BAS 342G PS INSTRUCTIONS
2016-10-15
: Manual Bas-342G Ps Instructions BAS-342G PS_INSTRUCTIONS BROTHER
Open the PDF directly: View PDF
Page Count: 86
- COVER
- SAFETY INSTRUCTIONS
- CONTENTS
- 1. NAMES OF MAJOR PARTS
- 2. SPECIFICATIONS
- 3. TABLE PROCESSING DIAGRAM
- 4. INSTALLATION
- 4-1. Removing the machine head fixing bolts [1]
- 4-2. Installing the control box [2]
- 4-3. Installing the oil pan and support lever base
- 4-4. Installing the machine head
- 4-5. Tilting back and returning the machine head
- 4-6. Installing the gas spring
- 4-7. Installing the operation panel [3]
- 4-8. Installing the solenoid valve assembly
- 4-9. Connecting the air tubes [4]
- 4-10. Installing the air hose [5]
- 4-11. Adjusting the air pressure [6]
- 4-12. Adjusting the speed controller [7]
- 4-13. Connecting the cords [8]
- 4-14. Connecting the ground wire [9]
- 4-15. Securing the cords and air tubes [10]
- 4-16. Installing the eye guard [11]
- 4-17. Installing the cotton stand [12]
- 4-18. Lubrication [13]
- 4-19. Connecting the power cord [14]
- 4-20. Checking the safety switch [15]
- 5. PREPARATION BEFORE SEWING
- 6. USING THE OPERATION PANEL (BASIC OPERATIONS)
- 7. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
- 7-1. List of advanced functions
- 7-2. Setting memory switches
- 7-3. List of memory switch settings
- 7-4. Using the lower thread counter
- 7-5. Using the production counter
- 7-6. Setting the split number
- 7-7. Using user programs
- 7-8. Using cycle programs
- 7-9. Direct selection (combination table)
- 7-10. X and Y parallel movement of sewing pattern
- 7-11. Clearing memory data (reinitialization)
- 8. USING CF CARDS
- 9. SEWING
- 10. CLEANING
- 11. STANDARD ADJUSTMENTS
- 11-1. Adjusting the thread take-up spring
- 11-2. Adjusting arm thread guide R
- 11-3. Adjusting the needle bar height
- 11-4. Adjusting the needle bar lift amount
- 11-5. Adjusting the driver needle guard
- 11-6. Adjusting the needle clearance
- 11-7. Adjusting the inner rotary hook and hook stopper overlap
- 11-8. Adjusting the rotary hook lubrication amount
- 11-9. Adjusting the position of the movable knife
- 11-10. Replacing the movable and fixed knives
- 11-11. Adjusting the thread wiper
- 11-12. Presser foot installation position
- 11-13. Changing the intermittent stroke
- 11-14. Adjusting the work clamp lift amount
- 11-15. Adjusting the air pressure
- 12. TABLE OF ERROR CODES
- 13. TROUBLESHOOTING
- 14. 7-SEGMENT DISPLAY
- END COVER