Pdf Fg01576 System Design Guide User Manual

Pdf Fg01528 Im-Net System-Design-Guide pdf_FG01528_IM-Net_system-design-guide pdf_FG01528_IM-Net_system-design-guide FG01528 products

Pdf Fg01407 Rfg System-Design-Guide pdf_FG01407_RFG_system-design-guide pdf_FG01407_RFG_system-design-guide FG01407 products

Pdf Fg01403 Contact-Tt System-Design-Guide pdf_FG01403_Contact-TT_system-design-guide pdf_FG01403_Contact-TT_system-design-guide FG01403 products

Pdf Fg01343 Ht-Msu System-Design-Guide pdf_FG01343_HT-MSU_system-design-guide pdf_FG01343_HT-MSU_system-design-guide FG01343 products

Pdf Fg01341 Iremote-Ts System-Design-Guide pdf_FG01341_IREMOTE-TS_system-design-guide pdf_FG01341_IREMOTE-TS_system-design-guide FG01341 products

2017-06-28

User Manual: Manual Pdf Fg01576 System-Design-Guide pdf_FG01576_system-design-guide FG01576 products

Open the PDF directly: View PDF PDF.
Page Count: 24

DownloadPdf Fg01576 System-Design-Guide User Manual
Open PDF In BrowserView PDF
N

I

L

E

ICS

S

A

U

D

I

O

C

O

R

P

O

R

A

T

I

O

N

SYSTEM DESIGN GUIDE
V O L U M E
I

N

C

L

U

D

2
E

S :

• I N T E G R AT I N G A N I L E S H T- M S U W I T H A N I N T E L L I C O N T R O L I C S S Y S T E M

• D E S I G N I N G S Y S T E M S W I T H A N H T- M S U A S S I G N E D T O A Z O N E

• D E S I G N I N G S Y S T E M S W I T H T W O T O F O U R H O M E T H E AT E R S Y S T E M S

• D E S I G N I N G S Y S T E M S W I T H O N E O R M O R E H O M E T H E AT E R Z O N E
A N D A N I R O N LY C O N T R O L L E D H O M E T H E AT E R R O O M

• I N T E L L I F I L E ® 3 P R O G R A M M I N G O V E RV I E W

S Y S T E M

D E S I G N

G U I D E

INTRODUCTION
The following information simplifies and optimizes the design and implementation of a Home Theater System into an
IntelliControl ICS system. In addition, you’ll learn how to integrate up to four home theaters into a single system using multiple
HT-MSUs (Home Theater Main System Units).

TABLE OF CONTENTS
How to Use this System Design Guide -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 2
Overview: Designing and Integrating Multiple Home Theater Systems with an IntelliControl ICS
Distributed Audio/Video System -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 3
Overview: Niles Home Theater Products -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 5
Overview: HT-MSU-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 5
Application: Controlling an ICS MultiZone A/V System & a Home Theater System Using an HT-MSU -- 7
Application: Assigning the HT-MSU to a Zone of an IntelliControl ICS Modular MultiZone Receiver -- - 11
Application: Creating a system Design Incorporating Two to Four Home Theater System
(Multiple HT-MSU’s) - -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --15
Application: Integrating One or More HT-MSU Controlled Theaters and an IR only Controlled Theater
with an IntelliControl ICS System -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -19
IntelliFile ®3 Programming Steps -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 23

(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION

S Y S T E M

D E S I G N

G U I D E

HOW TO USE THIS SYSTEM DESIGN GUIDE
Each chapter in the System Design Guide is broken up into sections to make comprehension easier. Each section contains
specific information that is presented with graphic examples to further aid in understanding. Below is a description of what
information is contained within each section.
The Application
section provides you
with detailed info for
a specific application
(see below)

Do This First
Installation instructions on
what you need to know
before you begin

The Cable Schedule
section lists all cables
used in cabling diagrams
(sometimes shown on
application page)

The Cable Diagram
section shows all
connection points
with color coded line
connections

Customer Benefits
What this application
does for your customer

What Does this
Application Do?
Description of application

Key Considerations
Important information that
you need to consider when
planning your design

Installer Benefits
What the application
does for you

Installation Requirements
Specific installation details
that you need to know

Critical Knowledge
These are “must know”
details that you need
to know

(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION

2

S Y S T E M

D E S I G N

G U I D E

OVERVIEW: DESIGNING AND INTEGRATING MULTIPLE
HOME THEATER SYSTEMS WITH AN INTELLICONTROL ICS
DISTRIBUTED AUDIO/VIDEO SYSTEM
WHAT IS A HOME THEATER SYSTEM AND HOW
DOES IT INTEGRATE WITH AN INTELLICONTROL
ICS DISTRIBUTED AUDIO/VIDEO SYSTEM?
In today’s electronic age, a home theater system is an

HOME THEATER
DEDICATED SOURCES

DISPLAY DEVICE

TiVo®

Plasma/
LCD

ambiguous term. Typically, a home theater system is a
gathering of sources, to be shown and used with a display
device (flat panel TVs are popular). Sources may be as

Blu-ray
Player

simple as a DVD or Blu-ray player and a cable or satellite
tuner. In the typical home theater system, there is a surround

SURROUND RECEIVER

sound receiver to take advantage of the multi-speaker
theatrical soundtracks available from these sources.
Consumers have embraced and accepted the concept of
home theater systems and wish to have multiple theater
systems in the house such as the Family Room and the
Master Bedroom. Some of these theater rooms are also
doing double-duty by allowing access to sources that would
be available in a multi-zone distributed audio/video system.
Additionally, the client wants to have these theater systems
easy to operate even if the products used in the theater
systems are different. Ideally they would like to learn only
one remote or have one remote to seamlessly operate these
independent systems. This Advanced System Design Guide

Figure 1
SHARED (OR SHARING SOURCES) – When a home theater
system is connected to the GXR2 Modular MultiZone
Receiver via the phantom zone connections and source
audio is sent one source at a time to the home theater
receiver via the card cascade outputs. This requires the
home theater system to switch its input every time a different
source is requested from ICS. It also increases the number
of inputs required and cabling by a factor of six maximum.
This allows one home theater to share sources with ICS
without sacrificing a real zone (see Figure 2). This is covered
in the first application on pages 9-10 of this design guide.

will illustrate the different ways an IntelliControl ICS dealer

SHARED SOURCES

can integrate single or multiple home theater systems with

DEDICATED SOURCES

the IntelliControl ICS distributed audio/video system.

TiVo®

DEFINITION OF TERMS
HOME THEATER SYSTEM – A room with at least a display
device and/or a home theater receiver where the sound that

Blu-ray
Player

comes through the speakers is provided by the home theater
receiver or display device. (Sometimes also referred to as a
standalone theater, see Figure 1) This home theater can be
connected to the GXR2 by using the Phantom Theater Zone
connections (CAT-5 from HT-MSU to GXR2 or HT IR In and
HT Sync if using an original IntelliControl) and can share the

Plasma/
LCD

sources installed in the GXR2.
IntelliControl® ICS
MULTIZONE
HOME THEATER

Figure 2 Sharing Sources
3

(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION

DISPLAY DEVICE

S Y S T E M

D E S I G N

G U I D E

ZONE SOURCE UTILIZATION

HOUSE ZONE – House zones come in three forms:

GLOBAL SOURCES

1) Audio Only Zone: A zone that has the sound provided by
TiVo®

the GXR2 Modular MultiZone Receiver.
2) Audio/Video Zone: Any zone on an IntelliControl ICS

IntelliControl® ICS
MULTIZONE

Blu-ray
Player

System that is getting an audio feed from a GXR2 and
video feed from a VS-6. In addition, an IRG is used to
automate power and source input of the display device in
that zone. No local source or home theater receiver is
involved in an Audio/Video Zone
3) Theater Zone: A room with at least a display device and

Plasma/
LCD

one or more local sources. Local theater zone components
must be HT-MSU controlled. Additionally, a theater zone
may or may not include a home theater receiver. A theater
zone takes up a zone on a GXR2 chassis, making every

THEATER ZONE 5

DISPLAY DEVICE

GXR2 source available for the theater zone.
Figure 3 Zone Source Utilization
ZONE SOURCE UTILIZATION – When a theater zone is
connected to the GXR2 Modular MultiZone Receiver via a
fixed pre-amp output, the audio from that zone can be sent
to the home theater receiver over one pair of cables
connected to a single input. The speaker outputs of the
theater zones of the GXR2 are unused (see Figure 3). This
is detailed in the application on pages 11-14.
THEATER ZONE CONTROL – Is defined as anything that

IR-ONLY THEATER ROOM – Is defined as a room with a
local display and sources that are not connected to the
IntelliControl ICS system, yet are to be controlled by
the

iRemoteTS

handset

via

direct

line-of-sight

IR.

Typically this is a guest bedroom and the clients wish to
include the operation of the local TV with the iRemoteTS and
only have to learn one remote. This is detailed in the
application on pages 19-22.

must be done to provide local audio and control in a Theater
Zone through a TV and/or a home theater receiver. This
includes but is not limited to volume, mute, power, input,
surround mode, etc. (Up to four Theater Zones can be
configured on an IntelliControl ICS system).

(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION

4

S Y S T E M

D E S I G N

G U I D E

OVERVIEW: NILES HOME THEATER PRODUCTS
Below are the available Niles Home Theater products and the ZigBee RF nodes they are able to function as. As you can see,
some devices are dedicated as End-Points (i.e., iRemoteTS). Other devices can be configured to operate as a Master RF
Base, or an RF Repeater Base (i.e., HT-MSU). Unlike the iRemote, the iRemoteTS DOES NOT contain a ZigBee RF radio in its
charging base.

Product

1
2

Model

Stock No.

Description

iRemoteTS

FG01341

Wireless Color
Touchscreen

HT-MSU

FG01343

Home Theater Main
System Unit

Master RF
Base

RF Repeater Base

End-Point

X

X1

X2

The HT-MSU functions as a Master RF Base when used in a stand-alone application (no connections to GXR2).
Build 140 or greater of IntelliFile 3 allows the HT-MSU to function as an RF Repeater Base.

OVERVIEW: HT-MSU
POWER SYNC PORTS

12V DC POWER CONNECTION

These ports sense the power
status of the home theater
components so the correct on/off
commands are always issued

A 12V DC UL-Listed external power
supply is included

RF ANTENNA
CONNECTION
The HT-MSU comes with a
10-foot antenna extension so
the supplied RF antenna can
be installed in the location
where it works best

IR AND RS-232
SERIAL OUTPUT PORTS
The HT-MSU provides the flexibility to
control home theater components
via IR and RS-232 control

ASSIGNABLE 12V OUTPUTS
Integrate electronic components
and outboard automation devices to
satisfy all your customization needs

GLOBAL IR OUTPUT
This output provides all of the IR
codes that the Main System Unit
generates, plus any codes that
come in through the Infrared Input.
Commonly used with Niles IRB1
High-Output IR Flashers to control all
components with only one flasher

ASSIGNABLE RELAYS
Contact closures/relays can be
programmed to automate lights,
curtains, screen lifts and other devices

PC CONFIGURATION/
EXPANSION

INFRARED INPUT
Provides a connection for an IR sensor
that enables IR control of the Main
System Unit and also acts as an IR
pass-through for connected sources

5

LOW-PROFILE, EASY INSTALL DESIGN
Two-way mounting ears enable the MSU to be
mounted vertically or horizontally

(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION

This connection is used to
configure the HT-MSU with
a laptop computer and for
expanding the system design

S Y S T E M

D E S I G N

G U I D E

OVERVIEW: HT-MSU
ONE TOUCH TO ENTERTAINMENT® OFFERS
SIMPLE CONTROL OF COMPLEX SYSTEMS

IR CONTROL

The Niles HT-MSU Home Theater Main System Unit simplifies

sources local to the theater system.

The HT-MSU has 8 IR output ports allowing for control of 8

entertainment by allowing one-touch control of home theater
components. Ordinary home theater system controllers

RS-232 CONTROL

require users to turn on (and off) multiple components,

The HT-MSU has 8 RS-232 output ports allowing for control

resulting in a confusing situation of hunting down the fugitive

of 8 sources local to the theater system.

component that is “off,” when it really should be “on.”

ZIGBEE RADIO
The HT-MSU eliminates the confusion by shifting control to

Hide Away Your Equipment – The HT-MSU’s ZigBee RF

an interface box. The remote initiates commands to the HT-

wireless technology can transmit through walls and ceilings.

MSU, so whether you’re playing a DVD or watching a program

This opens up a whole new world of installation possibilities.

recorded on your DVR, the HT-MSU provides one-touch

Hang a flat panel TV on your living room wall and install all

access to all your entertainment.

the other equipment in a closet, in another room, or even in
the garage. The living room keeps its clean look and you get

ASSIGNABLE RELAYS AND 12V OUTPUTS

all the fun and excitement that a home theater delivers.

Three dry contact closures and three 12V DC trigger outputs
can be independently programmed to give installers greater

INTELLICONTROL ICS INTEGRATION

control of mechanical devices or voltage-triggered power

Configuration is accomplished quickly and easily using

strips and dispersion controlled home theater loudspeakers.

IntelliFile3 software program. A wizard guides the installer,
step-by-step, through the configuration process. The

INTELLIGENT INTEGRATION WITH MULTI-ZONE
SYSTEMS

software program archives customer and IR files for use with
future installations.

The HT-MSU includes control ports that allow it to “share”
sources with whole-house distributed audio systems. The
power state of these “shared” sources can be completely
managed so that sources are always powered-on when they
need to be and powered-off when both whole-house and
home theater systems are turned off.

PROGRAM MEMORY PROTECTION
The entire system profile is stored in non-volatile memory
within the HT-MSU. This safeguards against accidental loss
of the configuration programming for the entire life of the
product.

(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION

6

S Y S T E M

D E S I G N

G U I D E

APPLICATION: CONTROLLING AN ICS MULTIZONE A/V
SYSTEM & HOME THEATER USING AN HT-MSU
DO THIS FIRST

Review Designing a Niles ZigBee RF Network in the IntelliControl ICS System Design Guide, Vol. 1
(See System Support Material at: www.intellicontrol.com/ICS/downloads.php)

WHAT DOES THIS APPLICATION DO?
This application covers the use of an iRemoteTS as the primary controller of a home theater system and an IntelliControl ICS
audio/video system. In this scenario, some or all of the sources connected to the IntelliControl ICS system are shared with the
home theater receiver, the home theater system does not take up a zone on the IntelliControl ICS system, and the iRemoteTS is
used in a single room which also contains the home theater.

Key Considerations
When the iRemoteTS is configured with
an HT-MSU and an IntelliControl ICS
system, the sources can be shared
between the audio distribution system
and the home theater (e.g., an
IM-iCARD2 card can be shared between
the GXR2 and the home theater
receiver). In this configuration, metadata
will be displayed on the home theater
side of the remote when these sources
are selected. Additionally, the home
theater can have dedicated sources that
are not accessible from the audio/video
distribution system (e.g., a DVR that
is only connected to the home theater
receiver).
You should think of the iRemoteTS
as two separate remotes in one. The
“House” side of the remote is accessed
by pressing House and provides similar
functionality with metadata to a Contact
or Contact-TT. The “Theater” side of the
remote is accessed by pressing Theater
and includes the following:
• Up to 12 Master Keys which can be
used to access dedicated sources of a
home theater, sources shared with the
IntelliControl ICS AV system, or can be
used for tasks (e.g., a Master Key label
“LiveTV” and a second one labeled
“List” would access a single DVR).
• Each Master Key can access up to
four touchscreen pages (transport,
numeric, extra, and favorites) which are
configured in the IntelliFile3 software.

INSTALLATION REQUIREMENTS
• IntelliFile3 Capture Station and latest
version of IntelliFile3 software
7

Customer Benefits
• The favorites page can have up to
20 channel icons or generic labelled
buttons. Each favorite page shows five
favorites.
• When a Master Key for a source that
is also shared with the IntelliControl
ICS AV system is selected, metadata
screens are automatically included
in the pages for that Master Key (if
available from the source).
When accessing the “House” side of
the iRemoteTS, the hard button cursor
keys can be programmed for use with
devices connected to an IM-Audio card
but cannot be used for controlling Niles
audio sources, such as a TM-Sirius card.
For Niles audio sources, the navigation
soft keys on the touchscreen are used.

CRITICAL KNOWLEDGE
1. An HT-MSU is required in order to
have metadata screens displayed on
the “Theater” side of the remote.
2. The iRemoteTS must be within range
of a Niles ZigBee network in all areas
where the customer desires control.
(Please read the How to Design
and Implement a Niles ZigBee
RF Network from System Design
Guide, Vol. 1 section thoroughly to
understand how to deploy a ZigBee
network in order to provide coverage
in all desired areas).
3. The ZigBee transmitter in the
HT-MSU is disabled when connected
to the GXR2, unless configured
to be an RF Repeater Base using
IntelliFile3.

(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION

Your customer will have full access to
all sources whether they are part of
the home theater or the audio/video
distribution system from an ergonomic
and easy to use wireless remote.
Additionally, channel surfing is further
simplified through icon-based favorite
channels. Finally, these controls can be
used to control any zone in the house
as long as it is within range of a Niles
ZigBee network.

Installation Benefits
This application allows positive control of
a home theater system via IR or RS-232,
and the sharing of sources to the home
theater that are available to the house
audio distribution system. All sources
with metadata can be easily controlled
via the color touchscreen.

S Y S T E M

D E S I G N

G U I D E

CABLE SCHEDULE
Shared source connections to Master GXR2, VS-6, and Home
Theater Receiver
QTY
CABLE
SIGNAL
FROM

TO
Master GXR2/
IM-AUDIO #1

Room connections (needed for each area that accesses the
audio/video sources)
QTY
CABLE
SIGNAL
FROM
TO
Master GXR2/Zone
1
Speaker
Audio
Speakers
1 Speaker
Master GXR2/
1
CAT-5
Network
Contact
Network Switch

1

Stereo RCA

Audio

Parent's TiVo

1

Component

Video

Parent's TiVo

VS-6/Input 1

1

Mono RCA

Digital Audio

Parent's TiVo

HT Receiver/
Video 2 Coax
Dig. In

1

CAT-5

Video

VS-6/Zone 1

C5-HDDAWM Balun

1

Flasher

IR

Master GXR2/IM-AUDIO #1

Parent's TiVo

1

Component

Video

C5-HDDAWM
Balun

Plasma TV

1

Stereo RCA

Audio

Kid's TiVo

Master GXR2/
IM-AUDIO #2

1

3.5mm

Sync

CS-12V

IRG

1

Component

Video

Kid's TiVo

VS-6/Input #2

1

CAT-5

Network

VS-6/Network
Switch

IRG

1

Mono RCA

Digital Audio

Kid's TiVo

1

Flasher

IR

IRG

Plasma TV

1

Flasher

IR

Master GXR2/IM-AUDIO #2

1

Stereo RCA

Audio

Blu-ray Player (shared)

1

Component

Video

Blu-ray Player (shared)

HT Receiver/
Video 1 Coax
Dig. In
Kid's TiVo
Master GXR2/
IM-AUDIO #3
VS-6/Input #3

HT Receiver/DVD
Digital Audio Blu-ray Player (shared)
Coax Dig. In
Blu-ray Player
IR
Master GXR2/IM-AUDIO #3
(shared)

1

Mono RCA

1

Flasher

1

RG-6

RF

Sat. Radio Antenna

1

RG-6

RF

Sat. Radio Antenna

1

30 pin

Audio+Data

SmartDock2

1

CAT-5

Network

Master GXR2/
Network Switch

1

Component

Video

VS-6/Cascade Out #1

1

Component

Video

VS-6/Cascade Out #2

1

Component

Video

VS-6/Cascade Out #3

1

Stereo RCA

Audio

1

Stereo RCA

Audio

1

Stereo RCA

Audio

Master GXR2/TM-XM
Out #1
Master GXR2/TM-XM
Out #2
Master GXR2/
IM-iCARD2 Out

Master GXR2/
TM-XM #1
Master GXR2/
TM-XM #2
Master GXR2/
IM-iCARD2
VS-6/Out to
Master GXR2
HT Receiver/
Component
Video 1 In
HT Receiver/
Component
Video 2 In
HT Receiver/
Component
DVD In
HT Receiver/
Aux 3 In
HT Receiver/
Aux 2 In
HT Receiver/
Aux 1 In

Dedicated source connections to Home Theater Receiver
QTY

CABLE

SIGNAL

1

HDMI

Video

1

Mono RCA

Digital Audio

1

Mono RCA

Digital Audio

FROM

TO

Blu-ray Player
(dedicated)
Blu-ray Player
(dedicated)

HT Receiver/
HDMI 1 In
HT Receiver/TV
Coax Dig. In
HT Receiver/CD
Coax Dig. In

CD Player

ZigBee network connections
1

CAT-5

Network

Master GXR2/
Network Switch

RFG (Master RF Base)

1

12V Power
Supply

Power

Wall AC Outlet

RFG (RF Repeater Base)

HT-MSU connections
Master GXR2/
Network Switch
LS-1 (sensing Toslink
output on dedicated
Blu-ray player
Blu-ray Player
(dedicated)

1

CAT-5

Network

HT-MSU/Expansion

1

3.5 mm

12V DC

HT-MSU/Src #1
Sync

1

Flasher

IR

1

Flasher

IR

1

RS-232

Control

1

RS-232

Control

HT-MSU/Receiver
RS-232 Out

HT Receiver RS-232
Control In

1

3.5mm

12V DC

HT-MSU/
Trigger #1 Out

AC-3 (Switch outlet for
CD player)

1

3.5mm

12V DC

HT-MSU/
Trigger #2 Out

Projection Screen
Trigger In

HT-MSU/Src #1
IR Out
HT-MSU/Src #2
IR Out
HT-MSU/TV
RS-232 Out

CD Player
Projector RS-232
Control In

Other Home Theater Receiver connections
HT Receiver/
Projector HDMI In
HDMI Out
HT Receiver/
1 Component
Video
Projector Component In
Component Out
HT Receiver/
1
Mono RCA
Audio
Subwoofer LFE In
Sub Out
HT Receiver/L/C/R/
L/C/R/SL/SR/RL/RR
1
Speaker
Audio
SL/SR/RL/RR
Speakers
Room connections (needed for each area that accesses audio
sources only)
Master GXR2/
1
Speaker
Audio
Speakers
Zone 1 Speaker
Master GXR2/
1
CAT-5
Network
Contact
Network Switch
1

HDMI

Video

SEE NEXT PAGE
FOR DIAGRAM

(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION

8

S Y S T E M

D E S I G N

G U I D E

S Y S T E M

D E S I G N

G U I D E

APPLICATION: CONTROLLING AN ICS MULTIZONE A/V SYSTEM & HOME THEATER USING AN HT-MSU
(Example shown is a 6 zone audio system with 6 zones of video distribution with an automated home
theater system)

9

(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION

(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION

10

S Y S T E M

D E S I G N

G U I D E

APPLICATION: ASSIGNING THE HT-MSU TO A ZONE OF
AN INTELLICONTROL ICS MULTIZONE A/V SYSTEM
DO THIS FIRST

Review Designing a Niles RF Network in the IntelliControl ICS System Design Guide, Vol. 1

WHAT DOES THIS APPLICATION DO?
This application allows you to assign the Niles HT-MSU to a zone on an IntelliControl ICS Modular MultiZone Receiver, and gain
the convenience of having the audio for all of the sources in the GXR2 Modular MultiZone Receiver provided over one set of RCA
cables utilizing the GXR2 zone pre-amp output and connected to one input of the surround receiver for that theater zone.

Key Considerations

Customer Benefits

Installation Benefits

Assigning an HT-MSU to a zone means
the home theater receiver is now the
amplifier for that zone of the GXR2
Modular MultiZone Receiver the HT-MSU
is assigned to. The speaker outputs
(GXR2) of the zone the HT-MSU is
assigned to are no longer adjustable
from a keypad or remote. Any keypad or
remote assigned to control the HT-MSU
theater zone will control the volume
control of the surround receiver for that
Theater Zone

Your customer will now have the zone
conveniences available to them such as
Party Mode and Global Off from any User
interface on the IntelliControl ICS system.
Additionally, your customers will have the
convenience of seamless control of the
Theater Zone and its local sources as
if it was just another zone on the GXR2
Modular MultiZone Receiver.

The system designer and installer gain
the convenience of having the audio
for all of the sources in the GXR2
Modular MultiZone Receiver provided
over one set of RCA cables utilizing
the GXR2 zone pre-amp output and
connected to one input of the surround
receiver for that theater zone. If the
home theater receiver for that zone is
located in the zone (not centrally located)
the installer can use one set of RCA
connections and/or extend one set of
RCA connections using a pair of Niles
CAT-5 audio baluns. The installer/system
designer can choose to use any input on
the surround receiver for all of the audio
from the GXR2 sources. No longer do
you have to split the sources and use
many inputs on the surround receiver.

CRITICAL KNOWLEDGE
1. Once you assign an HT-MSU to
a zone of the IntelliControl ICS
Modular MultiZone Receiver,
that zone’s pre-amp outputs
automatically become fixed
2. The speaker outputs of a theater
zone are no longer controllable from
any user interface (In effect, you
cannot use them any longer)

INSTALLATION REQUIREMENTS
• IntelliFile3 Capture Station and
the latest version of IntelliFile3
software. See page 23 for IntelliFile3
programming instructions.
• A CAT-5 connection from the
IntelliControl ICS Modular MultiZone
Receiver to the Niles HT-MSU
• An established RF network on the
IntelliControl ICS Modular MultiZone
Receiver in which the iRemoteTS
can communicate

11

3. Any user interface assigned to
control the theater zone will control
the volume on the surround receiver
for that zone
4. The theater zone will now show up
in order, on the zone listing for any
user interface (keypad or remote)
5. The ZigBee radio of the HT-MSU
connected to an IntelliControl ICS
Modular MultiZone Receiver can
only be a repeater or turned off
and must communicate through
a Master RF base assigned to the
IntelliControl ICS Modular MultiZone
Receiver.

(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION

S Y S T E M

D E S I G N

G U I D E

CABLE SCHEDULE
Shared source connections to Master GXR2, VS-6, and Home
Theater Receiver
QTY
CABLE
SIGNAL
FROM

TO
Master GXR2/
IM-AUDIO #1

Room connections (needed for each area that accesses the
audio/video sources)
QTY
CABLE
SIGNAL
FROM
TO
Master GXR2/Zone
1
Speaker
Audio
Speakers
1 Speaker
Master GXR2/
1
CAT-5
Network
Contact
Network Switch

1

Stereo RCA

Audio

Parent's TiVo

1

Component

Video

Parent's TiVo

VS-6/Input 1

1

Mono RCA

Digital Audio

Parent's TiVo

HT Receiver/
Video 2 Coax
Dig. In

1

CAT-5

Video

VS-6/Zone 1

C5-HDDAWM Balun

1

Flasher

IR

Master GXR2/IM-AUDIO #1

Parent's TiVo

1

Component

Video

C5-HDDAWM
Balun

Plasma TV

1

Stereo RCA

Audio

Kid's TiVo

Master GXR2/
IM-AUDIO #2

1

3.5mm

Sync

CS-12V

IRG

1

Component

Video

Kid's TiVo

VS-6/Input #2

1

CAT-5

Network

VS-6/Network
Switch

IRG

1

Mono RCA

Digital Audio

1

Flasher

IR

IRG

Plasma TV

1

Flasher

1

Stereo RCA

1

Component

1

Mono RCA

1

Flasher

IR

Master GXR2/IM-AUDIO #3

1

RG-6

RF

Sat. Radio Antenna

1

RG-6

RF

Sat. Radio Antenna

1

30 pin

Audio+Data

SmartDock2

1

CAT-5

Network

Master GXR2/
Network Switch

1

Component

Video

VS-6/Cascade Out #1

1

Component

Video

VS-6/Cascade Out #2

1

Component

Video

VS-6/Cascade Out #3

1

Stereo RCA

Audio

1

Stereo RCA

Audio

1

Stereo RCA

Audio

HT Receiver/
Video 1 Coax
Dig. In
IR
Master GXR2/IM-AUDIO #2
Kid's TiVo
Master GXR2/
Audio
Blu-ray Player (shared)
IM-AUDIO #3
Video
Blu-ray Player (shared)
VS-6/Input #3
HT Receiver/DVD
Digital Audio Blu-ray Player (shared)
Coax Dig. In
Kid's TiVo

Master GXR2/TM-XM
Out #1
Master GXR2/TM-XM
Out #2
Master GXR2/
IM-iCARD2 Out

Blu-ray Player
(shared)
Master GXR2/
TM-XM #1
Master GXR2/
TM-XM #2
Master GXR2/
IM-iCARD2
VS-6/Out to
Master GXR2
HT Receiver/
Component
Video 1 In
HT Receiver/
Component
Video 2 In
HT Receiver/
Component
DVD In
HT Receiver/
Aux 3 In
HT Receiver/
Aux 2 In
HT Receiver/
Aux 1 In

Dedicated source connections to Home Theater Receiver
QTY

CABLE

SIGNAL

1

HDMI

Video

1

Mono RCA

Digital Audio

1

Mono RCA

Digital Audio

FROM

TO

Blu-ray Player
(dedicated)
Blu-ray Player
(dedicated)

HT Receiver/
HDMI 1 In
HT Receiver/TV
Coax Dig. In
HT Receiver/CD
Coax Dig. In

CD Player

ZigBee network connections
Master GXR2/
Network Switch
Theater Zone HT-MSU connections
1

CAT-5

Network

1

CAT-5

Network

HT-MSU/Expansion

1

3.5 mm

12V DC

HT-MSU/Src #1
Sync

1

Flasher

IR

1

Flasher

IR

1

Flasher

IR

IR Out

Plasma

1

Flasher

IR

HT-MSU/Receiver
IR Out

HT Receiver (dedicated)

HT-MSU/Src #1
IR Out
HT-MSU/Src #2
IR Out

RFG (Master RF Base)
Master GXR2/
Network Switch
LS-1 (sensing Toslink
output on dedicated
Blu-ray player
Blu-ray Player
(dedicated)
CD Player

Other Home Theater Receiver connections

1

HDMI

Video

HT Receiver/
HDMI Out

Plasma/LCD HDMI In

1

Component

Video

HT Receiver/
Component Out

Plasma/LCD
Component In

HT Receiver/
Subwoofer LFE In
Sub Out
HT Receiver/L/C/R/
L/C/R/SL/SR/RL/RR
1
Speaker
Audio
SL/SR/RL/RR
Speakers
Room connections (needed for each area that accesses audio
sources only)
Master GXR2/
1
Speaker
Audio
Speakers
Zone 1 Speaker
Master GXR2/
1
CAT-5
Network
Contact
Network Switch
1

Mono RCA

Audio

SEE NEXT PAGE
FOR DIAGRAM

(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION

12

S Y S T E M

D E S I G N

G U I D E

S Y S T E M

D E S I G N

G U I D E

APPLICATION: EXAMPLE OF A SIX ZONE AUDIO/VIDEO SYSTEM WITH
ONE AUTOMATED HOME THEATER ZONE

13

(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION

(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION

14

S Y S T E M

D E S I G N

G U I D E

APPLICATION: CREATING A SYSTEM DESIGN INCORPORATING
TWO TO FOUR HOME THEATERS (MULTIPLE HT-MSU’S)
DO THIS FIRST

Review Designing a Niles ZigBee RF Network in the IntelliControl ICS System Design Guide, Vol. 1
(See System Support Material at: www.intellicontrol.com/ICS/downloads.php)

WHAT DOES THIS APPLICATION DO?
This application covers the use of an iRemoteTS as the primary home theater controller for two to four home theater zones. This
application also details how a Niles HT-MSU is assigned to a zone of an IntelliControl ICS system. In this scenario, some or all of
the sources connected to the IntelliControl ICS system are used with the zone’s home theater receiver.

Key Considerations
A Theater Zone is an IntelliControl ICS
system zone where a separate home
theater receiver is used to amplify that
zone’s speakers. When an iRemoteTS
is configured with multiple HT-MSU’s,
sources can be utilized for both the
GXR2 and the home theater receiver.
For example, an IM-iCARD2 can be
shared between the GXR2 and the home
theater receiver. In this configuration,
metadata is displayed on the home
theater side of the iRemoteTS when
selected. Additionally, the home theater
zone can have dedicated sources that
are not accessible from the GXR2 (e.g., a
DVR that is only connected to the home
theater receiver). It is helpful to think of
the iRemoteTS as two separate remotes
in one. The “House” side of the remote
is accessed by pressing House and
provides similar functionality to a Contact
or Contact-TT, including metadata. The
“Theater” side of the remote is accessed
by pressing Theater and includes the
following:
• Up to 12 Master Keys that access
dedicated home theater sources and
IntelliControl ICS system sources.
Master Keys can also be used to initiate
tasks. For example, a Master Key labeled
“LiveTV” and a second one labeled “List”
would access a single DVR.

INSTALLATION REQUIREMENTS
• IntelliFile3 Capture Station and latest
version of IntelliFile3 software. See
page 23 for IntelliFile®3 programming
instructions.
15

Customer Benefits
• Master Keys can access up to
four touchscreen pages: transport,
numeric, extra, and favorites. They are
configured in the IntelliFile3 software.
• The favorites page contains up to
20 channel icons or generic labeled
buttons, along with five favorites.
When a Master Key is selected for
use as a source from the IntelliControl
ICS system, metadata screens are
automatically included in the pages for
that Master Key (if available from the
source). When accessing the “House”
side of the iRemoteTS, the hard button
cursor keys can be programmed for
use with devices connected to an
IM-Audio card. They cannot be used
for controlling IntelliControl ICS audio
sources such as a TM-Sirius® card. For
IntelliControl ICS audio sources, the
navigation soft keys on the touchscreen
are used.

Using an easy-to-operate wireless
remote, your customer gains full access
to all sources–whether they are part
of an audio and/or video zone or a
home theater zone. Channel surfing
is also simplified through icon-based
favorite channels. A single iRemoteTS
can be configured to control up to four
theater zones. Any of these zones can
be controlled by multiple iRemoteTS’s.
Finally, these controls can be used to
operate any zone in the house, as long
as it is within range of its respective Niles
ZigBee network.

Installation Benefits
This application allows positive control
of up to four home theater zones via
IR or RS-232. It also allows the usage
of IntelliControl ICS System sources
with the home theater. All sources with
metadata can be easily controlled via the
color touchscreen.

CRITICAL KNOWLEDGE
1. An HT-MSU is required in order to
have metadata screens displayed on
the “Theater” side of the remote.
2. The iRemoteTS must be within range
of a Niles ZigBee network wherever
the customer wants control. Review
Designing a Niles ZigBee RF Network
in the IntelliControl ICS System Design
Guide, Vol. 1.

(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION

3. The ZigBee transmitter in the
HT-MSU can be configured as an
RF Repeater Base using IntelliFile3
software.
4. For each theater zone, the pre-amp
audio outputs of the GXR2 cascade
all sources to the home theater
receiver over a single connection.

S Y S T E M

D E S I G N

G U I D E

CABLE SCHEDULE
Dedicated Sources to ICS System
QTY
CABLE
SIGNAL

FROM

TO

Theater Zones (needed for each Theater Zone)
QTY
CABLE
SIGNAL
FROM
Stereo
Master GXR2/Zone 3
1
Audio
Audio
Line Out
Master GXR2/Network
1
CAT-5
Network
Switch

1

Stereo Audio

Audio

Parent’s Tivo

Master GXR2/IM-Audio # 1

1

Component

Video

Parent’s Tivo

VS-6/Input 1

1

Flasher

IR

Master GXR2/
IM-Audio # 1

Parent’s Tivo

1

CAT-5

Video

1

Stereo Audio

Audio

Kid’s Tivo

Master GXR2/IM-Audio # 2

1

Component

Video

1

Component

Video

Kid’s Tivo

VS-6/Input 1

1

CAT-5

Network

1

Flasher

IR

Master GXR2/
IM-Audio # 2

Kid’s Tivo

1

Stereo Audio

Audio

Blu-ray

Master GXR2/IM-Audio # 3

1

Component

Video

Blu-ray
VS-6/Input 1
Master GXR2/
1
Flasher
IR
Blu-ray
IM-Audio # 3
Sat Radio
1
RG6
RF
Master GXR2/TM-XM # 4
Antenna
Sat Radio
1
RG6
RF
Master GXR2/TM-XM # 5
Antenna
1
30 Pin
Audio+Data
SmartDock2
Master GXR2/IM-iCARD2 # 6
Room Connections (needed for each area that accesses Audio/Video Sources
Master GXR2/
1
Speaker
Audio
Zone 1 Speakers
Zone 1 Speaker
Master GXR2/
1
CAT-5
Network
Contact
Network Switch
VS-6/Zone 1
1
CAT-5
Video
C5-HDDAWM Balun
Output
C5-HDDAWM
1
Component
Video
Plasma TV
Balun
1

3.5mm

Sync

CS-12V

IRG
IRG
Plasma TV

1

CAT-5

Network

VS-6/ Network
Switch

1

Flasher

IR

IRG

MasterVS-6/Zone 3
Media Room/C5HDDAWM
Master GXR2/ Network
Switch

TO
Media Room/Receiver In
Media Room/HTMSU
Media Room/C5HDDAWM
Media Room/
Receiver In
Contact

Media Room/Theater Zone - #3
1

Speaker

Audio

1

Component

1

COAX

Video
Digital
Audio

1

Component

Video

1

MF-1

IR

1
1

MF-1
MF-1

IR
IR

HT Receiver L/C/R/RL/RR
Blu-ray Player

HT Receiver/DVD In

Blu-ray Player

HT Receiver/DVD In

HT Receiver/ Monitor
Out
HT-MSU/
Receiver IR Out
HT-MSU/ TV IR Out
HT-MSU/ SRC 1 IR Out

Speakers

Plasma TV
HT- Receiver
Plasma TV
Blu-ray Player

ZigBee Network Connections
1

CAT-5

Network

Master GXR2/
Network switch

RFG/ (Master)

1

12V Power
Supply

Power

Wall Outlet

RFG (Repeater Base)

SEE NEXT PAGE
FOR DIAGRAM

(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION

16

S Y S T E M

D E S I G N

G U I D E

S Y S T E M

D E S I G N

G U I D E

APPLICATION: EXAMPLE OF A SIX ZONE AUDIO SYSTEM WITH UP TO
FOUR AUTOMATED HOME THEATER SYSTEMS

17

(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION

(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION

18

S Y S T E M

D E S I G N

G U I D E

APPLICATION: INTEGRATING ONE OR MORE HT-MSU
CONTROLLED THEATERS AND AN IR ONLY CONTROLLED
THEATER WITH AN INTELLICONTROL ICS SYSTEM
DO THIS FIRST

Review Controlling a Stand-Alone Home Theater Via IR in the IntelliControl ICS System Design Guide, Vol.1

WHAT DOES THIS APPLICATION DO?
This application allows you to integrate infrared control in the iRemoteTS of rooms that have dedicated sources and a display
device and no integration with the IntelliControl ICS System. A primary example of this application is a Guest Bedroom that has
no speakers (and is not a zone) of the GXR2 Modular MultiZone Receiver, but has its own TV and cable box

Key Considerations

Customer Benefits

Installation Benefits

A home theater zone is defined as a
zone of the IntelliControl ICS System
where a separate home theater receiver
is used to amplify the zone’s speakers.
When the iRemoteTS is configured with
multiple HT-MSU’s, sources can be
utilized for both the GXR2 and the home
theater receiver. For example, an
IM-iCARD2 can be shared between the
two. Each iRemoteTS can be configured
to control up to four theater zones.

Give your customers one remote that
will control any zone on an GXR2
Modular MultiZone Receiver and control
the components in a room that has no
connection with an GXR2 at all.

This application allows control of a home
theater system via IR, which creates
opportunities to upgrade systems
already wired for IR control.

CRITICAL KNOWLEDGE
1. The IR sensor of the IR repeater
system should be placed high
enough in order to avoid blockage
of the IR commands by someone
walking in between the iRemoteTS
and the IR sensor, but low enough
as to not be severely off axis from
the customer’s preferred seating
location.

INSTALLATION REQUIREMENTS
• IntelliFile3 Capture Station and
the latest version of IntelliFile3
software. See page 23 for IntelliFile3
programming instructions.
19

2. If an IR repeater system is not used
then careful attention should be
paid to making all sequences as
short as possible. This will minimize
the possibility of unreliable system
operation due to the blockage of
the IR commands by a person
walking in front of the remote
during operation.

(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION

S Y S T E M

D E S I G N

G U I D E

CABLE SCHEDULE
Global source connections to Master GXR2, VS-6
QTY

CABLE

SIGNAL

FROM

1

Stereo RCA

Audio

Parent's TiVo

1

Component

Video

Parent's TiVo

VS-6/Input 1

1

Flasher

IR

Master GXR2/IM-AUDIO #1

1

Stereo RCA

Audio

Kid's TiVo

1

Component

Video

Kid's TiVo

Parent's TiVo
Master GXR2/
IM-AUDIO #2
VS-6/Input #2

1

Flasher

IR

Master GXR2/IM-AUDIO #2

Kid's TiVo

1

Stereo RCA

Audio

Blu-ray Player (shared)

1

Component

Video

Blu-ray Player (shared)

1

Flasher

IR

Master GXR2/IM-AUDIO #3

1

RG-6

RF

Sat. Radio Antenna

1

RG-6

RF

Sat. Radio Antenna

1

30 pin

Audio+Data

SmartDock2

Master GXR2/
Network Switch
Master GXR2/ Zone 3
1
Stereo RCA
Audio
Pream Output
Master GXR2/ Zone 4
1
Stereo RCA
Audio
Pream Output
Dedicated source connections to Home Theater Receiver
(Needed for each Theater Zone)
1

CAT-5

Network

QTY

CABLE

SIGNAL

1

HDMI

Video

1

Mono RCA

Digital Audio

1

Mono RCA

Digital Audio

TO
Master GXR2/
IM-AUDIO #1

Master GXR2/
IM-AUDIO #3
VS-6/Input #3
Blu-ray Player
(shared)
Master GXR2/
TM-XM #1
Master GXR2/
TM-XM #2

1

Flasher

IR

IRG

Plasma TV

Master GXR2/
Network Switch

RFG (Master RF Base)

ZigBee network connections
1

CAT-5

Network

HT-MSU connections (Needed for each Theater Zone)
1

CAT-5

Network

HT-MSU/Expansion

Master GXR2/
IM-iCARD2

1

3.5 mm

12V DC

HT-MSU/Src #1
Sync

VS-6/Out to
Master GXR2

1

Flasher

IR

Media Room

1

Flasher

IR

Loft

1

Flasher

IR

HT-MSU/Src #1
IR Out
HT-MSU/TV
IR Out
HT-MSU/Receiver
IR Out

Master GXR2/
Network Switch
LS-1 (sensing Toslink
output on dedicated
Blu-ray player
Blu-ray Player
(dedicated)
Plasma/LCD (dedicated)
HT Receiver (dedicated)

Other Home Theater Receiver connections (Needed for each Theater Zone)

FROM

TO

Blu-ray Player
(dedicated)
Blu-ray Player
(dedicated)

HT Receiver/
HDMI 1 In
HT Receiver/TV
Coax Dig. In
HT Receiver/CD
Coax Dig. In

CD Player

Room connections (needed for each area that accesses the
audio/video sources)
QTY
CABLE
SIGNAL
FROM
TO
Master GXR2/Zone
1
Speaker
Audio
Speakers
1 Speaker
Master GXR2/
1
CAT-5
Network
Contact
Network Switch
1
CAT-5
Video
VS-6/Zone 1
C5-HDDAWM Balun
C5-HDDAWM
1 Component
Video
Plasma TV
Balun
1
3.5mm
Sync
CS-12V
IRG
VS-6/Network
1
CAT-5
Network
IRG
Switch

HT Receiver/
Plasma/LCD HDMI In
HDMI Out
HT Receiver/
Plasma/LCD
1 Component
Video
Component In
Component Out
HT Receiver/
1
Mono RCA
Audio
Subwoofer LFE In
Sub Out
HT Receiver/L/C/R/
L/C/R/SL/SR/RL/RR
1
Speaker
Audio
SL/SR/RL/RR
Speakers
Room connections (needed for each area that accesses audio
sources only)
Master GXR2/
1
Speaker
Audio
Speakers
Zone 1 Speaker
Master GXR2/
1
CAT-5
Network
Contact
Network Switch
1

HDMI

Video

(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION

20

S Y S T E M

D E S I G N

G U I D E

S Y S T E M

D E S I G N

G U I D E

APPLICATION: INTEGRATING ONE OR MORE HT-MSU CONTROLLED THEATERS AND AN IR ONLY
CONTROLLED THEATER WITH AN INTELLICONTROL ICS SYSTEM

21

(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION

(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION

22

S Y S T E M

D E S I G N

G U I D E

INTELLIFILE3 PROGRAMMING STEPS
UPDATE PROGRAMMING SOFTWARE
Always update your software to the latest version of IntelliFile3 before installing any products. IntelliFile3 can be
downloaded at www.intellicontrol.com/techsupport

UPDATE FIRMWARE
All units must be hard-wire connected to the GXR2 during firmware update. Always perform a firmware update on all
previously installed IntelliControl ICS products before adding new products. Follow this sequence:
1. Upload previous programming from the GXR2
2. Firmware update the current system
3. Unplug the GXR2
4. Connect the new products to the GXR2
5. Reconnect the power to the GXR2
6. Perform firmware update on the new products, including the HT-MSU and the iRemoteTS
7. Upload previous programming from the GXR2 again

PROGRAMMING SEQUENCE
ALL UNITS MUST BE HARD-WIRE CONNECTED TO THE GXR2 DURING PROGRAMMING:

1. Perform MultiZone programming first
and upload to the Master GXR2 and
iRemoteTS’s

2. Perform home theater programming and
upload to the HT-MSU’s

3. Upload the home theater programming
to the iRemoteTS’s

4. Locate all wireless devices to their final
position in the installation

5. Perform a “Reset Net” from the installer
screen of one of the End-Points
(iRemote, iRemoteTS or wireless keypad)
23

(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION

S Y S T E M

D E S I G N

G U I D E

NOTES:

(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION

24

S Y S T E M

NOTES:

25

(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION

D E S I G N

G U I D E

ADDITIONAL INFORMATION
WARRANTY
All Niles products are manufactured with reliability in mind and backed by
factory warranties against defects in materials or workmanship. For details,
see warranty statement included with each product.

We are eager to hear your product suggestions.
Please e-mail your suggestions to: productsuggestions@nilesaudio.com
Niles strives to constantly improve our products,
all specifications may change without notice.

CUSTOMER SERVICE - TECHNICAL SUPPORT:
BY PHONE (IN USA OR CANADA)

1-800 -BUY-HIFI (289-4434)
BY PHONE (OUTSIDE USA)

1-305-238-4373
CUSTOMER SERVICE HOURS

8:00 A M to 5:30 PM ET
TECHNICAL SUPPORT HOURS

8:00 A M to 7:00 PM ET
ON THE WEB

w w w.nilesaudio.com
EMAIL TECHNICAL SUPPORT

techsupport@nilesaudio.com
EMAIL FOR PRODUCT SUGGESTIONS

productsuggestions@nilesaudio.com

©2010 Niles Audio Corporation 12331 S.W. 130 Street, Miami, FL 33186 Tel: 800.289.4434 or 305.238.4373 – www.nilesaudio.com – All rights reserved. Niles, the
Niles logos, IntelliControl, SmartDock, IntelliFile, Transport and iREMOTE are registered trademarks of Niles Audio Corporation. All other trademarks are the property of
their respective owners. Niles reserves the right to change specifications and descriptions without notice. The technical and other information contained herein is not intended
to set forth all technical and other specifications. LT00305A

(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION

26

Niles Audio Corporation
12331 SW 130th Street, Miami FL 33186 Tel: 800-BUY-HIFI or 305-238-4373 – Fax: 305.238.0185 – www.nilesaudio.com



Navigation menu