Maniway Electronics MW1239 Bluetooth Speaker User Manual J081 1239 ETL

Shenzhen Maniway Electronics Limited. Bluetooth Speaker J081 1239 ETL

user manual

Deluxe Music Station2.1CH BLUETOOTH SPEAKERMODEL:MW-1239PLEASE READ BEFORE OPERA TING EQUIPMENTManiway
- This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated ’dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. - The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. ’Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.REFER TO QUALIFIED SERVICE PERSONNEL.IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions - All the safety and operating instructions should be read before this product is operated. 2. Keep these instructions -The safety and operating instructions should be retained for future reference. 3. Heed all warnings - All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow all instructions - All operating and use instructions should be followed. 5. Do not use this apparatus near water - The appliance should not be used near water or moisture - for example, in a wet basement or near a swimming pool, and the like. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacture s instructions. ’ -1-8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer.12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug the apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.15. CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the perating instructions unless you are qualified to do so. 16. Do not install this equipment in a confined or building-in space such as a book case or similar unit, and remain a well ventilation conditions at open site. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc. 17. WARNING˖Please refer the information on exterior bottom enclosure for electrical and safety information before installing or operating the apparatus. WARNING:SHOCK HAZARD. DO NOT OPENAVIS:RISQUE DE CHOC ELECTRIOUE, NE PAS OUVRIR
COMPLIANCE WITH FCC REGULATIONSThis device complies with Part 15 of the FCC Rules. Operationis subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correctthe interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. CAUTION: Changes or modifications not expressly approvedby the party responsible for compliance could void the user’s authority to operate the equipment. -2-18. WARNING˖To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus. 19. WARNING: The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like. 20. WARNING: The mains plug is used as disconnect device, the disconnect device shall remain readily operable.21. No naked flame sources, such as lighted candles, should be placed on the apparatus. 22. Attention should be drawn to environmental aspects of battery disposal. 23. Use of the apparatus in moderate climates.
9-３-51493VO L-VO L+LE D- PR ESETMO DE10(power supply only for charging) (search forward/backwards)10 LED PRESET(ON/OFF the pilot lamp)
Insert the power plug into a convenient Ac wall outlet Insert 2pcs UM-4/AAA type batteries. Pay attention tothe correct polarity (see bottom of battery compartment)!battery. For properConnect 3.5 mm stereo adio cable (included) to an external audio source. If required, use a suitable adapter (not included).-4-
10MW-1239-5-This USB port can supply power 5V/2.1 AListening to FM Radio Setting up the AntennaUnstrap and extend the wire antenna fully for best reception. Do not strip, alter or attach to other antennas. Radio Tuning1. Press MODE Button until FM icon shown on the display to enter the Radio mode. 2. Press the “ ” or “ ” button to automatically search for stations with strong signals, the tuner will stop on the first strong station signal it finds. 3. Press ST./MO. button on the remote control to select the stereo (St ON)/monaural (St OFF) mode.Notes:-Manual tune to select weaker stations that might be by skipped during automatic tuning- If the automatic tuning does not stop on the exact frequency of the station, for example, it stops on 100.8MHz instead of 100.6MHz.Radio Preset StationsThe unit allows you to store up to 50 FM stations to recall at any time.Preset StationsPress and hold the “ ” button until the frequency digitson display begins to scan then release the button, the unitwill auto search from low-end frequency toward high-end frequency and automatically save up all the stations withstrong signals in sequence. It will automatically play the No. 1 station saved once the auto searching is finished.Recalling the Preset StationsPress the button to select the preset station in sequence“ ”
Power of Remote control 3V( 2x 1.5V “AAA”UM-4) BatteriesFM Frequency Range 87.5-108MHz-7-MW-123910Poor sound quality from a ®BluetoothdeviceBluetooth device is almost out of range of theMW-1239Move your Bluetooth devicecloser to the MW-1239Temperature range for use 0- ℃Mute operationis onPress the Mute button to release muteRadio interference. Too close to a radio tower.Remote control isnot functioningproperly.Low battery.Remote Control is not pointedto ward the IR windowPoint the Remote Control toward the unit IR window,usewith in 10 feet of the unit.Move your speakers to see if the interference goes away.You man be able to purchase a shielded cable at your Iocal electronics store.Replace the battery with correct type AAA or UM-4.120V~60Hz3535W

Navigation menu