Makeblock ULTIMATE2 Ultimate2.0 User Manual PDF

Download:
Mirror Download [FCC.gov]
Document ID	3067986
Application ID	eC1PxCa/BzDPUYs9VDBdAQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	150.29kB (1878582 bits)
Date Submitted	2016-07-19 00:00:00
Date Available	2016-07-19 00:00:00
Creation Date	2016-07-19 15:32:45
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2016-07-19 15:37:35
Document Title	PDFѹËõÆ÷
Document Creator	PScript5.dll Version 5.2.2
Document Author:	jack

* Encoder Motor
'9‘ l85RPM
25mm DC Mom
Bracket
' ST
Countersunk
Straw M3 x S
a“ M4x14
Nut M4
0412-220
0824-64
Wane Bearing
Turmable
M4x8
M4x14
’ 0808-24
é) 25mm Motor
~._/" Bratket-7ZT
a 90T
. 72T
_ M4x 16
[h— M4x30
Nut M4
r Pay attendon to diremonl
ofmemolorfnterface. .
<1) L. .L
Encoder Motor
(1) 18SRPM
(1)
(2)
(2)
(1)
(1)
(4)
(2)
(1)
(1)
(1)
(4)
(4)
(4)
Enmder Motor
lBSRPM
3T
Cauntersunk
Screw M 3 x 10
7X9-B
M4x8
M4xl4
M4x22
M4XS
(1)
(1)
(2)
(B)
Encoder Motor 185RPM
M4x8
You have finished ‘10
U! [(19 .usemhh
Assemble mobile phone onto the robot
100 Loluplelvll
MegaPiAcrylk 1
5’? <1
. BalteryHolder (1)
q Plastic Rivet4060 (2)
Mobile Phone
Bracket
0324-88
,_
To correctly assemble the main board onto the acrylic bracket :
I\ please pay attention to the direction ofthe arrows on me brackem
———--—--—--——————-—-——-———————----—--—-——-—I
O MegaPi (1)
o Shleld for RJZS (l)
Encoder/DC Motor (3)
Driver
' Bluemom Module (1)
Meng‘i Acrylic (1)
Bracket
El) Plasa‘c Rivet4100 (3)
one“ on
50
GP o’
M a
nomad-soon
Assemble camera onto the robot
0824428
Nole:The camera and the ball head are notlncluded in this kit.
Assembled Diagram Other Building Forms
ms :Please check whelher me sveul
lqhtened accordlng m the l'rlsirudl'on.
21
Mull" A (86RPM)
SelfrBalanclng Robot Delectl‘ng Robot
3D Capture a
Nulul 8(185RPM)
N'ulnl ( (185RPM)
Vutw A (86RPM) ViSiHE‘sllDJHsLKPDJ (k: r.
El!)\ll_lll_lmll?!l
for detailed assembling inslructions and
3D models of other forms.
”595%
l, Ana: assembly, please skip to page 54
N on" B (IKSRPM) for soflware instrutlion.
Rolling Tank Robou-c Am Catapult Ram
\‘olm ( (185RPM)
App Programming
Further Learning —— Graphical Programming
1. App Download. Not all devices are compatible now. Check :1 Uhflfiljgfikrflljfl on your smart device's browser for confirmation, then download on App 777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777
store or Google play. Introduction to m8lock
Mi‘mjin swam
mBlock is an easyvto-use graphical programming environment based on Scratch 2.0
Open Source Code. It provides a quick way for you to program Arduino projects and
create interesting interactions. It is the ideal software to learn programming, control the
robot. and realize multiple functions from the robot.
4 Download an the
. App Store Google Play
2. Bluetooth Connection. Turn on your robot and the Bluetooth of your smart device; tap on the Robot ID in the search list to pair your smart device with the
robot. When the connection indicator LED is solid on, it means that they have been paired successfully.
The Ultimate 2.0 Robot Kit supports mBlock perfectly, allowing you to program your
robot by simply dragging and dropping blocks.
More Info: MJMJILRPM gal: turn
Required System: Windows/Mac
Advanced Learning -- Arduino Programming (C Language)
Introduction to Arduino
Connection indicator LED
Arduino is an open-source electronics prototyping platform based on flexible,
easy-to-use hardware and software. The Arduino software consists of a development
environment (lDE) and the (ore libraries. The lDE is written in Java and based on the
Processing Development Environment.
More Info: www anlumu u
3, Get to know how to use the Makeblock App with Ultimate 2.0, please visit loam n .iketwlmk (uni uliurmle L ila with r ) Required System: Windows/Mac/Linux
Online Arduino Tutorials
This online tutorial is great for beginners who want to learn about the basics of writing
code while having fun playing with Ultimate 2.0.
Online tutorials: legmmgkghlggkrmlu ti a , rduino~ ra
FAQ
QL Why doesn't the robot work after powered on?The main board suddenly restarts when I try to drive motors.
a. The robot might be running out of battery. Please charge the batteries or use new batteries. (Note: Please use batteries with low internal resistancewhich can
supply enough power for the robot.)
b. Make sure you've downloaded related program or firmware for the robot. Otherwise, it won't be running.
c. Please check if the motors on the robot are wired correctly.
Q2. When I try to turn the robot to the left it turns to the right. Why and how to fix this problem?
a. Vou may need to switch the order of two wires (Port 1, Port 2) to correct the rotation direction.
Q3. Why there is noise after] got the robot tank running?
a. Please check if the driven wheels are correctly installed.
b. Please adjust the bearings of the driven wheel to make sure they are not too tight or too loose.
c. Please make sure encoder disk and the interface of the photoelectric switch are separated from each other.
b. Please try restarting the app or reset the main control board on the robot.
Q5. How to upgrade MegaPi firmware?
a. Visitl . a a . ldtima 9 ~ -wr ~ to download the latest firmware and upgrade it for MegaPi via Micro USE.
Q6. Where can I find the instruction for other buil ng forms?
a. Visit l€!1!1-!I]}1l<.§‘l)lD£L{glmulmflifl’é/ for more building instructions of Ultimate 2.0 robot kit.vt
I Visit lediuilmkrhlmuamfllltmmtfl, laid for more FAQs.
Further Exploration -- Electronic Modules
Ht’ 1) illr' Vinson is able
to measure distance from
3cm to 400cm,
N.» isdesi‘gnedto
measure volume.1t is suitable
for some Sound interactive
projects, such as an vuickcperr
ated switch.
ti. * .gn ell- 'imu, is a
display module with tour digit
mbes that can show data like
speed, time. score, and etc.
N'r'r" I (intuit: «elts ll is a
stainiess steel tube sensor
which is used for measuring
temperature.
mag it will. contains
faurprogrammabie RGB LEDs.
The color of each LED can be
set by editing components of
red, green, and blue.
swim r‘Ji . we»
is abie to demct infrared ray from
animals and humans within 5
meters.
Niv r \ illL!
is normally used to ccntIol
the moving direction.
; See more on Makeblock ptatfonn
WWW"
Further exploration -- More Kits
inliot_Educational Robot Kit:
mBot RangerRobotltitl
lxv PlotterRobotKitl
lMalcer Space kit
«l Music RobotKit_l
lmGl'raffe 3D Printer Kitl
FCC Ultimate 2.0
FCC Information
This device complies with part 15 of the FCC Ruless Operation is subject to the following two conditions:
(1) This device may not cause harmful interference. and
(2) this device must acceptany interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note:This equipmenthas been tested and found to comply with me limits for a Class ii digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, ifnotinstalled and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. if this equipmentdoes
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
e Reorient or relocate the receiving antenna.
e increase the separation between the equipment and receiver.
e Connect the equipmentinto an outlet on a circuit different from thatto which the receiver is connected.
e Consult the dealer or an experienced radio/TV technician tor help.
'This equipment complies with FCC radiation exposure limits set for». for an uncontrolled environment This equipment should be installed and operated with minimum distance 20cm
between the radiator at your body."
'oHS
COMPLIANT
Limited Warranty
This product is warranted against detects in materials and workmanship under normal use by the original purchaser ior 9n days after the date of purchase from an authorized retailer. THERE ARE NO OTHER
EXPRESS WARRANTIES.
This warranty does not cover: (a) damage or failure caused by or attributable to abuse, misuse, failure to follow instructions, improper installation or maintenance, alteration, accident Acts of God (such as
floods orlighiningl, or excess voltage or current; (bl improper or incorrectly performed repairs by noncauflmviled service facilities; is) consumables such as fuses or batteries; to) ordinary wear and tear or
cosmetic damage; (a) transportation, shipping or insurance costs; (ii costs of product removal, installation, set-up service, adjustment or reinstallation; and (9) claims by persons other than the original
purchaser.
Should a problem occur that is covered by this warranty, take the product and the original sales receipt as proor of purchase date to the place oipurchase. The product at the warrantor's option, unless
othenvise provided by law: la) be repaired without charge for parts and labor: lb) be replaced with the same or a comparable product; or (c) a refund of the purchase price will be provided. All replaced parts
and products, and product son which are fund is made, become the property ofthe warrantor. New or reconditioned parts and products may be used in the performance ofwarranty service. Repaired or
replaced parts and products are warranted for the remainder ofthe original warranty period. You will be charged for repair or replacement ofthe product made after the expiration of the warranty period.
ALL IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANT ABILITY AND, IF APPLICABLE, THE IMPLIED WARRANTY OF FITNESS FOR APARTICU LAR PURPOSE, SHALL EXPIRE ON THE
EXPIRATION OF THE STATED WARRANTY PERIODI
EXCEPT AS DESCRIBED ABOVE, THE WARRANTOR SHALL HAVE NO LIABILITY OR RESPONSBILITY TO THE PURCHASER OF THE PRODUCT OR ANY OTHER PERSON OR ENTITY WFTH RESPECT TO ANY
LIABILITY. LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY , INCLUDING, BUT NOT LIMITED TO,
ANY DAMAGES RESULTING FROM INCONVENIENCE AND ANY LOSS OF TIME DATA PROPERTY, REVENUE‘ 0R PROFIT AND ANYINDIRECT, SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF
THE WARRANTOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Warnings
- Adult supervision and assistance are required.
- CHOKING HAZARD —This product contains small parts and functional sharp points on components. Keep away from children under age 3.
- Read and tollow all instructions in the user guide betore using.
- Retain this user guide for future reference
Battery Notes
- Use only fresh batteries of the required size and types Do not mix old and new batteries, different types afbatteries (standard, alkaline, or rechargeable), or rechargeable batteries of different capacities.
- Dispose of batteries promptly and properly. Do not burn or bury them.
.it you do not plan to play with the robot tor an extended period oi time remove the batteries.
Caution
s Do not insert the wires into telecammunicatinn or network socket outlets.
- As an extra precaution checlt this product regularly tor signs ufwear or damage.
- Ensure all wiring conneco‘ons are correct before inserting batteries and switching on the product.
Failure to do so may resultin damage to components and the product.
- Ensure all wires are correcdy cannecmd to the battery terminals and other connectors.” the circuit does notivont, make sure the plastic insulation otrhe wire is notobstmcting the connection to the
(annular.
- When you have finished playing, remove the batteries and switch oii the unitbetore you disconnectthe wires. Do not appty any components or pans to the unit other than those provided with this kit.
- To prevent overheating and damage, do notshort - circuitthe battery terminals and connectors. Do not block orcover the motor or other moving parts.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : jack
Create Date                     : 2016:07:19 15:32:45+08:00
Modify Date                     : 2016:07:19 15:37:35+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2016:07:19 15:37:35+08:00
Producer                        : Acrobat Distiller 11.0 (Windows)
Format                          : application/pdf
Title                           : PDFѹËõÆ÷
Creator                         : jack
Document ID                     : uuid:519123d3-49ac-4854-af8c-9f3b41cebf79
Instance ID                     : uuid:c64fbfa3-5bf0-402f-82da-1e7734832a65
Page Count                      : 7

EXIF Metadata provided by EXIF.tools