Pdf Fg01576 System Design Guide User Manual

Pdf Fg01528 Im-Net System-Design-Guide pdf_FG01528_IM-Net_system-design-guide pdf_FG01528_IM-Net_system-design-guide FG01528 products

Pdf Fg01407 Rfg System-Design-Guide pdf_FG01407_RFG_system-design-guide pdf_FG01407_RFG_system-design-guide FG01407 products

Pdf Fg01403 Contact-Tt System-Design-Guide pdf_FG01403_Contact-TT_system-design-guide pdf_FG01403_Contact-TT_system-design-guide FG01403 products

Pdf Fg01343 Ht-Msu System-Design-Guide pdf_FG01343_HT-MSU_system-design-guide pdf_FG01343_HT-MSU_system-design-guide FG01343 products

Pdf Fg01341 Iremote-Ts System-Design-Guide pdf_FG01341_IREMOTE-TS_system-design-guide pdf_FG01341_IREMOTE-TS_system-design-guide FG01341 products

2017-06-28

User Manual: Manual Pdf Fg01576 System-Design-Guide pdf_FG01576_system-design-guide FG01576 products

Open the PDF directly: View PDF PDF.
Page Count: 24

SYSTEM DESIGN GUIDE
NILES AUDIO CORPORATION
I
CS
INCLUDES:
• INTEGRATING A NILES HT-MSU WITH AN INTELLICONTROL ICS SYSTEM
• DESIGNING SYSTEMS WITH AN HT-MSU ASSIGNED TO A ZONE
• DESIGNING SYSTEMS WITH TWO TO FOUR HOME THEATER SYSTEMS
• DESIGNING SYSTEMS WITH ONE OR MORE HOME THEATER ZONE
AND AN IR ONLY
CONTROLLED HOME THEATER ROOM
• INTELLIFILE®3 PROGRAMMING OVERVIEW
VOLUME 2
SYSTEM DESIGN GUIDE
(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION
The following information simpli es and optimizes the design and implementation of a Home Theater System into an
IntelliControl ICS system. In addition, you’ll learn how to integrate up to four home theaters into a single system using multiple
HT-MSUs (Home Theater Main System Units).
INTRODUCTION
TABLE OF CONTENTS
How to Use this System Design Guide -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 2
Overview: Designing and Integrating Multiple Home Theater Systems with an IntelliControl ICS
Distributed Audio/Video System -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 3
Overview: Niles Home Theater Products -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 5
Overview: HT-MSU-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 5
Application: Controlling an ICS MultiZone A/V System & a Home Theater System Using an HT-MSU -- 7
Application: Assigning the HT-MSU to a Zone of an IntelliControl ICS Modular MultiZone Receiver-- -11
Application: Creating a system Design Incorporating Two to Four Home Theater System
(Multiple HT-MSU’s) - -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --15
Application: Integrating One or More HT-MSU Controlled Theaters and an IR only Controlled Theater
with an IntelliControl ICS System -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -19
IntelliFile®3 Programming Steps -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 23
SYSTEM DESIGN GUIDE
(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION
2
HOW TO USE THIS SYSTEM DESIGN GUIDE
Do This First
Installation instructions on
what you need to know
before you begin
What Does this
Application Do?
Description of application
Critical Knowledge
These are “must know”
details that you need
to know
Key Considerations
Important information that
you need to consider when
planning your design
Installation Requirements
Speci c installation details
that you need to know
Customer Benefits
What this application
does for your customer
Installer Benefits
What the application
does for you
Each chapter in the System Design Guide is broken up into sections to make comprehension easier. Each section contains
speci c information that is presented with graphic examples to further aid in understanding. Below is a description of what
information is contained within each section.
The Application
section provides you
with detailed info for
a speci c application
(see below)
The Cable Schedule
section lists all cables
used in cabling diagrams
(sometimes shown on
application page)
The Cable Diagram
section shows all
connection points
with color coded line
connections
SYSTEM DESIGN GUIDE
3
(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION
WHAT IS A HOME THEATER SYSTEM AND HOW
DOES IT INTEGRATE WITH AN INTELLICONTROL
ICS DISTRIBUTED AUDIO/VIDEO SYSTEM?
In today’s electronic age, a home theater system is an
ambiguous term. Typically, a home theater system is a
gathering of sources, to be shown and used with a display
device ( at panel TVs are popular). Sources may be as
simple as a DVD or Blu-ray player and a cable or satellite
tuner. In the typical home theater system, there is a surround
sound receiver to take advantage of the multi-speaker
theatrical soundtracks available from these sources.
Consumers have embraced and accepted the concept of
home theater systems and wish to have multiple theater
systems in the house such as the Family Room and the
Master Bedroom. Some of these theater rooms are also
doing double-duty by allowing access to sources that would
be available in a multi-zone distributed audio/video system.
Additionally, the client wants to have these theater systems
easy to operate even if the products used in the theater
systems are different. Ideally they would like to learn only
one remote or have one remote to seamlessly operate these
independent systems. This Advanced System Design Guide
will illustrate the different ways an IntelliControl ICS dealer
can integrate single or multiple home theater systems with
the IntelliControl ICS distributed audio/video system.
DEFINITION OF TERMS
HOME THEATER SYSTEM – A room with at least a display
device and/or a home theater receiver where the sound that
comes through the speakers is provided by the home theater
receiver or display device. (Sometimes also referred to as a
standalone theater, see Figure 1) This home theater can be
connected to the GXR2 by using the Phantom Theater Zone
connections (CAT-5 from HT-MSU to GXR2 or HT IR In and
HT Sync if using an original IntelliControl) and can share the
sources installed in the GXR2.
SHARED (OR SHARING SOURCES) – When a home theater
system is connected to the GXR2 Modular MultiZone
Receiver via the phantom zone connections and source
audio is sent one source at a time to the home theater
receiver via the card cascade outputs. This requires the
home theater system to switch its input every time a different
source is requested from ICS. It also increases the number
of inputs required and cabling by a factor of six maximum.
This allows one home theater to share sources with ICS
without sacrifi cing a real zone (see Figure 2). This is covered
in the  rst application on pages 9-10 of this design guide.
OVERVIEW: DESIGNING AND INTEGRATING MULTIPLE
HOME THEATER SYSTEMS WITH AN INTELLICONTROL ICS
DISTRIBUTED AUDIO/VIDEO SYSTEM
DEDICATED SOURCES
HOME THEATER
DISPLAY DEVICE
Blu-ray
Player
TiVo®
Plasma/
LCD
SURROUND RECEIVER
DISPLAY DEVICE
SHARED SOURCES
DEDICATED SOURCES
Blu-ray
Player
TiVo®
Plasma/
LCD
HOME THEATER
IntelliControl® ICS
MULTIZONE
Figure 2 Sharing Sources
Figure 1
SYSTEM DESIGN GUIDE
(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION
4
HOUSE ZONE – House zones come in three forms:
1) Audio Only Zone: A zone that has the sound provided by
the GXR2 Modular MultiZone Receiver.
2) Audio/Video Zone: Any zone on an IntelliControl ICS
System that is getting an audio feed from a GXR2 and
video feed from a VS-6. In addition, an IRG is used to
automate power and source input of the display device in
that zone. No local source or home theater receiver is
involved in an Audio/Video Zone
3) Theater Zone: A room with at least a display device and
one or more local sources. Local theater zone components
must be HT-MSU controlled. Additionally, a theater zone
may or may not include a home theater receiver. A theater
zone takes up a zone on a GXR2 chassis, making every
GXR2 source available for the theater zone.
ZONE SOURCE UTILIZATION – When a theater zone is
connected to the GXR2 Modular MultiZone Receiver via a
xed pre-amp output, the audio from that zone can be sent
to the home theater receiver over one pair of cables
connected to a single input. The speaker outputs of the
theater zones of the GXR2 are unused (see Figure 3). This
is detailed in the application on pages 11-14.
THEATER ZONE CONTROL – Is de ned as anything that
must be done to provide local audio and control in a Theater
Zone through a TV and/or a home theater receiver. This
includes but is not limited to volume, mute, power, input,
surround mode, etc. (Up to four Theater Zones can be
con gured on an IntelliControl ICS system).
IR-ONLY THEATER ROOM – Is de ned as a room with a
local display and sources that are not connected to the
IntelliControl ICS system, yet are to be controlled by
the iRemoteTS handset via direct line-of-sight IR.
Typically this is a guest bedroom and the clients wish to
include the operation of the local TV with the iRemoteTS and
only have to learn one remote. This is detailed in the
application on pages 19-22.
ZONE SOURCE UTILIZATION
DISPLAY DEVICE
GLOBAL SOURCES
Blu-ray
Player
TiVo®
Plasma/
LCD
THEATER ZONE 5
IntelliControl® ICS
MULTIZONE
Figure 3 Zone Source Utilization
SYSTEM DESIGN GUIDE
5
(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION
12V DC POWER CONNECTION
A 12V DC UL-Listed external power
supply is included
ASSIGNABLE 12V OUTPUTS
Integrate electronic components
and outboard automation devices to
satisfy all your customization needs
ASSIGNABLE RELAYS
Contact closures/relays can be
programmed to automate lights,
curtains, screen lifts and other devices
RF ANTENNA
CONNECTION
The HT-MSU comes with a
10-foot antenna extension so
the supplied RF antenna can
be installed in the location
where it works best
GLOBAL IR OUTPUT
This output provides all of the IR
codes that the Main System Unit
generates, plus any codes that
come in through the Infrared Input.
Commonly used with Niles IRB1
High-Output IR Flashers to control all
components with only one flasher
INFRARED INPUT
Provides a connection for an IR sensor
that enables IR control of the Main
System Unit and also acts as an IR
pass-through for connected sources
POWER SYNC PORTS
These ports sense the power
status of the home theater
components so the correct on/off
commands are always issued
PC CONFIGURATION/
EXPANSION
This connection is used to
configure the HT-MSU with
a laptop computer and for
expanding the system design
IR AND RS-232
SERIAL OUTPUT PORTS
The HT-MSU provides the flexibility to
control home theater components
via IR and RS-232 control
LOW-PROFILE, EASY INSTALL DESIGN
Two-way mounting ears enable the MSU to be
mounted vertically or horizontally
Product Model Stock No. Description Master RF
Base RF Repeater Base End-Point
iRemoteTS FG01341 Wireless Color
Touchscreen X
HT-MSU FG01343 Home Theater Main
System Unit X1X2
1 The HT-MSU functions as a Master RF Base when used in a stand-alone application (no connections to GXR2).
2 Build 140 or greater of IntelliFile 3 allows the HT-MSU to function as an RF Repeater Base.
OVERVIEW: NILES HOME THEATER PRODUCTS
Below are the available Niles Home Theater products and the ZigBee RF nodes they are able to function as. As you can see,
some devices are dedicated as End-Points (i.e., iRemoteTS). Other devices can be con gured to operate as a Master RF
Base, or an RF Repeater Base (i.e., HT-MSU). Unlike the iRemote, the iRemoteTS DOES NOT contain a ZigBee RF radio in its
charging base.
OVERVIEW: HT-MSU
SYSTEM DESIGN GUIDE
(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION
6
ONE TOUCH TO ENTERTAINMENT® OFFERS
SIMPLE CONTROL OF COMPLEX SYSTEMS
The Niles HT-MSU Home Theater Main System Unit simpli es
entertainment by allowing one-touch control of home theater
components. Ordinary home theater system controllers
require users to turn on (and off) multiple components,
resulting in a confusing situation of hunting down the fugitive
component that is “off,” when it really should be “on.
The HT-MSU eliminates the confusion by shifting control to
an interface box. The remote initiates commands to the HT-
MSU, so whether you’re playing a DVD or watching a program
recorded on your DVR, the HT-MSU provides one-touch
access to all your entertainment.
ASSIGNABLE RELAYS AND 12V OUTPUTS
Three dry contact closures and three 12V DC trigger outputs
can be independently programmed to give installers greater
control of mechanical devices or voltage-triggered power
strips and dispersion controlled home theater loudspeakers.
INTELLIGENT INTEGRATION WITH MULTI-ZONE
SYSTEMS
The HT-MSU includes control ports that allow it to “share”
sources with whole-house distributed audio systems. The
power state of these “shared” sources can be completely
managed so that sources are always powered-on when they
need to be and powered-off when both whole-house and
home theater systems are turned off.
PROGRAM MEMORY PROTECTION
The entire system pro le is stored in non-volatile memory
within the HT-MSU. This safeguards against accidental loss
of the con guration programming for the entire life of the
product.
IR CONTROL
The HT-MSU has 8 IR output ports allowing for control of 8
sources local to the theater system.
RS-232 CONTROL
The HT-MSU has 8 RS-232 output ports allowing for control
of 8 sources local to the theater system.
ZIGBEE RADIO
Hide Away Your Equipment – The HT-MSU’s ZigBee RF
wireless technology can transmit through walls and ceilings.
This opens up a whole new world of installation possibilities.
Hang a  at panel TV on your living room wall and install all
the other equipment in a closet, in another room, or even in
the garage. The living room keeps its clean look and you get
all the fun and excitement that a home theater delivers.
INTELLICONTROL ICS INTEGRATION
Con guration is accomplished quickly and easily using
IntelliFile3 software program. A wizard guides the installer,
step-by-step, through the con guration process. The
software program archives customer and IR  les for use with
future installations.
OVERVIEW: HT-MSU
SYSTEM DESIGN GUIDE
7
(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION
WHAT DOES THIS APPLICATION DO?
This application covers the use of an iRemoteTS as the primary controller of a home theater system and an IntelliControl ICS
audio/video system. In this scenario, some or all of the sources connected to the IntelliControl ICS system are shared with the
home theater receiver, the home theater system does not take up a zone on the IntelliControl ICS system, and the iRemoteTS is
used in a single room which also contains the home theater.
When the iRemoteTS is confi gured with
an HT-MSU and an IntelliControl ICS
system, the sources can be shared
between the audio distribution system
and the home theater (e.g., an
IM-iCARD2 card can be shared between
the GXR2 and the home theater
receiver). In this confi guration, metadata
will be displayed on the home theater
side of the remote when these sources
are selected. Additionally, the home
theater can have dedicated sources that
are not accessible from the audio/video
distribution system (e.g., a DVR that
is only connected to the home theater
receiver).
You should think of the iRemoteTS
as two separate remotes in one. The
“House” side of the remote is accessed
by pressing House and provides similar
functionality with metadata to a Contact
or Contact-TT. The “Theater” side of the
remote is accessed by pressing Theater
and includes the following:
Up to 12 Master Keys which can be
used to access dedicated sources of a
home theater, sources shared with the
IntelliControl ICS AV system, or can be
used for tasks (e.g., a Master Key label
“LiveTV” and a second one labeled
“List” would access a single DVR).
Each Master Key can access up to
four touchscreen pages (transport,
numeric, extra, and favorites) which are
confi gured in the IntelliFile3 software.
The favorites page can have up to
20 channel icons or generic labelled
buttons. Each favorite page shows fi ve
favorites.
When a Master Key for a source that
is also shared with the IntelliControl
ICS AV system is selected, metadata
screens are automatically included
in the pages for that Master Key (if
available from the source).
When accessing the “House” side of
the iRemoteTS, the hard button cursor
keys can be programmed for use with
devices connected to an IM-Audio card
but cannot be used for controlling Niles
audio sources, such as a TM-Sirius card.
For Niles audio sources, the navigation
soft keys on the touchscreen are used.
Key Considerations Customer Benefi ts
Your customer will have full access to
all sources whether they are part of
the home theater or the audio/video
distribution system from an ergonomic
and easy to use wireless remote.
Additionally, channel surfi ng is further
simplifi ed through icon-based favorite
channels. Finally, these controls can be
used to control any zone in the house
as long as it is within range of a Niles
ZigBee network.
Installation Benefi ts
This application allows positive control of
a home theater system via IR or RS-232,
and the sharing of sources to the home
theater that are available to the house
audio distribution system. All sources
with metadata can be easily controlled
via the color touchscreen.
INSTALLATION REQUIREMENTS
IntelliFile3 Capture Station and latest
version of IntelliFile3 software
CRITICAL KNOWLEDGE
1. An HT-MSU is required in order to
have metadata screens displayed on
the “Theater” side of the remote.
2. The iRemoteTS must be within range
of a Niles ZigBee network in all areas
where the customer desires control.
(Please read the How to Design
and Implement a Niles ZigBee
RF Network from System Design
Guide, Vol. 1 section thoroughly to
understand how to deploy a ZigBee
network in order to provide coverage
in all desired areas).
3. The ZigBee transmitter in the
HT-MSU is disabled when connected
to the GXR2, unless confi gured
to be an RF Repeater Base using
IntelliFile3.
APPLICATION: CONTROLLING AN ICS MULTIZONE A/V
SYSTEM & HOME THEATER USING AN HT-MSU
DO THIS FIRST Review Designing a Niles ZigBee RF Network
in the IntelliControl ICS System Design Guide
, Vol. 1
(See System Support Material at: www.intellicontrol.com/ICS/downloads.php)
SYSTEM DESIGN GUIDE
(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION
8
CABLE SCHEDULE
Shared source connections to Master GXR2, VS-6, and Home
Theater Receiver
Room connections (needed for each area that accesses the
audio/video sources)
QTY CABLE SIGNAL FROM TO QTY CABLE SIGNAL FROM TO
1 Stereo RCA Audio Parent's TiVo Master GXR2/
IM-AUDIO #1 1Speaker Audio
Master GXR2/Zone
1 Speaker Speakers
1 Component Video Parent's TiVo VS-6/Input 1 1 CAT-5 Network Master GXR2/
Network Switch Contact
1 Mono RCA Digital Audio Parent's TiVo
HT Receiver/
Video 2 Coax
Dig. In
1 CAT-5 Video VS-6/Zone 1 C5-HDDAWM Balun
1 Flasher IR Master GXR2/IM-AUDIO #1 Parent's TiVo 1 Component Video C5-HDDAWM
Balun Plasma TV
1 Stereo RCA Audio Kid's TiVo Master GXR2/
IM-AUDIO #2 13.5mm Sync CS-12V IRG
1 Component Video Kid's TiVo VS-6/Input #2 1 CAT-5 Network VS-6/Network
Switch IRG
1 Mono RCA Digital Audio Kid's TiVo
HT Receiver/
Video 1 Coax
Dig. In
1 Flasher IR IRG Plasma TV
1 Flasher IR Master GXR2/IM-AUDIO #2 Kid's TiVo ZigBee network connections
1 Stereo RCA Audio Blu-ray Player (shared) Master GXR2/
IM-AUDIO #3 1CAT-5Network
Master GXR2/
Network Switch RFG (Master RF Base)
1 Component Video Blu-ray Player (shared) VS-6/Input #3 1 12V Power
Supply Power Wall AC Outlet RFG (RF Repeater Base)
1 Mono RCA Digital Audio Blu-ray Player (shared) HT Receiver/DVD
Coax Dig. In HT-MSU connections
1 Flasher IR Master GXR2/IM-AUDIO #3 Blu-ray Player
(shared) 1CAT-5NetworkHT-MSU/Expansion Master GXR2/
Network Switch
1 RG-6 RF Sat. Radio Antenna Master GXR2/
TM-XM #1 1 3.5 mm 12V DC HT-MSU/Src #1
Sync
LS-1 (sensing Toslink
output on dedicated
Blu-ray player
1 RG-6 RF Sat. Radio Antenna Master GXR2/
TM-XM #2 1 Flasher IR HT-MSU/Src #1
IR Out
Blu-ray Player
(dedicated)
1 30 pin Audio+Data SmartDock2 Master GXR2/
IM-iCARD2 1 Flasher IR HT-MSU/Src #2
IR Out CD Player
1 CAT-5 Network Master GXR2/
Network Switch
VS-6/Out to
Master GXR2 1RS-232Control HT-MSU/TV
RS-232 Out
Projector RS-232
Control In
1 Component Video VS-6/Cascade Out #1
HT Receiver/
Component
Video 1 In
1RS-232Control
HT-MSU/Receiver
RS-232 Out
HT Receiver RS-232
Control In
1 Component Video VS-6/Cascade Out #2
HT Receiver/
Component
Video 2 In
13.5mm12V DC HT-MSU/
Trigger #1 Out
AC-3 (Switch outlet for
CD player)
1 Component Video VS-6/Cascade Out #3
HT Receiver/
Component
DVD In
13.5mm12V DC HT-MSU/
Trigger #2 Out
Projection Screen
Trigger In
1 Stereo RCA Audio Master GXR2/TM-XM
Out #1
HT Receiver/
Aux 3 In Other Home Theater Receiver connections
1 Stereo RCA Audio Master GXR2/TM-XM
Out #2
HT Receiver/
Aux 2 In 1HDMI Video HT Receiver/
HDMI Out Projector HDMI In
1 Stereo RCA Audio Master GXR2/
IM-iCARD2 Out
HT Receiver/
Aux 1 In 1 Component Video HT Receiver/
Component Out Projector Component In
Dedicated source connections to Home Theater Receiver 1Mono RCA Audio HT Receiver/
Sub Out Subwoofer LFE In
QTY CABLE SIGNAL FROM TO 1Speaker Audio
HT Receiver/L/C/R/
SL/SR/RL/RR
L/C/R/SL/SR/RL/RR
Speakers
1HDMI Video Blu-ray Player
(dedicated)
HT Receiver/
HDMI 1 In
Room connections (needed for each area that accesses audio
sources only)
1 Mono RCA Digital Audio Blu-ray Player
(dedicated)
HT Receiver/TV
Coax Dig. In 1Speaker Audio Master GXR2/
Zone 1 Speaker Speakers
1 Mono RCA Digital Audio CD Player HT Receiver/CD
Coax Dig. In 1CAT-5Network
Master GXR2/
Network Switch Contact
SEE NEXT PAGE
FOR DIAGRAM
SYSTEM DESIGN GUIDE
9
(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION
SYSTEM DESIGN GUIDE
(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION
10
APPLICATION: CONTROLLING AN ICS MULTIZONE A/V SYSTEM & HOME THEATER USING AN HT-MSU
(Example shown is a 6 zone audio system with 6 zones of video distribution with an automated home
theater system)
SYSTEM DESIGN GUIDE
11
(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION
WHAT DOES THIS APPLICATION DO?
This application allows you to assign the Niles HT-MSU to a zone on an IntelliControl ICS Modular MultiZone Receiver, and gain
the convenience of having the audio for all of the sources in the GXR2 Modular MultiZone Receiver provided over one set of RCA
cables utilizing the GXR2 zone pre-amp output and connected to one input of the surround receiver for that theater zone.
DO THIS FIRST
Review Designing a Niles RF Network in the IntelliControl ICS System Design Guide, Vol. 1
Key Considerations
Assigning an HT-MSU to a zone means
the home theater receiver is now the
amplifi er for that zone of the GXR2
Modular MultiZone Receiver the HT-MSU
is assigned to. The speaker outputs
(GXR2) of the zone the HT-MSU is
assigned to are no longer adjustable
from a keypad or remote. Any keypad or
remote assigned to control the HT-MSU
theater zone will control the volume
control of the surround receiver for that
Theater Zone
INSTALLATION REQUIREMENTS
IntelliFile3 Capture Station and
the latest version of IntelliFile3
software. See page 23 for IntelliFile3
programming instructions.
A CAT-5 connection from the
IntelliControl ICS Modular MultiZone
Receiver to the Niles HT-MSU
An established RF network on the
IntelliControl ICS Modular MultiZone
Receiver in which the iRemoteTS
can communicate
CRITICAL KNOWLEDGE
1. Once you assign an HT-MSU to
a zone of the IntelliControl ICS
Modular MultiZone Receiver,
that zone’s pre-amp outputs
automatically become fi xed
2. The speaker outputs of a theater
zone are no longer controllable from
any user interface (In effect, you
cannot use them any longer)
3. Any user interface assigned to
control the theater zone will control
the volume on the surround receiver
for that zone
4. The theater zone will now show up
in order, on the zone listing for any
user interface (keypad or remote)
5. The ZigBee radio of the HT-MSU
connected to an IntelliControl ICS
Modular MultiZone Receiver can
only be a repeater or turned off
and must communicate through
a Master RF base assigned to the
IntelliControl ICS Modular MultiZone
Receiver.
APPLICATION: ASSIGNING THE HT-MSU TO A ZONE OF
AN INTELLICONTROL ICS MULTIZONE A/V SYSTEM
Customer Benefi ts
Your customer will now have the zone
conveniences available to them such as
Party Mode and Global Off from any User
interface on the IntelliControl ICS system.
Additionally, your customers will have the
convenience of seamless control of the
Theater Zone and its local sources as
if it was just another zone on the GXR2
Modular MultiZone Receiver.
Installation Benefi ts
The system designer and installer gain
the convenience of having the audio
for all of the sources in the GXR2
Modular MultiZone Receiver provided
over one set of RCA cables utilizing
the GXR2 zone pre-amp output and
connected to one input of the surround
receiver for that theater zone. If the
home theater receiver for that zone is
located in the zone (not centrally located)
the installer can use one set of RCA
connections and/or extend one set of
RCA connections using a pair of Niles
CAT-5 audio baluns. The installer/system
designer can choose to use any input on
the surround receiver for all of the audio
from the GXR2 sources. No longer do
you have to split the sources and use
many inputs on the surround receiver.
SYSTEM DESIGN GUIDE
(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION
12
CABLE SCHEDULE
Shared source connections to Master GXR2, VS-6, and Home
Theater Receiver
Room connections (needed for each area that accesses the
audio/video sources)
QTY CABLE SIGNAL FROM TO QTY CABLE SIGNAL FROM TO
1 Stereo RCA Audio Parent's TiVo Master GXR2/
IM-AUDIO #1 1Speaker Audio
Master GXR2/Zone
1 Speaker Speakers
1 Component Video Parent's TiVo VS-6/Input 1 1 CAT-5 Network Master GXR2/
Network Switch Contact
1 Mono RCA Digital Audio Parent's TiVo
HT Receiver/
Video 2 Coax
Dig. In
1 CAT-5 Video VS-6/Zone 1 C5-HDDAWM Balun
1 Flasher IR Master GXR2/IM-AUDIO #1 Parent's TiVo 1 Component Video C5-HDDAWM
Balun Plasma TV
1 Stereo RCA Audio Kid's TiVo Master GXR2/
IM-AUDIO #2 13.5mm Sync CS-12V IRG
1 Component Video Kid's TiVo VS-6/Input #2 1 CAT-5 Network VS-6/Network
Switch IRG
1 Mono RCA Digital Audio Kid's TiVo
HT Receiver/
Video 1 Coax
Dig. In
1 Flasher IR IRG Plasma TV
1 Flasher IR Master GXR2/IM-AUDIO #2 Kid's TiVo ZigBee network connections
1 Stereo RCA Audio Blu-ray Player (shared) Master GXR2/
IM-AUDIO #3 1CAT-5Network
Master GXR2/
Network Switch RFG (Master RF Base)
1 Component Video Blu-ray Player (shared) VS-6/Input #3 Theater Zone HT-MSU connections
1 Mono RCA Digital Audio Blu-ray Player (shared) HT Receiver/DVD
Coax Dig. In 1CAT-5NetworkHT-MSU/Expansion Master GXR2/
Network Switch
1 Flasher IR Master GXR2/IM-AUDIO #3 Blu-ray Player
(shared) 1 3.5 mm 12V DC HT-MSU/Src #1
Sync
LS-1 (sensing Toslink
output on dedicated
Blu-ray player
1 RG-6 RF Sat. Radio Antenna Master GXR2/
TM-XM #1 1 Flasher IR HT-MSU/Src #1
IR Out
Blu-ray Player
(dedicated)
1 RG-6 RF Sat. Radio Antenna Master GXR2/
TM-XM #2 1 Flasher IR HT-MSU/Src #2
IR Out CD Player
1 30 pin Audio+Data SmartDock2 Master GXR2/
IM-iCARD2 1 Flasher IR IR Out Plasma
1 CAT-5 Network Master GXR2/
Network Switch
VS-6/Out to
Master GXR2 1 Flasher IR HT-MSU/Receiver
IR Out HT Receiver (dedicated)
1 Component Video VS-6/Cascade Out #1
HT Receiver/
Component
Video 1 In
Other Home Theater Receiver connections
1 Component Video VS-6/Cascade Out #2
HT Receiver/
Component
Video 2 In
1HDMI Video HT Receiver/
HDMI Out Plasma/LCD HDMI In
1 Component Video VS-6/Cascade Out #3
HT Receiver/
Component
DVD In
1 Component Video HT Receiver/
Component Out
Plasma/LCD
Component In
1 Stereo RCA Audio Master GXR2/TM-XM
Out #1
HT Receiver/
Aux 3 In 1Mono RCA Audio HT Receiver/
Sub Out Subwoofer LFE In
1 Stereo RCA Audio Master GXR2/TM-XM
Out #2
HT Receiver/
Aux 2 In 1Speaker Audio
HT Receiver/L/C/R/
SL/SR/RL/RR
L/C/R/SL/SR/RL/RR
Speakers
1 Stereo RCA Audio Master GXR2/
IM-iCARD2 Out
HT Receiver/
Aux 1 In
Room connections (needed for each area that accesses audio
sources only)
Dedicated source connections to Home Theater Receiver 1Speaker Audio Master GXR2/
Zone 1 Speaker Speakers
QTY CABLE SIGNAL FROM TO 1CAT-5Network
Master GXR2/
Network Switch Contact
1HDMI Video Blu-ray Player
(dedicated)
HT Receiver/
HDMI 1 In
1 Mono RCA Digital Audio Blu-ray Player
(dedicated)
HT Receiver/TV
Coax Dig. In
1 Mono RCA Digital Audio CD Player HT Receiver/CD
Coax Dig. In
SEE NEXT PAGE
FOR DIAGRAM
SYSTEM DESIGN GUIDE
13
(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION
SYSTEM DESIGN GUIDE
(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION
14
APPLICATION: EXAMPLE OF A SIX ZONE AUDIO/VIDEO SYSTEM WITH
ONE AUTOMATED HOME THEATER ZONE
SYSTEM DESIGN GUIDE
15
(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION
WHAT DOES THIS APPLICATION DO?
This application covers the use of an iRemoteTS as the primary home theater controller for two to four home theater zones. This
application also details how a Niles HT-MSU is assigned to a zone of an IntelliControl ICS system. In this scenario, some or all of
the sources connected to the IntelliControl ICS system are used with the zone’s home theater receiver.
DO THIS FIRST Review Designing a Niles ZigBee RF Network
in the IntelliControl ICS System Design Guide
, Vol. 1
(See System Support Material at: www.intellicontrol.com/ICS/downloads.php)
A Theater Zone is an IntelliControl ICS
system zone where a separate home
theater receiver is used to amplify that
zone’s speakers. When an iRemoteTS
is confi gured with multiple HT-MSU’s,
sources can be utilized for both the
GXR2 and the home theater receiver.
For example, an IM-iCARD2 can be
shared between the GXR2 and the home
theater receiver. In this confi guration,
metadata is displayed on the home
theater side of the iRemoteTS when
selected. Additionally, the home theater
zone can have dedicated sources that
are not accessible from the GXR2 (e.g., a
DVR that is only connected to the home
theater receiver). It is helpful to think of
the iRemoteTS as two separate remotes
in one. The “House” side of the remote
is accessed by pressing House and
provides similar functionality to a Contact
or Contact-TT, including metadata. The
“Theater” side of the remote is accessed
by pressing Theater and includes the
following:
Up to 12 Master Keys that access
dedicated home theater sources and
IntelliControl ICS system sources.
Master Keys can also be used to initiate
tasks. For example, a Master Key labeled
“LiveTV” and a second one labeled “List”
would access a single DVR.
Master Keys can access up to
four touchscreen pages: transport,
numeric, extra, and favorites. They are
confi gured in the IntelliFile3 software.
The favorites page contains up to
20 channel icons or generic labeled
buttons, along with fi ve favorites.
When a Master Key is selected for
use as a source from the IntelliControl
ICS system, metadata screens are
automatically included in the pages for
that Master Key (if available from the
source). When accessing the “House”
side of the iRemoteTS, the hard button
cursor keys can be programmed for
use with devices connected to an
IM-Audio card. They cannot be used
for controlling IntelliControl ICS audio
sources such as a TM-Sirius® card. For
IntelliControl ICS audio sources, the
navigation soft keys on the touchscreen
are used.
Key Considerations Customer Benefi ts
Using an easy-to-operate wireless
remote, your customer gains full access
to all sources–whether they are part
of an audio and/or video zone or a
home theater zone. Channel surfi ng
is also simplifi ed through icon-based
favorite channels. A single iRemoteTS
can be confi gured to control up to four
theater zones. Any of these zones can
be controlled by multiple iRemoteTS’s.
Finally, these controls can be used to
operate any zone in the house, as long
as it is within range of its respective Niles
ZigBee network.
Installation Benefi ts
This application allows positive control
of up to four home theater zones via
IR or RS-232. It also allows the usage
of IntelliControl ICS System sources
with the home theater. All sources with
metadata can be easily controlled via the
color touchscreen.
CRITICAL KNOWLEDGE
1. An HT-MSU is required in order to
have metadata screens displayed on
the “Theater” side of the remote.
2. The iRemoteTS must be within range
of a Niles ZigBee network wherever
the customer wants control. Review
Designing a Niles ZigBee RF Network
in the IntelliControl ICS System Design
Guide
, Vol. 1.
3. The ZigBee transmitter in the
HT-MSU can be confi gured as an
RF Repeater Base using IntelliFile3
software.
4. For each theater zone, the pre-amp
audio outputs of the GXR2 cascade
all sources to the home theater
receiver over a single connection.
APPLICATION: CREATING A SYSTEM DESIGN INCORPORATING
TWO TO FOUR HOME THEATERS (MULTIPLE HT-MSU’S)
INSTALLATION REQUIREMENTS
IntelliFile3 Capture Station and latest
version of IntelliFile3 software. See
page 23 for IntelliFile®3 programming
instructions.
SYSTEM DESIGN GUIDE
(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION
16
SEE NEXT PAGE
FOR DIAGRAM
CABLE SCHEDULE
Dedicated Sources to ICS System Theater Zones (needed for each Theater Zone)
QTY CABLE SIGNAL FROM TO QTY CABLE SIGNAL FROM TO
1 Stereo Audio Audio Parent’s Tivo Master GXR2/IM-Audio # 1 1 Stereo
Audio Audio Master GXR2/Zone 3
Line Out
Media Room/Re-
ceiver In
1 Component Video Parent’s Tivo VS-6/Input 1 1 CAT-5 Network Master GXR2/Network
Switch
Media Room/HT-
MSU
1 Flasher IR Master GXR2/
IM-Audio # 1 Parents Tivo 1 CAT-5 Video MasterVS-6/Zone 3 Media Room/C5-
HDDAWM
1 Stereo Audio Audio Kid’s Tivo Master GXR2/IM-Audio # 2 1 Component Video Media Room/C5-
HDDAWM
Media Room/
Receiver In
1 Component Video Kid’s Tivo VS-6/Input 1 1 CAT-5 Network Master GXR2/ Network
Switch Contact
1 Flasher IR Master GXR2/
IM-Audio # 2 Kid’s Tivo Media Room/Theater Zone - #3
1 Stereo Audio Audio Blu-ray Master GXR2/IM-Audio # 3 1 Speaker Audio HT Receiver -
L/C/R/RL/RR Speakers
1 Component Video Blu-ray VS-6/Input 1 1 Component Video Blu-ray Player HT Receiver/DVD In
1 Flasher IR Master GXR2/
IM-Audio # 3 Blu-ray 1 COAX Digital
Audio Blu-ray Player HT Receiver/DVD In
1 RG6 RF Sat Radio
Antenna Master GXR2/TM-XM # 4 1 Component Video HT Receiver/ Monitor
Out Plasma TV
1 RG6 RF Sat Radio
Antenna Master GXR2/TM-XM # 5 1 MF-1 IR HT-MSU/
Receiver IR Out HT- Receiver
1 30 Pin Audio+Data SmartDock2 Master GXR2/IM-iCARD2 # 6 1 MF-1 IR HT-MSU/ TV IR Out Plasma TV
Room Connections (needed for each area that accesses Audio/Video Sources 1 MF-1 IR HT-MSU/ SRC 1 IR Out Blu-ray Player
1Speaker Audio Master GXR2/
Zone 1 Speaker Zone 1 Speakers ZigBee Network Connections
1 CAT-5 Network Master GXR2/
Network Switch Contact 1 CAT-5 Network Master GXR2/
Network switch RFG/ (Master)
1CAT-5 Video VS-6/Zone 1
Output C5-HDDAWM Balun 1 12V Power
Supply Power Wall Outlet RFG (Repeater Base)
1 Component Video C5-HDDAWM
Balun Plasma TV
13.5mm Sync CS-12V IRG
1CAT-5
Network VS-6/ Network
Switch IRG
1 Flasher IR IRG Plasma TV
SYSTEM DESIGN GUIDE
17
(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION
SYSTEM DESIGN GUIDE
(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION
18
APPLICATION: EXAMPLE OF A SIX ZONE AUDIO SYSTEM WITH UP TO
FOUR AUTOMATED HOME THEATER SYSTEMS
SYSTEM DESIGN GUIDE
19
(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION
WHAT DOES THIS APPLICATION DO?
This application allows you to integrate infrared control in the iRemoteTS of rooms that have dedicated sources and a display
device and no integration with the IntelliControl ICS System. A primary example of this application is a Guest Bedroom that has
no speakers (and is not a zone) of the GXR2 Modular MultiZone Receiver, but has its own TV and cable box
DO THIS FIRST
Review Controlling a Stand-Alone Home Theater Via IR in the IntelliControl ICS System Design Guide, Vol.1
Key Considerations
A home theater zone is defi ned as a
zone of the IntelliControl ICS System
where a separate home theater receiver
is used to amplify the zone’s speakers.
When the iRemoteTS is confi gured with
multiple HT-MSU’s, sources can be
utilized for both the GXR2 and the home
theater receiver. For example, an
IM-iCARD2 can be shared between the
two. Each iRemoteTS can be confi gured
to control up to four theater zones.
Installation Benefi ts
This application allows control of a home
theater system via IR, which creates
opportunities to upgrade systems
already wired for IR control.
CRITICAL KNOWLEDGE
1. The IR sensor of the IR repeater
system should be placed high
enough in order to avoid blockage
of the IR commands by someone
walking in between the iRemoteTS
and the IR sensor, but low enough
as to not be severely off axis from
the customer’s preferred seating
location.
2. If an IR repeater system is not used
then careful attention should be
paid to making all sequences as
short as possible. This will minimize
the possibility of unreliable system
operation due to the blockage of
the IR commands by a person
walking in front of the remote
during operation.
APPLICATION: INTEGRATING ONE OR MORE HT-MSU
CONTROLLED THEATERS AND AN IR ONLY CONTROLLED
THEATER WITH AN INTELLICONTROL ICS SYSTEM
Customer Benefi ts
Give your customers one remote that
will control any zone on an GXR2
Modular MultiZone Receiver and control
the components in a room that has no
connection with an GXR2 at all.
INSTALLATION REQUIREMENTS
IntelliFile3 Capture Station and
the latest version of IntelliFile3
software. See page 23 for IntelliFile3
programming instructions.
SYSTEM DESIGN GUIDE
(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION
20
CABLE SCHEDULE
Global source connections to Master GXR2, VS-6 Room connections (needed for each area that accesses the
audio/video sources)
QTY CABLE SIGNAL FROM TO QTY CABLE SIGNAL FROM TO
1 Stereo RCA Audio Parent's TiVo Master GXR2/
IM-AUDIO #1 1Speaker Audio
Master GXR2/Zone
1 Speaker Speakers
1 Component Video Parent's TiVo VS-6/Input 1 1 CAT-5 Network Master GXR2/
Network Switch Contact
1 Flasher IR Master GXR2/IM-AUDIO #1 Parent's TiVo 1 CAT-5 Video VS-6/Zone 1 C5-HDDAWM Balun
1 Stereo RCA Audio Kid's TiVo Master GXR2/
IM-AUDIO #2 1 Component Video C5-HDDAWM
Balun Plasma TV
1 Component Video Kid's TiVo VS-6/Input #2 1 3.5mm Sync CS-12V IRG
1 Flasher IR Master GXR2/IM-AUDIO #2 Kid's TiVo 1 CAT-5 Network VS-6/Network
Switch IRG
1 Stereo RCA Audio Blu-ray Player (shared) Master GXR2/
IM-AUDIO #3 1 Flasher IR IRG Plasma TV
1 Component Video Blu-ray Player (shared) VS-6/Input #3 ZigBee network connections
1 Flasher IR Master GXR2/IM-AUDIO #3 Blu-ray Player
(shared) 1CAT-5Network
Master GXR2/
Network Switch RFG (Master RF Base)
1 RG-6 RF Sat. Radio Antenna Master GXR2/
TM-XM #1 HT-MSU connections (Needed for each Theater Zone)
1 RG-6 RF Sat. Radio Antenna Master GXR2/
TM-XM #2 1CAT-5NetworkHT-MSU/Expansion Master GXR2/
Network Switch
1 30 pin Audio+Data SmartDock2 Master GXR2/
IM-iCARD2 1 3.5 mm 12V DC HT-MSU/Src #1
Sync
LS-1 (sensing Toslink
output on dedicated
Blu-ray player
1 CAT-5 Network Master GXR2/
Network Switch
VS-6/Out to
Master GXR2 1 Flasher IR HT-MSU/Src #1
IR Out
Blu-ray Player
(dedicated)
1 Stereo RCA Audio Master GXR2/ Zone 3
Pream Output Media Room 1 Flasher IR HT-MSU/TV
IR Out Plasma/LCD (dedicated)
1 Stereo RCA Audio Master GXR2/ Zone 4
Pream Output Loft 1 Flasher IR HT-MSU/Receiver
IR Out HT Receiver (dedicated)
Dedicated source connections to Home Theater Receiver
(Needed for each Theater Zone) Other Home Theater Receiver connections (Needed for each Theater Zone)
QTY CABLE SIGNAL FROM TO 1HDMI Video HT Receiver/
HDMI Out Plasma/LCD HDMI In
1HDMI Video Blu-ray Player
(dedicated)
HT Receiver/
HDMI 1 In 1 Component Video HT Receiver/
Component Out
Plasma/LCD
Component In
1 Mono RCA Digital Audio Blu-ray Player
(dedicated)
HT Receiver/TV
Coax Dig. In 1Mono RCA Audio HT Receiver/
Sub Out Subwoofer LFE In
1 Mono RCA Digital Audio CD Player HT Receiver/CD
Coax Dig. In 1Speaker Audio
HT Receiver/L/C/R/
SL/SR/RL/RR
L/C/R/SL/SR/RL/RR
Speakers
Room connections (needed for each area that accesses audio
sources only)
1Speaker Audio Master GXR2/
Zone 1 Speaker Speakers
1CAT-5Network
Master GXR2/
Network Switch Contact
SYSTEM DESIGN GUIDE
21
(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION
SYSTEM DESIGN GUIDE
(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION
22
APPLICATION: INTEGRATING ONE OR MORE HT-MSU CONTROLLED THEATERS AND AN IR ONLY
CONTROLLED THEATER WITH AN INTELLICONTROL ICS SYSTEM
SYSTEM DESIGN GUIDE
23
(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION
INTELLIFILE3 PROGRAMMING STEPS
UPDATE PROGRAMMING SOFTWARE
Always update your software to the latest version of IntelliFile3 before installing any products. IntelliFile3 can be
downloaded at www.intellicontrol.com/techsupport
UPDATE FIRMWARE
All units must be hard-wire connected to the GXR2 during  rmware update. Always perform a  rmware update on all
previously installed IntelliControl ICS products before adding new products. Follow this sequence:
1. Upload previous programming from the GXR2
2. Firmware update the current system
3. Unplug the GXR2
4. Connect the new products to the GXR2
5. Reconnect the power to the GXR2
6. Perform  rmware update on the new products, including the HT-MSU and the iRemoteTS
7. Upload previous programming from the GXR2 again
PROGRAMMING SEQUENCE
ALL UNITS MUST BE HARD-WIRE CONNECTED TO THE GXR2 DURING PROGRAMMING:
1. Perform MultiZone programming  rst
and upload to the Master GXR2 and
iRemoteTS’s
2. Perform home theater programming and
upload to the HT-MSU’s
3. Upload the home theater programming
to the iRemoteTS’s
4. Locate all wireless devices to their  nal
position in the installation
5. Perform a “Reset Net” from the installer
screen of one of the End-Points
(iRemote, iRemoteTS or wireless keypad)
SYSTEM DESIGN GUIDE
(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION
24
NOTES:
SYSTEM DESIGN GUIDE
25
(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION
NOTES:
(800) BUY-HIFI or 305-238-4373 NILES AUDIO CORPORATION
26
WARRANTY
All Niles products are manufactured with reliability in mind and backed by
factory warranties against defects in materials or workmanship. For details,
see warranty statement included with each product.
We are eager to hear your product suggestions.
Please e-mail your suggestions to: productsuggestions@nilesaudio.com
Niles strives to constantly improve our products,
all specifications may change without notice.
CUSTOMER SERVICE - TECHNICAL SUPPORT:
ADDITIONAL INFORMATION
©2010 Niles Audio Corporation 12331 S.W. 130 Street, Miami, FL 33186 Tel: 800.289.4434 or 305.238.4373 – www.nilesaudio.com – All rights reserved. Niles, the
Niles logos, IntelliControl, SmartDock, IntelliFile, Transport and iREMOTE are registered trademarks of Niles Audio Corporation. All other trademarks are the property of
their respective owners. Niles reserves the right to change specifi cations and descriptions without notice. The technical and other information contained herein is not intended
to set forth all technical and other specifi cations. LT00305A
BY PHONE (IN USA OR CANADA)
1-800-BUY-HIFI (289-4434)
BY PHONE (OUTSIDE USA)
1-305-238-4373
CUSTOMER SERVICE HOURS
8:00 AM to 5:30 PM ET
TECHNICAL SUPPORT HOURS
8:00 AM to 7:00 PM ET
ON THE WEB
www.nilesaudio.com
EMAIL TECHNICAL SUPPORT
techsupport@nilesaudio.com
EMAIL FOR PRODUCT SUGGESTIONS
productsuggestions@nilesaudio.com
Niles Audio Corporation
12331 SW 130th Street, Miami FL 33186 Tel: 800-BUY-HIFI or 305-238-4373 – Fax: 305.238.0185 – www.nilesaudio.com

Navigation menu