Maniway Electronics MW1265 Bluetooth Speaker User Manual 1265 3088 ETL

Shenzhen Maniway Electronics Limited. Bluetooth Speaker 1265 3088 ETL

user manual

MODEL:MW-1265PLEASE READ BEFORE OPERATING THIS EQUIPMENT2.1CH Bluetooth SpeakerFor iPod/iPhone/iPadBluetoothManiWay
English1English 2- This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated ’dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. - The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. ’Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.REFER TO QUALIFIED SERVICE PERSONNEL.IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions - All the safety and operating instructions should be read before this product is operated. 2. Keep these instructions -The safety and operating instructions should be retained for future reference. 3. Heed all warnings - All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow all instructions - All operating and use instructions should be followed. 5. Do not use this apparatus near water - The appliance should not be used near water or moisture - for example, in a wet basement or near a swimming pool, and the like. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacture s instructions. ’ 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer.12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug the apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.15. CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the perating instructions unless you are qualified to do so. 16. Do not install this equipment in a confined or building-in space such as a book case or similar unit, and remain a well ventilation conditions at open site. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc. 17. WARNING˖Please refer the information on exterior bottom enclosure for electrical and safety information before installing or operating the apparatus. WARNING:SHOCK HAZARD. DO NOT OPENAVIS:RISQUE DE CHOC ELECTRIOUE, NE PAS OUVRIR COMPLIANCE WITH FCC REGULATIONSThis device complies with Part 15 of the FCC Rules. Operationis subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correctthe interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. CAUTION: Changes or modifications not expressly approvedby the party responsible for compliance could void the user’s authority to operate the equipment. 18. WARNING˖To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus. 19. WARNING: The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like. 20. WARNING: The mains plug is used as disconnect device, the disconnect device shall remain readily operable.21. No naked flame sources, such as lighted candles, should be placed on the apparatus. 22. Attention should be drawn to environmental aspects of battery disposal. 23. Use of the apparatus in moderate climates.
English3English 4REMOTE CONTROLMODEMENU ENTERVIDEOVOL- VOL+61315171921514161820221 Power on Indicator 2 USB port3 Remote sensor4 iPad/iPhone/iPod dock connector 5 MODE button Press to toggle between Bluetooth, iPod/iPhone/iPad and Aux-in modes6 Play/Pause button7 Power On/Standby Button8 <( / Volume-) Button•Press this button once to return to the beginning of current track or previous track. Press and hold this button to adjust volume level down.9 >( / Volume+) Button:•Press this button once to to advance to the next track .Press and hold this button to adjust volume level up.10 RCA Video out Jack 11 Aux-In Jack12 AC Cord 13 Button14 button 15 UP button16 Down button17 Menu button18 ENTER/OK Button 19 REPEAT button 20 Video Out On/Off Button•Toggles the video output on and off, the video out default is set to off.21 Volume- Button22Volume+ ButtonVIDEO OUT AUX-IN10 11 12M5 6 7891342
English5English 610MW-1265Press the MODE button repeatedly, until the power on indicatorchanged to blue to enter the Bluetooth mode.The blue color indicator flashes to show that the unit is in pariring mode.Press the MODE button repeatedly until the power on indicatorchanged to Purple to enter the USB mode.If your device asks for a passkey (depending on the device manufacturers, model, and software version), then enter digits “0000” (four zeros) and press OK. If pairing has been carried out successfully, the Blue colour indicatorstops flashing.alsoduring any modes other than USB mode.Connect 3.5 mm stereo audio cable (included) to an external audio source. If required, use a suitable adapter (not included).Press the MODE button repeatedly until the power on indicatorchanged to cyan to enter the AUX mode.the unit: hardwired, wireless via Bluetooth,iPod(iPhone/iPad)via the iPod dock, or via the USB port.Insert the power plug into a convenient Ac wall outlet Insert 1pc CR2032 button type battery. Pay attention tothe correct polarity (see bottom of battery compartment)!battery. For properHow to change the play modePress the MODE Button during power on, the play mode will be changed cyclically from Bluetooth mode to iPad/iPhone/iPod playback mode, USB mode, and then to AUX-INmode, meanwhile, the Power on indicator light color will be changed from Flashing Blue (Bluetooth mode),Orange (iPad / iPhone / iPod playback mode) , Purple (USB mode), and then to cyan (AUX mode)By pressing & hold the “>/<”buttons on the unit or pressing the VOL+/VOL- buttons on the remote controlyou can adjust the desired volume.standby (by pressing and hold the button) and operatingmode. In standby, the Power on Indicator lights red.Keep the button on the remote control pressed to togglethe unit between standby and operating mode.
- If you play back a series of Podcast videos under the same HOW TO WATCH VIDEOS ON A TVfolder or camera rolls under the same date, pressing the 1.Connect the Video Out Jack of the unit to the composite on the remote will skip forward to the next video video input of your external TV with the composite video until the last one is reached. Pressing the Button will cable (included). Normally, you need to select AV IN of skip backward to the previous video until the first one is your TV to watch the video playing through its reached. composite video input. - If you are playing self-complied videos and used a 3rd2. If you are using the iPod nano, you need to turn on the TV party video conversion program, executing the skip Out option manually from the video setting menu of your forward/backward, Menu and Up/down functions may iPod. cause the video to start play back from the beginning of 3.The video output default is set to local screen of the Apple the video instead of where it left off, this is normal. Videos device when you turn the main unit power on. If you and podcasts downloaded directly from the Apple iTunes change the video output to TV output and then undock it Store will function normally.afterwards, the main unit will revert back to the default local Apple device screen output for the next docked Watching Videos From Your iPhone and iPod touchdevice. 1. In iPod mode, mount the iPhone or iPod touch onto the Flexible Docking Connector of the main unit Watching Videos From Your iPad carefully.1.In iPod mode, carefully mount the iPad onto the Flexible 2. Touch the “Videos” icon on the Apple device to access Docking Connector of the main unit. your video library. 2.Touch the “Videos” icon on the iPad and select the video or 3. Press the Video Button of the remote once to podcast you want to watch. switch video output to your external TV.3.Press the Video Button on the remote once to switch the 4. Touch the video or podcast you want to play.video output to your external TV. 5. The video will begin playing on the external TV 4.Touch the play button on the iPad to play. screen.5.The video will begin playing on the external TV screen. 6. High quality 2.1 channel audio output from your 6.High quality 2.1 channel audio output from your videos videos will be playback through the built-in will be played back through the built-in stereo speakers stereospeakers and subwoofer.and subwoofer. 7. The Play/Pause , , , Repeat, Vol+ and Vol- 7. The Play/Pause , , , Repeat, Vol+ and Vol - Buttons all work in the same way as you watch theButtons all work the same way as if you watched the video video on iPhone/iPod touch screen.on the iPad screen.Note:Note: - Do not press the Play/Pause Button before a video is - Do not press the Play/Pause Button before a video is playing, otherwise it will resume playback of the last playing, otherwise it will resume playback of the last song song being played from the iPod music library instead.being played from the iPod music library instead. - Using the Video On/Off Button, you can be freely- Using the Video On/Off Button, you can be freely switch switch between the iPhone/iPod touch screenbetween the iPad screen (default) and external TV as often (default) and external TV as often as you like.as you like. - When you switch video output, the playing video or - When you switch the video output, the playing video will Youtube video will pause and return to previouspause and return to previous screen. You need to touch screen. You need to touch the play button on the the play button on the iPad to resume playback. iPhone/iPod touch to resume playback.- Videos saved in “Camera Roll” folder under “Albums” in iPad - Videos saved in “Camera Roll” folder under “Albums” in 2 “Photos” function can also be played back on your th iPhone 4S/iPhone 4 and iPod touch 4 generations external TV. When the video starts playing, you can use “Photos” function can also be played back on your the Button on the remote to pause & play ; the external TV. When the video starts playing, you can and Buttons to skip to the beginning & end of the use the Button of the remote to pause & play; the current video and the Video On/Off Button to witch and Buttons to skip to the beginning & end output screen. of the current video and the Video On/Off Button to - If you are watching streaming Youtube videos, you can use switch output screen.the Video Button to freely switch between the iPad screen - The search functions of the and Buttons will not and external TV as often as you like without interruption. function when you are watching streaming Youtube However, the search functions of the and Buttons videos.will not function. English7English 8iPod nano 3rd generation when in the vertical position. WORKING WITH AN iPad / iPhone / iPodVideos may play back on the screen rotated 90 degrees for all other supported iPhone or iPod models.CHARGING YOUR iPad / iPhone / iPod5. High quality 2.1 channel audio output from your videos Even if the main unit is in standby mode, once your iPad,will be played back through the built-in stereo speakers iPhone, iPod touch or iPod nano is docked onto the and subwoofer.Docking Connector, the charging will start automatically 6. After selecting the video you wish to view and it starts until the battery is full.playing, tap the Play/Pause Button of the remote or the main unit to pause or play.LISTENING TO MUSIC ON YOUR iPad / iPhone / iPod7. Press the Button on the remote or “ > ”on the main 1. Press the Power on Button on the main unit or Play/ pause button on remote control to turn the unit on. unit to advance to end of current clip and return to 2. Press MODE Button repeatedly until the power on previous menu.Press and hold the Button on the indicator changed to orange to enter the iPod/iPhone remote only during playback for fast forward search /iPad playback mode. within the clip.3. Dock your iPad, iPod or iPhone through the iPod dock 8. Press the Button on the remote or “< ” button on the connector. main unit to return to the beginning of current clip. Press and hold the button on the remote only during Press “PLAY/PAUSE” button to start the music or playback for fast backward search within the clip.pause the current track. 9. Press the Vol+ and Vol- on the remote to adjust the Press “Vol +” / “Vol – ”button on remote control or press volume output level.and hold the “ > ” / “< ” button on the main unit to 10. Press and hold the“ > ” and “< ” Buttons on the main raise/lower the volume level. Press “>”or ” ” button to unit will also increase and decrease the volume output skip to next track or press “< ” or “ ” button to the level.previous track. 11. If you want to repeat a video clip, press the Repeat Press and hold “ ” or “ ” button on remote control Button on the remote once. To cancel repeat, press the to search during the desired music. Repeat Button two more times. However, there is no To remove your iPod/iPhone, simply stop the playback corresponding repeat icon on your Apple device screen and gently unplug it from the dock connector in video mode to show the repeat status.12. Press the Mute Button on the remote to cut off the Note: audio output from the speakers momentarily. Press The output volume is controlled by the unit setting and again to resume listening.not by iPod volume level.Make sure that your iPad, iPod, iPhone is securely docked Note:into system. Failure to do so may cause damage to your - Do not press the Play/Pause Button before a video is device. playing, otherwise it will resume playback of the last song being played from the iPod music library instead.HOW TO WATCH VIDEOS ON YOUR iPad / iPhone / iPod - The search functions of the and Buttons only nano SCREEN work for videos saved in your Apple device. Streaming 1. Dock your Apple device carefully and securely onto the Youtube videos are not supported.Flexible Docking Connector. - If you play back a series of Podcast videos under the 2. Tap the Power Button on the main unit or the Play/Pause same folder or camera rolls under the same date, Button on the remote control to turn on the unit. Press pressing the on the remote will skip forward to the MODE button repeatedlly until the power on indicator next video until the last one is reached. Pressing the changed to orange to enter the iPod/iPhone/iPad Button will skip backward to the previous video until the playback mode. first one is reached.rd3. Access the “Videos” function of your Apple device and - If you are playing self-complied videos and used a 3 select the video clip you want to play. It will be played party video conversion program, executing the skip back on the LCD screen of your Apple device. forward/backward, Menu and Up/down functions may 4. For the iPad, iPhone and iPod touch, you can cause the video to start play back from the beginning of additionally watch your favorite Youtube videos when the video instead of where it left off, this is normal. you are connected to the internet via Wi-Fi, GSM 2G/3G Videos and podcasts downloaded directly from the or CDMA mobile data networks. Note: Videos will play Apple iTunes Store will function normally.properly on the screen when using an iPad, iPad 2 and
Poor sound quality from a ®BluetoothdeviceBluetooth device is almost out of range of theMW-1265Move your Bluetooth devicecloser to the MW-1265Remote control isnot functioningproperly.Low battery.Remote Control is not pointedto ward the IR windowPoint the Remote Control toward the unit IR window,usewith in 10 feet of the unit.Replace the battery with correct type CR2032Apple device doesnot respond to thespeaker system.Apple device is not installed properly.Remove your Apple device from the dock and check for obstructionon the connectors in the dock andon your Apple device. Then reseat it on the dock.Apple device is locked up.Please make sure that your Apple device is working properlybefore docking into the unit. Please refer to your Apple devicemanual for info on resetting the device.Apple device does not recharge.Apple device is not installedproperly.Remove your Apple device from the dock and check for obstruction on the connectors in the dock and on your Apple device. Then reseat it in the dock.No video output on external TV.TV is not turnedon and not set to AV IN mode.Video cable is broken.Check TV power supply again and turn it on.Then set it to AV IN mode.Change to a good or newcomposite video cable.“Made for iPod”, ”Made for iPhone”, “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for theoperation of this device or its complicance with safety and regulatory standards.Please note that the use of the accessory with iPod,iPhone, iPad may affect wireless performance.iPad, iPhone, iPod, iPod classic, iPod nano and iPodtouch are trademarks of Apple Inc. registered in the U.S and other countries. English9English 10- If you play back a series of Podcast videos under the - While you are playing self-complied videos prepared same folder or camera rolls under the same date, from 3rd party video conversion software, executing pressing the on the remote will skip forward to the skip forward/backward, Menu, Up/down or Video next video until the last one is reached. Pressing the On/Off functions may cause the video to play back from Button will skip backward to the previous video until the beginning instead of where left off, this is normal. the first one is reached. Videos and podcasts downloaded directly from Apple rd- If you are playing self-complied videos and used a 3 iTunes Store will work normally. party video conversion program, executing the skip forward/backward, Menu and Up/down functions may cause the video to start play back from the beginning of the video instead of where it left off, this is normal. Videos and podcasts downloaded directly from the Apple iTunes Store will function normally.Watching Videos on Your iPod nano (except iPod thnano 6 generation)1. In iPod mode, mount the iPod nano onto the Flexible Docking Connector of the main unit carefully.2. Select the “Videos” function on the Apple device to access your video library. 3. Press the Video Button of the remote once to switch video output to your external TV.4. Use the Click Wheel and Center button of the iPod nano to choose the video or podcast you want to play.5. The video will begin playing on the external TV screen.6. High quality 2.1 channel audio output from your videos will be playback through the built-in stereo speakers and subwoofer.7.The Play/Pause , , , Repeat, Vol + and Vol- Buttons all work in the same way as you watch the video on iPod nano screen.Note:- Do not press the Play/Pause Button before a video is playing, otherwise it will resume playback of the last song being played in the iPod music library instead.- Using the Video On/Off Button, you can be freely switch between the iPod nano screen (default) and external TV as often as you like.- If you decide to change back to local screen mode afterwards, press Menu Button on the click wheel of your iPod nano to exit to the video selection screen after pressing the remote Video On/Off Button once (remarks: the video will continue to play on TV). Then choose your desired video manually with the Click Wheel and press the Center Button on the iPod nano to resume playing.- If you play back a series of podcast videos under the thsame folder or camera rolls taken by iPod nano 5 generation under the same date, pressing the on the remote will skip forward to the next video until the last one is reached. Pressing the Button will skip backward to the previous video until the first one is reached.The Purple color power indicator flashes.
Power of Remote control 1x3V type CR2032 Lithium BatteryMW-126510Temperature range for use 0-45℃2.6kgPower supply: 100-240V~50/60Hz 40 WEnglish11

Navigation menu