Mandolyn Electronic Technology TR430 Remote Control Transmitter User Manual TR430

Mandolyn Electronic Technology Inc. Remote Control Transmitter TR430

Users Manual

ON/OFF LEARNUPM REMOTE CONTROL RECEIVERTR430 remote control transmitterOWNERS MANUAL Congratulations on your purchase of a UPM slim remote control transmitter. This unit is specifically designed to work with UPM brand receivers. Please take the time to read and understand this manual so you can begin to enjoy the convenience this product can offer.FEATURES!433 MHz RF technology!Intelligent code learning!Control up to 4 remote receivers!Ultra-slim design with flush wall-mount bracket!Master On/Off!Transmission range of up to 40 meters in open areaGETTING STARTED battery installation LEARN FUNCTIONTROUBLESHOOTING1212remove the battery cover from the back of the transmitterplace two button cell batteries between terminals observing proper polarity then replace coverTransmitter stops turning receiver on and off. Use the LEARN function to reprogram the receiverorCheck the batteryproblem solutionTECHNICAL SPECIFICATIONSBattery Type: 2 x 1.5V button cellSystem Source: 4,096 code combinationsTransmission Frequency: 433 MHzTransmission Range: up to 40 meters in open area23Repeat and for any additional receivers (available at your local retailer) using available channelsPress LEARN on receiver while simultaneously pressing the desired channel button on the transmitterTR430 Transmitter3the green LED will light up with any key press once the battery is installed correctly131Plug receiver into wall socket4If LEARN completed successfully, the LED on the receiver should light up when ON is pressedbutton descriptions1Turn each receiver On/Off individually by using the channel On/Off keys on the transmitterON/OFF FUNCTION34122MASTER ON/OFF1Turn all receivers On or Off at the same time by using the ALL ON / ALL OFF buttonIf you have more than one receiver set up, you can use the Master On/Off function to simultaneously turn ALL the receivers (of the same house code) On and Off at the same time.Channel 1 ONALL ONChannel 4 ONChannel 3 ONChannel 2 ONChannel 1 OFFALL OFFChannel 4 OFFChannel 3 OFFChannel 2 OFFLED IndicatorThe learn function must be performed to allow the receivers in your system to recognize the transmitter. More than 4,000 code combinations eliminate the possibility of interference by other transmitters.Note that a generic model of receiver is used for illustration here. Please refer to the accompanying owners manual for the operations of your specific receiver.*1NOTICEThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Warning:Changes or modifications made to this equipment not expressly approved by the manufacturer may void the FCC authorization to operate this equipment.

Navigation menu