Fractal Audio Axe Fx Ii Owners Manual 304 User
2017-08-31
User Manual: Manual Fractal Audio Axe-Fx-Ii-Owners-Manual-304 Fractal_Audio_Axe-Fx-II-Owners-Manual-304 manuals AxeFx
Open the PDF directly: View PDF
Page Count: 184 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- Foreword
- Table of Contents
- What’s New
- 1 Introduction
- 2 Overview
- 3 Connections
- 3.1 Setting Levels
- 3.2 The PEDAL Jack
- 3.3 System Parameters
- 3.4 Connection Diagrams
- 3.4.1 Axe-Fx II into Self-Powered Full-Range Speakers
- 3.4.2 Axe-Fx II into Studio Monitors
- 3.4.3 Axe-Fx II with Power Amp and Guitar Speakers
- 3.4.4 Axe-Fx II Effects Loop
- 3.4.5 Axe-Fx II Digital Audio Interconnection
- 3.4.6 Axe-Fx II Four Cable Method (“4CM”)
- 3.4.7 Direct to FOH plus Real Amps on Stage
- 3.4.8 Axe-Fx II as Effects Processor Only (with Guitar Amps)
- 3.4.9 Axe-Fx II as a Computer Audio Interface
- 3.4.10 Axe-Fx II and MFC-101
- 3.4.11 Axe-Fx II: One Possible “Big Rig”
- 4 Basic Operation and Editing
- 5 Effects Guide
- 5.1 Amplifier [AMP]
- 5.2 Cabinet [CAB]
- 5.3 Chorus [CHO]
- 5.4 Compressor [CMP]
- 5.5 Crossover [XVR]
- 5.6 Delay [DLY]
- 5.7 Drive [DRV]
- 5.8 Effects Loop [FXL]
- 5.9 Enhancer [ENH]
- 5.10 Feedback Send [SND] & Return [RTN]
- 5.11 Filter [FLT]
- 5.12 Flanger [FLG]
- 5.13 Formant [FRM]
- 5.14 Gate/Expander [GTE]
- 5.15 Graphic Equalizer [GEQ]
- 5.16 Looper [LPR]
- 5.17 Megatap Delay [MGT]
- 5.18 Mixer [MIX]
- 5.19 Multiband Compressor [MBC]
- 5.20 Multi Delay [MTD]
- 5.21 Tremolo/Panner [PAN]
- 5.22 Parametric EQ [PEQ]
- 5.23 Phaser [PHA]
- 5.24 Pitch Shifter [PIT]
- 5.25 Quad Chorus [QCH]
- 5.26 Resonator [RES]
- 5.27 Reverb [REV]
- 5.28 Ring Modulator [RNG]
- 5.29 Rotary Speaker [ROT]
- 5.30 Synth [SYN]
- 5.31 Vocoder [VOC]
- 5.32 Volume/Pan [VOL]
- 5.33 Wahwah [WAH]
- 5.34 Input Noise Gate
- 5.35 Output Mixer
- 5.36 Common Mix Parameters
- 6 Global Blocks
- 7 Modifiers & Controllers
- 8 Global Parameters
- 9 Input/Output Parameters
- 10 Utilities
- 11 Tuner
- 12 Tempo
- 13 Backing Up and Restoring
- 14 Firmware Updates
- 15 Troubleshooting
- 16 Appendix
- 16.1 Shortcuts Overview
- 16.2 60-Second Edit Guide
- 16.3 Understanding Preset Size Limits
- 16.4 Signal Flow, Global, and I/O Parameters
- 16.5 LFO Waveforms, Duty, and Phase
- 16.6 Tempo Cross Reference
- 16.7 Mono and Stereo
- 16.8 Mixology
- 16.9 Humbuster™ Technology
- 16.10 Setting up a Wah Pedal
- 16.11 Setting Up Spillover
- 16.12 Using Send and Return
- 16.13 Loading User Cab IRs
- 16.14 Glossary & Resources
- 16.15 Axe-Fx II Bank & Preset Numbers Table
- 16.16 Factory Default Settings
- 17 Specifications
- Warranty