione [OK] para activar “Ajste Manual de Reloj”. Ajuste inicial Ajste Manual de Reloj --- / -- / ---- (---) -- : -- -- 4 HQ (1Hr) SP (2Hr) SPP (2.5Hr) LP (3Hr) EP (4Hr) SLP (6Hr) Utilice [{ / B] para seleccionar un elemento a configurar, y utilice [K / L] para seleccionar el contenido de su preferencia, y luego presione [OK]. Ajuste inicial Ajste Manual de Reloj ENE / 01 / 2007 ( LUN ) 12 : 00 AM 0:58 Calidad del video Tiempo de y el sonido grabación Disco de 8 cm Disco de 12 cm 18 min 60 min Buena 36 min 120 min 45 min 150 min 54 min 180 min 72 min 240 min Deficiente 108 min 360 min 3 Presione [SOURCE] para seleccionar la posición adecuada de la entrada externa (E1/E2) a la cual está conectado su sintonizador externo. Luego seleccione en el sintonizador externo el canal que desea grabar. 4 Presione [REC I] para iniciar la grabación. Para configurar la grabación a un toque con temporizador (OTR)... Esta es una manera sencilla de configurar el tiempo de grabación en bloques de 30 minutos. Presione [REC I] repetidamente hasta que aparezca en la pantalla del televisor la longitud deseada de grabación (30 minutos a 6 horas). Comenzará la grabación a un toque con temporizador. I 0:30 0:30 (grabación normal) 6:00 1:00 5:30 • Para cancelar la grabación a un toque con temporizador dentro del tiempo especificado, presione [STOP C]. 92 ES 5 Para de tener la grabación presione [STOP C]. Introduction ESPAÑOL Grabación con Temporizador A ABC 1 2 DEF 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 TIMER SPACE CLEAR 3 4 5 Empieza Termina Prog. nuevo 2 SETUP DISC MENU Configure una programación del temporizador. Presione [OK]. Presione [TIMER SET] para configurar una programación del temporizador. Aparecerá Fcha ENE/02 E1/E2 E1 o en el pantalla del panel frontal. Empieza --:-GRAB a DVD Termina --:-Modo SP SP OK s Fcha ENE/02 E1/E2 E1 4 B i Empieza 12 : 00AM GRAB a DVD Termina --:-Modo SP SP g REC B p 2 : 00 Fcha ENE/02 E1/E2 E1 DVD Empieza 12 : 00AM GRAB a DVD REC MODE D.DUBBING AUDIO Termina 1 : 00AM Modo SP SP I o B p 1 : 00 Seleccione un medio de grabación (“DVD” o “VCR”). CM SKIP SEARCH RAPID PLAY Empieza 12 : 00AM GRAB a DVD Termina 1 : 00AM Modo SP SP o VCR Functions Fcha ENE/02 E1/E2 E1 B p 1 : 00 Seleccione un modo de grabación. Fcha ENE/02 E1/E2 E1 Empieza 12 : 00AM GRAB a DVD Termina 1 : 00AM Modo SP SP Function Setup + VCR o Seleccione la posición adecuada de la entrada externa (E1/E2) a la cual está conectado su sintonizador externo. C TRACKING -- Editing p h B p 2 : 00 Configure las horas de inicio y finalización. RETURN F o B TITLE j E1/E2 Configure la fecha. 0 1 LUN ENE/01 11:00AM Fcha Playback .@/: 5 Programaci. con Reloj Recording SOURCE TIMER SET DISPLAY OPEN/CLOSE Utilice [K / L] para seleccionar “Prog. nuevo”, y luego presione [OK]. Basic Setup STANDBY-ON 1 2 Presione [TIMER]. Connections Usted puede programar el equipo para que grabe hasta 12 programas, con un mes de anticipación. También hay disponibles grabaciones de programas diarias o semanales. Antes de grabar, asegúrese de que • Cuando llegue el momento en que desea empezar a grabar, conecte el sintonizador externo a ya sea E1 o E2 y configúrelo para dar salida a las señales de audio/video. • No cambie el canal del sintonizador externo cuando esté grabando. Usted no puede mirar un canal y grabar otro al mismo tiempo. • Antes de establecer una programación del temporizador configure el reloj. • Inserte un disco grabable con suficiente espacio libre. o p 1 : 00 NB552 1 Abra la bandeja de discos. OPEN/CLOSE A 2 Inserte un disco. 3 Comience a reproducir. B 4 Detenga la reproducción. Others Reproducción C Español ES 93 MEMO 94 ES MEMO ES 95 LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Certain parts are excluded from this warranty. LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase. LIMITS AND EXCLUSIONS: THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY. This warranty shall not be extended to any other person or transferee. This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or if service was attempted by an unauthorized service center. This limited warranty does not apply to any product not purchased and used in the United States. This warranty only covers failures due to defects in material or workmanship which occur during normal use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or products not supplied by FUNAI CORP., or damage, which results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product, or damage which results from fire, flood, lightning or other acts of God. THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS. FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER. THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER. THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIR COSTS WILL BE CHARGED. IMPORTANT: THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP. ATTENTION: FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE. WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS: To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI CORP. will not reimburse you for any service done by unauthorized service providers without prior written approval. To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please contact us at: FUNAI CORPORATION Customer Service Tel: 1-800-605-8610 http://www.funai-corp.com 19900 Van Ness Avenue, Torrance, CA 90501 Printed in China E9E8AUD 1VMN23495 ★★★★★
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Warning : Invalid xref tableEXIF Metadata provided by EXIF.tools