Svantek SV 104IS User's Manual SV104IS User
User Manual: Manual
Open the PDF directly: View PDF
Page Count: 77
- GENERAL WARNINGS, SAFETY CLAUSES, AND STANDARD INFORMATION
- HAZARDOUS AREA INSTALLATIONS SPECIFIC INFORMATION
- SPECIAL PRECAUTIONS WHEN USING AND CHARGING LITHIUM BATTERIES
- MARKING OF THE UNIT
- 1 INTRODUCTION
- 2 KIT COMPONENTS
- 3 GETTING STARTED
- 4 RUNNING AND OPERATING BASIC PROCEDURES
- 4.1 CHARGING
- 4.2 Before you turn the instrument on
- 4.3 Turning on/off
- 4.4 Battery check
- 4.5 Reviewing unit label
- 4.6 Measurement setups - basic configuration
- 4.7 CALIBRATION
- 4.8 Voice comments recording
- 4.9 Before and after measurement run
- 4.10 Starting and stopping measurement run
- 4.11 Auto-run mode information
- 4.12 Security lock
- 4.13 Mounting and positioning the SV 104IS
- 4.14 Reviewing measurements
- 4.15 Resetting the dosimeter
- 5 SUPERVISOR BASIC OPERATIONS
- 5.1 Installing and connecting to PC
- 5.2 Main software window
- 5.3 Instruments inventory panel
- 5.4 Instrument options unlock
- 5.5 Advanced configuration setup
- 5.5.1 Working with configuration setup files
- 5.5.2 Profile settings tab
- 5.5.3 Measurement parameters settings tab
- 5.5.4 Time-history data logging settings tab
- 5.5.5 Display VIEW configuration tab
- 5.5.6 Octave analysis Spectrum configuration tab
- 5.5.7 General settings tab
- 5.5.8 Auto-Run settings (timer, pauses) tab
- 5.5.9 Recording options tab (optional)
- 5.6 Working with data files
- 5.7 Working with sessions and reporting
- 6 SV 104IS MAINTENANCE
- 7 RISK ASSESSMENT AND MITIGATION OF RISK
- 8 SVANTEK SERVICE