Maniway Electronics MW1265 Bluetooth Speaker User Manual 1265 3088 ETL
Shenzhen Maniway Electronics Limited. Bluetooth Speaker 1265 3088 ETL
user manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1852459 |
| Application ID | wZZlEoVy64DRbsbpN9DEAg== |
| Document Description | user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 182.05kB (2275655 bits) |
| Date Submitted | 2012-12-05 00:00:00 |
| Date Available | 2012-12-05 00:00:00 |
| Creation Date | 2012-10-24 07:39:23 |
| Producing Software | Corel PDF Engine Version 3.0.0.739 |
| Document Lastmod | 2012-10-24 07:39:23 |
| Document Title | 1265--3088美国ETL说明书 |
| Document Creator | CorelDRAW |
| Document Author: | meigong |
ManiWay 2.1CH Bluetooth Speaker For iPod/iPhone/iPad MODEL:MW-1265 PLEASE READ BEFORE OPERATING THIS EQUIPMENT Bluetooth 1 English Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no userserviceable parts inside. Refer servicing to qualified personnel. WARNING:SHOCK HAZARD. DO NOT OPEN AVIS:RISQUE DE CHOC ELECTRIOUE, NE PAS OUVRIR CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. - This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated ’dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. - The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions - All the safety and operating instructions should be read before this product is operated. 2. Keep these instructions -The safety and operating instructions should be retained for future reference. 3. Heed all warnings - All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow all instructions - All operating and use instructions should be followed. 5. Do not use this apparatus near water - The appliance should not be used near water or moisture - for example, in a wet basement or near a swimming pool, and the like. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacture ’ s instructions. English 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 18. WARNING˖To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus. 19. WARNING: The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like. 20. WARNING: The mains plug is used as disconnect device, the disconnect device shall remain readily operable. 21. No naked flame sources, such as lighted candles, should be placed on the apparatus. 22. Attention should be drawn to environmental aspects of battery disposal. 23. Use of the apparatus in moderate climates. COMPLIANCE WITH FCC REGULATIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 13. Unplug the apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the perating instructions unless you are qualified to do so. 16. Do not install this equipment in a confined or building-in space such as a book case or similar unit, and remain a well ventilation conditions at open site. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc. 17. WARNING˖Please refer the information on exterior bottom enclosure for electrical and safety information before installing or operating the apparatus. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 3 English English REMOTE CONTROL MODE 14 15 16 17 MENU 19 21 VIDEO OUT AUX-IN 10 11 12 13 VOL- 1 Power on Indicator 2 USB port 3 Remote sensor 4 iPad/iPhone/iPod dock connector 5 MODE button Press to toggle between Bluetooth, iPod/iPhone/iPad and Aux-in modes 6 Play/Pause button 7 Power On/Standby Button 8 <( / Volume-) Button •Press this button once to return to the beginning of current track or previous track. Press and hold this button to adjust volume level down. 9 >( / Volume+) Button: •Press this button once to to advance to the next track . Press and hold this button to adjust volume level up. ENTER 18 VIDEO 20 VOL+ 22 10 RCA Video out Jack 11 Aux-In Jack 12 AC Cord 13 Button 14 button 15 UP button 16 Down button 17 Menu button 18 ENTER/OK Button 19 REPEAT button 20 Video Out On/Off Button •Toggles the video output on and off, the video out default is set to off. 21 Volume- Button 22Volume+ Button 5 English English Keep the button on the remote control pressed to toggle the unit between standby and operating mode. By pressing & hold the “>/<”buttons on the unit or pressing the VOL+/VOL- buttons on the remote control you can adjust the desired volume. battery. For proper 10 Insert the power plug into a convenient Ac wall outlet Insert 1pc CR2032 button type battery. Pay attention to the correct polarity (see bottom of battery compartment)! How to change the play mode Press the MODE Button during power on, the play mode will be changed cyclically from Bluetooth mode to iPad/ iPhone/iPod playback mode, USB mode, and then to AUX-IN mode, meanwhile, the Power on indicator light color will be changed from Flashing Blue (Bluetooth mode),Orange (iPad / iPhone / iPod playback mode) , Purple (USB mode), and then to cyan (AUX mode) the unit: hardwired, wireless via Bluetooth,iPod(iPhone/iPad) via the iPod dock, or via the USB port. Press the MODE button repeatedly, until the power on indicator changed to blue to enter the Bluetooth mode.The blue color indicator flashes to show that the unit is in pariring mode. MW-1265 Press the MODE button repeatedly until the power on indicator changed to Purple to enter the USB mode. Connect 3.5 mm stereo audio cable (included) to an external audio source. If required, use a suitable adapter (not included). Press the MODE button repeatedly until the power on indicator changed to cyan to enter the AUX mode. If your device asks for a passkey (depending on the device manufacturers, model, and software version), then enter digits “0000” (four zeros) and press OK. If pairing has been carried out successfully, the Blue colour indicator stops flashing. standby (by pressing and hold the button) and operating mode. In standby, the Power on Indicator lights red. also during any modes other than USB mode. 7 English WORKING WITH AN iPad / iPhone / iPod CHARGING YOUR iPad / iPhone / iPod Even if the main unit is in standby mode, once your iPad, iPhone, iPod touch or iPod nano is docked onto the Docking Connector, the charging will start automatically until the battery is full. LISTENING TO MUSIC ON YOUR iPad / iPhone / iPod 1. Press the Power on Button on the main unit or Play/ pause button on remote control to turn the unit on. 2. Press MODE Button repeatedly until the power on indicator changed to orange to enter the iPod/iPhone /iPad playback mode. 3. Dock your iPad, iPod or iPhone through the iPod dock connector. Press “PLAY/PAUSE” button to start the music or pause the current track. Press “Vol +” / “Vol – ”button on remote control or press and hold the “ > ” / “ < ” button on the main unit to raise/lower the volume level. Press “>”or ” ” button to skip to next track or press “< ” or “ ” button to the previous track. Press and hold “ ” or “ ” button on remote control to search during the desired music. To remove your iPod/iPhone, simply stop the playback and gently unplug it from the dock connector Note: The output volume is controlled by the unit setting and not by iPod volume level. Make sure that your iPad, iPod, iPhone is securely docked into system. Failure to do so may cause damage to your device. HOW TO WATCH VIDEOS ON YOUR iPad / iPhone / iPod nano SCREEN 1. Dock your Apple device carefully and securely onto the Flexible Docking Connector. 2. Tap the Power Button on the main unit or the Play/Pause Button on the remote control to turn on the unit. Press MODE button repeatedlly until the power on indicator changed to orange to enter the iPod/iPhone/iPad playback mode. 3. Access the “Videos” function of your Apple device and select the video clip you want to play. It will be played back on the LCD screen of your Apple device. 4. For the iPad, iPhone and iPod touch, you can additionally watch your favorite Youtube videos when you are connected to the internet via Wi-Fi, GSM 2G/3G or CDMA mobile data networks. Note: Videos will play properly on the screen when using an iPad, iPad 2 and English iPod nano 3rd generation when in the vertical position. Videos may play back on the screen rotated 90 degrees for all other supported iPhone or iPod models. 5. High quality 2.1 channel audio output from your videos will be played back through the built-in stereo speakers and subwoofer. 6. After selecting the video you wish to view and it starts playing, tap the Play/Pause Button of the remote or the main unit to pause or play. 7. Press the Button on the remote or “ > ”on the main unit to advance to end of current clip and return to previous menu.Press and hold the Button on the remote only during playback for fast forward search within the clip. 8. Press the Button on the remote or “< ” button on the main unit to return to the beginning of current clip. Press and hold the button on the remote only during playback for fast backward search within the clip. 9. Press the Vol+ and Vol- on the remote to adjust the volume output level. 10. Press and hold the“ > ” and “< ” Buttons on the main unit will also increase and decrease the volume output level. 11. If you want to repeat a video clip, press the Repeat Button on the remote once. To cancel repeat, press the Repeat Button two more times. However, there is no corresponding repeat icon on your Apple device screen in video mode to show the repeat status. 12. Press the Mute Button on the remote to cut off the audio output from the speakers momentarily. Press again to resume listening. Note: - Do not press the Play/Pause Button before a video is playing, otherwise it will resume playback of the last song being played from the iPod music library instead. - The search functions of the and Buttons only work for videos saved in your Apple device. Streaming Youtube videos are not supported. - If you play back a series of Podcast videos under the same folder or camera rolls under the same date, pressing the on the remote will skip forward to the next video until the last one is reached. Pressing the Button will skip backward to the previous video until the first one is reached. - If you are playing self-complied videos and used a 3rd party video conversion program, executing the skip forward/backward, Menu and Up/down functions may cause the video to start play back from the beginning of the video instead of where it left off, this is normal. Videos and podcasts downloaded directly from the Apple iTunes Store will function normally. HOW TO WATCH VIDEOS ON A TV 1.Connect the Video Out Jack of the unit to the composite video input of your external TV with the composite video cable (included). Normally, you need to select AV IN of your TV to watch the video playing through its composite video input. 2. If you are using the iPod nano, you need to turn on the TV Out option manually from the video setting menu of your iPod. 3.The video output default is set to local screen of the Apple device when you turn the main unit power on. If you change the video output to TV output and then undock it afterwards, the main unit will revert back to the default local Apple device screen output for the next docked device. Watching Videos From Your iPad 1.In iPod mode, carefully mount the iPad onto the Flexible Docking Connector of the main unit. 2.Touch the “Videos” icon on the iPad and select the video or podcast you want to watch. 3.Press the Video Button on the remote once to switch the video output to your external TV. 4.Touch the play button on the iPad to play. 5.The video will begin playing on the external TV screen. 6.High quality 2.1 channel audio output from your videos will be played back through the built-in stereo speakers and subwoofer. 7. The Play/Pause , Repeat, Vol+ and Vol Buttons all work the same way as if you watched the video on the iPad screen. Note: - Do not press the Play/Pause Button before a video is playing, otherwise it will resume playback of the last song being played from the iPod music library instead. - Using the Video On/Off Button, you can be freely switch between the iPad screen (default) and external TV as often as you like. - When you switch the video output, the playing video will pause and return to previous screen. You need to touch the play button on the iPad to resume playback. - Videos saved in “Camera Roll” folder under “Albums” in iPad 2 “Photos” function can also be played back on your external TV. When the video starts playing, you can use the Button on the remote to pause & play ; the and Buttons to skip to the beginning & end of the current video and the Video On/Off Button to witch output screen. - If you are watching streaming Youtube videos, you can use the Video Button to freely switch between the iPad screen and external TV as often as you like without interruption. However, the search functions of the and Buttons will not function. - If you play back a series of Podcast videos under the same folder or camera rolls under the same date, pressing the on the remote will skip forward to the next video until the last one is reached. Pressing the Button will skip backward to the previous video until the first one is reached. - If you are playing self-complied videos and used a 3rd party video conversion program, executing the skip forward/backward, Menu and Up/down functions may cause the video to start play back from the beginning of the video instead of where it left off, this is normal. Videos and podcasts downloaded directly from the Apple iTunes Store will function normally. Watching Videos From Your iPhone and iPod touch 1. In iPod mode, mount the iPhone or iPod touch onto the Flexible Docking Connector of the main unit carefully. 2. Touch the “Videos” icon on the Apple device to access your video library. 3. Press the Video Button of the remote once to switch video output to your external TV. 4. Touch the video or podcast you want to play. 5. The video will begin playing on the external TV screen. 6. High quality 2.1 channel audio output from your videos will be playback through the built-in stereospeakers and subwoofer. 7. The Play/Pause , Repeat, Vol+ and VolButtons all work in the same way as you watch the video on iPhone/iPod touch screen. Note: - Do not press the Play/Pause Button before a video is playing, otherwise it will resume playback of the last song being played from the iPod music library instead. - Using the Video On/Off Button, you can be freely switch between the iPhone/iPod touch screen (default) and external TV as often as you like. - When you switch video output, the playing video or Youtube video will pause and return to previous screen. You need to touch the play button on the iPhone/iPod touch to resume playback. - Videos saved in “Camera Roll” folder under “Albums” in th iPhone 4S/iPhone 4 and iPod touch 4 generations “Photos” function can also be played back on your external TV. When the video starts playing, you can use the Button of the remote to pause & play; the and Buttons to skip to the beginning & end of the current video and the Video On/Off Button to switch output screen. - The search functions of the and Buttons will not function when you are watching streaming Youtube videos. 9 English - If you play back a series of Podcast videos under the same folder or camera rolls under the same date, pressing the on the remote will skip forward to the next video until the last one is reached. Pressing the Button will skip backward to the previous video until the first one is reached. - If you are playing self-complied videos and used a 3rd party video conversion program, executing the skip forward/backward, Menu and Up/down functions may cause the video to start play back from the beginning of the video instead of where it left off, this is normal. Videos and podcasts downloaded directly from the Apple iTunes Store will function normally. Watching Videos on Your iPod nano (except iPod nano 6th generation) 1. In iPod mode, mount the iPod nano onto the Flexible Docking Connector of the main unit carefully. 2. Select the “Videos” function on the Apple device to access your video library. 3. Press the Video Button of the remote once to switch video output to your external TV. 4. Use the Click Wheel and Center button of the iPod nano to choose the video or podcast you want to play. 5. The video will begin playing on the external TV screen. 6. High quality 2.1 channel audio output from your videos will be playback through the built-in stereo speakers and subwoofer. 7.The Play/Pause , Repeat, Vol + and VolButtons all work in the same way as you watch the video on iPod nano screen. Note: - Do not press the Play/Pause Button before a video is playing, otherwise it will resume playback of the last song being played in the iPod music library instead. - Using the Video On/Off Button, you can be freely switch between the iPod nano screen (default) and external TV as often as you like. - If you decide to change back to local screen mode afterwards, press Menu Button on the click wheel of your iPod nano to exit to the video selection screen after pressing the remote Video On/Off Button once (remarks: the video will continue to play on TV). Then choose your desired video manually with the Click Wheel and press the Center Button on the iPod nano to resume playing. - If you play back a series of podcast videos under the same folder or camera rolls taken by iPod nano 5th generation under the same date, pressing the on the remote will skip forward to the next video until the last one is reached. Pressing the Button will skip backward to the previous video until the first one is reached. English - While you are playing self-complied videos prepared from 3rd party video conversion software, executing skip forward/backward, Menu, Up/down or Video On/Off functions may cause the video to play back from the beginning instead of where left off, this is normal. Videos and podcasts downloaded directly from Apple iTunes Store will work normally. Apple device is Apple device does not installed not respond to the properly. speaker system. 10 Remove your Apple device from the dock and check for obstruction on the connectors in the dock and on your Apple device. Then reseat it on the dock. Please make sure that your Apple device is Apple device is working properly locked up. before docking into the unit. Please refer to your Apple device manual for info on resetting the device. Remove your Apple device Apple device does not recharge. Apple device is from the dock and check for obstruction on the connectors not installed in the dock and on your Apple properly. device. Then reseat it in the dock. No video output on external TV. TV is not turned Check TV power supply on and not set again and turn it on. to AV IN mode. Then set it to AV IN mode. Video cable is broken. The Purple color power indicator flashes. Poor sound quality from a Bluetooth® device Remote control is not functioning properly. Bluetooth device Move your Bluetooth device is almost out of closer to the MW-1265 range of the MW-1265 Low battery. Replace the battery with correct type CR2032 Remote Control Point the Remote Control to is not pointed ward the unit IR window,use to ward the IR with in 10 feet of the unit. window Change to a good or new composite video cable. “Made for iPod”, ”Made for iPhone”, “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its complicance with safety and regulatory standards. Please note that the use of the accessory with iPod, iPhone, iPad may affect wireless performance. iPad, iPhone, iPod, iPod classic, iPod nano and iPod touch are trademarks of Apple Inc. registered in the U.S and other countries. 11 English MW-1265 Power supply: Power of Remote control 100-240V~50/60Hz 40 W 1x3V type CR2032 Lithium Battery Temperature range for use 2.6kg 0-45℃ 10
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 7 Create Date : D:20121024073923 Modify Date : D:20121024073923 Producer : Corel PDF Engine Version 3.0.0.739 Author : meigong Creator : CorelDRAW Title : 1265--3088美国ETL说明书EXIF Metadata provided by EXIF.tools