Maono Technology 21001 Mouse User Manual 2
Shenzhen Maono Technology Co., Ltd. Mouse 2
User Manual
Package includes: Operating System: 1 x Optical Bluetooth mouse 1 x Charge cable 1 x User manual Windows 2000/XP Windows Vista Windows 7/8/10 Mac OS X Main Features: -3 levels of DPI 800/1200/1600 -Built-in software with interface that is compatible with Bluetooth 2.0/3.0 -Frequency band: 2.4-2.4835GHz unlicensed ISM band -Receiving sensitivity: -75bm (Standard) -RF output power: < 4bm (minimum radiates) -Operation distance: 10 meter without obstacle, or 8 meter -Operating temperature: -10-55℃ -Humidity: 20%-50% -Power Save Mode: The mouse will cut power save mode if not used for about 8 minutes. Wake it by pressing both mouse buttons (Button 1&2) and scroll wheel (Button 3) simultaneously. Instruction: 1.Left 3.Wheel Click 2.Right 6.ID Button 5.ON/OFF 4.DPI Button 7.LED Optical Engine 8.Non Slip Mat Troubleshooting: 1.The mouse cannot power on? Make sure the batteries are charged. 2.The mouse cannot pair with computer? Verify that your computer is Bluetooth enabled. (has Bluetooth Function) Verify that the pairing device is within range (10 meter), and powered up , and then attempt the connection again. Delete all other Bluetooth devices connection in My Bluetooth Places and pair the mouse again. Make sure you follow this instruction correctly. Turn on the mouse again, and press the black small match button (Button 6) before you try to scan for the mouse on your computer. 1.Full charge is recommended before first use. 2.Charge with USB cable plugging to power source or computer. Blue light means charging. 3. After full charge, unplug USB cable and turn on Bluetooth of your PC. 4. Turn on the mouse (Button 5) and press the black small connection ID button (Button 6) at the bottom of the mouse until blue light blinks which shows that the PC is ready to connect. 5. Click “Bluetooth Mouse” on your laptop/ desktop to connect to PC after the computer finishes detecting the Bluetooth device, then the setup is completed. 6. With Auto Stand-by and Sleep Mode, press both mouse buttons (Button 1&2) and scroll wheel (Button 3) simultaneously to set up when it happens. 7. By activating DPI button, the mouse will change tracking sensitivity from 1600 DPI to 800 DPI. (the default DPI is 1200) 3.Bluetooth device doesn't work after computer wakes from sleep mode? In the Device Manager, change the Bluetooth wireless adapter power settings: 1.Go to Control Panel > System and Security > System > Device Manager In Device Manager, expand Bluetooth Radios, right-click on the Bluetooth wireless adapter (ex. Dell Wireless 370 adapter), and then click Properties. In the Properties window, click the Power Management tab and uncheck Allow the computer to turn off this device to save power. Click OK. Restart your computer to apply the change. The connection between the mouse and the computer can be lost also for several reasons, such as: (1)Low battery power (2)Using your mouse on metal surfaces (3)Radio frequency (RF) interference from other wireless devices, such as: (1)Wireless speakers (2)Computer power supplies (3)Monitors (4)Cell phones (5)Garage door openers. Try to rule out these and other possible problem sources that might be affecting your mouse. Warnings: Please move the mouse only on a dark, smooth surface (e.g. A customary mouse -pad), not on transparent materials like glass. Please shut down the Bluetooth mouse if the mouse will not be used for an extended period of time. The mouse buttons may be misaligned during shipping, if you have trouble clicking, try to adjust the mouse buttons by slightly polling them upward and press them backward. Warning Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modi?cations to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Mouse The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Profile CMM Type : Lino Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : IEC Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : HP Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Page Count : 1 Create Date : 2016:05:31 14:00:24+08:00 Modify Date : 2016:05:31 14:00:24+08:00 Producer : Corel PDF Engine Version 17.1.0.572 Author : Administrator Creator : CorelDRAW X7 Title : 未命名 -2.cdrEXIF Metadata provided by EXIF.tools