Marathon Watch CL800002 Alarm Clock with Temperature and Humidity Sensor User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	2916366
Application ID	YFYurVyozt40dKs8wydmxQ==
Document Description	User Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	205.9kB (2573751 bits)
Date Submitted	2016-03-01 00:00:00
Date Available	2016-03-01 00:00:00
Creation Date	2016-02-03 11:32:58
Producing Software	GPL Ghostscript 9.05
Document Lastmod	2016-02-03 11:32:58
Document Title	Document1
Document Creator	PDFCreator Version 1.4.1
Document Author:	kenleung

Instruction Manual
Marathon Bluetooih
Alarm Clock
with Temperature and
Humidity Sensor
CL800002VVH/CL800002GH
MARATHON
QIH
MARATHON
Marathon Watch Company Ltd.
TF: 1.800.822.4329 - T: 905.764.9420 ' F: 905.764.0035
wwwMarathonWatcncom
This device complies with Industry Canada licence-exempt RSS
standard(s). Operatlon Is subject to the followlng two condltlons:
(1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.
Warnin Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the user
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residentia Installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1)this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Statement
This device complies with Part 15 of the FCC rules. Operation
is subject to the foiiowing two conditions: (1) This device may
not cause harmful interference, and l2l This device must
accept any interference received, including interference that
may cause undesired operation,
Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void
the user's authority to operate the equipment,
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance With the instructions, may cause harmful
interference to radio communications
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment Off and on, the
user is encouraged to try to correct the interference by one or
more of the foliowmg measures:
- Reorient or relocate the receiving antenna
‘ increase the separation between the equipment and
the receiven
- Connect the equipment into an outiet on a circuit different
from that to which the receiver is Connected.
' Consult the dealeror an exoerienced radio/TV technician
for help
Japan Radio Law Statement
This product containsthe certified module byJapan Radio Law.
The certification number is 6 IE 0187140077
¥ B
AC
28
location of Control
1. Snooze button 5_ Reset
2. Alarm on/off 6. Battery Compartment
3. Pair 7. Battery door
4. Scroll
Thank you for purchasing the Marathon Bluetooth Alarm Clock.
This product is designed to work with iPad, iPhone, iPod, other iOS
devices and Android 4.3 or above devrces.
- Supports iOS version 7.1 or above
- Supports Android version 4.3 or above
- Up to 5 alarms with snooze function
- Take full control of the Bluetooth Alarm Clock with app
- Selectable alarm tone pattern and volume
- Temperature and Humidity reading with history chart
that can be read on App without alarm clock connection
- Count down timer
- Monitor the battery status ofthe Bluetooth Alarm Clock and have
battery warning if it is at low level
- Can stop alarm via App
- Operating temperature is O“C to 40° C (23° F ~ 104 ° Fl
Before you start using it:
- Please make sure to read the instruction manual carefully,
- Followmgand respecting the instructions in your manual will
prevent damage to your instrument and avoid causing your
warranty to become void.
- We shall not be liable for any damage occurring as a result of not
following these instructions. Likewise, we take no responsibility
for any incorrect readings and for any consequences which may
result from them
- Please take particular note of the safety aovrcel
- Please keep this instruction manual forfuture reference
Disposal at Your Old Product
Vour product is desrgned and manufactured With
high quality materials and components, which
can be recycled and reused. When this crossed-
out wheeled bin symbol is attached to a product
lt means the product is covered by the European
Directive 2002/96/ECt Please inform yourself about
the local separate collection system tor electrical and
electronic products.
Please act according to your local rules and do
not dispose of your old products with your normal
household waste. The correct disposal of your old
product Will help prevent potential negative
consequences for the environment and human health.
Disposal at Flat Batteries / Accumulator:
YOU, 35 the end user, are legally obliged (Battery
Ordinance) to return all flat batteries and
rechargeable batteries.
Disposal in the household waste is prohibited,
"European Directive 2006/66/EC” Batteries, Including
rechargeable batteries, which Contain hazardous
substances are marked by symbols which Indicate the
prohibition of disposal in the household waste, The
desrgnaticns for the heavy metals concerned are as
follows:
Cd = cadmium, Hg = mercury, Pd = lead. You can
return flat batteries / rechargeable batteries free of
charge to the collection points in your community or
anywhere where batteries/ rechargeable batteries are
Sold. You thus fullill your Statutory obligations arid help
protect the environment.
Caution
Replace only with the same or equivalent type of
battery, please refer to the engraved battery marks
inside the battery compartment for the correct battery
polarity H) and (7). Danger of explosion is possible if
battery is incorrectly replaced.
This product complies With the requirement of the
1999/5/32 directive.
Use this unit and mobile phone only in envrronments
with ambient temperatures between 0°C and 40"C.
And the maximum operating temperature of the unit
is 40 “C
27
Cure of your Bluetooth Alarm Clock
Getting Started
- The unit should not be exposed to dripping or splashing of liquid,
- Do not expose unitand/or batteries to liquid, sand or
excessive heat.
- No objects filled with liquids, such as vases, shall be placed on
the unit.
~ Do not cover the unit, Allow adequate space with a small gap
between the buzzer holes and surrounding surfaces.
' To clean the set, use a soft dry cloth. Do not use any cleaning
agents containing alcohol, ammonia, benzene or abrasives as
these may harm the housing.
Manufacturer reserves the right to update the contents of this
manual and App,
26
1. Install battery
11 Open the battery compartment.
1.2 insert 2 x AA Size batteries in polarity (+) and (r) as indicated.
1.3 Close the battery compartment.
2. Install Clock System App on your devrce.
2.1 Access App Store or Google play search for Clock System
2.2 Select and install Clock System App on your mobile device.
Please Note:
User manual is based on OS version and may differ with Android
version which will be specified as supplementary information at
bottom of relative page.
Scroll Funclion
Pairing ihe Blueioolh Alarm Clock
3. Pair the Blueioolh Alarm Clock with Clock System App.
‘Temperature and humidity with clock mode'
3.1 Before running the Clock System App, make sure your device
has Bluetootn enabled. ' ' Ll r1fllv 9
3.2 After you tap the app iCOl’i , the ‘Nearby Devices’ screen 7::IE 3H
@ [ °[
appears. You need to pair me Biuetooth Alarm Clock devrce
before you enter the main app screen.
summwammm
/I()> <12? @i I®>c©>
.‘ I “clock with alarm time mode"
(show if any alarm enabled)
® @M’L :JHW
sufi Mo w wag»: an
(CA @I« @i IE)» :39
MA R ATH ON
iOS Version
WT TIMER mode
' (only if the timer I5 running)
ELE MW cm
@“Ai }: sv’H suMomen-IFRSA
(@9431 @I (A) ((6)
Android Version 14.2 In autorscroliing mode, each mode will stay 3 seconds and
then switch to next display.
25
iii
Scroll Function
14. You can press the [Scroll] button on the Bluetooth Alarm
Clock to switch between different information manually.
Or you can press and hold the [Scroll] button to enable/
disable autorscrolling display function.
14.1 The scrolling display will be in following order:
“Clock with calendar mode"
.. . THU?
IE-Jil lag.
®
(Dr (73a @l @i @a
“Calendar mode"
® lg"? 2355:?
GS? @l is» (a; re,
24
Pairing the Bluetoolh Alarm Clock
3.3 Tap“ Fair New Device" to search for nearby devices.
3.4 Press and hold the [PAIR] button on the Bluetooth Alarm Clock
device for 5 seconds. You will see that the a icon will start
to blink on the clock
gleam,
DawNMt um“,
NW m cm. ax.
iOS Version Android Version
3.5 The new Marathon Bluetootn Alarm Clock will be displayed
on the App and is ready for pairing. Tap the Marathon
"Bluetooth Alarm Clock" to start the pairing and connection
process. Once the Eluetooth Alarm Clock + is paired, it will
start time and data synchronization. 5
Pairing the Bluefoolh Alarm Clock Offline Temperature and Humidity Reading
133 When the Marathon Clock and App are offiinei user can
stili read the latest history record from the last connection
by tapping the chart icon on the right hand side of specific
unit list in Nearby Devices screen.
..... , u .m x -»
Nearby om: g
Mu Wm
Far New Device
®
MARATHON
iOS Version
—m . ..i
'Nmmm (+1
Man/‘ssz‘ ‘
m... asm m ;i
Android Version
3.6 After the connection is made, the following information
WIN be synchronized:
i) Current time and date ®
ii) Aiarms&timer setting MARATHON
iii) Unit battery ievel
iv) Temperature and Humidity history Android VBTSiOH
Temperature and Relative Humidity Pairing the Bluetooth Alarm Clock
132 The unit can accumulate temperature / humidity readings
up to 7 days. To read the data tap the conditions then go
into the historical chart showing temperature / relative
humidity reading by time and date, including the maximum
and minimum record of each day. Number of historical
records stored in app depends on yourdevice memory.
No Bluetooth
connection
Note:
(Resetting the unit will clear all memory stored in the unit
and the record in app after synchronization.)
OHM-mm
..... g t- M. mm t-
( Done MarysAlm Lil ( Done mem m
mow m, mam“
Bluetooth establishing
connection
9E 237‘ 23,5? 250° g5 0° 26.?”
59M 53% 95% s3%
*3 to 5
. . W Bluetooth connected
'05 Version successfully
“I“ m
@mamm n... _
4 NW »
:5“ 217' 25 r» f‘ w .m w 2: 2 3.7 When the Bluetooth Wall Clock is paired with one device‘ clock
‘ ' must be reset to pair With other devrces.
3.8 One device can pair with a maximum of 5 Bluetocth Alarm
Clocks at once.
52'; 5r 1 54x 54% 52» 57%,
Android Version 22 7
Rename lhe Blueloolh Alarm Clock Temperature and Relative Humidily
4V Rename the device 13‘ Current Temperature and Relative Humidity (Conditions)
Tap the device name [default is “Bluetooth Alarm Clock") at the m. m, 2..)
top of the screen to edit the device name. (m Mamum I n
M, WM” 3
G 0'; AN
(ume J ‘rLtAlarwiLincK m (We Wymm l , . , i _ ( on A.“
i ii i t, d: w
i '2 ‘i
’ V i
7 2: e I.
i i , i i w.
0 W E R' T v U I o p iOS Version Android Version
A S D F G H A K L
l 1
Z X C V E N NI j
E A i «26 a r, em. .m \'
iOS Version —]‘
n E! a g
_EL‘F_‘K3'-I mm ; Mary‘s um i
< , ~ 1:?” "i
J3 AM 9 on AM In \
/g as w c on AM \
/ ‘ L, nu AM - /
1 2 a 4 5 s 7 a 9 u
, ‘ /
€CD,\M G W E R 1 V U i 0 P ,/
QDOAM ASDFGHJKL
.. 9 z x c v a n M u 131 The unit can measure temperature and relative humidity.
000 DU 9," m ._ r m The current temperature and humidity reading will be
shown on the App or you can browse it on the Bluetooth
Android Version Alarm Clock LCD screen by pressing the “Scroil” button.
8 21
Reset the Blueloolh Alarm Clock
Battery Status Indicator
12, Reset the Bluetuoth Alarm Clock
If the Bluetooth Alarm Clock Is not working properly, try to press
RESET button to resume default setting. The LED flashes twice
in (purple) colour, then the LED will flash once per 6 seconds
in red colour.
Mainly P-lred Dame
m 5mm mm mm
W m l. rum“ u: WM
WW x Demons “mm
would mm“: mm
m xmngn
m,» R2110":
cum ax
iOS Version Android Version
After reset, all data in the Bluetooth Alarm Clock is deleted,
Press and hold the [PAIR] button again to re-pairthe Bluetooth
Alarm Clock. If it has been paired previously with the same device,
you can select “Restore" to resume all setting and data or select
“Erase" to start all from scratch.
20
Battery status indicator:
Indicates the battery level of your Bluetooth Alarm Clock
device. When the battery level drops below 20%, the battery
icon is ln red status and a low battery warning will pop up as a
reminder to replace the battery
Meanwhile, low battery indicator icon will be shown on the
alarm clock LCD.
..... , w ,—
(Dow ammo.) g
_ my
Above 60% IE ”6.400 am
6:00 am e
_ 0
Between n.
Wamlug
20% ' 50% a flifilm‘”
_ 6le am
Below 20% El W
6:00 am \
E 9 “9 ‘?
iDS Version
Above 60% El
Between Warning
20% ~ 60% w
Below 20% D
Android Version
Setting the Alarm Time
Preference
6. Settingthe alarm time
6.1 Each Marathon Bluetooth Alarm Clock can set up to a
maximum of 5 Alarms. On the main screen, tap individual
alarm leg. Alarm 1) to enter the alarm settlng page.
.—
sm mum
a on am 3 as m
iOS Version Al'ldl‘Old Version
®
MAnArHoN
unamw‘
6.2 The alarm setting screen appears. You can edit and adjust
different items on this screen, which include:
i) Alarm Name: Tap alarm 1» 5 to edityour preferred name to
this alarm.
ii) Time: Tap to adjust the time for this alarm.
ill) Day of Week: Tap to select which day of week to enable
the alarm.
, If none are selected, the alarm will only sound once.
- If all days are selected, it will sound daily.
iv) Sound pattern: Tap to select which tone pattern (5 patterns
plus one random pattern available) is applied to this alarm.
10
11.1
11.2
11.3
11.4
11.5
11.6
11.7
Snooze Enabled: Tap to select ON/OFF to ena ble/dlsable the
Snooze function. ltSnooze Enabled is ON, you will have two
more options, whlch are:
Maximum Snoozes:
The maximum number of times to repeat the snooze
function, which can be set to Unlimited or values from in: 9.
Snooze Duration:
The time duration otv snooze function, which can be set
to values from 1 to 15 Minutes.
Alarm Sound Duration:
The alarm duration, which can be set to values from
1 to 15 minutes.
Auto DST update:
It will adjust Daylight Saving Time (DST) automatically based
on yourdevice time Zone setting. The alarm clock will be
automatically one hour ahead of Standard Time in summer
time and will be back to the normal Standard Time when
back to wintertime, accordingto your devices time zone.
Scroll Display:
Turn on to enable the LCD screen to switch automatically
(screen detail please referto point 14)
Temperature: Select ‘0 or ‘F
Time Format: Select 12 or 24 hour format
Date Format: Select MM / DD or DD/ MM day format.
19
Preference
Setting the Alarm Time
11. Preference setting
Tap the a /
and adjust the following items on this screen.
nme Farms!
new, wmn
VVVVV e .-. .... ._
(Doha WWW m (rm Mum
Amusrwm
swam“ (
‘uezune
n Hm mm A.
“W‘WWWW Smell owl-:1
mu mm WWW" :—
MWM :- fimram :-
_ - wmm mm
M- Fm" M
mm Emma:
Wm WM
Scroll bum
mm..."
mm“:
Amonsnhdn
Small mva-v
Vuuwnutum
Ylne Forum
mm mm
m or mm
W mule,
Andrnld Version
3 to enter the Preference screen. You can edit
18
V)
Alarm volume level: Tap to select the alarm sound volume level
(three options: Low, Med and High).
6.3 Complete the alarm setting.
I)
Tap {Donel/ to save the alarm setting and turn on
the alarm.
Atthe main screen, user can turn the alarm on / off by
scrolling the (J rlght and left.
....- um a- . mm :-
11erw Dewe
®
MARATHON
iOS Version
6.5 Stop the alarm during lockscreen. (iOS version only)
i) An alarm notification wrll pop up on the lockscreen. Swipe
right on the notification and tap “Alarm Cancel" to stop alarm
or “Snooze" to enter snooze mode.
ii) For Android version, the notification icon appears at the top
of status bar Slide down the status bar to show the
notification and tar: “Alarm Cancel" to stop alarm or "Snooze"
to enter snooze mode.
12
10. Delete the Marathon Biuetooth Alarm Clock record.
iOS Version
u ow KnowB-vlul .m
Fillmore
® ® @
MARATHON MARATHON MARATHON
You can tap the Q at Nearby Devices screen to enter the Known
Devices page By tapping “Edit" and then the 9 , you can select
“Delete" to delete the Blue-tooth Alarm Clock record on the
current devrce.
Android Version
IMMM“ .MMM
Mary‘s Aim J wry: Ala'm
® ®
MARATHON MARATHON
You can tap the at Nearby Devices screen to enter the Known
Devices page. By tapping “Edit” and then the x , you can select
“Delete" to delete the Bluetooth Alarm Clock record on the
current devrce.
17
Setting the Timer Snooze Operation
9.2 Using the Timer 7. Using the SNOOZE function
In the Home screen, you can tap “Start" under Timerto
start countlng. 7.1 When the alarm sounds,
press the [SNOOZE] button
to getan extra 5 minutes
..... . an“ m . w.” :1
(pm Maw-MW (m. MMMW m ofsleep. The snooze will
repeat up to three times.
0hr Omit Osec 0hr 0min 57sec
, IT 1 t ) fl
“ V [—W T—
..... . a .. _
(Om Mwwavm a @Prmmu:
5““ m“ C W .-
_— rm“ WW,
‘ ' ’ " mlmm s m;
i N w r‘ "h" momlm 5qu
will.“ >
A“ W 5‘” " Amman m
9 cu w 9 L0 r M
Autu as? we." ( Sm" mm
u an AM u an AM Wm“. -
_ ,t W mu WWW. - ,
9w AM gnu AM
mummy-i .-
2CDMl ; rn AM WWW"
' “ ' mum. -—
u- m— ‘, mm um I-
u-on-ou mu
7W” iOS Version Android Version
'35 PC 51%
V 7.2 The above default value is set by the factory. User can set
Androld VE'S'O" the "Maxlmum Snoozes" and “Snooze Duration" m the
Then you can tap “Stop" to stop the current timer and Start" to prefe'ence screen
re—continue thetimer agaln. The timer can be reset by tapping
the [Reset].
16 13
To Turn OFF the Alarm
8. To disable the alarm
9 Jti Nvl
U 3U r'l't’i
9 Jtl AM
i iOS Version 7 Android Version
8.2 The alarm will sound for 1 minute and stop automatically.
if Snooze is enabled setting is ON. the alarm will repeat every
5 minutes. You can press the [Snooze] button to interrupt the
alarm momentarily, or can press [Alarm] button to turn off the
alarm and stop the snooze function completely.
8.3 User can tap the alarm time to disable the alarm completely
(Please make sure your app is paired with the device)
14
Setting the Timer
9. To set the timer:
Tap timer on main screen and go into timer screen.
< Dane Mary; New
0 iv a rmr 0 59¢
, 4 xi
iOS Version
Android Versmn
9.1 Vou can edit and adjust the following items on this screen:
i) Timer period:
Scroll to adjust the timer period.
ii) Sound pattern:
Tap to select the tone pattern (5 patterns plus one random
pattern available).
iii) Sound volume level:
Tap to select the sound volume level 15
(three options: Law, Med and High).

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 16
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:53619e3f-cc82-11e5-0000-8ede5424e51d
Producer                        : GPL Ghostscript 9.05
Keywords                        : ()
Modify Date                     : 2016:02:03 11:32:58+08:00
Create Date                     : 2016:02:03 11:32:58+08:00
Creator Tool                    : PDFCreator Version 1.4.1
Document ID                     : uuid:53619e3f-cc82-11e5-0000-8ede5424e51d
Format                          : application/pdf
Title                           : Document1
Creator                         : kenleung
Description                     : ()
Author                          : kenleung
Subject                         : 

EXIF Metadata provided by EXIF.tools